All the client switches becoming STP ROOT switches
Hi All,
Here is my topology. I've two vlans (50,60). I was doing some lab so just build this topology and when i check the the spaning tree configuration on all the switches except the two transparent switches. All the client switches have become ROOT switches for VLAN50,60.
I've give the below commands on the VTP-Server, but still the problem is not clearing.
VTP-SERVER(config)#spanning-tree vlan 1 root primary
VTP-SERVER(config)#spanning-tree vlan 50 root primary
VTP-SERVER(config)#spanning-tree vlan 60 root primary
"show spanning-tree" outputs:
Output from VTP-Server:
Output from Client1:
Output from Client2:
Output from Client3:
Can someone please correct the issue?
Thanks in advance.
Regards,
Chandu
Perfect - Rolf. Issue resolved.
I understood it. Since both the transparent switches are not having vlan50,60 they are not participating in the STP calculation for those two vlans.
Since those two switches are not participating in the STP calculation. For every switch it seems like it is the only switch in the topology, so STP made them ROOT switches, got it...
Really playing with devices like anything.... but however learning like this is very good...
Thanks a lot for your help again.
Regards,
Chandu
Similar Messages
-
How to get all the client independent tables in SCM
Hi Guys,
I want to know all the client independent table is SCM. Can you guys help me please.
Regards,
KumarHi Kumar,
Generally, Data of SAP system control data, language indicators, and transaction
codes are stored in client independent tables.
A table attribute in the Data Dictionary indicates whether a table is client-specific
or client-independent.
Regards
R. Senthil Mareeswaran. -
How to chek the sap users from all the clients
Hi Experts,
I have a server which got 3 clients
100, 200, 300 and I want to check out all the users of 3 clients at one shot
Please let me know how to check this?
Thanx in advance
Regards
JawedHi,
I am afraid table USR02 is client-specific. Using display you can only view the records which belong to your current client.
You can use Tcode USMM (User measurement data)- User classification lising and view all the client users you need, or use report (RSUVM005) in se38.
Thanks,
George -
Formscentral is not working again. All the open forms become blank either in IE or Chrome. Please check.
Yes, we're still working on it. I will update the Announcement at the top of the forum as we have more of an update.
Thanks,
Josh -
Formscentral is not working. All the open forms become blank either in IE or Chrome
Formscentral is not working. All the open forms become blank either in IE or Chrome
We are working to resolve this, we are aware of the issues and hope to have things running normally ASAP... I posted an announcement at the top of the forums which I will update or remove when things return to normal.
Thanks
Josh Corey -
How to get IP Address of all the clients
Hi,
I am useing oracle 8i on sun solaris and clients are of windows
when quering v$session it gives many details
but does not gives the IP_Address of the clients.
I had used SYS_CONTEXT('USERENV','IP_ADDRESS') but
it gives the details of only the current session.
But I want the IP_Address of all the clients connected and
shown in v$session.
Regards
Arun TayalHi,
From column MACHINE in V$SESSION, you can get the I.P. address:
SQL> select UTL_INADDR.GET_HOST_ADDRESS('localhost') from dual;
UTL_INADDR.GET_HOST_ADDRESS('LOCALHOST')
127.0.0.1In this sample I used localhost, but you can use the column. It might require some additional work (to escape windows domains for example - and ensure all the hosts are known to the system via DNS).
HTH,
Yoann. -
How to force site code discovery on all the clients, Migration SCCM 2007 to SCCM 2012
HI,
I migrated SCCM 2007 to SCCM 2012 SP1, but the clients does not update the New Site Code Automatically, if I click on Discovery option the client find the new site, but I need do this automatically because are too many clients.
This registry key does not exist on client computers.
HKLM\Software\Microsoft\SMS\MobileClient\GPRequestedSiteAssignmentCode
HKLM\Software\Microsoft\SMS\MobileClient\GPSiteAssignmentRetryInterval(Min)
HKLM\Software\Microsoft\SMS\MobileClient\GPSiteAssignmentRetryDuration(Hour)
Any Help?
Thanks.Hello ICH-CR,
Thanks for writing to the SysCtr ConfigMgr forums.
I think there are multiple solutions to this issue and you can choose whatever fits best to your scenario.
1. While upgrading the clients from SCCM 2007 to 2012 you can assign the clients to your ConfigMgr 2012 site.
http://technet.microsoft.com/en-us/library/gg682060.aspx#BKMK_AutomaticAssignment
You just need to ensure that you have a boundary group and boundaries. More details on
http://technet.microsoft.com/en-us/library/13694ac5-8f3b-42a9-8040-b23f21c79637#BMBK_CreateBoundaryGrp
I would suggest the first method because if you create another child site, you shouldn't have to reassign the clients back again. If that is unlikely then use the following script which is method no 2
2.
http://gallery.technet.microsoft.com/scriptcenter/Change-sccm-configmgr-cf6e0327
This is a VBSCRIPT and can be ran from a network location using the PSEXC
3. Here is a smaller script
'Replace with your Site Code sSiteCode = "EnterNewSiteCode"
sMachine
= "."
set oCCMNamespace
= GetObject("winmgmts://"
& sMachine & "/root/ccm")
Set oInstance
= oCCMNamespace.Get("SMS_Client")
set oParams
= oInstance.Methods_("SetAssignedSite").inParameters.SpawnInstance_()
oParams.sSiteCode
= sSiteCode
oCCMNamespace.ExecMethod
"SMS_Client",
"SetAssignedSite",
oParams
You can use this script as a logon script .
Anurag
Microsoft Certified Professional| Microsoft Certified Technology Specialist (ConfigMgr)
This posting is provided 'AS IS' with no warranties or guarantees, and confers no rights.
My Blog
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
How to get a list of all the clients logged in to the network
hiii
how can i fetch a list of all the users who are currently logged on the network...so that the list can then be sent to a database..plz tel me what techniqe can followed to do this....thanxhiii
how can i fetch a list of all the users who are
currently logged on the network...Easy, nobody logs onto the network so this is always nobody.
You may be asking, how do I determine all the users who have logged in to all the PCs on the network.
Write a program which is added to each user's Startup a program which updates the database with their details. If you have network scripts, this can be added to the user' network login batch script. -
pictures switch to the left leaving a white blank area on the left of the page. I contacted Time Warner and they told me you are the one to correct this problem...I hope you can...please let me know when
this situation is resolved...Thank you. [email protected]I assume this page worked normally in Firefox 22?
Firefox 23 introduced a new security feature. If this is an HTTPS page, insecure content may be blocked. Look for a shield icon on the address bar to the left of the URL. This article has more details about this feature: [[How does content that isn't secure affect my safety?]]
If it's not a secure page or there's no shield, here is a more general suggestion.
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help? -
ECC Client switch to SCM 7.0
Hello,
We are planning to switch our ECC Development client from 120 to 130 which is already connected to SCM system and has data related to ECC 120.
When switch the ECC client from 120 to 130 and run the Integration Models again, what are possibilities of SCM system data to become junk or Inconsistent?
1). SCM data needs to be scrambled before we run the Integraion Models from New client?
2). SCM data gets appended with new Data from new client?
Kindly provide your views...
Thanks,
ArjunArjun
It depends on which modules of SCM you are using. If you are using DP integrated with a BI system, the Infocubes/ Time Series Data could be inconsistent after switching. If you are using GATP with Product Allocation (again due to DP/ BI linkage), you could have the same issue.
Other than that you might be ok if you simply do CIF initialize (RIMODINI) and also do a Transaction data reconciliation (/SAPAPO/CCR).
As far as possible, my opinion is that it is always better to rebuild the SCM system everytime the connected ECC client changes rather than attempt to clean it. The reason is that should anything look funny in Development (either due to an enhancement or while testing standard functionality), you will always be thinking in the back of your mind that it might be due to the client switching. The fewer wild cards you introduce in your development environment, the better off your testing.
Rishi Menon -
The customer is considering to implement client switch functionality in interaction center for CRM7. Are there implications for this scenario if one of the CRM/ERP pairs is unavailable due to outage?
regards,
bill.Hello Suvitha,
Sure, the Client Switch scenario is designed for situations in which you need to keep data from different customers completely separated and secure. For example, this is commonly used in business processing outsourcing (BPO) situations where a company provides call-center hosting for a number of different companies. When a customer calls, the system recognizes the caller and pulls up the record from the correct SAP CRM client. Here are some more details:
[http://help.sap.com/saphelp_crm60/helpdata/en/ee/59d9aff0fc4a2fb48d73a0cf93c90c/content.htm]
[http://www.sap.com/community/webcast/2008_06_SAPSkills_de/2008_06_sapskills_de_F5.pdf]
Best regards,
John -
WAP 321 disconnecting all associated clients
Hi Support,
I am a newbie technical support. Currently, I encountered a issue about WAP321 that will occasionally disconnecting all the clients(about 7 clients only) in one shot and cannot connect back at all. However, after login to the Web Gui and reboot the WAP321. It is able to connect again.
I had upgrade the firmware to 1.0.4.2 but the problem still exists. The AP is using only WPA2-Personal.
The environment of the AP is like this:
Internet->Watchguard Firewall (with AP too but different SSID with the WAP321, flat vlan) ->switches and WAP321
Is that any misconfiguration of the AP or the network environment cause this issue?
Another problem is the time of the AP cannot be fixed. I had tried either set the time using NTP (port 123 is opened in firewall) or manually input but it will revert back to 1999 after reboot.
Thanks in advanced!Hi Support,
I am a newbie technical support. Currently, I encountered a issue about WAP321 that will occasionally disconnecting all the clients(about 7 clients only) in one shot and cannot connect back at all. However, after login to the Web Gui and reboot the WAP321. It is able to connect again.
I had upgrade the firmware to 1.0.4.2 but the problem still exists. The AP is using only WPA2-Personal.
The environment of the AP is like this:
Internet->Watchguard Firewall (with AP too but different SSID with the WAP321, flat vlan) ->switches and WAP321
Is that any misconfiguration of the AP or the network environment cause this issue?
Another problem is the time of the AP cannot be fixed. I had tried either set the time using NTP (port 123 is opened in firewall) or manually input but it will revert back to 1999 after reboot.
Thanks in advanced! -
Retrieving all the current machine details in the network
Dear Friends,
It will be extremely helpful for me if any one can send source code for finding all the currently switched on machines in a network for a urgent project work
If anyone find details related to this please mail to
[email protected]A computer management solution that is not very expensive is Big Brother ( http://www.bb4.com ).
From the site
Big Brother monitors System and Network-delivered services for availability. Your current network status is displayed on a color-coded web page in near-real time. When problems are detected, you're immediately notified by e-mail, pager, or text messaging.
Big Brother is Free for Non-Commercial Use
We believe that everyone should have access to Big Brother. The original Big Brother is free for non-commercial use, as defined by our Better than Free license.
Big Brother is provided in source code format for Unix and Linux, and precompiled for Windows NT, Windows 2000 and Windows 2003(client only). User contributed clients are also available for Netware, Mac OS/9, VMS, AS/400 and VM/ESA. -
Filter off all the unwanted org elements from the selection screens
Hello all,
The client does not want to see SAP predelivered organization elements in the production system.
Is there a way to achieve this globally, by some kind of filter applicable to selection screens of all transactions?
Just to be clear- i do not want to do this for every transaction separately. neither will security set up help, because it becomes voluminous.
Highly appreciate your inputs in this regard.
best regards,
SriniUse a searchhelp exit for the relevant search helps. There are manyy but less than transactions
Matthias -
VTP client spontaneously becoming server?
Hello all,
I recently heard of an instance in which a VTP client was connected to a network without first being erased or having it's VTP revision reset to 0. The revision number on this client was higher than that of the network it was connected to and, according to the person I was speaking with, the vtp client promoted itself to vtp server and wiped out their vlan config.
My question is: Can this actually happen or has someone fed him a line? I've never heard of that occuring and cannot find any documents referencing anything like that.
Thanks,
--jesseThis does indeed happen. It's not that the client has become a server, it's just the normal behavior of a client is not what you might expect from its name. The VTP domain can be updated by clients as well as by servers; all that is needed is a higher configuration revision. The only difference between a server and a client is that the CLI in a client will not allow you to modify the database.
Kevin Dorrell
Luxembourg
Maybe you are looking for
-
Can No Longer See Photos After Double Click to Edit
Photos and videos only visible as thumbnails. When double click to edit, cannot see. However, can double click on books and see them in edit mode. All photos still located in iPhoto Library. Have run backup and gone through all four options for datab
-
Apache Plug-in wont re-direct.
I'm trying to use the apache plug-in to redirect traffic to my non-clusterd weblogic server but I can not get it to work. I'm trying to route everything to Weblogic. It loads the weblogic plugin but I never get re-routed. Any help is appreciated. Tha
-
Test of forum edit problem by a Moderator
Adding some test text in a quetion. Possibly forum quotes feature has damaged editing feature. ''edited by the-edmeister - 01-02-2015 17:47 CST'' blah blah blah Also are we shooting ourselves in the foot, giving a warning and effectively blocking our
-
Tbale Data Not picked from Child Table while configuring Database Adapter
Hi, we are experiencing problem while picking multiple records from child table while polling from the database. details are, lets say we have one Parent table "Student (Id ,College) and one Child Table (Id,Book,Author) Id is Primary key in Student T
-
USPS Print initialization causes Reader launch - never did before
Mac 10.6.8 Adobe Reader 10.1.0 Safari Browser 5.1 When using Click N Ship from USPS, at the print point, at least for the past number of years, when ok to print is clicked, the Adobe print initialization box popped open and you would select 'ok' to p