All the cluster services missing

I'm trying to setup the rendering farm for 5 MacPro but I couldn't see any available service node in the Qmaster for me to setup. I've share all the service for the computers but I still can't see non of it available in the cluster. Anyone can advise or help on this?

hi Russ,
I'm using same versions for all OS (10.7.5), Compressor (4.0.5) and Quicktime (10.1) on each machine and all connected via ethernet. I've share the cluster node services to compressor for all across the MAC as screen shots below.
The thing is I couldn't see the available service node at Qmaster service browser. Not even the master controller 1. I'm lost right here.

Similar Messages

Conversion from .pdf to .docx: I have converted a text in Slovenian in .pdf, but all the accents are missing in the converted .docx. version

Conversion from .pdf to .docx:
I have converted a text in Slovenian in .pdf, but all the accents are missing in the converted .docx. version.
Does Adobe have a converter for texts with European-language accents, or shall I cancel my subscription?

Subscription for what: ExportPDF or Acrobat?
[topic moved to Acrobat.com Services forum]

The Cluster service is shutting down because quorum was lost

Hi, we recently experienced the above issue and after looking for explanations I haven't been able to find any satisfying answers when other people have posted this issue.
Our problem is as follows:
2 node 2008R2 cluster running SQL 2012
Each node is a HP BL460c running in a HP C7000 Blade Chassis.
We were updating the flexfabric cards on one of the chassis. The other chassis had been patched the previous week with no problems.
During the update process the flexfabric cards, which hold the Ethernet and FC connections, reboot so before work had begun all active cluster services had been failed over to the node in the chassis not being worked on. However despite this the cluster
service shut down on this one particular cluster. All other clusters running across these 2 chassis continued to run as expected.
As other people have posted before we saw the following errors in the system log.
1564: File share witness resource 'File Share Witness' failed to arbitrate for the file share
1069: Cluster resource 'File Share Witness' in clustered service or application 'Cluster Group' failed.
1172: The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk.
Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected
such as hubs, switches, or bridges.
However we cant understand what could cause this to happen when the service is running on the node in the chassis not being updated, especially when the same update was performed the week before with no issues. How can both nodes lose connectivity
to the File Share Witness at the same time?
Cluster Validation tests run fine and don't highlight any issues. The file share witness is accessible from both servers.

Hi,
Please confirm you have install the Recommended hotfixes and updates for Windows Server 2008 R2 SP1 Failover Clusters update, especially the following hotfix.
The network location profile changes from "Domain" to "Public" in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2524478/EN-US
A hotfix is available that adds two new cluster control codes to help you determine which cluster node is blocking a GUM update in Windows Server 2008 R2 and Windows Server
2012
http://support.microsoft.com/kb/2779069/EN-US
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
Shamil

Hi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

Need JAVA API to list down all the Proxy Services in OSB Console 11g

Hi,
I need a java API to List down all the Proxy Services present in OSB Console for SOA 11g (11.1.1.5). I am in a situation where I cant use python script for the same.
any help will be much appreciated.
Thanks in Advance,
Ravi
Edited by: 899443 on Oct 1, 2012 4:13 AM

AFAIK it is proprietary.
What I do in a similar situation is to form XML for the services, package them into JAR the same way as an import JAR is packaged (creating ExportInfo resource, ...) and deploy with standard WSLT script. Works for simplest services only (direct proxies mostly) but I can also form security, alerts, throttling etc etc etc -- all in one shot.
Out of sheer interest, may I ask you a question? Why do you need to create OSB services from Java?
Vlad
http://vladimirdyuzhev.com

Using Adobe Export PDF, I converted a PDF document into MS Word. However, all the images are missing

Using Adobe Export PDF, I converted a PDF document into MS Word. However, all the images are missing--replaced by black rectangles. How can I fix this? Thanks for any assistance.

Hi Ravinder,
As I mentioned in my email to you, I wasn't able to reproduce the behavior your described. The images appear properly.
Please let me know if you have any questions.
-David

SQL query which return all the NET SERVICES which are avaiable in tnsname

hi all
how to write a sql query which return all the net services which are avaiable in tnsname.ora
Regards
s

Also, tnsnames.ora is stored on the client, and not necessarily on the server; it's possible (and quite likely) that the name I use for a database in my tnsnames.ora could be different from the name you use for the same database; conversely we might use the same name for two different databases.
Regards Nigel

Locate A list of all the Enterprise Services.

Dear All
Where can I find a list of all the Enterprise Services provided by SAP . I have PI 7.1 in my landscape. Can anyone please provide a link or a transaction for locating the entire list of all the SAP Enterprise Services which can be used with PI 7.1
Thanks.
regards
Nilesh.

Hi,
you can find anything or everything from this link.
https://www.sdn.sap.com/irj/sdn/esworkplace
http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?sap-params=cGFja2FnZWlkPURCQkI2RDhBQTNCMzgyRjE5MUUwMDAwRjIwRjY0NzgxJmlkPUFGOEZBNEQ4NjRCMDRBNTY4OEY2RDhGNjZBMTlBNDc1JmZyYWdpZD0%3d
You can download Enterprise Services also for your application and use it.
regards
Aashish Sinha
Edited by: Aashish Sinha on Feb 24, 2009 7:57 AM

Is it possible to use all the render service in a single process?

is it possible to use all the render service in a single process?, my requirement is to start the process by email or by workspace and the form shud be available in both pdf and html form for the users.Please suggest a way to implement this, really struggling on this.
Please give me a step by step if possible
Reagrds,
Vinod

I guess it depends on how you want to present the choice of html/PDF to the user. One way would be to render the form as HTML for the task, and provide the PDF as an attachment. When they open the task, the form appears in HTML, but they could optionally open the attachment and submit the PDF. This would complete the task, but the HTML form would still be open in Workspace, which would probably confuse the user.
Another way would be to create a dynamic multi-page form - page one asks the user if they want HTML or PDF. When they submit that, the HTML or PDF form is opened. I'm not sure how to implement this. Hopefully other community members have some suggestions.

The cluster service terminated, error 7024, cannot create a file when that file already exists

I have a test 2-node Failover cluster using Server 2012 R2
As of last night the cluster service on one of the 2 nodes is down with this error:
The Cluster Service service terminated with the following service-specific error:
Cannot create a file when that file already exists.
EventID 7024
The Cluster service waits 60 sec, tries to start, and the same error occurs again.
Any idea where to look to identify which file this error is referring to, or how to go about identifying root cause and getting a solution?
thank you.
samb

Hi Yeswanth
Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
Will this be fine.
Regards
Ashmi

My Imac drive just died. Always backed up with Time machine to a WD My Passport. But after connecting it to my other imac (also running Snow Leopard) all the files are missing. I click on backup.backupdb but no files - just applications. Any ideas?

My Imac drive just died. Always backed up with Time machine to a WD My Passport. But after connecting it to my other imac (also running Snow Leopard) all the files are missing. I click on backup.backupdb but no files - just applications. Any ideas?

Welcome to the Communities.
We want to help you but unfortunately you have given us insufficient information.
Please find a moment to tell us more about your machine, the model identifier, the OS version, and the total amount of RAM you have. It also helps to know where you are, nothing specific, just the country. Macs do not run on iOS 6.1.6 as your profile says.
Then fill those same details in your profile for future use
These documents may prove helpful .. Solving Time Machine problems Pondini FAQ
http://pondini.org/TM/ Troubleshooting.html

I ran Logic Pro 9 recently, and I realised I had missing loops. When I checked the index, I realised all the loops were missing from Soundtrack Pro. Is there a dummies guide to uninstalling Logic Studio (not logic pro), or another way to retrieve my loops

Can someone help, I'd really like to get started on my software!

Hi
I have just extracted all the STP content using Pacifist (with Disk Images of all 3 'Audio Content' disks mounted:
I got 24 GB of content. You must be missing something somewhere in the install process
CCT

Started firefox today and for some reason all the bars are missing which includes the bookmark button, back button, really everything...I have tried for hours to get them back and even did a restore to my system, no help...how do I get them back

all the bars at the top of the page have gone missing including the back button, everything...how can I restore them?

'''Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)
Press ALT V T M (CTRL V T M on Macs) on your keyboard. This should restore the menu bar (Firefox 3.6) You can also restore the menu bar by pressing Alt and going to View | Toolbars | Menu bar
'''Navigation Toolbar'''
Press Alt V T N (CTRL V T N on Macs) on your keyboard.
'''Other toolbars'''
View | Toolbars | Select the desired Toolbar
'''Other steps to try'''
Try restoring the default set by going to View | Toolbars | Customize | Restore Default Set. This will put the toolbars back in the default place. This would be a good idea if you are missing specific icons on the Navigation Toolbar
'''Safe Mode'''
You May need to reset toolbars and controls via [[Safe Mode]]
Make sure you completely close Firefox first. When you get to the Safe Mode window, select Reset toolbars and controls and then Make Changes and Restart.
Links:
[[Menu bar is missing]]
[[Navigation Toolbar Items]]
[[Back and forward or other toolbar items are missing]]
Hope this helps!

How to see all the enterprise services in a Discovery system

Hi,
Please let me know how to see all the enterprise sevices in a discovery system.
Please let me know how to load the enterprise services into webdynpro from discovry system
Thanks and Regards,
Naveen N M

Hello all,
I can't figurate how to list all the root directories
(C:/> , D:/>, E:/> etc.) in a system.
I know how to recursively check the content of a
directory and all its subdirectories when a
predefined path is defined. However what I' d like to
do is actually give the option to pick one of the
root directories to start the iteration. I have been
looking around but I can' really find anything
helpful.
If any of you has any idea on how to achieve the
above objective some clarification would be really
appreciated.
Thanks in advance for your help!How to installing the Javax.comm package

All the cluster services missing

Similar Messages

Maybe you are looking for