All the cubes are not visible in cube browser of Voyager
Hi
After following the steps below:
1. Login to Central Mangagement Console.
2. Click on Voyager Connection to see the list of avaliable connection.
3. Click on New button(present below the manage menu) to create a connection.
4. Give name and chose the type of server you want to connect from the providers list.
5. Now Give the server name and click on connect button.
6. Give the username and password and click on ok
7. Select the cube you want connect from the cube browser and click on OK button.
I am not viewing all the cubes in cube browser. Do I have to make any setting/ maintain in BI to view the cubes in cube browser.
Any suggestion/solution?
Thanks
Debasish
Hello Debasish,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk
Similar Messages
-
I bought an ibook and some of the pages are not visible and show and error message that there is an encoding error. Can you help?
There are numerous thread about the same matter in this forum
I hope you'll find your answer
https://discussions.apple.com/search.jspa?resultTypes=&dateRange=all&peopleEnabl ed=true&q=the+format+is+not+valid&containerType=14&container=2084&username=&rank By=relevance&numResults=15 -
My keyboard doens't work correctly when I push numbers it appears symbols and all the letters are not good
I suspect someone or something in your house may have changed a keyboard preference. Try System Preferences - Keyboard - Keyboard tab - uncheck Use all F1......
-
BlackBerry 9220 all the keys are not working & camera working Automatically
Guys Please Help,
My BlackBerry 9220 all the keys are not working (except end button)& camera working Automatically, i tried to update from desktop manager but the update reaches to 100 % & stucks. I tried 5 time but still it is not updataing. I m fedup from this phone, please help
Regards,
TajHi Taj151286
Welcome to BlackBerry Support Forums
Please run a Self Test on your Device to see if its an hardware issue , follow this Knowledge base :
KB16037 : Using the Self Test application on the BlackBerry smartphone.
If your device fails then you might have to look for warranty or repair options.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
All the subnets are not reachable over the VPN
Hi all,
We have a EZVPN connection to one of our branch office. Connectivity diagram is attached with this discussion.
HO LAN (10.1.0.0/16 & 192.6.14.0/24) --------- ASA5520-------- Internet ---------- Cisco2911-------- LAN of remote location (10.2.0.0/16)
we are using 10.2.0.0/26 subnet at remote office and 10.1.0.0/16 & 192.6.14.0/24 subnets at HO. From HO through 10.1.0.0/16 & 192.6.14.0/24 all the devices are reachable except the firewall which is connected with GigabitEthernet0/2 interface of cisco2911 router(on which VPN is created).
Its a fortigate firewall and it is reachable locally from the network 10.2.0.0/16. I believe its an issue with phase2 ACLs but didn't able to resolve the issue.
I'm not able to take GUI / CLI interfaces of fortigate firewall even i'm not able to ping the IP of GigabitEthernet0/2 interface of cisco2911.
kindly advise on same.
Below is the configuration of ASA5520 of HO and cisco2911 router of branch office
ASA5520:-
access-list inside_access_in extended permit ip 192.6.14.0 255.255.255.0 10.2.0.0 255.255.0.0
access-list inside_access_in extended permit ip 10.1.0.0 255.255.0.0 10.2.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 192.6.14.0 255.255.255.0 10.2.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 10.1.0.0 255.255.0.0 10.2.0.0 255.255.0.0
access-list splittunnelacl_JNC_AUH extended permit ip 192.6.14.0 255.255.255.0 10.2.0.0 255.255.0.0
access-list splittunnelacl_JNC_AUH extended permit ip 10.1.0.0 255.255.0.0 10.2.0.0 255.255.0.0
access-list Outside_cryptomap_65534.191 extended permit ip object-group DM_INLINE_NETWORK_103 10.2.0.0 255.255.0.0
jashanmalasa/sec/act# sho run obj
jashanmalasa/sec/act# sho run object-group | b DM_INLINE_NETWORK_103
object-group network DM_INLINE_NETWORK_103
network-object 10.1.0.0 255.255.0.0
network-object 192.6.14.0 255.255.255.0
group-policy AUHNEW internal
group-policy AUHNEW attributes
dns-server value 192.6.14.189 192.6.14.182
vpn-access-hours none
vpn-idle-timeout none
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec
ip-comp disable
re-xauth disable
pfs enable
ipsec-udp disable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value
default-domain value xxxxxx
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout none
ip-phone-bypass disable
leap-bypass disable
nem enable
tunnel-group AUHNEW type remote-access
tunnel-group AUHNEW general-attributes
authorization-server-group LOCAL
default-group-policy AUHNEW
tunnel-group AUHNEW ipsec-attributes
pre-shared-key *****
peer-id-validate nocheck
isakmp ikev1-user-authentication none
Cisco2911:-
Current configuration : 10258 bytes
! Last configuration change at 19:06:18 AST Thu May 8 2014 by admin
! NVRAM config last updated at 19:01:43 AST Thu May 8 2014 by admin
! NVRAM config last updated at 19:01:43 AST Thu May 8 2014 by admin
version 15.1
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname AUHOffice_RTR
boot-start-marker
boot system flash:c2900-universalk9-mz.SPA.151-4.M4.bin
boot-end-marker
card type e1 0 0
no aaa new-model
clock timezone AST 4 0
network-clock-participate wic 0
network-clock-select 1 E1 0/0/0
no ipv6 cef
ip source-route
ip cef
ip name-server 213.42.xxx.xxx
multilink bundle-name authenticated
isdn switch-type primary-net5
crypto pki token default removal timeout 0
voice-card 0
dspfarm
dsp services dspfarm
voice service voip
fax protocol pass-through g711ulaw
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
codec preference 4 g729br8
voice class h323 1
h225 timeout tcp establish 3
voice translation-rule 1
rule 1 /^9\(.*\)/ /\1/
voice translation-rule 2
rule 1 /^0\(2.......\)$/ /00\1/
rule 2 /^0\(3.......\)$/ /00\1/
rule 3 /^0\(4.......\)$/ /00\1/
rule 4 /^0\(5........\)$/ /00\1/
rule 5 /^0\(6.......\)$/ /00\1/
rule 6 /^0\(7.......\)$/ /00\1/
rule 7 /^0\(9.......\)$/ /00\1/
rule 8 /^00\(.*\)/ /0\1/
rule 9 /^.......$/ /0&/
rule 10 // /000\1/
voice translation-rule 3
rule 1 /^3../ /026969&/
voice translation-profile FROM_PSTN
translate calling 2
translate called 1
voice translation-profile TO_PSTN
translate calling 3
license udi pid CISCO2911/K9 sn xxxxxxxxx
license accept end user agreement
license boot module c2900 technology-package securityk9
hw-module pvdm 0/0
hw-module sm 1
username admin privilege 15 secret 4 Ckg/sS5mzi4xFYrh1ggXo92THcL6Z0c6ng70wM9oOxg
redundancy
controller E1 0/0/0
framing NO-CRC4
pri-group timeslots 1-10,16
crypto ipsec client ezvpn jashanvpn
connect auto
group AUHNEW key jashvpn786
mode network-extension
peer 83.111.xxx.xxx
acl 150
nat allow
nat acl 110
xauth userid mode interactive
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 10.2.0.1 255.255.255.248
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1430
ip policy route-map temp
duplex auto
speed auto
crypto ipsec client ezvpn jashanvpn inside
h323-gateway voip interface
h323-gateway voip bind srcaddr 10.2.0.1
interface GigabitEthernet0/1
description *** Connected to 40MB Internet ***
no ip address
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface GigabitEthernet0/2
ip address 10.2.0.11 255.255.255.248
duplex auto
speed auto
interface Serial0/0/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface SM1/0
ip unnumbered GigabitEthernet0/0
service-module ip address 10.2.0.3 255.255.255.248
!Application: CUE Running on SM
service-module ip default-gateway 10.2.0.1
interface SM1/1
description Internal switch interface connected to Service Module
no ip address
interface Vlan1
no ip address
interface Dialer0
description *** JASHANMAL 40MB Internet ***
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname xxxxx
ppp chap password 7 0252150B0C0D5B2748
ppp pap sent-username xxxxxx password 7 15461A5C03217F222C
crypto ipsec client ezvpn jashanvpn
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source route-map nonat interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
ip route 10.2.0.0 255.255.248.0 10.2.0.2
ip route 10.2.0.3 255.255.255.255 SM1/0
ip route 10.2.6.1 255.255.255.255 10.2.0.2
ip route 10.2.7.1 255.255.255.255 10.2.0.2
ip route 172.16.5.0 255.255.255.0 10.2.0.2
access-list 100 deny ip 10.2.4.0 0.0.0.255 10.1.15.0 0.0.0.255
access-list 100 deny ip 10.2.4.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 100 deny ip 10.2.4.0 0.0.0.255 10.1.50.0 0.0.0.255
access-list 100 deny ip 10.2.4.0 0.0.0.255 10.1.2.0 0.0.0.255
access-list 100 deny ip 172.16.5.0 0.0.0.255 10.1.6.0 0.0.0.255
access-list 100 permit ip 10.2.4.0 0.0.0.255 any
access-list 100 permit ip 172.16.5.0 0.0.0.255 any
access-list 110 deny ip 10.2.0.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 10.2.2.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 10.2.3.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 10.2.1.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 10.2.5.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 10.2.5.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 10.2.3.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 10.2.2.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 10.2.1.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 10.2.0.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 10.2.4.0 0.0.0.255 10.1.9.0 0.0.0.255
access-list 110 deny ip 10.2.4.0 0.0.0.255 10.1.50.0 0.0.0.255
access-list 110 deny ip 10.2.4.0 0.0.0.255 10.1.15.0 0.0.0.255
access-list 110 deny ip 10.2.4.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 10.2.4.0 0.0.0.255 10.1.2.0 0.0.0.255
access-list 110 deny ip 10.2.6.0 0.0.0.255 10.1.15.0 0.0.0.255
access-list 110 deny ip 10.2.6.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 10.2.6.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 172.16.5.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 172.16.5.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 172.16.5.0 0.0.0.255 10.1.9.0 0.0.0.255
access-list 110 deny ip 172.16.5.0 0.0.0.255 10.1.50.0 0.0.0.255
access-list 110 deny ip 172.16.5.0 0.0.0.255 10.1.15.0 0.0.0.255
access-list 110 deny ip 172.16.5.0 0.0.0.255 10.1.2.0 0.0.0.255
access-list 110 permit ip host 10.2.6.1 any
access-list 110 permit ip host 10.2.6.2 any
access-list 110 permit ip host 10.2.6.3 any
access-list 110 permit ip host 10.2.6.4 any
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 86.96.201.72 eq 10008
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 86.96.254.136 eq 10008
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 216.52.207.67 eq www
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 199.168.151.22 eq www
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 199.168.148.22 eq www
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 199.168.149.22 eq www
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 199.168.150.22 eq www
access-list 110 permit tcp 172.16.5.0 0.0.0.255 any
access-list 150 permit ip 10.2.4.0 0.0.0.255 any
access-list 150 permit ip 10.2.0.0 0.0.0.255 any
access-list 150 permit ip 10.2.1.0 0.0.0.255 any
access-list 150 permit ip 10.2.2.0 0.0.0.255 any
access-list 150 permit ip 10.2.3.0 0.0.0.255 any
access-list 150 permit ip 10.2.5.0 0.0.0.255 any
access-list 150 permit ip 10.2.6.0 0.0.0.255 any
access-list 150 permit ip 172.16.5.0 0.0.0.255 any
access-list 150 permit ip 10.2.7.0 0.0.0.255 any
route-map temp permit 100
match ip address 100
set ip next-hop 10.2.0.9
route-map temp permit 110
route-map nonat permit 10
match ip address 110
snmp-server community xxxxxxxx
snmp-server location JNC AbuDhabi Office
snmp-server contact xxxxxxxx
snmp-server enable traps tty
snmp-server enable traps cpu threshold
snmp-server enable traps syslog
snmp-server host xxxxx version 2c jash
control-plane
voice-port 0/0/0:15
translation-profile incoming FROM_PSTN
bearer-cap Speech
voice-port 0/1/0
voice-port 0/1/1
voice-port 0/1/2
voice-port 0/1/3
mgcp profile default
dial-peer cor custom
name CCM
name 0
name 00
dial-peer cor list CCM
member CCM
member 0
member 00
dial-peer cor list 0
member 0
dial-peer cor list 00
member 0
member 00
dial-peer voice 100 voip
corlist incoming CCM
preference 1
destination-pattern [1-8]..
session target ipv4:10.1.2.12
incoming called-number [1-8]..
voice-class codec 1
voice-class h323 1
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 101 voip
corlist incoming CCM
huntstop
preference 2
destination-pattern [1-8]..
session target ipv4:10.1.2.11
incoming called-number [1-8]..
voice-class codec 1
voice-class h323 1
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 201 pots
corlist outgoing 0
translation-profile outgoing TO_PSTN
destination-pattern 0[1-9]T
incoming called-number .
direct-inward-dial
port 0/0/0:15
dial-peer voice 202 pots
corlist outgoing 0
translation-profile outgoing TO_PSTN
destination-pattern 00[1-9]T
incoming called-number .
direct-inward-dial
port 0/0/0:15
prefix 0
dial-peer voice 203 pots
corlist outgoing 00
translation-profile outgoing TO_PSTN
destination-pattern 000T
incoming called-number .
direct-inward-dial
port 0/0/0:15
prefix 00
gateway
timer receive-rtp 1200
gatekeeper
shutdown
call-manager-fallback
secondary-dialtone 0
max-conferences 8 gain -6
transfer-system full-consult
timeouts interdigit 4
ip source-address 10.2.0.1 port 2000
max-ephones 58
max-dn 100
system message primary Your Current Options SRST Mode
transfer-pattern .T
alias 1 300 to 279
call-forward pattern .T
time-zone 35
date-format dd-mm-yy
cor incoming 0 1 100 - 899
line con 0
password 7 030359065206234104
login local
line aux 0
password 7 030359065206234104
login local
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password 7 110E1B08431B09014E
login local
transport input all
line vty 5 15
password 7 030359065206234104
login local
transport input all
scheduler allocate 20000 1000
ntp master 1
endAttached is the result from packet tracer of ASA5520-ASDM
-
After updating to 10.2 on Z10 many contacts do not appear on the Contacts list, but if I search for them, I get them one at a time. I can't browse for them, but they are still in a file somewhere. That file is no longer fully connected to the Contacts app, it seems. I'm going to call the two alternatives the "browsible" list when I refer to the Contact app working correctly and lsiting the contact alphabetically; and the "non-browsible" list, when I can only find them by a search.
One other thing of interest. When I add a contact that is in the same name as one on the non-browsible, I will get a message asking me if I want to replace the [old] contact. If I say yes, the new contact listing joins the hidden list and replaces what was there. If I say no, I get the contact added to the browsible Contact app. Thereafter, if I search on that name I get two hits: one is the old, non-browsible entry and the other is the new one that is browsible.
I did the 10.2 update when I was running the older BB link on a WinXP computer and it did not work to create a back-up, so I can't try restore. I now run Win7 64-bit and the new link seems to work okay, but that was installed after I upgraded to 10.2..
Any suggestions as to where I go to find the hidden contact entries on the non-browsible list? And how I get them to appear on the alphabetical, browsible, list when Contacts is opened?
Thanks for all answers.
KenThat's another odd thing. I did make a big effort to back-up the Z10 before the update to OS 10.2.1. But, it appears to me that by downloading the new OS to my computer [T-Mobile never does push the BB updates, not as long as I've owned it, which was a few days before the US distro, when I got hold of one for the South American market in Miami Breach] it seems to have removed my installed BB Link from my laptop. And my back-up files are empty.
Last time something like this happened. there was a workaround. Do this, do that, and suddently the contacts that are lurking somewhere on the phone, appear. I was hoping for this again.
If this is a known issue, why is it not featured on the BB page where the installer was located? I would never have downloaded OS 10.2.1, if I was warned I might lose my contacts and texts.
A sorry mess.
Ken
PS Note I corrected "visible" to "invisible" in the title of this thread -
All the properties are not displying for the View Object
i my one of the view Object it is only showing the properties
Values
Lable
Render values
I want to use text box (Input box )...but it is not showing in the property window
why it is not showing the all the properties for the that view Object.
Is it a read only view object ? if so then how to change itThis question is confusing.
You talk about properties, suggesting attribute properties are not showing up in the view object editor. Then you talk about a read-only view object, which suggests you talk about a running application?
Normally a view object is updatable when it is based on an entity object and when on the entity object tab of the view object editor (the page in which you select the entity object) the updatable checkbox has been checked.
But being updatable as such is not why attributes would not show up in a screen.
Can you be more specific, and also tell us what JDeveloper version you are working with?
Jan Kettenis -
TS1718 Purchased Eagles Desparado Album All the songs are not fully downloaded
I just purchased Eagles "Desparado " album and though my library says they are fully downloaded ,they are not.Tred to download one song and stillget the same result ,patial download Updated i pod and i Tunes to no avail Please help
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
I have a split screen with two site. All the suggestions are not working.
Everytime I load Firefox, I get a split screen with two sites on it.
I have tried the resetting of home page and clicking off the icon to not show the site selection page.
I have facebook on the left and it cannot be expanded bigger than a panel. I have a 3/4 screen of what ever web site I wanted to load.
How do I turn this off?
Nothing is working and I cannot imagine how it happened.Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.<br />
You can check the Properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Cmd+B on Mac).<br />
In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.<br />
Make sure that "Load this bookmark in the sidebar" is not selected.<br /> -
GR/IR clearing all the documents are not clearing
Dear Experts,
In ob74 i have the following setings for my GR IR clearing a/c
EBELN
EBELP
GSBER
VBUND
ZUONR
My client is using F.13 clearing function. But in that some entries are not clearing.
Example of that
Assignment Docment no. TYPE Pk Doc date Psng Date Amount in DC Cur Amt in Loc Cur Lcu Reference
450002593900002 5000004774 WE 50 26.5.2009 8.6.2009 2785.59- SAR 2785.59- sar
450002593900002 5100006581 RE 40 07.11.2009 6.12.2009 2785.89- SAR 2785.59- sar
Here assignemnt field is same and amount in DC is also same but can you please let me know the why it is not cleared.
Thanks
BhaskarHi Thank for the reply.
In my goods receipt document
entry is creating like
81 Material
96 GR/IR
50 GR/IR
and invoice
31 vendor
40 GR/IR clearing
Can you please let me know how to crate these type of entries
why it is getting created only these entries are not getting cleared thru F.13
Waiting for your reply.
Thanks
Bhaskar -
While working on my website CMS, pieces of the page are not visible
After I updated to Firefox 4.0, parts of the pages are missing when I'm working in my web CMS. It has not affected usability, but it's strange not seeing the right hand side of the CMS pages and having some of the formatting icons in the wrong places.
First, try resetting your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release. -
Can Not send pictures and documents with my webmail, the link is Not visible on Safari Browser
Hello, i can Not send pictures and documents wit my tele2 webmail, the link to so this is Not visible. I tried Safari, Opera, and Dolphin.
Safari doesn't support the attaching/uploading of files. If you want to send documents or photos that you have stored on the iPad then you can use the Mail app - if you've set up your email account on it, then you should be able to start in the app that contains the document, and then use that app's functionality to select the document and attach it to an email e.g. in the Photos app you can use the icon of the box with the arrow coming out of it to select and email a picture
-
URL'S of all the pages are not shown by aurora 12.0a2. on opning and browsing the net
URL'S of my firefox has been gone. i cant see the url's of the pages. please suggest how can i make the url's appear again.
If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/ -
So in this updated version of Pages under share all the options are not there
In the previous version of Pages, you could always click on share and then click on email and they would give you option of PDF, word, pages, etc. Now there is not an email option. I have to save it as a word document and then find it under finder and then attach it to an email, Many more steps. This has got to be a mistake
There are too many versions of Pages, and OS X in play now to speak in generalities such as in the previous version of pages.
On OS X Yosemite, with Pages v5.5 (requirement), the appropripate Sharing menu structure to send a document via Mail remains (as it was in Pages v5.2.2 on Mavericks). Once you click on Mail, a new sheet slides down, offering PDF, Word, etc. -
My iphone screen is black and all the buttons are not working
The screen of my iPhone 4 suddenly went irresponsive and within a few seconds it went completely black. I tried to power it off and also tried the home button but nothing seems to be responding.
Incoming calls still ring out but I am not able to answer the calls and cannot see anything on the screen.
I connected it to my laptop, the iphone appears on "my computer" and I was able to see pictures and videos that are on the phone, however iTunes cannot detect the devise.
Any help please?
ThanksThe phone is now working
I followed the steps in the below link
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks -
The index tabs were on some kind of toolbar just below the bookmark toolbar and you could see what was open in multiple tabs. I'm not referring to rolling over the Firefox icon for the Windows 7 thing, that's a pain. These index tabs were in plain sight. No matter what I try in Firefox 8, they won't appear.
the tabs were move to above the navigation bar, where the menu bar was. They hardly look like tabs there, but you may have turned off the tabs bars. View (Alt>V) > Toolbars > Tabs Bar
I think the solutions would really prefer though would be
You can make '''Firefox 8.0''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
<p>There is a lot more beyond those first 10 steps listed, if you want to make Firefox more functional.</p>
<p><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small></p>
Maybe you are looking for
-
DTD is valid. DTD and XML are in the same directory. I can read from XML, when is validation off. When is validation on, it is throwing exception... Project path: d:/dbt Path to xml is: /files/xml In XML file : <!DOCTYPE ABCD SYSTEM "dictionary.dtd">
-
Unable to create New Business System
Hi I Installed XI 3.0 and configuring as per the configuration guide. When I try to create Business System (SLD) I get the following error message. "Integration Server already defined There is already an integration server defined for the selected te
-
How to run unix command from Oracle Foms 10g
OS: UNIX Solaries, Oracle Application Server 10g To run shell script from Oracle Forms, I used the following host('/bin/bash /u01/compile.sh') and it works well Now, I need to run unix command something like host('mv form1.fmx FORM1.FMX') but it's no
-
Monitoring thread usage for ExecutorService objects
Is there a way to find out how many active threads there are running in an ExecutorService? I am using a fixed thread pool (Executors.getFixedThreadPool()) and I want to monitor thread count in order to see if the pool size I chose is too small.
-
when I try to open an adjustment layer the working panel on the right of the screen comes up with a strip showing a thumbnail of my photo, but there is no link and no white rectangle. What is wrong? Peasashjoan