All the drivers installed, after restart system says no audio output device fo

I am just saying after installing all the drivers software and restarting, windows says that it is not connected i have checked the motherboard and the card and there is no problem, does anyone have a patcher that can resolve this issue?thanks,

Couple of questions:?
If you go "My Computer" -> "Properties" -> "Device Manager" do you see any "unknown devices" or even better yet under "Sound, Video & Game Controllers" the CL card?<
Are you using 4GB of RAM...if so remove 2GB and re-install the 2GB after all the updates/drivers have been installed.<
Vista 64 or Vista32?<
What motherboard/CPU/PS/Vid card?<
?Otherwise I would try the following if you can:?
Move the CL card to another slot. (I have mine in the most distant slot on the motherboard from the CPU).<
Verify your power supply meets minimum requirements.<
Test the CL card in another system (non Vista).<
Verify the CL card is seated correctly in the PCI slot.<
Verify you have the latest BIOS...and if you flash a new BIOS - reset to defaults first in the BIOS before making config changes.<
Install the new Microsoft compatibility updates: http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=2280<
?-Good luck,Meerkat54Message Edited by meerkat54 on 08-0-200708:45 AM
Message Edited by meerkat54 on 08-0-200708:46 AM

Similar Messages

How do I get my sound to work in Vista using bootcamp? It says no audio output device is installed.

I installed bootcamp on my macmini and am using Vista, but it my sound won't work. It says no audio device is installed.

Realtek Drivers
Cirrus realitypod mac audio driver

Pavilion dv6661se. i have lost all audio. i get prompts that say 'no audio output device'

How can I download the driver for the sound card that I have. I also do not know how to look-up what sound card I do have.

In System Preferences>Sound do you have your internal speakers set as the output source?
You may have toggled on optical output with the Toslink cable - check to see if there's a red light coming from the port. If so, quickly plug and unplug a set of headphones for a number of times to see if you can toggle the switch back from optical to the internal speakers.
Good luck,
Clinton

HELP ASAP! no audio output device installed with hp pavilion dv2500

product name: hp pavilion dv2000
model number: dv2710us
product number:2CE75228LJ
windows vista home premium 32bit
my hp keeps telling that have no audio output device installed and theres the the image for volume with a large red circle with a white x in it.
this is not true because i have contexant (i think that's what it is called) speakers installed.
Lately when i would restart my computer the sound would work intermittently but for the past two days whether i restart my computer or not the image for volume with a large red circle with a white x in it is still there and says no audio output device installed. PLEASE HELP!
This question was solved.
View Solution.

Hi, you can try the below steps to resolve the issue :
Step 1 : Re-install audio drivers from HP Recovery Manager.
1. Click Start, in the Start search box, type recovery . Then click Recovery Manager .
2. In the Recovery Manager window that displays, click Next. On the Reinstall software programs that came with your computer screen, click No, I would like to see other options . Then click Next .
3. In the Reinstall hardware drivers screen, click Yes . Then click Next. On the Welcome to Hardware Driver Reinstaller screen, click Next .
4. In the driver list, select the name of the sound adapter installed on the system. Then click Next. When complete, the Reinstallation is complete screen displays. Click Finish to restart the computer. After the computer starts, test for sound. If the issue persists perform step 2.
Step 2 : Re-install audio drivers manually
If there is no sound and the error still displays, update the audio driver from the weblink below :
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-63129-1&cc=us&dlc=en&lc=en&...
Step 3 : Restart the Windows Audio Service.
1. Click Start , type services.msc into the search field, and then select services.msc from the list when it becomes available to open the Programs window.
2. Scroll down to and select Windows Audio , right-click to open the drop-down menu, and then click Start .
3. Right-click Windows Audio , click Properties , and then verify that Startup Type is set to Automatic .
Restart the Notebook and check for the issue.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

No audio output device is installed - Satellite C855D-S5950 - Windows 8 64-bit

Toshiba laptop
Model: Satellite C855D-S5950
P/N: PSCBQU-03G03E
OS: Windows 8 64bit
RAM: 4GB.
Hello,
I have my friend’s Toshiba Satellite C855D-S5950 with Windows 8 (64bit) that about a year old. Some months ago the sound stopped working. He asked me to take a look at it. I have researched this issue and found others have encountered his problem as well.
Currently, the sound icon has a red x, “No audio output device is installed.”
Things I have tried so far to try to fix this:
I went to the Device Manager > Sound, video and game controllers. I have "Realtek High Definition Audio" listed with the little yellow caution icons on them. I have tried to disable, then enable it. I have tried to uninstall the sound driver from the Device Manager. I would restart the laptop, and let the driver reinstall itself, to no effect. I have tried downloading the latest drivers from the Toshiba website. I have tried un-installing the driver while in safe mode from the Device Manager. As well as from Programs and Features. There were no positive change to the audio though, still the same message. The Realtek driver won't finish installing and throws the error: "Install Realtek HD Audio Driver Failure!! [Error Code: 0x000000FF]"
I have gone to Control Panel > Sound, under both the Playback and Recording tabs, it says "No audio devices are installed."
My friend was previously unaware of how to restart or shut down his Windows 8 laptop (as was I until I started investigating this problem for him). I mention this because there are no useful System Restore points to go back to for him.
I have also tried Using the Toshiba Application Installer as well to re-install the driver after un-installing the Realtek Audio driver from Add/Remove Programs. I went to Desktop Assist >Support Recovery > Toshiba Application Installer.
Realtek Audio Driver 6.0.1.6743
It loads most of the way then I get:
"Install Realtek HD Audio Driver Failure!! [Error Code: 0x000000FF]"
I have also tried the following links for additional troubleshooting:
http://forums.toshiba.com/t5/Audio-Sound-Knowledge-Base/Windows-8-Troubleshoot-no-sound-with-Windows...
http://forums.toshiba.com/t5/Audio-Sound-Knowledge-Base/No-sound-from-speakers-or-headphones/ta-p/27...
http://windows.microsoft.com/en-us/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab...
http://forums.toshiba.com/t5/Audio-Sound/No-Sound-quot-No-Audio-Output-Device-is-installed-quot-Tosh...
It was also suggested in the above thread I remove the Microsoft UAA Driver, but could not find this driver on my friend’s system.
Plugging in headphones, toggling the speaker volume controls on the keyboard has had no effect.
My friend has also misplaced his install discs, so I am looking for any solution which does not require the install discs.
Any help would greatly be appreciated.
Toshiba laptop
Model: Satellite C855D-S5950
P/N: PSCBQU-03G03E
OS: Windows 8 64bit
RAM: 4GB.
Thanks in advance.
-Tre

Recovery media is created from the hard drive. You can make it using Toshiba Recovery Media Creator. You can also perform a full system reset to factory defaults using the information on the hard drive without using external recovery media. That sounds like the best course of action now. To do so, use Windows+C > Settings > Power > SHIFT + Restart > Troubleshoot > Reset your PC.
- Peter

Help! No Audio Output device is installed

My speaker in bottom right for My sound say "No Audio Output Device Is Installed" and i have tried to go through many things to solve such as go into device manager and enable or update through there etc...to no avail.
I stumbled across a thing that worked for most people. Recovery Manager. but. I don't have it on my computer to try so i have no other options to turn to. Can someone please help on how to fix this issue

Dear Customer,
Welcome to the HP Consumer Support Forum!!
To isolate the issue please perform the steps below:
1. Restart the computer.
2. Check the Sound icon in the taskbar.
3. If the icon has an X in the lower corner, click the Sound icon in the taskbar or
4. Right-click the icon, and then click Troubleshoot sound problems.
5. The audio troubleshooter checks for sound problems. When the troubleshooter finishes, it displays the results.
6. If the computer has sound, the issue is resolved.
Install Original Realtek High Definition Audio Driver from the link below:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-Slimline-s5000-Desktop-PC-series/3942804...
From the above link click on Driver-Original > Original Realtek High Definition Audio Driver > Download and install the same.
In case the issue still persists and if the audio was working fine earlier, you may perform system restore to previous working condition using the steps mentioned in the link below:
http://bertk.mvps.org/html/restoresysv.html
Hope this helps, for any further queries reply to the post and feel free to join us again.
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
GR1
Although I am an HP employee, I am speaking for myself and not for HP

No Audio Output Device is installed

Hi,
I have a brand new Pavilion Sleekbook 14-b029TU running 64bit windows 8. product no: c7e65pa#abg.
to the right near the speaker is a red cross. when i hover the mouse over it it says no audio output device is installed. i followed all the ideas on the internet, all the trouble shooting on these forums and on hp help to no avail.
also, when i requested online support, my model does not come up in the options so i couldn't get help that way.
So if i right click on the speaker and bring up the sound options and look into them, they say that there is no audio output.
i went into device manager as suggested by hp, went to hardware, sounds, and checked and under sounds there is:
intel (r) display auto
high definition auto drive
they both say they are enabled.
what's the problem?
please i've tried so many options. i updated. turned off and turned on my computer etc etc to no avail.
i'm losing my mind. this is a new laptop. i don't understand why the hell this is not working???
PLEASE PLEASE HELP

What you are describing seems as if the sound device mute might be enabled.
Hold the Fn key down and tap the F11 key once. That should enable sound and remove the red cross in the systray over the audio icon.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
Regards.

I just buy a imac 27inch when after intalling everthing for windows 7 and all the drivers i need and goes to the restard part my imac just goes to a black screen with a blinking cursel and it just wont proceed anyone can help me with this?

i just buy a imac 27inch when after intalling everthing for windows 7 and all the drivers i need and goes to the restard part my imac just goes to a black screen with a blinking cursel and it just wont proceed anyone can help me with this?

Support articles for things like this would be here:
http://www.apple.com/support/bootcamp

After installing Mountain Lion. Under sound, where it says select an output device, it say no output devices found and there is no sound. How do I fix this? I have reinstalled the os twice and still the same. I have also repaired permissions.

After installing Mountain Lion. No sound. Under sound, where it says select an output device, it says no output devices found, and there is no sound. How do I fix this? I have reinstalled the os twice and still the same. I have also repaired permissions.

Try resetting the PRAM and SMC...
PRAM Reset:
http://support.apple.com/kb/HT1379
SMC Reset:
http://support.apple.com/kb/HT3964
Hope this helps!

Sent messages only appear in the sent folder after restarting Thunderbird

Hi, my problem is that sent messages do not appear in the sent folder unless I restart Thunderbird. I have the sent 'copies' box de-checked as if not although it syncs I end up with two copies (of sent messages).
I am using Thunderbird 31.2.0 on OSX Yosemite connecting via IMAP to ZOHO mail with STARTTLS on 587 for SMTP.
Hope you can advise, I've tried SSL/TLS on 465 also and it is the same. It's a bit of an inconvenience not being able to view the sent messages.
Many thanks

Interesting to know (the RFC violation) but as you say, perhaps not relevant as such, although if ZOHO wasn't auto-placing a copy in sent then I could check the 'place a copy in' option and it would work ok.
Anyhow, I tried your recommendations and yes, I use both an Android and an iPad to also check my mail but with both disconnected from Wi-Fi the problem still persists. There are a few warnings being reported in the TB error console on the Mac but they just relate to 'mso-table-lspace' for my INBOX.
And for info in Thunderbird on my Ubuntu laptop the problem is exactly the same -
'Place a copy' checked - Messages instantly appear in the sent folder but there are two copies.
'Place a copy' de-checked/Cached connections = 5 - Messages only appear in the sent folder after restarting Thunderbird
'Place a copy' de-checked/Cached connections = 1 - Messages appear in the sent folder on clicking out of the folder and back in.
On Ubuntu there is nothing at all in the error console.
I can work with how things are at this stage as I don't live in the sent folder (rather the inbox), and when you click into it (with the connections cache at 1) the messages do appear, so I suppose that's actually ok.

I've lost the cd-rom with all the drivers!

I've lost the cd-rom with all the drivers, and I've formated my harddrive! How do I get a new one? Can I download a .bin somewhere? I can't do anything now! I'm on my 2:nd computer writing this.
It's the mobo drivers I need(MSI K8N Neo2 nForce3 Platinum).

Quote from: pipe_ on 03-August-05, 23:44:37
I've lost the cd-rom with all the drivers, and I've formated my harddrive! How do I get a new one? Can I download a .bin somewhere? I can't do anything now! I'm on my 2:nd computer writing this.
It's the mobo drivers I need(MSI K8N Neo2 nForce3 Platinum).
DOWNLOAD DIRECT FROM MSI HERE
Best to make sure it the right model you can try HERE
Down load, copy to disk, install from disk when ready. e g after windows install (you will still need the windows disk and your CD key)

I need all the drivers for Hp15 r007tx windows 7 32 bit

Dear Team,
I have purchased hp 15 r007tx and need all the drivers for it. I have installed windows 7 32 bit on it.Plz give me the link.
This question was solved.
View Solution.

The above images are the sample of error message that i get once i update windows 7 or i reboot after installing a driver. The images are only sample not the actual error messages.

So here's my problem. I just used the "reset all settings" option, and accidentaly restored an old backup. It deleted all my photos and contacts, but for some reason I still have all the apps from after the backup date, is there a way to get it all back?

So here's my problem. I just used the "reset all settings" option, and accidentaly restored an old backup. It deleted all my photos and contacts, but for some reason I still have all the apps from after the backup date,and it also kept the notes from after the backup. The "reset all settings" option clearly says no loss of data or media, so I don't understand why some stuff got deleted. My question is, is there a way to get it back?

If you still can find a recent backup listed in iTunes/Edit/Preferences/Devices, use this one to restore from.
If there are no recent backups listed, your data is gone. Only if you included the iTunes backup folder into your computer backup routine, you could be able to restore this folder and find one of your latest backups listed again.
iTunes: About iOS backups

Hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

Marco,
Here are some suggestions:
1) Check the manual the Keithley manual to see how to configure the RS-232.
    On some models you need set Factory defaults to USER and turn on the RS-232.
    Also there may be a setting for SCPI which you want on (probably on by default).
2) On your PC - open Device Manager. See if a COM port exists and is functional.
     You must get this working before continuing.
      You can set the COM port parameters by right clicking and selecting Properties.
     (On some PCs the onboard ports can be disabled in the BIOS)
3) If step two was OK, open MAX (Measurement and Automation eXplorer).
    On the left side, click on Devices and Hardware.
    Click on Serial and Parallel.
    Go to the COM port you found in Device Manager.
    Open a VISA Test Panel.
    Now I don't have one I can look at right now, so this is general idea:
   Configure the COM port to match the Keithley settings (should be OK if step 2 worked)
   Go to the (I think) Input Output tab (you want to send a command)
   The command string input should already have a *IDN? entered, if not, type it in.
   Click on the Query button to send the command and check the response.
   If you get an ID string back (Company name, Model, FW Version ...) then it works.
   (Disregard an error saying it did not get enough charcters back.)
I hope this helps,
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.

All the drivers installed, after restart system says no audio output device fo

Similar Messages

Maybe you are looking for