All the Function's menu is grayed (dimmed) out?

I cannot use the Formula Editor because the whole menu is disabled. How can I enable the function' s menu so I can use the Formula Editor and Data Editor?
Thanks

Have you actually created a table and clicked in a cell?
Peter

Similar Messages

Can't synch my new iPod nano to itunes - the drop down menu is grayed out - what can I do?

Can't synch my new ipod nano with itunes - the drop down menu is grayed... what am I doing wrong?

Hello Bridgie\'s girl
Try out the 5r’s section to resolve issues with your iPod nano not syncing. A simple restart my fix it or you may need to restore it all together.
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Regards,
-Norm G.

Installing IOS 8 on my iPad slowed all the functions significantly, anyone else have this problem?

Installing IOS 8 on my iPad slowed all the functions significantly, anyone else have this problem?

There are many people experiencing the same with the iPad 2 and the iPhone 4S. The hardware in these devices is barely adequate to run iOS8. You can look for obvious menu settings (like turning off or minimizing background app refresh) but there is no getting around the fact that these two devices are barely up to running iOS8.

How can i understand all the functions provided in the measurement studio for visual c++?

Hoew do i choose the AppWizard wich ensure i have the correct header files, libraries...? What is th eMFC ClassWizard use for? How can i more understand all the functions provided in this software?

Hi,
It all depends on what you want to do! but in general to use MStudio the best way is to select a NI Measurement Studio AppWizard this way you will have all the classes for the MStudio components to gether with a dilog based MFC application.
The ClassWizard will help you create classes for the components of your user interface, you can use it with the MStudio components just the same way that you use it with any control in VC++.
If you go to the start menu and programs you should see under National Instruments a link for MStudio where you can access the help file with all the information on the components and classes. However for specific tasks or questions the best way is to use http://www.ni.com/support.
Good luck!
Regards,
Juan Carlos
N.I.

I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad. How can I found out if I will be able to access all the functionality in Alice? Will I need to purchase a local plan of some sort?

I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad to use while traveling back and forth from the U.S. to Australia, and within Australia. How can I found out if I will be able to access all the functionality of the iPad in Alice? Will I need to purchase a local plan of some sort? I have never owned an Apple product before -- I'm a newby!

Aside form the limitation of LTE to the 700MHz and 2.1GHz bands (which rules out LTE in Europe I gather, at least as it stands now) the new iPad should let you use a GSM 3g/2g/edge network anywhere. The CDMA Verizon model will only be able to use it's native CDMA radio band in the USA (that radio will be locked to Verizon), but it's international GSM radio is the same as the AT&T model.
Keep in mind though that by far the cheapest option when abroad is to take advantage of free wifi as much as possible (well, that is always the cheapest option, since it is free). I know several people who have taken their wifi-only iPads and iPad2s to Europe and said they did not find the lack of 3G really inconvenient at all as most towns had plenty of free or cheap wifi access all over the place.
And in 3 years, your iPad will be at least 2-3 generations behind, LTE will have already been replaced by 5G or whatever the next new generation of cellular ends up being named (and the "young" kids will be wondering what the heck 3G even means or meant - dang that stuff was from the olden days!), and you can pitch that ancient piece of technology and start things all over again

Iv bought a touchpad app for my iPhone 5 to use on my Mac mini, all the functions work accept the zoom one, how can I fix this problem

Iv bought a touchpad app for my iPhone 5 to use on my Mac mini, all the functions work apart from the zoom one. How can I fix this please

Iv bought a touchpad app for my iPhone 5 to use on my Mac mini,''
Considering the app for the iPhone is for iOS, you may have problems using it on the Mac (Mac OS X)
Two different operating sysems.
From iTunes for the touchpad app:
Requirements: Compatible with iPhone, iPod touch, and iPad. Requires iOS 5.1 or later. This app is optimized for iPhone 5.
From here > https://itunes.apple.com/us/app/touchpad/id297623931?mt=8

Function module to get the name of all the function module used

I want to populate a internal table with the name of all function module used in the submitted program?? Is there any function module which return the name of all the function module used?

Hi Priya
Try this one RPY_FUNCTIONMODULE_READ.
Ranga

Why can't I use the function of menu item 'issue delivery output'?

why can't I use the function of menu item 'issue delivery output' in main screen of delivery note?
And at the same time I can't use the button of printing in main screen of delivery note.
the main screen of delivery note I mean above is in screen of maintaining shipping data instand of the first screen of VL02N.
TKS in advance.

Hi,
Because delivery will be having header level output and item level output. So if u try to print through main screen then system will not know whether it is header related or item related. That is the reason it is only print output at header level or item level but not in main screen.
I think u may have doubt like how billin will be issued output through Main screen. Because for billing both header and item level data are same..
Regards
Sankar

I'm using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can't select Color, Advanced BW or Grayscale unless I select "Printer Manages Color". The pull down menu is grayed out. Even with "pr

I’m using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can’t select Color, Advanced BW or Grayscale unless I select “Printer Manages Color”. The pull down menu is grayed out. Even with “printer manages color” the tif or jpg image comes out in color overlaid with black. (See example - printer1. image on left is close to what it should be). Photoshop has no updates pending. I’ve downloaded the latest Epson driver which was working fine just before the problem occurred

Is your Photoshop CS5 updated to 12.1?
Are you on Yosemite 10.10.1 or Yosemite 10.10.2?
Did you apply the recent Epson software 2.1.9 update?
What type of file is it (file format)? What bit depth and what color space?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Why can't use all the function when deployed Duke Bank successfully

i am use the DukesBankApp.ear in j2eetutorial14 to deployed .When i change the "public Object ejbCreate() throws CreateException" to "public String ejbCreate() throws CreateException",deployed Duke Bank successfully
But,I open the client,i can not use all the function. for example,when i creat new customer or account .Applecation message watch will say "remote exception"
why?or send the true DukesBankApp.ear to me .My mailbox is "[email protected]"
thinks!!!!! i want to receive your help imminence!think you very much!

the sever log say:
[#|2005-05-10T22:39:18.609+0800|信息|sun-appserver-pe8.0|javax.enterprise.system.container.ejb|_ThreadID=13;|
javax.ejb.EJBException: createCustomer: Could not create Entity EJB; nested exception is: com.sun.jdo.api.persistence.support.JDOFatalUserException: JDO76604: JNDI lookup for cmp-resource 'jdbc/BankDB' failed.
NestedException: javax.naming.NameNotFoundException: BankDB not found
     at com.sun.ebank.ejb.customer.CustomerControllerBean.createCustomer(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sun.enterprise.security.SecurityUtil$2.run(SecurityUtil.java:146)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.enterprise.security.application.EJBSecurityManager.doAsPrivileged(EJBSecurityManager.java:930)
     at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:151)
     at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:128)
     at $Proxy27.createCustomer(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:117)
     at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:651)
     at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:190)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1653)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1513)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:895)
     at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:172)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:668)
     at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:375)
     at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.read(SocketOrChannelConnectionImpl.java:284)
     at com.sun.corba.ee.impl.transport.ReaderThreadImpl.doWork(ReaderThreadImpl.java:73)
     at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:382)
|#]

I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it

I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it, and I can't for the life of me figure out how to fix this. Can anyone help? of course this happened after my warranty expired.

**update**
I don't know if this will help someone but I am posting this for that purpose. In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!). Well I didn't want to do that but it always stuck in the back of my mind. I had given up, really, and was planning to take my MBP to the apple store. But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working.
So, maybe try keeping the MBP in a cool place when it's off. Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
Hopefully this might help someone.

I am a 66 year old novice. How can I find and print all the functions of the cmd key, please.

How can I find and print out all the functions of a command cmd key please?

You can also go to MAC HELP and enter 'Key Board Shortcuts' in the entry field.
Ciao.

Disabling All The Function Keys Except The Del_Rec

Greetings,
First, I Want To Ask How Can I Disable All The Function Keys In The Forms6i Except The Del_Rec Function Key .
Second, I Want To Ask How Can I Make My Application To Fill The Screen When Executed By The User ( Maximizing My Form ) .
Thnx .

The KEY-OTHERS trigger might help you to solve the first problem.

What is the transaction to trace all the function module and its returned m

HI ,
What is the transaction to trace ALL the function module and its returned messages in a program/transaction execution?
Thank you.

You can use this function module for that purpose.
RS_CROSSREFERENCE

I turned off my ipod and when i turned it on the next day all the app icons were clear/gray

i turned off my ipod and when i turned it on the next day all the app icons were clear/gray what should i do?

Perform a hard reset. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherise if that doesn't work, try restoring your iPod Touch from a backup via iTunes. See this article for help on restoring your iPod from a backup.
http://support.apple.com/kb/ht1414
B-rock

All the Function's menu is grayed (dimmed) out?

Similar Messages

Maybe you are looking for