All the Pages are Printed - Document Printing Sales Orders
When using the Document Printing option for Sales Orders, if I select multiple documents and select print I get a message after each document that says "All the Pages are Printed", then the next document comes for printing. I also get a prompt each time whether or not to print Sales Order only or Sales Order and Pick List.
I don't have the same issue if printing Invoices from Document Printing. It asks what to print and prints all records without additional prompts between each record. I don't see anything in Print Preferences that would cause the Order to act differently from the Invoice.
We are using B1 9.0 PL 06.
Alan
Hello there, linafrompereira.
The following portion of the online Pages Help for Mac provides information on grouping items in Pages:
Layer, group, and lock objects - Pages Help for Mac
http://help.apple.com/pages/mac/5.2/#/tan5eab46568
Group and ungroup objects
Shift-click to select multiple objects.
In the Arrange pane of the Format inspector, click Group (or choose Arrange > Group from the Arrange menu at the top of your computer screen).
To ungroup an object, select it, then click Ungroup or choose Arrange > Ungroup.
Tip: You can Control-click objects, then choose Group or Ungroup from the shortcut menu. You can also add these buttons to the toolbar: Group and Ungroup.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Similar Messages
-
On Pages: I need to move the first page of my document to the end, and it shows me all the pages are in a group. How do I ungroup the pages in my doc.
Hello there, linafrompereira.
The following portion of the online Pages Help for Mac provides information on grouping items in Pages:
Layer, group, and lock objects - Pages Help for Mac
http://help.apple.com/pages/mac/5.2/#/tan5eab46568
Group and ungroup objects
Shift-click to select multiple objects.
In the Arrange pane of the Format inspector, click Group (or choose Arrange > Group from the Arrange menu at the top of your computer screen).
To ungroup an object, select it, then click Ungroup or choose Arrange > Ungroup.
Tip: You can Control-click objects, then choose Group or Ungroup from the shortcut menu. You can also add these buttons to the toolbar: Group and Ungroup.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
ICan you create and link Templates in DWCS4 after all the pages are built as HTML?
I used Dreamweaver CS4 to create a website(about 50 pages). Only after completing it did it occur to me that I should have made the pages using Templates . There are certain areas (footer, navbar, header) that will need to be globally updated occationally, but since none of the pages were built off a .DWT am I out of luck? Is there any way to create templatized pages from my existing HTML and have them LINK so they will globally update? The thought of going through and doing each of these over individually is daunting!
I used Dreamweaver CS4 to create a website(about 50 pages). Only after completing it did it occur to me that I should have made the pages using Templates .
That's called putting the cart way ahead of the horse. You would need to build a Template first, then spawn child pages from that Template. Since you're already up to your neck in this project, consider using server-side includes instead of Templates.
SSI's
http://www.smartwebby.com/web_site_design/server_side_includes.asp
More on SSI
http://forums.adobe.com/message/2112460#2112460
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
I am just about to order quite an expensive 92 page large size book in Aperture & have used the Preview button and on viewing the book in the PDF using the 2 up continuous viewing mode I find that the page arrangement is all wrong with double page spreads now on separate pages and all my carefully designed pages in the wrong places. Will the book actually get printed like this? Regards,Keith
How did you create the preview of the book? It will look exactly like shown, when you press "Buy Book", then "Preview Book". This will open the Preview of you book in the "Preview" application. Set this to "Two-page mode". Then you should be able to see your double page spreads correctly, like here:
Regards
Léonie -
URL'S of all the pages are not shown by aurora 12.0a2. on opning and browsing the net
URL'S of my firefox has been gone. i cant see the url's of the pages. please suggest how can i make the url's appear again.
If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/ -
How to print all the pages in wad
HI i am having a report with 3000 records when opened in wad, but when we print the Report, it is giving us records(60) on only first page, how do we print all the 3000 records from all the pages by clciking on print only once.
Thank You,
Kris.i am not able to print any pages after inserting the code, am i placing the code in the right place.
<HTML>
<!-- BW data source object tags -->
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="SET_DATA_PROVIDER"/>
<param name="NAME" value="DATAPROVIDER_2"/>
<param name="DATA_PROVIDER_ID" value=""/>
DATA_PROVIDER: DATAPROVIDER_2
</object>
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="SET_DATA_PROVIDER"/>
<param name="NAME" value="DATAPROVIDER_1"/>
<param name="QUERY" value="ZPARAMTEST"/>
<param name="INFOCUBE" value="ZEMPPRM"/>
DATA_PROVIDER: DATAPROVIDER_1
</object>
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="SET_PROPERTIES"/>
<param name="TEMPLATE_ID" value="ZEMPPARM"/>
TEMPLATE PROPERTIES
</object>
<td>
<table class="SAPBEXBtnStdBorder" cellspacing="0" cellpadding="0" border="0"><tr><td nowrap>
<table border="0" cellpadding="0" cellspacing="1"><tr><td nowrap class="SAPBEXBtnStdIe4">
<A class=SAPBEXBtnStd title="Print via Web Button" href="<SAP_BW_URL cmd="PROCESS_HELP_WINDOW" help_service="ZPRINTING" item="GR1Table">" target=_blank><nobr> Print</nobr> </A>
</td></tr></table>
</td></tr></table>
</td>
<td width="100%"> </td>
</tr></table>
<HEAD>
<META NAME="GENERATOR" Content="Microsoft DHTML Editing Control">
<TITLE>BW Web Application</TITLE>
<link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
</HEAD>
<BODY>
<P><object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="EMPLOYEE_TABLE"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
<param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
<param name="BLOCK_SIZE" value="5"/>
ITEM: EMPLOYEE_TABLE
</object></P>
</BODY>
</HTML> -
Why this site used php files in all the pages?
Hola
I download my friend's site and ALL the pages are in a folder with the file name index.php ... WHY?
Example;
Name of folder; gallery
Inside this folder, a file with the name index.php
Name of folder; contact
Inside this folder, a file with the name index.php
It has an "includes" folder with files for ;
header.php, footer.php, content.php and functions.php
and so on.
Now, this site has ONLY 7 pages, it's not like it's a monster site, so
what is the purpose of using php in every single page?
I have to tell you that my friend has a program call CKeditor and CKfinder to
edited her website.
Not sure if this is the reason why this site has been coded all of it with php files.
I'm waiting impatiently for your responce>Now, this site has ONLY 7 pages, it's not like it's a monster site, so
>what is the purpose of using php in every single page?
The reason for using php extension or not has absolutely nothing to do with the size of the site. If the site uses dynamic pages, then the page need a dynamic page extension. Even sites without dynamic pages often use .php in anticipation of using them so the file names won't need to be changed down the road.
Now, if your question is more about why they created separate directories for each page, it's probably so the url's can be accessed without including the file extension, Ex
example.com/contact
instead of
example.com/contact.php -
for instance....I have a documents that has 6 pages, I can scroll down and see all the pages but when i hit the print button it will only print 2 pages. I tried to change it in the setting part but there is no feature that allows you to change it.
For many years, Firefox has problems printing when some style rules are used. However, I am not aware of any changes for the worse in Fx4 (at least, until now I wasn't aware of any).
A couple of thoughts:
(1) Is it possible you were using an add-on in Fx3.6 that fixed this problem, but the add-on was disabled during the upgrade because it wasn't compatible? (Sometimes that can be fixed with a little hack.)
(2) Are there any obvious settings differences that could be affecting printing, such as fonts, margins, or shrink-to-fit/percentage?
(3) Does the workaround of selecting the entire page (Ctrl+a) and then choosing Selection under Print range in the Print dialog work? Unfortunately, this can slice through lines and images, but it often works around problems with style rules.
In the interest of saving paper, it often is useful to experiment with a PDF printer driver. If you don't have pdfFactory, you can install a trial version for testing: it lets you view the results without first having to save the file. (If you save with the trial version, there is a footer to that effect.)
(4) Is it an HTML5 problem? You can toggle the HTML5 parser off, but this is a global setting, not site-specific. If you are familiar with about:config, filter on html5 and double click '''html5.parser.enable''' to toggle its value from true to false. This helps for some sites, but has no effect on others. -
Can I print a 2 page spread to .PDF from a CS 3 document where the rest of the pages are NOT spreads
Since I do not know how to really describe this, please have a look and tell me how (if it's possible) if I can print (to PDF) this catalog where the pages (4) and (5) can remain as a spread and the rest of the document would print single pages. I can print this as a booklet, but it's sideways online. Our goal is to have our customers able to view the PDF online and get its full impact. We really can't do that viewing it sideways OR by having the pages 4 and 5 split up like they are.
http://provsnusa.com/pdf/Product%20Guide_GenRec_WEB_CURRENT_VERSION.pdf
The problem we're having is we would like to NOT break-up pages 4 and 5. We want this to look good for the users.
Is it possible to have 1 spread only display all the way across - in other words, is there a way to NOT split up just pages 4 and 5 in this document? The only way I know is to print ALL the spreads.
I tried: Creating the PDF with all the spreads, it does not look as good, but at least the 2 page spread is not broken up (4 and 5).
But now if I go to print the PDF with ALL spreads, then it does not print properly on letter sized paper. Are there settings I can embed where this will print properly where the end user does not have to make adjustments - i.e. We want the end user to be able to just hit "print" and it's done.
I tried: I also created this InDesign CS3 document as a PDF booklet. While this is OK, it appears sideways online to the viewer which is not desirable in this case. Is there a way where the end user can view this correctly as a booklet online without printing?
I guess as an alternative, I can upload the booklet for printing, and another version for viewing.
Maybe there's a special web based PDF viewer out there or something - I'm very ignorant here.
Any suggestions would be very helpful
Sorry for the long wind - hope I've made sense.
DanWhy not reconstruct the pages in InDesign they way you want the double pages to appear. There may even be an imposition script available that will do the trick. You could then output to pdf all the pages you want the full spread on. Leave the original to create the pages you wanted left as is.
You can ask in the ID forum about an imposition script. I know there was one with CS4, there may have been one with CS3. -
I am trying to print a fillable form - - an application for a Chinese visa. It will not print and I get two error messages: "document could not be printed" and "there were no pages selected to print." The latter is not true. Won't print at all, the page I am on, nor any series of pages inserted.
Am using a MAC desktop and a Cannon PIXMA MX922 printer.
I need to print this form now that it is filled out? What can I do?Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
EDIT: I found it and did, but still not working. -
I click File>Print. Whether I open pdf in Preview, save to pdf, or just print, I get this error. The first page is fine, but all the rest are shifted up and to the right and magnified.
I've never been able to print out a multi-page document on Firefox with my new computer. I can copy/paste the address to Safari (gross) and it prints just fine, either to pdf or to a hard copy.
Save me from having to use Safari!Making sure the fonts were embedded helped some, but it's still hit and miss. Sometimes I'm still missing pieces. One workaround I have found that works is just print one page without security to PDF, and then go back and replace the bad page(s) with them. So it will print properly, just not all the time. I have a copy of a word page and then what acrobat did to it. I just need to figure out how to post it here.
Kim -
Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages? I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew out. I have tried printing 'one single page' and it does exactly the same? Help?
Is the Poster Print feature turned ON?
-
MY photosmart B 210 is not printing with the black ink at all. Pages are coming out blank
Print report says ink is low in the colours but they do appear on the sheet but no black ink at all
It is a relatively new cartridge and genuine HP ink. Stopped suddenly
Pages from print or copy are coming out blank.
Tried to clean print heads and it says
Print System Failure : Oxc19a0003
and tells me to switch printer off and back on which I have now tried but getting the same message!
What does this mean?Hi @BrendaMC,
Welcome to the HP Forums!
I noticed that your HP Photosmart B210 printer is not printing black ink, and that the pages are coming out blank. I am sorry to hear this, but happy to help!
I would suggest to go through the following guides:
Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart Plus e-All-in....
'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M....
Ink Usage in Inkjet Printers.
Hope these guides are helpful, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Print Booklet won't let me because of multiple page sizes, even if I am using A4 for all the pages
Booklet won't let me because of multiple page sizes, even if I am using A4 for all the pages, this is the error message:
"The active document uses multiple page sizes Print Booklet works only with documents that use a consistent page size."
I am using Indesign CS6 (patches are up to date)
thank you
CeciliaDo you already see this when starting the Print Booklet dialog or later when finally putting out? If you can see the dialog windows, will the preview show all pages in same size?
-
Page -1 of 1 printed on all the pages when report is exported as txt
We developed all the reports in Crystal Report XI.
When we export the reports in pdf or word doc the page no at page footer is printed correctly, but wen we export the report in as txt file the "Page -1 of 1" printed on all the pages, is there any issue on Crystal Report regarding this.
Please provide me the solution for this.Hi,
This is a known issue with crystal report which has been identified earlier, can you verify by printing page number in your report or export the report to a word document and verify whether it prints properly.
Regards,
Vinay.
Maybe you are looking for
-
N95 Help Application not working!
i have trouble with my N95 Help Application, it dose'nt work, i can only run it, and see the main list, i did'nt complain before cause i hardly used it! but now, when i use help from other software, i get the same error " message Memory Full. Close s
-
I have received a pop-up advisory from Firefox several times, saying that my Free Download Manager is not compatible with the recommended 5.0.1 upgrade and wold have to be disabled until the compatibility problem was corrected. (I think that I did do
-
I am getting this message on my iPad : This Apple ID has not yet been used in the iTunes Store. Tap Review to sign in, then review your account information.
-
Cache issue in Reports using Parameters
Hi, I have a Report which uses multiple Regions to show conditionally based on the Parameters selected. e.g. PARAM1, PARAM2, PARAM3 (1)PARAM1,null,null - Selected : Shows Region : 1,2,3 (2)PARAM1, PARAM2, null- Selected : Shows Region : 1,4,5,6 (3)PA
-
working with FCE HD 3, getting the hang of it pretty good. but it keeps crashing. any ideas on ways to cut down on that? i don't run anything processor intensive (e.g. iTunes) at the same time. restarting doesn't necessarily improve things. PowerBook