All Tracks Forward/Backward & Missing Effects

Hi,
1. Please tell me that fcpx has the equivalent to fcp7's All Tracks Forward and Backward in the tool palette. If so, where is it?
2. In fcp 10.0.8 it says i have 472 Missing Effects. When putting cursor over the Missing Effects Title a box comes up for about 5 seconds that reveals all the missing effects, but there seems nowhere to get that list as when you click on Missing Effects nothing happens. Is there someplace we can get a list of our Missing Effects in fcpx?
Thanks,
joe

Hi Luis, Yes I understand all of that, but to get the names of those effects which can be seen for 5 seconds when putting the cursor over Missing Effects there must be someplace i can click to see a list of the effects. without the list i can't find the programs that i need to get so that those effects will be on my mac. the editor believes it's unreasonable to ask him for a list of missing effects and won't send them. thanks!

Similar Messages

  • Track Select Forward Tool / Track Select Backward Tool

    I'm an regular Premiere Pro user doing more work in Audition these days.  One tool I can't find in Audition that I really miss from Premiere Pro is the Track Select Forward Tool / Track Select Backward Tool.  Is there something like this in Audtion?  It is basically a cursor that can select everything from a point forward (or back) on the timeline.  This makes it easy to shift long projects with hundreds of clips, instead of zooming out to drag-select everything.
    Practical example is editing an hour long podcast with 100 cuts.  Somewhere in the middle of the project, one second needs to be removed.  It would be nice to make the cut, then use Track Select Forward to select everything from that point on, then slide it to fill the one second gap.
    Thanks,
    jb

    You can either use Ctrl Click to add clips to your selection across tracks. Or alternatively if you click with either the Move tool or the Time Selection tool in an blank area on any track the Marquee tool becomes available to draw over any clips on any tracks to select any clip that it touches. Or you can Select All Clips/Tracks and Ctrl click to remove them from the selection.
    In your practical example first use the Time selection tool to mark the time that you wish to delete. Then use any of the above methods to select the clips that you wish to affect. Finally use Time Selection in Selected Clips in the Ripple Delete menu to remove the unwanted part. Note the other options in the Ripple Delete menu that may also be useful to you.

  • In iTunes 10, I could type "Sinatra" in the search file, and would get a list of all tracks with "Sinatra" in any field.   In iTunes 11 I get these clever little windows, with nice arrows, but no lists to view.   What am I missing?

    In iTunes 10, I could type "Sinatra" in the search file, and would get a list of all tracks with "Sinatra" in any field.   In iTunes 11 I get these clever little windows, with nice arrows, but no lists to view.   What am I missing?

    Thanks for chipping in.   I discovered something after trying what you suggested.   I have quite a few collections of hits by year from Time Life and Billboard.  I've eliminated duplicate tracks that appear in both collections (or other CDs for that matter), but cross-reference the CD where I deleted the track and placed in in the comments section of the CD track I retained.   If I "search" by song name, only the remaining track appears.   But if I want to hear for example Classic Rock 1964, only those tracks remaining would be there when I pull up that CD.   So, I type "Classic Rock 1964,"  in the search field.  First the boxes on the right of the screen open up showing album icons.  Showing four tracks by album with a button to view 10 more, then four songs with an option to vies 18 more.   I finally noticed that at the top of the boxes is a blue band that reads, :Show Classic Rock 1964 in Music.  When I double click on this blue band, all 24 tracks from the original CD appear in the song list format even though I had deleted two of them because they appeard in a Beach Boys CD.   On those tracks, I had referenced Classic Rock 1964 in the comments field.    So, bottom line, Search will also look in the comments field if you click "filter by all" in the magnifying glass to the left of the search field.   And you can move all tracks that if finds into a song list by double clicking on the blue band.

  • I'm using Logic 9 with a Macbook Pro. On one project I'm getting a message ' not enough processor power.' I've tried freezing all tracks but this seems to have no effect. I've also bounced all soft synths to audio.

    I'm using Logic 9 with a Macbook Pro. On one project I'm getting a message 'not enough processor power' and the computer stops playing
    I've tried freezing all tracks but this has no effect. I've also bounced all soft synth tracks to audio, but to no avail. The computer stops playing
    even at the start of the track where there is nothing but a kick drum happening.......

    Thank you for the suggestions.
    I had previously tried all of the above but the airport/wireless thought. Unfortuneately, none of these things made a difference, including the wireless suggestion.
    Currently, I am using my Mac's "cheapo" internal audio hardware  (haha). I have a one year old 27-inch iMac,  a good pair of bose speakers, and a polk sub. I don't believe it is an issue with my setup, considering I completely disconnected and unplugged it.
    I did, however, do a little info hunting on the internal audio situation, since I was curious what is actually included, and I stumbled upon this interesting little tidbit about my model of iMac:
    https://discussions.apple.com/thread/2718054?start=0&tstart=0
    I had previously wondered if I was hearing my mouse in my speakers as well (not just in logic). It appears that this model of iMac may have some grounding issues, as someone later in the thread suggested purchasing and using a ground loop isolator, which seemed to fix any extra interference for them.
    Ironically though, I have since opened logic, and do not seem to be encountering my previous static issue(yet).
    Fingers crossed, hoping that I will not be experiencing it again. Going to purchase a ground loop isolator, and continue to mess around with logic, just to make sure it was not just an internal audio issue with my iMac.

  • To extend a clip I have `Show Fine Tuning controls' turned on in my iMovie 11 preferences, but the blue forward/backward buttons don't appear.  To get the orange handle bar, is there a hotkey?

    To extend a clip I have `Show Fine Tuning controls' turned on in my iMovie 11 preferences, but the blue forward/backward buttons don't appear.  To get the orange handle bar, is there a hotkey?

    That's a comment in the file. It has no effect at all.

  • Step Forward/Backward One Field

    Sadly, Avid Media Composer has been my daily editing tool (my place of employment is an Avid house). I started on FCP and freelance using my FCP machine... believe me, I would very much rather be cutting on FCP. Going from FCP to Avid is... well... an interesting and frustrating experience.
    However, AMC does has some useful features. One in particular is the "Step Forward/Backward 1 field."
    I searched the manuals and the FCP shortcut tool, but I don't really see anything similar-- unless I'm totally missing something. Does FCP have such a feature?
    Thanks a bunch.
    Message was edited by: Anthony Tutrone

    You know what, unfortunately even that doesn't really work ... when the playhead is still FCP only ever displays the Upper Field in the Canvas +unless the canvas is set to 100%+. I once filed it as a bug but I am assured that this is how FCP was designed to work therefore it is not a bug. Go figure. If you add the Deinterlace Filter and tell it to remove the Upper Field you'll still see the upper field when the playhead is paused in the timeline, although It does correctly remove the Upper Field during playback and when rendered. The only workaround I'm aware of is to set the zoom level of the canvas window to 100%, at which point both fields are visible, and any field based effects are properly displayed.

  • How to "Export All Tracks as Audio Files" in Pro Tools?

    I have a Pro Tools session that I want to mix in Logic. So I need to bounce all tracks as audio files like Logic's "Export All Tracks as Audio Files" command. Does anyone know if this is possible in PT, or do I need to bounce one track at a time (in realtime!)?

    Sorry, but the previous answers are not quite correct. Consolidate tracks will only merge all your edits and fades and make a new audio file out of it. It wont consolidate any automation or insert effects. The same is true for exporting audio from the regions pane. Therefore you still have to perform a "bounce to disk" in order to consolidate properly. So no it doesn't have the "Export All Tracks as Audio Files" option......
    Christian,
    When "exporting" from one DAW to another, it's generally understood that automation and plug-ins will not be included.
    Exporting from Pro Tools does indeed bounce the files to disk. We aren't talking about a stereo mix here. We're talking about exporting all the individual tracks. Are have I misunderstood you?
    .... which leads me on to this question. How long has logic had the "Export All..." function as I have been performing "track lays" (i.e. getting my logic stuff ready for a pro-tools mix) for films that can often take days to perform and am embarrassed to stumble across this option on this forum as I fear I may have cost myself several weeks of my life working the long way round!!!
    "Export All tracks as Audio Files" was introduced in version 7.0.
    Don't feel too ashamed though. I have a good friend, who has been using Logic daily as long as I have (8 years or so now), who only 3 months ago, saw me utilizing that feature, and his jaw dropped. He too, had been wasting "weeks" of his life, doing it the way you have been doing it. : )
    You're gonna absolutely LOVE using that feature from this day forward...!

  • L9 - all tracks seem to "software monitor" when set to record! BUG?!

    Hi Guys,
    Not sure if this is another Logic 9 bug or if I am just going crazy!
    Often when recording tracking parts, I need to record three or four tracks at the same time. For example, today I was recording vocals, keyboard and bass.
    I always monitor the vocals through Logic, so the singer has some reverb in real time. However, for zero latency monitoring on piano and bass, I would usually just monitor them straight through the mixer and not through Logic.
    To achieve this in Logic 8, I would press the "software monitoring" button (the green one beside the transport window). I'd also press the orange "Low latency mode" button to make sure the tracks that were software monitored would not have any latency.
    Then I would select record for all tracks I was recording, and I would press the "i" button (orange button for input monitoring) for the tracks that I actually wanted to software monitor. Tracks with "i" pressed (usually just vocals) would monitor through Logic with effects, the rest would just be monitored through the mixer.
    In Logic 9, this isn't working! Even if I only press the "i" button on one track, ALL of the tracks are coming through Logic. It seems to be applying software monitoring to ANY TRACK THAT IS IN RECORD MODE, even if the input button isn't pressed for that track!
    So I either have to have ALL record-enabled tracks software monitored (which induces a little bit of latency for the keys and bass) or NONE (and leave the vocalist without any real-time effects in the mix while he sings).
    Am I missing something here? Is there a new setting somewhere that automatically sets all record-enabled tracks to software monitor mode when the software monitoring button is pressed in the transport bar?
    OR... is this a new bug?! It's a big one if it is!
    I'd love to hear what other people think... or if anyone has a suggestion that might help with this? I might just be missing something obvious here, but I don't think so...
    Thanks heaps guys!
    Mike

    yeloop wrote:
    Hi Guys,
    Not sure if this is another Logic 9 bug or if I am just going crazy!
    Often when recording tracking parts, I need to record three or four tracks at the same time. For example, today I was recording vocals, keyboard and bass.
    I always monitor the vocals through Logic, so the singer has some reverb in real time. However, for zero latency monitoring on piano and bass, I would usually just monitor them straight through the mixer and not through Logic.
    To achieve this in Logic 8, I would press the "software monitoring" button (the green one beside the transport window). I'd also press the orange "Low latency mode" button to make sure the tracks that were software monitored would not have any latency.
    That's not what Low Latency Mode does, it only bypasses high latency inducing plugins, there's a threshold setting in Logic. But that's not the problem...
    Then I would select record for all tracks I was recording, and I would press the "i" button (orange button for input monitoring) for the tracks that I actually wanted to software monitor. Tracks with "i" pressed (usually just vocals) would monitor through Logic with effects, the rest would just be monitored through the mixer.
    That's not how it works here (on version 8.02)
    With software monitoring enabled any track in record mode is passed through Logic's audio engine. Input monitoring only works when a track is -not- record enabled. At least that's how it's working with my RME hardware.
    Perhaps you're thinking of "Auto Input Monitoring", try adding that button to the transport bar and see if that's working the way you expect. Any tracks set to input monitoring and record will pass their signal thru Logic, tracks set to record only, will not. The sequencer has to be running so the vocalist wouldn't hear reverb until you actually start recording.
    pancenter-

  • How can I quickly get the same album art for all tracks on an album without manually doing them one at a time?

    I am having trouble with album art linked to each track. My library is ripped from my own cd's and ITunes only provides some of the artwork from a find artwork search. The rest must be found and added one at a time manually from web. This process is tedious and time consuming for me. Is there a file in iTunes related to each album that I can just drop the art once and it shows up linked to all the tracks from that album when they play? I've tried selecting all songs from an album and dragging the artwork to the artwork window once in hopes of all tracks getting the artwork at the same time with no luck. Any advice for this paltry artwork dilemma would be appreciated. If Cassidy & Greene still owned this ******* child of SoundJam I know I would not be having this problem! HaHa...Thanks for any advice/help with this problem.

    Thx 4 quick reply alexbird. Your method will work and after a little experimenting so will this: Just go to the album art view option and highlight the album you want artwork for. Drag the artwork from your album art web search page to bottom left hand album art window in iTunes and just drop it there. A small progress window then appears showing each album track adopting the dropped artwork one by one. It only takes 10-15 seconds for all of the tracks on your album to adopt the new artwork. I then went back and removed unwanted artwork(from the albums that had it) track by track from the get info menu. This goes pretty quick as you just pick track>get info>artwork>highlight art>delete>ok for each track.
    This drag/drop to the album art view page has been the simplest and most effective way I have discovered to manually import album artwork into iTunes so far. Hope this helps someone else out there. Any other methods or suggestions to do this task added to this thread will be duly noted. Thx... Oh, I am currently using iTunes 10.5.1

  • When you download iTunes material, does iTunes record the IP used where it is being downloaded to?  I am trying to track a lost/missing IPOD Touch and want to know if they have that data.

    When you download iTunes material, does iTunes record the IP used where it is being downloaded to?  I am trying to track a lost/missing IPOD Touch and want to know if they have that data.   It was left on a small street and someone has found it and has been hacking into my account by resetting my password.  They took about 41+ dollars from my account.   I am hoping the IP it was connecting with to download to it was tracked and that I can get that information to figure out where it is located.

    No. From the second link below.
    "Apple does not have a process to track or flag lost or stolen product
    - If you previously turned on the FIndMyiPod feature and location service is on, and wifi is on and connected go to iCloud, sign in, and go to FindMyiPhone. It the iPod has been restored it will never show up.
    - Report to police and change the passwords for all accounts used on the iPod.
    - Apple will not help
    Reporting a lost or stolen Apple product

  • Backward- Forward  and Forward- Backward

    Hi, all!
    Can you explainfor me about +Backward- Forward  and Forward- Backward+ in General Setting-> Inventory tab-> Planning.
    I don'nt understand it, can you make clealy
    Thank you!

    Hi....
    Consumption Method – there are two available methods of forecast consumption
    by the Sales Order:
    • Backward- Forward – In this method, the Sales Order first goes
    backwards to 'consume' the forecast which is closest to the Due Date of
    the order and continues to the first day of the range if required (as
    defined in Days Backward field below),
    After that, if no forecast is found (or the forecast, which was consumed,
    was insufficient) the Sales Order goes from the Order's due date and
    forward (see an example below).
    • Forward- Backward - In this case the sales order goes forward to
    'consume' the forecast which is closest to the Due Date of the order and
    continues up to the last day of the range if needed (as defined in Days
    Forward field below). After that, if no forecast is found (or the forecast,
    which was consumed, was insufficient) goes from the Order's due date
    and backward.
    Days Backward - Defines the maximum number of days for the Sales Order to go
    backwards in order to 'consume' the forecast.
    Days Forward - Defines the maximum number of days for the Sales Order to go
    forward in order to 'consume' the forecast.
    If you are not yet understand you can search in SAP Portal a note that related to that.
    Or if you want, you can send me your email address and i will send you the PDF file about MRP.
    It has complete explanation for you to know.
    Regards,
    Lina Yuanita

  • Listing tracks/albums with missing art

    Is there any sensible way to list out only the songs/albums that are missing album art?
    Wading through all of them manually in the "Cover Flow" view is not an option, I've got far to much music for that.
    If I could pull out a "missing art" report of some sort I'd atleast have a decent starting point for scanning/downloading covers.
    On a related note; Is it possible to "tag" albums you don't want iTunes to process when downloading art? A "Missing arts" view/filter would solve this, i suppose.
    (Highlighting all tracks in this view and fetching the art for only those.)
    Also; is it possible to exclude tracks I know there won't be any art for?

    Please go the following website - http://dougscripts.com/itunes/. Doug's scripts is an invaluable resource for this. Search using managing artwork. You will find a script that will copy all songs w/o artwork to a playlist. It will search you whole library. Not sure if you can exclude some, but why bother. Once you have the songs w/o artwork identified, you can add the artwork, delete songs form the list or delete the whole list.

  • Missing effect problem!

    I have downloaded a project from a friend and in this project he uses the plug-in effect Trapcode Particular. I knew this before i downloaded his project so i intalled the effect on my machine too. But now when i open his project i always get the error message "This project contains 5 references to missing effects. Please install the following effects to restore these references. ("Particular")" and i have no idea why??
    I've tried to reinstall several times, both after effects and trapcode particular but nothing seems to work, always the same error message. I've installed the effect in my programs folder, in the adobe folder, in the after effects folder, in the after effects/support files/plug-ins/effects folder but still nothing! I've also read somewhere that if you get these type of error messages the effect will work anyway but it doesnt! And in the "effects and presets" panel the effect shows up under the missing tab??
    Another wierd thing is that if i go to my timeline and then click on "rain" wich is the layer particular is used on, i can still use and configure all the settings for the effect in the effect control but nothing happends on the screen. And istead of just saying "Particular" in the effect control it says "Missing: Particular" even if i can still tweek the settings!?
    I really need help with this,isthis a bug or glitch or what, anyone else ever had this problem or similar, please help!

    it says "Missing: Particular" even if i can still tweek the settings!?
    Yes, this is as designed and ws introduced in AE 7 or CS3 (can't remember exactly...). the rest is unclear, since you didn't say anything about which version of AE nor your operating system. On a guess I would say you run CS5, but do not use the correct 64bit versions of the plug-ins, so naturally, nothing shows up because it cannot support 32bit plug-ins. Other than that it could be anything from permission issues to some system DLL used by the plug-ins missing...
    Mylenium

  • After a recent clean install, unable to open all tracks / instruments in saved GB projects.

    Hi
    Since a clean install about a month ago, I am unable to open all saved Garageband projects without tracks or instruments missing and GB wanting to search for the files missing.
    I am not sure if this is something to do with 10.8.2 or more recently with 10.8.3 or a problem installing from the oringal DVD and chaning the date my mac.  I had so many problems previously trying to install iPhoto from the DVD I have now bought the app from the App Store.
    Thanks in advance.
    Matt

    I'd also try trashing...
    /Users/nnnn/Library/Preferences/com.apple.internetconnect.plist
    /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
    /Library/Preferences/com.apple.sharing.firewall.plist

  • TS1424 Who do I contact in regards to a faulty album download? Specifically, a duplicate track and a missing one that is available as "album only"

    Who do I contact in regards to a faulty album download? Specifically, a duplicate track and a missing one that is available as "album only"

    Depending upon what country that you are in you might be able to try 'redownloading' it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes. If you aren't in a country where you can re-download music then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that album and use the 'Report a Problem' link.

Maybe you are looking for