All video playback is black, but can hear audio.

I'm using a trial of CS6 and having trouble with imported clips. In the past I have been able to open these clips in CS5.5 and CS6 when on Windows 7. Now I am on Windows 8 and they are all black when I open them in CS6. They do play in windows media player just fine though.
I do game recording and the clips were originally recorded with mjpeg compression. On Windows 7 I encoded them using the default Youtube 1080p preset in CS6.
So far I've tried installing the motion mjpeg codec trial, and it didn't work. Tried installing the full k-lite codec pack, that didn't work.
My hardware:
i5 2500k @ 4.3GHz
16GB DDR3
2x 670 GTX SLI (althought Premiere is set to only use one GPU)
128GB SSD
3 1TB 7200 RPM Hitachi Deskstar single platter HDDs

Harm Millaard wrote:
Pull out one of the video cards, install the Morgan or Mainconcept MJPEG codec and try again. Also make sure you have the latest nVidia driver, 310.64
This didn't fix anything unfortunately. And now I'm back on Windows 7, fresh install and using the 310.64 drivers I've been using all this time. Still have no video and can only hear the audio when watching in the source or sequence monitor. Clips play perfectly fine in windows media player.

Similar Messages

  • Video won't play but can hear audio

    I just purchased some videos for my iPod touch (I believe 2nd generation) and the videos won't play but you can hear the audio.  All I get is a blank screen.  Why is this happening??!!  What can I do??!!

    - Does the video play OK on your computer.  If yes go to the next item.  If not report the problem to iTunes and they will give you a redownload.  Tp contact iTunes:
    How to report an issue with Your iTunes Store purchase
    - I would try transferring the video to itunes on you computer and then deleting it from your iPod.  The go to Advance tab in iTunes and select the Create iPod and iPhone Version and then sync to your iPod.

  • Updated ipod Touch 4G to ios 5. TV out now not working, but can hear audio.

    I solely use my ipod at the gym, on the treadmills which have tv's and ipod connections built in. Prior to the ios 5 update, I was able to connect the ipod to watch mp4 videos, from the video app that comes with the ipod. To clarify, these are videos I created, not downloaded. They are created from dvd's that do not have protection. Now that I updated to ios 5, I can only hear the audio, the video does not appear on the tv. The ipod shows that a tv is connected, but again, not seeing the video feed. Has anyone else had this or a similar problem with tv out? If so, is there a fix?

    Exactly the same problem here.  In another thread some claim this problem is fixed by doing a restore with iTunes.  I haven't tried that yet.

  • Can hear audio, but video blacks out every few seconds; picture comes back when we hit the tv's volume button

    We can hear audio, but video blacks out every few seconds; picture comes back when we hit the tv's volume button. Everything seems to be plugged in well. The picture even starts out being sort of dim. And it goes through phases of working fine but then will randomly start blacking out again.  Any ideas?

    Welcome to the Apple Community.
    Have you tried turning the TV off and on again.

  • Can hear audio but get no video in QT player or iTunes or Safari

    I can hear audio, but get no video (ie just a blank window or the "first frame" of the video) when playing basic ".mov" movies using QT Player. I also get the same behaviour when trying to watch movie previews in iTunes. I get the same behaviour when trying to watch QT movies in Safari (for example the latest apple advertisements from apple.com), although ironically I was able to watch the entire Macworld keynote without a hitch in QT Player?!?!
    I know my mac is now "getting on", but I know it is still capable of displaying "ipod" sized movie trailers in iTunes.
    Real player, cameraid, graphic converter and btv pro can all play the movies QT Player cant. Firefox can play the movies that Safari cant play. Unfortunately there isnt an alternative for iTunes.
    Can anyone give any reason or solution to the fact that the core Apple applications are unable to play Apples own movie format when out of date, 5 year old, 3rd party software can?
    I have tried
    1) deleting the QT plist files
    2) reinstalling flip4mac, perian, realplayer and flash, and
    3) have just updated QT an iTunes to the latest version.
    Any ideas?
    The only hint I can think of, is that when playing a movie in QT Player, if you minimise the movie to the dock, and then bring it back to the desktop....it displays the "current" frame of the movie which sits there "frozen" until you do it again ... and just repeating, audio is fine.
    The Plugins in my HD/Libary/Internet Plug-Ins folder are:
    Flash Player.plugin
    flashplayer.xpt
    Flip4Mac WMV Plugin.plugin
    Flip4Mac WMV Plugin.webplugin
    Java Applet Plugin Enabler
    Java Applet.plugin
    JavaPluginCocoa.bundle
    NP-PPC-Dir-Shockwave
    nsIQTScriptablePlugin.xpt
    Quartz Composer.webplugin
    QuickTime Plugin.plugin
    RealPlayer Plugin.plugin
    VerifiedDownloadPlugin.plugin
    Are any of these out of date?
    Any help would be much appreciated.
    Cheers,
    Brad.

    Yes Techmo, persistence is the secret.
    After the QT 6.4.5 update once again made no difference, I gave up with a brand spanking new 2.8Ghz iMac only a couple of days away.
    On cleaning out the old mac getting ready to transfer files to the new mac, I unplugged everything but (of course) power, keyboard and mouse.
    I dont know why, but I tried a movie...and it worked like a charm.
    I dont know what was plugged in that was giving QT grief, but I suspect it may have been my ageing Orange Micro iBot webcam. Too late now to find out (and I no longer care as I gaze on my new 24 inches of beautiful screen real estate), but for all those with this problem....try unplugging everything as I did and see what happens. At least it might be a starting point to solving your problem.
    Strange it only affected Apples own applications though???

  • Why can't I see video but can hear sound on Apple TV ?

    WWhy can't I see video but can hear sound ?

    Not all apps are enabled for airplay, this is up to the developer to do.

  • My thuderbolt display is 3 weeks old which I'm using as display for my mac mini. I no longer get the display on but can hear the sound. Please suggest.

    My thuderbolt display is 3 weeks old which I'm using as display for my mac mini. I no longer get the display on but can hear the sound. Please suggest.

    Make sure the mini-displayport/TB plug is fully seated.  It may look fully plugged in but isn't.
    Make sure the Displays system preferences has an Arrangement tab.  No Arrangement means the monitor is not being detected.
    Do a smc reset.
    If none of this works I suggest you take it back to apple (along with your mini).

  • My mac book pro version 10.6.8 screen brightness doesn't increase its just black but can see icons when m 2 close to the screen..how can the problem be solved

    my mac book pro version 10.6.8 screen brightness doesn't increase its just black but can see icons when m 2 close to the screen..how can the problem be solved

    Try resetting the  SMC http://support.apple.com/kb/ht3964
    You can get an idea for repair from these site. Check locally for your area.
    https://www.techrestore.com/mac/
    http://www.dttservice.com/macbookprounibody.html
    http://www.myservice.com/macbookpro.html
    http://www.ifixit.com/Device/MacBook_Pro
    http://www.PowerbookMedic.com

  • HT1444 FaceTime calling FaceTime can't hear me when talking but can hear them on macbook pro  but using FaceTime iPhone works good family has mac pro same but it works fine

    face time on mac book pro 15.5 cant hear me talking but can hear them family has same computer but it works fine facetime on Iphone works good to    

    Does your mic work in System Preferences?
    System Preferences > Sound > Input
    There is an Input Level meter that should light up when you talk. Just to make sure your mic and Mac are working.
    Which mic are you using? Are  you using the built in mic on an Apple Display? I have Apple's LED display and every time I use Facetime, as in place or take a call, the mic input volume gets reset to a level so low, people can't hear me. I have to manually raise the mic volume back to where I had set it. When I end the call, Facetime resets the volume back to where I set it. If I don't reset the mic volume level on each and every call, people can't hear me.
    I called Apple on this. They downloaded a log file tool to my Mac and took some logs. Then they called me back and said this works as designed. Incredible.
    So, if you are using Apple's LED display, this may be your problem. Note that the mic volume level gets set low and reset back only during a call. If you check it before a call and then after a call, it looks fine as if nothing changed. Open up the Sound prefernces and watch it get reset in real time.

  • I want to remove all music from my iPhone, but can't. On the music sync page I uncheck sync music, but songs remain on my phone. why?

    I want to remove all music from my iPhone, but can't. On the music sync page I uncheck sync music, but songs remain on my phone. why?

    Deleting song from iPhone and iTunes - https://discussions.apple.com/thread/3765496

  • I can't watch Dailymotion videos on my iPad but can do so on my iPhone and PC. Very strange. Please help !

    I can't watch Dailymotion videos on my iPad but can do so on my iPhone and PC. Very strange. Please help !

    Take it to an Apple store genius bar to have the techs see what your options are for repair/replacement.  An out-of-warranty replacement is $149 in the US for the iPhone 4.

  • When I plug in headphones no sound through headphones,  but can hear music through ipod.

    I plug in my headphones and no sound comes through the headphones, but can hear music from the ipod. Anyone  have any solutions?

    If you truly own an iPod classic, I'm not exactly sure how music can be heard playing from it, since it doesn't have an external speaker.
    Have you tried a hard reset yet?  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear. 
    It might not hurt to try a different set of headphones as well.
    The last resort is to restore the iPod to factory settings via iTunes and if the issue still persists, it's likely a hardware problem with the headphone jack.
    B-rock

  • Cant hear Siri or any music or typing through speaker but can hear ringer

    Cant hear Siri or any music or typing through speaker but can hear ringer

    There might be something in the headphone jack, maybe lint, dirt, or something else in there. Try disconnecting the headphones and then adjusting the volume, does it say headphones?
    You might be able to get it out by connecting the headphones 5-10x or spraying compressed air into the jack.
    If that doesn't do it, try resetting or restoring the iPhone.

  • I have deleted all my photos off iPhone but can still view them on appletv . How do I get them back on my phone?

    I have deleted all my photos off iPhone but can still view them on appletv . How do I get them back on my phone?

    If you have deleted all the photos from your iPhone you can't get them back.  The only place they might exist is if you backed them up to iPhoto if you have a Mac.  If you have iCloud and Photo Steam enabled, then the last 100 photos would be saved in your Photo Stream.

  • HT1212 My sons old iPad 1 is rarely used, but, when i charged it up the message was "iPad is disabled try again in 22,824,852 minutes"  sorry but thats a bit of a wait!  I have gone through all the various reset methods but can't get around the disabled s

    Hello,
    My sons old iPad 1 is rarely used, but, when i charged it up the message was;  "iPad is disabled try again in 22,824,852 minutes"  sorry but thats a bit of a wait! 
    I have gone through all the various reset methods but can't get around the disabled status??
    Can't see another way to reset it.
    Could it be for the bin.
    Only wanted to give the youngest daughter the iPad to take to school.
    Hope someone can help
    Thanks
    Jonny Burns.

    Is this how you do it?
    1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
    2. Connect USB cable to computer
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune (make sure you have the newest version of iTune)
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

Maybe you are looking for

  • How to restrict phase confirmation

    Hi Gurus, I want to restrict the confirmation of succeeding phase 0020 before phase 0010 is complete. That is, we have to ensure that 0010 should be complete, only then 0020 will be allowed to start? How to do that? In my case, execution is done in e

  • Expanding column header interactive Reports dynamically

    In my interactive Reports one of my columns specifically my db_CUSTOMER_NAME column can be from 3 to 50 characters. (or even longer...) Was wondering how i can dynamically expand that td column "Dynamically" because i dont want to put a fix length ju

  • Set variables from recordset

    I have an SQL table that I store OrderID, ItemID, Qty.  There are 15 possible ItemID's (will never be more).  I need to output the order into a single table row that shows the orderID and the qty for each item. For example: <cfquery name="orders" dat

  • Fix for 1013 error when upgrading to 4.2

    The link below was actually posted to fix another error, but it worked just fine to fix the 1013 error I was having when upgrading to 4.2. http://discussions.apple.com/message.jspa?messageID=11816311#11816311 STEVE

  • How to block certain websites ?

    <blockquote>Locking duplicate thread.<br> Please continue here: [[/questions/960285]] </blockquote> i dont want my child to be able to access any adult websites, any way i can block them ?