All videos now say plug in blocked after software update

why does the message "plug in blocked" show up in place of a video?  I just did a software update to my Mac Pro.

I had the same thing happed to me. I'm at a lose as to how to correct it. Did anyone help you out?

Similar Messages

  • HT1476 Is any one else's iphone 5 now shutting down at 40% after software update

    iPhone dying at 40% since software update. As soon as I plug it back it comes back to 40%. It's clearly the software update causing the issue. How can I resolve it

    Hello there, richsim68.
    The following Knowledge Base article offers up some great steps for troubleshooting the issue you're describing:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Particularly:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I already have flashplayer on my mac. I have been using online video tutorials for learning, but suddenly all my YouTube vodeos say "plug-in blocked". I follow the instructions for installing or updating, but nothing has helped. I have looked everywhere i

    I already have flashplayer on my mac. I have been using online video tutorials for learning, but suddenly all my YouTube vodeos say "plug-in blocked". I follow the instructions for installing or updating, but nothing has helped. I have looked everywhere in Safari help with no success. How can I restore this plug-in, PLEASE?
    Austin Moore
    Knoxville, Tennessee

    I already have flashplayer on my mac. I have been using online video tutorials for learning, but suddenly all my YouTube vodeos say "plug-in blocked". I follow the instructions for installing or updating, but nothing has helped. I have looked everywhere in Safari help with no success. How can I restore this plug-in, PLEASE?
    Austin Moore
    Knoxville, Tennessee

  • I tried to update my sons iPad and now it won't turn on or off just a picture of a cable and I tunes symbol. Can it be fixed or is it broken I've seen posts saying their iPads died after doing updates.

    I tried to update my sons iPad now it won't turn on or off it shows a cable and iTunes symbol tried holding down sleep button & screen button but no luck does this mean it's Broken I've seen posts saying their iPad died after doing updates.

    It's not broken, it just means that the iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
    You will need to connect the iPad, via its cable, to a computer's iTunes (you will need an up-to-date version of iTunes installed on the computer), and you should then be able to reset the iPad and restore/resync the content to it.

  • Cannot get Flash player to work , it says plug in blocked, even when trying to download latest version it still says the same

    cannot get Flash player to work , it says plug in blocked, even when I download the latest version of Flash Payer it gives the same message, what do I do to unblock the plug ins?

    You cannot use OS9 to repair your 10.4.11 Disk. Did you delete Disk Utility? Are you sure it's not in Applications>Utilities?
    Tough without the Install disc, but some things to try...
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214

  • Plug ins blocked after new download

    I keep getting the message Plug ins Blocked since I updated this morning. I have a MAC 10.6 with Safari 5. How do I get this fixed? I am not computer savvy so I need step by step directions.
    Thanks.

    Uninstalling and Reinstalling will usually solve this:
    Uninstall Flash Player | Mac OS
    Then download and run the installer:
    http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

  • You Tube not playing video on Firefox with Adobe Flash after latest update

    You Tube and other sites are not playing video on Firefox with Adobe Flash after latest update for both. Adobe Flash is working on other sites but not You tube and those sites that may have embedded You Tube videos, I'm not sure.
    Adobe Flash does not crash and no error message is showing. All that shows is a dark screen for the Flash video. Right clicking the screen shows only a non-clickable 'Movie not loaded' and the clickable link to the Adobe home page.
    I have spent an hour trying things as suggested for past problems similar to this but none have helped.
    I have sent sad face letting you know what I think of the latest update because of this which says pretty much the same thing as I have said here.
    I have no further info but if I had some input and queries form you I might be able to provide more.

    I'm not sure how to remove the 12.xxx version,. I don't understand why it is there, usually updates over wirte the old one as far as I know. I don't know where to find it.
    pref .js deleted.
    I could not find a user.js
    I disabled hardware acceleration on one of them, not sure which and I don't remember how I did it but think it must have been on the flash.
    No idea what protected mode is
    no new profile, I've never done this.
    Ok, did what you have said as much as I could. I have been fidgeting with things now for a couple hours. After doing a CCleaner and Registry cleanse, turning off and restarting the computer, the videos are now p-laying.
    I would still like to know how to find and get rid of the duplicate Flash plug in though if you would't mind.
    Thanks for the help.

  • IPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines

    iPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines.
    I found a video on youtube with similar issues - http://youtu.be/Xuuqxx18-bA
    EVERYTHING HAS BEEN TRIED: Restore, Reboot, Recycle, Replacing Cables, etc....
    I don't have Apple Care, what to do? Spend more money and buy a new phone?

    Here is another person who has a problem with the iPhone 5 screen https://www.youtube.com/watch?v=sc1ZPWSA8dc and they have just received them NEW!!!!!
    I myself, two days ago purchased a  2nd hand iPhone 5 that was advertised as having a line of squares at the bottom of the screen. I Googled it and found people saying it was a screen issue and to replace the screen, so I did this and it is still happening with a new screen.
    I am starting to dislike Apple intensely after reading forum posts and watching videos where people are asking for help and telling us about issues that they are having with their phones.
    Why is Apple getting it so wrong with their updates and manufacturing that they are completely destroying iPhones that cost a lot of money and then expecting the owner to purchase another phone unless they are still in warranty.
    Apple you should be going out of your way to put things right for people but instead there is a wall of silence over so many of the issues destroying peoples phones.
    SHAME ON YOU!

  • Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????

    Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????  AT&T my DSL carrier suggests I get a new router.  Apparently the one I have is really old and doesn't support my Macbook Pro.  Does this sound right?

    If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
    Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
    One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
    One for entering into devices, computers etc for Internet Access Only.
    You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
    Also if you give out the password to another, they can't hack the network with the guest access password.
    Computers remember the internet password, so anyone with access to your machines or network will have the password.
    Since you have another Admin only password, they can't hack in. got it?
    You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
    Good luck.

  • HT4623 my ipad is now asking for a passcode after i updated it - I never had one before - what do I do?

    My ipad in now asking for a passcode after I updated it -  I never had one before

    Restore the ipad via itunes on a computer, hopefully you performed regular backups
    How to restore
    Via itunes
    http://support.apple.com/kb/HT1414

  • Ios7 is out now and when i go to software update in settings it says i am up to date at ios 0.6.3

    Ios7 is out now and when i go to software update in settings it says i am up to date at ios 0.6.3

    What version of the iPod touch do you have?  iOS 7 only works with 5th Generation.
    The Apple servers are slammed right now with iOS 7 downloads AND activation requests.
    Be patient and try again later.

  • My ipod was disabled and i tried to restore it, now i am downloading an apple software update which is taking a **** lot of time and ipod is still disabled.. will it be ok after the download ends? help please..!!

    my ipod was disabled and i tried to restore it, now i am downloading an apple software update which is taking a **** lot of time and ipod is still disabled.. will it be ok after the download ends? help please..!!

    We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.

  • Mail outgoing servers say they are disconnected - after an update was installed

    When I updated to Mavericks I had this problem with Gmail and a Yahoo account.  I can receive e-mail, but not send. It tells me the outgoing servers are disconnected.  Now the problem is back after an update.  I tried the 995 and 465 ports - does not work.

    Hello slesage,
    Thanks for using Apple Support Communities.
    To troubleshoot issues with Mail on your Mac please follow the steps in the article below.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Take care,
    Alex H.

  • Problem restarting after software update

    Computer is fine, drive 40% full, no speed problems...
    But it just won't restart after software update runs, nor will it restart or shut down from finder.
    Problem solving so far: Safe boot, reset pram, ran disk utility, ran disk repair using install disk, ran fsck -y, ran disk warrior.
    Is annoying. ANy ideas anyone? If not, what is the procedure for updating using sudate and terminal, as when I use software update, a force shut down will not install.
    ANy ideas folks?

    Some general advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • Internal camera failure after software updates...first skype couldn't......

    Hello!
    I am having internal camera failure after software updates...first skype couldn't find the camera, and now photo booth also says camera is not connected. Its a brand new MacBook Pro which has been working fine for a month, but after a software update (the blinking message said i had 13 new things to update...you know what I'm talking about right?) all of a sudden Skype couldnt find a camera, so i went to the skype community and tried some things (like trashing skype) but now photo booth says no camera detected, which is weird cause the camera is built into the computer..
    Please help!
    Thanks
    O

    First, reset the SMC:
    http://support.apple.com/kb/HT3964
    If that doesn't help, then take it to an Apple Store for examination.

Maybe you are looking for