All VIs containing MathScript cause a fatal crash after upgrading from 8.2 to 8.5... what gives?
So I finally took the plunge and updated to 8.5 from 8.2 and now when I open a project that was previously done (as in ready for release this week ) it causes a hard crash where LabVIEW closes completely. I've looked and can't seem to find any others complaining of this. My only option that works at this point is to have a coworker open all my VIs containing mathscript and delete the function with his 8.2 enviornment. What could be causing this? There has to be some simple answer...somewhere.
Thanks in advance for all the help!
Regards,
Dave
These VIs work fine for me under LV 8.2 and will no longer work under LV 8.5. The first one is a call to our power supplies, the second uses the math formula node to verify that some color and luminance parameters are valid.
In the meantime I am stuck using a coworkers 8.2 development system with TS 3.5 to deploy which works with no issues. When I try on my new system with 8.5 and TS 4.0 it crashes out.
Thanks for any help you can provide.
Regards,
Dave
Attachments:
DMM - IVI Measure.vi 52 KB
Verify Color and Brightness.vi 174 KB
Similar Messages
-
Graphics instability and crashing after upgrade from FF 32 to 33
Soon after upgrading from 32.0.3 to 33 (Windows 7), I was seeing occasional flicker-like split-second black flashes. (I *think* this was mostly when opening new pages, but I don't recall for sure...maybe also when scrolling). Then a few minutes later I was scrolling a page with my laptop touchpad and the screen flashed completely black, stayed that way for about a second, and then came back up with a Windows message that Intel Graphics had recovered from a crash. (Which is doubly interesting given that FF set to use my discrete NVIDIA graphics on this computer.). I haven't seen anything like this happen in the nine months I've had this laptop, with or without FF open. There was also a message that FF had crashed.
Then I restarted FF, and all was going OK, except that I believe I still saw a few split-second "in the blink of an eye" black screens as I opened new pages. But then I went to Google Maps, and was dragging a map upwards. But instead of the lower portion of the map moving into view, I only got a blank white screen. The further up I dragged the map, the more of the the screen that was blank white, until it was completely white. Then FF crashed again.
I thought the new FF native H.264 might be causing the issue so I disabled it and restarted FF. But then I went back to Google Maps, tried the same thing and had the same issue (but no associated crash, although I closed FF very soon after I saw the odd graphics behavior recurring so maybe I didn't give it enough "time to crash").
I re-installed 32.0.3 and all the issues went away. FWIW, I've had occasional crashes and slowdowns with 32 and other recent versions. (I could recover from the slowdowns just by restarting FF.) Most of those issues seemed to be associated with Adobe Flash. That behavior was an occasional annoyance but nothing of the magnitude of what happened when I tried FF 33. I don't know if this latter observation adds anything, but I just thought I'd throw it out there. Fyi, the laptop has 2.4 Ghz CPU (Intel i7) and 16GB memory.
Any ideas? Thanks.Today when I noted that Lenovo still hadn't released an updated driver specifically for the Intel Graphics, I went back and installed a Lenovo NVIDIA Optimus update that I had tried 4 or 5 months ago but had subsequently reversed because it had created problems with Firefox. (Specifically, it was causing Firefox context menus to render slowly and incompletely.) Not only does the NVIDIA update no longer cause the FF context menu problem, it seems to have *solved* the problem I posted about here. It updated the NVIDIA driver ("GPU #2" above) from version 9.18.13.1269 to version 9.18.13.3302.
This makes some intuitive sense, since -- as I said above -- I have Optimus set to use the NVIDIA graphics with Firefox instead of Intel. (I had thought that, based on what I read in Lenovo support, the NVIDIA Optimus update might install a new Intel Graphics driver as well, but the Intel driver is still shown as the same version listed above (8.15.10.2725). (I don't know whether or not these driver numbers might be Lenovo-specific.)
Anyway, the NVIDIA Optimus update fixed my problem, so thanks for pointing me in the direction of graphics drivers. (I suppose there's also a small possibility that something had simply gone awry with my first update to FF 33, and that what really solved things was simply reinstallingl...) -
ITunes 6.0.3 crashing after upgrade from 6.0.2
The update process worked ok (message during install to close iTunes - did so then completed).
After a reboot (due to 10.4.5 update at same time) iTunes keeps crashing after about 30mins. It doesn't matter what the source is - iPod, hard-drive, copied music, purchased music.
I have submitted the report to apple and will post here when it happens again.
Anyone getting the same error?Not sure then. Might be worth trying to fix the permissions from the OSX install CD. Boot into the Cd and choose utilities-disk utility. In there is a function to check/fix permissions.
If that doesn't work, try moving your iTunes music library, then point iTunes to the new location. This should rule out any sharing issues. -
Had to start Firefox in safe mode cause it kept crashing after i deleted the file. Now Fire fox Crashes every time I open it and I have to put it in safe mode just to use it, also it's not syncing with my iPad.
If you use Norton software, try disabling your Norton extensions. As of last week, there were severe compatibility issues with Firefox 24.
-
Crashing after upgrade to 10.8.5
I read a number of notices about Mac Pro (5.1, built november 2011, model 2010) crashing after waking from sleep after upgrading from 10.8.4 to 10.8.5. My Mac Pro crashes after starting up (just after the Apple appears). I then get something that looks like a kernel panic (but the text is gone before I can fully read it). I have tried to do a full re-install and I have tried to start up in Safe Mode (after the full re-install). I have done the same on two other disks (the first disk is an SSD, the second an internal hard disk, the third an external hard disk). In all cases the machine crashes at start up. I have had to downgrade to 10.8.4 to be able to work again.
In one discussion it was suggested to find 'eltima'. I never had the app installed and there is no file (using 'Easyfind) that contains the name.
Any other suggestions, please?If you don't already have a current backup, back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. -
My Aperture crash after upgrade to 3.4. Pls help !
My Aperture crash after upgrade to 3.4. Pls help!
Removing the plist "fixed" my problems too.
Any idea what specifically in the plist is causing the problem?
That depends. I have not seen your crash log.
The problem is, that the current Aperture installer is buggy. Depending on the Aperture version you are upgrading from, some frameworks may not be installed correctly. The installer erraniously assumes they are already installed. That is why the suggested fix is to reinstall from an early version, so the installer is forced to install everything new.
Your plist contains your webaccounts, recent files, the layout of the Gui. If one of these settings prompts Aperture to use ine of the missing frameworks, it will crash. For most people here it is the Facebook setting. Removing the preferences makes Aperture forget that you have a Facebook account. If you add that account again, Aperture probably will crash again.
Reagrds
Léonie -
Curve crashes after upgrade to OS 4.5.0.81
Curve crashes after upgrade to OS 4.5.0.81
Ever since I upgraded to the T-Mobile handheld OS 4.5.0.81, my Curve crashes several times a day down to a black screen. I can't power back up on battery -- I have to plug in to an AC source, then power back up.
Hourglass remains on for quite some time to boot up, then I get a message about verifying security settings.
Curve usually crashes when I'm on a call, although now it seems to be happening when I'm using any of the phone setting menus.
I've already tried 1) freeing up memory on the SIM card by deleting pictures 2) doing a clean install of the handheld software using Desktop Manager.
It's still crashing. My BlackBerry is two months out of warranty (of course!). T-Mobile says I have to buy a new phone. I think it's a software issue (I've used the phone with no problems between 3/1/2008 and 4/4/2009).
Any help/insight would be appreciated.
Message Edited by wrdywmn on 05-11-2009 07:34 PM
Solved!
Go to Solution.Below there is an excerpt from page to link I provided above:
What If I Want To Downgrade?
Forum member 'bfrye' made a good guide: Here is a quick install guide to your blackberry. This should easily cover reinstallation of OS and reverting back to previous OS version as well.
1. Download the version of OS you want to install from your carrier's website.
2. Extract or install the files from the previous step. They will automatically install into the correct location. This location will be C:\Program Files\Common Files\Research in Motion\Shared\Loader Files. Under this directory you will see directories with the model number of your device (if you installed the correct files) followed by a version number. Under these directories will be a host of .alx and .cod files. Do not modify or delete these files. They are needed to install the new OS.
3. Assume the BlackBerry Handheld Manager is installed, when you plug your device in, a popup will appear and ask if you want to upgrade your device. Choose upgrade and follow the steps given by the Application Loader. If you have any 3rd party applications you would like to keep, locate and select them at this time to avoid having to reload them after the new OS is installed.
4. This will also be the time the apploader will ask if you want to erase all data and reload or backup and restore the data on your device. Choose your preference and continue.
5. Typically a complete OS reload with backup and restore can take anywhere from 5-15 minutes depending on the amount of data on your device to restore.
6. The apploader will inform you when the process is complete. After this, the device will automatically reset itself (sometime this will take longer than a normal reboot) and once completed and on, your device will be upgraded and ready to go.
Now if you wish to downgrade your device to a previous version, many of the above steps will apply.
First, you will have to remove the newer OS from your PC. Do this by going to add/remove programs in the control panel and removing the software for the new BB OS. Make sure desktop manager is not running when you do this. After complete, restart the Desktop Manager.
When you plug in your device, if everything went well, the Desktop Manager should tell you that your PC has an older version of desktop tools than is installed on the device. It will give you an option to keep the version on your BlackBerry or downgrade to the version on your PC. You will want to select downgrade and let apploader do the work.
Should this method fail, you will have to download the file javaloader.exe from the internet. Place it in a common directory (I usually put mine in the Loader Files directory for easy access. From the directory you have javaloader.exe installed in type "javaloader -usb wipe". This will completely erase all data and applications from your devie. Now navigate to C:\Program Files\Common Files\Research in Motion\AppLoader and delete the file vendor.xml. Now plug in your device and install the new OS from scratch. Open apploader and select the USB port as your connection. It will then bring to you to the main apploader screen and all the OS packages will be listed with status as Install.
If you have question beyond the scope of this document please feel free to post them. However I suggest reading and rereading these steps to ensure you have tried the most basic and tried steps to load or reload your OS. Have fun and enjoy!
Have you done all steps described ?
if your issue solved set "Solution" mark at the relevant post -
Macbook pro 2010 crashes after waking from sleep
Hi,
I upgraded to mountain lion a month or so ago and ever since my MBP often crashes after waking from sleep. I've included the error report below. Any help would be appreciated. After it restarts, it works fine. Problem consistently happens after waking from sleep.
Thank-you
Interval Since Last Panic Report: 55755 sec
Panics Since Last Report: 1
Anonymous UUID: D0E51DBB-BAAC-864E-AF93-8DAF5E934CE9
Sun Dec 2 08:24:22 2012
panic(cpu 0 caller 0xffffff7f8aabdb25): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811e05d000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address
0xffffff80fa7bb420 : 0xffffff800a21d626
0xffffff80fa7bb490 : 0xffffff7f8aabdb25
0xffffff80fa7bb520 : 0xffffff7f8abb74b3
0xffffff80fa7bb580 : 0xffffff7f8abb7527
0xffffff80fa7bb5f0 : 0xffffff7f8aecc853
0xffffff80fa7bb730 : 0xffffff7f8abdd659
0xffffff80fa7bb760 : 0xffffff7f8aac78da
0xffffff80fa7bb810 : 0xffffff7f8aac2fac
0xffffff80fa7bba00 : 0xffffff7f8aac43a2
0xffffff80fa7bbad0 : 0xffffff7f8acb815a
0xffffff80fa7bbb00 : 0xffffff7f8ac9be1a
0xffffff80fa7bbb30 : 0xffffff7f8ac9b241
0xffffff80fa7bbba0 : 0xffffff7f8ac9b362
0xffffff80fa7bbc20 : 0xffffff7f8aca687d
0xffffff80fa7bbc50 : 0xffffff7f8acae61c
0xffffff80fa7bbdd0 : 0xffffff7f8aa5a3c7
0xffffff80fa7bbe40 : 0xffffff7f8aa4457b
0xffffff80fa7bbeb0 : 0xffffff7f8aa46c04
0xffffff80fa7bbf00 : 0xffffff7f8aa0839f
0xffffff80fa7bbf20 : 0xffffff800a649e4a
0xffffff80fa7bbf60 : 0xffffff800a23dcde
0xffffff80fa7bbfb0 : 0xffffff800a2b26b7
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8a9ff000->0xffffff7f8aa36fff
dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8aa42000->0xffffff7f8aa53fff
dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8a9ff000
dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
com.apple.NVDAResman(8.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f8aa56 000->0xffffff7f8ad58fff
dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8aa42000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8a9ff000
com.apple.nvidia.nv50hal(8.0)[9F3D09B5-3158-3D9E-BDA3-E71576AAD3B7]@0xffffff7f8 ad66000->0xffffff7f8b088fff
dependency: com.apple.NVDAResman(8.0.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f8aa 56000
dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000000a000000
Kernel text base: 0xffffff800a200000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 50092647901403
last loaded kext at 48562451601465: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f8c5c0000, size 16384)
last unloaded kext at 48645674911297: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f8c5c0000, size 12288)
loaded kexts:
com.razer.orochi.driver 2.0
com.rim.driver.BlackBerryUSBDriverInt 0.0.74
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleHDA 2.3.1f2
com.apple.GeForce 8.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleIntelHDGraphics 8.0.0
com.apple.driver.AppleIntelHDGraphicsFB 8.0.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.driver.AppleMuxControl 3.2.11
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 165.5
com.apple.driver.IOBluetoothHIDDriver 4.0.9f33
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.kext.triggers 1.0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.driver.AppleKeyStore 28.21
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOStorageFamily 1.8
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Razer Orochi, 0x1532, 0x0013, 0xfa140000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 9
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3Back up all data, then uninstall the Razer and Blackberry software according to the developers' instructions. Reboot and test. Most likely there will be no change. In that case, see below:
MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video -
My Mountain Lion mac crashes after resuming from sleep
Hello
My Mountain Lion mac crashes after resuming from sleep every time I use it
It happens every time the mac resumes from sleep and it started like a week ago
I remember installing the new updates for flash? and xquartz and nothing else.
I have also had microsoft word installed on my mac for about 1 weeks before this problem started so might be related to that
Please share with me any tips on how to fix this because I am really annoyed of losing stuff after each time my mac resumes from sleepI have an iMac bought may -11, and it worked fine with Snow Leopard.
About a week ago I bought and installed Mountain Lion 10.8.2. Everything went fine, and all software worked ok. iPhoto had some problems, but after installing update the system prompted to do, it has worked ok.
The propblem occurs now and then, when computer is waked up from sleep. The Desktop occurs, but no software starts, not even System Tools untlil rebooting the computer. Of course, I can not reboot the computer from "Apple menu", but holding the power button down.
This is very embarassing! OsX Mountain Lion has turned out to be a very big disappointment. I installed id because of iCloud (i have a new iPad, too with iOs 6 installed).
Can anyone help me? Is there any other way to solve the problem than re-installing good old Snow Leopard?
I would not like to do that, I bought Mac because I was bored in re-installing and recovering!
Thank you -
5 crashes after upgrade to ios my address book immediately and I can not access emails, because the password is wrong and when I go to mail settings crashes the application immediately from
Same issue also. Occurring both on my iPad 2 and iPhone 4 after upgrading to ios 5
By the way, Mattban and Sancasslano, are either of you also experiencing any of the following issues:
* Problems with Contacts either crashing or listing no names
* Problems with turning iCloud on or off for application under Settings->iCloud... On both mine I just get a pop up saying that iCloud is being turned off but Contacts then just locks up.
* General problems when trying to synch applications on the iPad or iPhone over iCloud?
I am wondering if all these issues are in someway related to and whether it is worth trying to turn off iCloud somehow, though I cannot work out how this can be done once set up. -
IPad Air crashes after upgrade to IOS8.02
ipad air is crashing after upgrade to IOS 8.02. The apps crash leads to restarting of the iPad. Is this a software issue or hardware?
the apps that I use are Facebook,you Tube, chrome and LinkedIn.Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings -
AW crashes after upgrade to OSX
AW crashes after upgrading to OS10.4.4.
I have never, in many years, had it fail to open prior to this.
I don't know if this is a coincident or not, but it will not open at all.
It begins the process then stops and gives this message:
.... The application Appleworks quit unexpectedly.
I restarted the system a couple of times but that did not help.
I believe it fails during font installation.
Maybe a font is incompatible with the new OS. ...but which one??
HaroldAfter updating AppleWorks 6 or OS X, it is necessary to delete the AppleWorks preferences. See my user tip, AppleWorks has stopped working correctly, for more information.
Even though it does appear that you may have a corrupt font, do the preference thing first. It is likely that the font was added with the system upgrade or you have a duplicate font. First, look for a font named Bauhaus 93. This font is installed by versions of Microsoft Office before Office 2004. The Bauhaus 93 with Office 2004 is not corrupt. If you don't find Bauhaus 93, before going through the trial & error of locating a corrupt font, use FontBook to check for duplicate fonts.
The trial & error method of corrupt font isolation involves moving all of the fonts from the various font folders to another folder (the Desktop is a good place) & then moving a few back at a time & trying to launch AppleWorks. When it crashes you will know the culprit is in the last bunch.
Peggy -
Mail Crashes After Upgrade to Leopard
After upgrading from Tiger to Leopard I have found that Mail crashes every time I start up. For a start I need to select New Viewer Window to even see the application. When I do, I can see my old message folders but there is no content in them and although all of the account settings are correct, it won't download email. Then it won't let me quit unless I force quit. The problem persists after restarting.
I do have my mail backed up but Mail isn't working at all.
Please help!Try this, make sure Mail is quit first of all.
1. Go into your users library (Macintosh HD/Users/username/Library).
2. In here you should have a folder called Mail, drag this folder to your desktop.
3. Now open mail, it will give you a window saying you have opened mail for the first time. DO NOT click continue (yet), leave this window open for now in the background.
4. Go back to the users Library Folder (Macintosh HD/Users/username/Library) where you just dragged the Mail folder from. It should now have created a new mail folder. Rename this NEW mail folder something like 'mailold'.
5. Once the new Mail folder has been renamed drag the Mail folder which is on the desktop (the one moved in step 2) back into the user Library folder. Now click continue on the Mail application window (step 3) and hopefully it will re-import as it was before.
I would backup your Users folder before you attempt any of the above steps just in case. -
Various programs crash after upgrade to 10.6.4
Various programs crash after upgrade to 10.6.4 but only late in the day / evening. There seem to be no crashes early in the day.
After a reboot the problem is fixed and things seem to work OK.
Might this be some kind of memory-related issues?? Programs not releasing memory until eventually there's nothing left?
I'm a Windows guy until recently so am not up to speed with Mac software / hardware yet.
Any suggestions?
Thanks.Hi, I am facing major instability in MS Office for Mac 2008 after the 10.6.4 upgrade. Programs (Word, Excel, PowerPoint), just crash randomly. Mostly when opening existing Office documents but there is no fixed pattern.
Tried Office auto update but no joy.
Any suggestions
Here is the MS Error log
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXCBADACCESS
Date/Time: 2010-07-23 20:37:36 +0530
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 12.2.5.100505
Crashed Module Name: libTrueTypeScaler.dylib
Crashed Module Version: unknown
Crashed Module Offset: 0x00009bd5
Blame Module Name: libTrueTypeScaler.dylib
Blame Module Version: unknown
Blame Module Offset: 0x00009bd5
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Operating System Information
Operating System: Mac OS X 10.6.4 (Build 10F569)
CPU: Intel Core Duo, Number: 2, Speed: 2147 MHz
gestaltPhysicalRAMSize err = 0, result = 2047 MB
gestaltSystemVersion err = 0, result = 0x1064
Screen: 1440 x 900, depth = 32, ltbr = 0, 0, 900, 1440
Microsoft Application Information:
Error Reporting UUID: 0B338D65-7DAA-4B4A-B8B1-0C17F587C24A
Time from launch: 0 hours, 14 minutes, 46 seconds
Total errors on this client: 40
Does this help at all ? -
Many of my Apps are now crashing after upgrading my iPad 1 to OS 5. What's up?
Many of my Apps are now crashing after upgrading my iPad 1 to OS 5. What's up?
Free memory. You are probably getting crashes becasue you have too much stuff floating sround in memory. Double tap the home button to see the task bar. Touch and hold any of those icons until they jiggle, then delete them all by touching the minus sign.
Do this every day, or more oftern if needed to keep the system freed up. If you are using safari a lot, make sure to fully close some of the windows by touch the x on the tabs. Each window uses some active memory.
From time to time, do a full reboot by holding the sleep and home button until the apple logo appears. Ignore the red slider. This also frees up some system resources.
The iOS system is supposed to do this for you, but since the intro of ios 5 there are a fair number of folks crashing.
Maybe you are looking for
-
Interactive Report: how can I display carriage returns?
Hello everybody. Here is my problem: I created a table containing a field COMMENT varchar2(4000) and using APEX 4.1 I built an interactive report on it. Users can fill the field COMMENT with sentences on different rows, ex: " this is the first line t
-
What is the purpose of Additional Group Base in the settings of AD plugin
Hi everybody, We have some trouble when searching for NTFS files. (10.1.8.1. Windows 2003) The involved user is authorized by a group in Active Directory to view the files but OSES can'nt find any. The user, who crawled the source, works fine when se
-
My requirement is to develop an application which monitors all application servers (E.G. database servers, websphere etc) . What i did is ::: For each application server, there is a socket created and if it fails to connect to the respective applicat
-
Transaction to check Transport Request error
Hi, I raised a transport request in R/3 to transport data sources. My basis team informed to check the imported request in QA as it is imported with error. which transactions do i need to check for that Thanks
-
This is strange according to the diagram from the SPRO IMG ( as per the attached screen shot) Maintain FM Area T-Code = OF01 ( as per the attached screen shot) But that T-Code navigates to Change View "Financial Management Area" Is this an SAP Def