All VM's on hyper-v fail to start with ' guest could not initialize'

This afternoon I tried to startup a VM and got the message '<guest> could not initialize'. I checked some other VM's, the same message. I had a VM running, stopped that one and tried to start it again, the same message: 'could not initialize'.
I checked the bios, all settings are correct.
I uninstalled (turned off) the hyper-v feature, rebooted the machine twice, checked with CPU-Z to see if VT-X was enabled; it was.
Turned hyper-v on again, rebooted. And I still have the same error message....
I have seen this error on the forum, but sofar I have not found an answer.
Regards,
Rolf Koolma
My system:
Microsoft Windows Enterprise (MSDN version) on an AMD Phenom II X6 1090T

Hi Rolf,
How about the current situation? Did you confirm your consideration?
Please note to backup your registry before doing any changes on registry.
And then I also would like to suggest you read this blog that is aiming at this kind of issue:
Hyper-V Could Not Initialize - Could Not Create or Access Saved State File
http://blogs.technet.com/b/rmilne/archive/2014/01/15/hyper-v-could-not-initialize-could-not-create-or-access-saved-state-file.aspx
Karen Hu
TechNet Community Support

Similar Messages

  • Failed to start message bus: Could not get UID and GID for username "d

    Today ive updated my system and got this mesage on boot
    Failed to start message bus: Could not get UID and GID for username "dbus"
    My keyboard doesnt work..not on usb or ps2.
    After 2 years over using arch on stable repo i got this very ugly bug...S***
    ill use minimal cd to reinstall core...it seems i cant get on tty working

    phoenix, don't post in old threads: http://wiki.archlinux.org/index.php/For … Bumping.27
    Try reinstalling dbus-core - if that doesn't work, start a new thread.
    Closed.

  • When attempting a sync with my iPod Touch gen 5 I get this error "The iPod "****" could not be synced because the sync session failed to start."  I could not find the backup file to delete per researched support recommendation.  I have synced this iPod.

    "....could not be synced because the sync session failed to start."  I have synced this iPod with this MacBook Air about 6 weeks ago.  Now it won't sync.  A possible solution is to delete the backup file located in Mac:~/Library/Application Support/MobileSync/Backup/  However, I don't have a "MobileSync" folder in my Application Support folder.  Please help.

      Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    Also:
    https://discussions.apple.com/thread/3415227?start=0&tstart=0
    https://discussions.apple.com/message/16400530#16400530

  • Opmnctl fails to start with error:  "Main: Nls Initialization Failed!!"

    Hi. Just thought I would add this here since someone else will probably hit this error when attempting to start opmnctl: "Main: Nls Initialization Failed!!" when using 10g App Server on Windows.
    There is a known workaround, which is to avoid libociei.so, but I don't have that object on windows, so I found that I have some conflict with other installed programs on this server. I removed them from the path, even the end of the path, opened a new command window, then, opmn started with no problem.
    Probably not a long term solution, but if you are working on a dev server, like I am, you probably have a bunch of stuff installed that is no longer used ;)
    Hope this helps someone,
    Robin

    Actually, I would first check on metalink to see if there is anything that can help with this error message. I resolved it by cleaning up the environment, but you probably need to keep your existing environment the way it is, since you have already installed.
    Sorry--I didn't read through your question very well the first time.
    --robin                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • HT1199 I updated Itunes on my PC and now when i try to open Itunes i get a error message saying "application failed to start because MSVCR80 was not found" then whenI close that pop up I get a error message saying "windows was not installed correctly Erro

    I updated my itunes the other day and now it won't open I get error message saying "application failed to start because MSVCR80 was not found"  When I close that window I get message stating Itunes was not installed correctly Error 7 Windows error 126.  My PC is a Acer and I'm running Windows Visa.  I tried to uninstall Itunes and reinstall it and get same message.  Can anyone help.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99659)

  • Sync session failed to start with itunes and iphone 5

    sync session failed to start with itunes and iphone 5

    Restart your computer
    While your computer is restarting, clear all of the applications from the background on your iPhone. You can do this by pushing the home button twice and swiping the programs off the screen by pushing them upwards.
    After you are done doing that, restart your phone.
    Wait about 10 seconds or so and turn your phone back on. By the time you get your phone back on your computer should be completly restarted and ready to go.
    When your phone is back on, plug it into your computer. This should automatically bring up your Itunes, you may get another pop up that says autoplay, you can close that out. That's it. I hope it helps and good luck

  • System synchronization failed--Protocol Error: Handheld file could not be opened. (4004)

    I have reviewed Palm Support Page and the forums and recognize this is an old story but the solutions offered haven't worked for me.  I have had my Tungsten 2E for over a year and an earlier version before that.  It has been working well for me until I had a problem (out of the blue) with the HotSync.  I reinstalled the Palm software after checking cables, etc.  I was able to relink and get updated info from my handheld to the desktop but with a few blips in DocstoGo where I had to delete documents and add them back to the desktop and resync with the handheld.  All the info is on the handheld but see the log below to see the message "System synchronization failed".  A suggestion by other users is to delete the "PmTraceDatabase" to file C:\Program Files\Palm\N\Backup\PmTraceDatabase.PDB but I cannot find the named file on my desktop program files for Palm. 
    Does anyone have an explanation other than "live with it" since I believe I'm getting all my info synced?
    HotSync operation started 02/14/08 09:26:07
    OK Calendar
    OK Contacts
    OK Tasks
    OK Memos
    OK Expense
    OK Note Pad
    OK Documents To Go
    OK Photos
       - Installed file: C:\Program Files\Palm\N\Install\DocsToGo.prc
       - Installed file: C:\Program Files\Palm\N\Install\GraphicsLibrary.prc
       - Installed file: C:\Program Files\Palm\N\Install\SheetToGo.prc
       - Installed file: C:\Program Files\Palm\N\Install\SS_P2P.prc
       - Installed file: C:\Program Files\Palm\N\Install\WordToGo.prc
       - Installed file: C:\Program Files\Palm\N\Install\WP_P2P.prc
       - Installed file: C:\Program Files\Palm\N\Install\WTGFontPackage.pdb
    OK Install
       -- Backing up db psysLaunchDB to file C:\Program Files\Palm\N\Backup\psysLaunchDB.PDB
       -- Backing up db PmTraceDatabase to file C:\Program Files\Palm\N\Backup\PmTraceDatabase.PDB
    System synchronization failed
    Protocol Error: Handheld file could not be opened.  (4004)
    HotSync operation complete 02/14/08 09:26:47
    Post relates to: Tungsten T2
    This question was solved.
    View Solution.

    1. download and install FileZ from here
    http://nosleepsoftware.sourceforge.net/index.php?page=filez
    2. Launch FileZ and tap on view and edit files
    3. Open the internal folder and tap pmtracedatabase and put a check mark next to it
    4. Tap details
    5. Tap on the "Attrs" tab
    6. Uncheck the box next to backup
    7. Click Save
    8. Sync

  • AutoVue20.2 - 2DPro - Initialization failed. Could not initialize socket

    Hi,
    We are running a standard install of AutoVue 20.2 2DPro. We have the situation of the JVueAX.ocx activeX being coded in VB.Net.
    When we run the custom application as an admin user there is no issue, however when there is a restriction placed on the users (ie non-admin restricted to read & write on most things) we get the following issue in a popup messagebox.
    Error
    Initialization failed. Could not initialize socket on localhost:5099
    nested exception is:
    java.net.ConnectException: Connection refused: connect
    at java.net.PlainSocketlmpl.socketconnect(Native Method)
    at java,net.PlainSocketlmpl,doConnect(Unknown Source)
    at java.net.PlainSocketlmpl.connectToAddress(Unknown Source)
    at java.net.PlainSocketlmpl,connect(Unknown Source)
    at java,net.SocksSocketlmpl,connect(Unknown Source)
    at java.net.Socket.connect(Unknown Source)
    at java.net.Socket.connect(Unknown Source)
    at java.net.Socket.<init> (Unknown Source)
    at java.net.Socket.<init>(Unknown Source)
    at com.cimmetiy.vueconnection.g.a(Unknown Source)
    at com.cimmetiy.vueconnection.g.<init> (Unknown Source)
    at com.cimmetry.vueconnection.ServerControl.a(Unknown Source)
    at com.cimmetry.vueconnection.ServerControl.connect(Unknown Source)
    at com,cimmetry.vueframe,VueFrame.h(Unknown Source)
    at com,cimmetry.vueframe.VueFrame.<init>(Unknown Source)
    at com.cimmetry.jvue.JVue.b(Unknown Source)
    at com.cimmetiy.jvue.JVue.a(Unknown Source)
    at com.cimmetry.jvue.JVue$a.run(Unknown Source)
    at java,awt.event.InvocationEvent.dispatch(Unknown Source)
    at java.awt.Event.Queue.dispatchEventImpl(Unknown Source)
    at java.awt.Event.Queue.access$000(Unknown Source)
    at java.awt.Event.Queue$l.run(Unknown Source)
    at java.awt.Event.Queue$l.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.security.AccessControlContext$l.dolntersectionPrivilege(Unknown Source)
    at java.awt.EventQueue.dispatchEvent(Unknown Source)
    at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.run(Unknown Source)
    An error occurred while connecting to the server.
    Restart the applet?
    So it appears to be a permissions issue.
    We have changed the security settings on the Autovue folder but that doesn't alter the outcome.
    We have looked for more debug and altered the Log4j.xml to be all DEBUG but that didn't increase the output.
    The install log is 3007 of successful and no warnings or failed components.
    So we now ask for your input. What port needs opening or what file/folder needs the modify or full control assigned? Or is there a manual we may have misread?
    Any pointers would be appreciated.
    I have reviewed the AutoVue Desktop Deployment post.
    Cheers,

    The fix for this is to copy a file called Config.properties into the %userprofile%\AutoVue\Offline_Files
    for each user.
    In the text file Config.properties are these lines.
    #Offline Files Configuration
    [WORK OFFLINE]
    INSTALLDIR=C:\Oracle\AutoVue Desktop Deployment
    ISOFFLINE=1
    INSTALLVER=20.2.0.0
    Edited on 24-Oct-2012 14:51

  • This just came up : Failed to start MSVCR80.dll was not found. I tried re-installing it a few times and same thing.

    This just came up : Failed to start MSVCR80.dll was not found. I tried re-installing it a few times and same thing.

     
    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99601)

  • Adalnctl failed to start with status 127

    OS:red hat as4
    ebs: 11.5.9
    now my system can be started,but the adalnctl failed to start with status 127.
    the error message is about lsnrctl which saied that lsnrctl: command not found.
    but when i start the lsnrctl with oracle owner,the lsnrctl was started immediately.
    however,i found that,the lsnrctl was conected to the port 1521,the adalnctl to the port 1626.
    please help me to see it!
    the cdalnctl log was this:
    LSNRCTL for Linux: Version 9.2.0.3.0 - Production on 20-MAY-2009 17:03:27
    Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=ebstest)(Port=1626))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Linux Error: 111: Connection refused
    Starting listener process APPS_PROD.
    LSNRCTL for Linux: Version 9.2.0.3.0 - Production on 20-MAY-2009 17:03:27
    Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
    Starting /u01/oradata/prodora/8.0.6/bin/tnslsnr: please wait...
    TNS-12545: Connect failed because target host or object does not exist
    TNS-12560: TNS:protocol adapter error
    TNS-00515: Connect failed because target host or object does not exist
    Linux Error: 2: No such file or directory
    adalnctl.sh: exiting with status 1
    Checking status for listener process APPS_PROD.
    adalnctl.sh: exiting with status 1
    ./adalnctl.sh: line 126: lsnrctl: command not found
    Starting listener process APPS_PROD.
    ./adalnctl.sh: line 137: lsnrctl: command not found
    adalnctl.sh: exiting with status 127
    Checking status for listener process APPS_PROD.
    adalnctl.sh: exiting with status 1

    oh maybe i found it
    i have more than one listener.ora
    [root@ebstest /]# find -name listener.ora
    ./u01/oradata/prodora/iAS/hs/admin/listener.ora
    ./u01/oradata/prodora/iAS/network/admin/samples/listener.ora
    ./u01/oradata/prodora/8.0.6/network/admin/samples/listener.ora
    ./u01/oradata/prodora/8.0.6/network/admin/PROD_ebstest/listener.ora
    ./u01/oradata/proddb/9.2.0/network/admin/samples/listener.ora
    ./u01/oradata/proddb/9.2.0/network/admin/PROD_ebstest/listener.ora
    ./u01/oradata/proddb/9.2.0/appsutil/out/PROD_ebstest/01010106/listener.ora
    ./u01/oradata/proddb/9.2.0/appsutil/out/PROD_ebstest/01010108/listener.ora
    ./u01/oradata/proddb/9.2.0/appsutil/out/PROD_ebstest/01010121/listener.ora
    and the other listener.ora was about port 1626
    [root@ebstest /]# cat ./u01/oradata/prodora/8.0.6/network/admin/PROD_ebstest/listener.ora
    # $Header: admk80ln_ux.sql 115.13 2003/04/03 08:05:06 skghosh noship $
    # LISTENER.ORA For Oracle Applications
    # This file is automatically generated
    APPS_PROD =
    (ADDRESS_LIST =
    (ADDRESS= (PROTOCOL= TCP)(Host= ebstest)(Port= 1626))
    SID_LIST_APPS_PROD =
    (SID_LIST =
    ( SID_DESC = ( SID_NAME = FNDSM_PROD )
    ( ORACLE_HOME = /u01/oradata/prodora/8.0.6 )
    ( PROGRAM = /u01/oradata/prodappl/fnd/11.5.0/bin/FNDSM )
    ( envs='MYAPPSORA=/u01/oradata/prodappl/APPSPROD_ebstest.env,PATH=/usr/bin:/usr/ccs/bin:/bin,FNDSM_SCRIPT=/u01/oradata/prodcomn/admin/scripts/PROD_ebstest/gsmstart.sh' )
    ( SID_DESC = ( SID_NAME = FNDFS )
    ( ORACLE_HOME = /u01/oradata/prodora/8.0.6 )
    ( PROGRAM = /u01/oradata/prodappl/fnd/11.5.0/bin/FNDFS )
    ( envs='EPC_DISABLED=TRUE,NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1,LD_LIBRARY_PATH=/usr/dt/lib:/usr/openwin/lib:/u01/oradata/prodora/8.0.6/lib,SHLIB_PATH=/usr/lib:/usr/dt/lib:/usr/openwin/lib:/u01/oradata/prodora/8.0.6/lib,LIBPATH=/usr/dt/lib:/usr/openwin/lib:/u01/oradata/prodora/8.0.6/lib,APPLFSTT=PROD,APPLFSWD=/u01/oradata/prodappl/admin' )
    STARTUP_WAIT_TIME_APPS_PROD = 0
    CONNECT_TIMEOUT_APPS_PROD = 10
    TRACE_LEVEL_APPS_PROD = OFF
    LOG_DIRECTORY_APPS_PROD = /u01/oradata/prodora/8.0.6/network/admin
    LOG_FILE_APPS_PROD = APPS_PROD
    TRACE_DIRECTORY_APPS_PROD = /u01/oradata/prodora/8.0.6/network/admin
    TRACE_FILE_APPS_PROD = APPS_PROD

  • Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035

    I'm getting the following error:
    Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
    Source: Microsoft-Windows-Kernel-EventTracing
    Date: 5/17/2010 11:04:48 AM
    Event ID: 2
    Task Category: Session
    Level: Error
    Keywords: Session
    User: ****
    Computer: ****
    Description:
    Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
    <EventID>2</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>2</Task>
    <Opcode>12</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2010-05-17T18:04:48.898886000Z" />
    <EventRecordID>45</EventRecordID>
    <Correlation />
    <Execution ProcessID="4816" ThreadID="2800" />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>****</Computer>
    <Security UserID="****" />
    </System>
    <EventData>
    <Data Name="SessionName">WbadminInBuiltTracing</Data>
    <Data Name="FileName">
    </Data>
    <Data Name="ErrorCode">3221225525</Data>
    <Data Name="LoggingMode">2</Data>
    </EventData>
    </Event>
    Does anyone know what this is or how to prevent it from
    occurring?
    I'm running Windows Server 2008 R2.
    Thanks much,
    James

    Not according to my computer - (actually its at least 4 years now) which among so many other errors have haunted me from the day I bought it and took it home. I've spent literally a year of time out of the 5 I've had this laptop which btw is a home computer,
    not a small business pc - searching, trying fixes that didn't work, searching more trying fixes that worked only to have the same scenario begin again 2-3 months down the road OR new ones pop up - which starts the process all over again. I'm now getting BSOD's
    about once every 2-3 days with no reason in the event viewer.
    And I continue to work on all the errors, warnings and critical errors with no results. I just wish Microsoft would fix these issues instead of developing new OS's that not only carry these problems over but add new ones to each new OS. Don't misunderstand
    me. I like Windows, in fact I'm one of the very few graphic artists out there that prefer it over a MAC but its quite disheartening to be continually working on these issues to say the least.
    Of course, it's just my opinion....I could be wrong!

  • Error event id 2 - Kernel Event Tracing - Session "" failed to start with the following error: 0xC000000D

    I keep getting this strange error logged as Error event id 2. Note session string is blank "". Any ideas?
    Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
    Source:        Microsoft-Windows-Kernel-EventTracing
    Date:          24/12/2009 09:08:20
    Event ID:      2
    Task Category: Session
    Level:         Error
    Keywords:      Session
    User:          SYSTEM
    Computer:      George-XXL
    Description:
    Session "" failed to start with the following error: 0xC000000D
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
        <EventID>2</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>2</Task>
        <Opcode>12</Opcode>
        <Keywords>0x8000000000000010</Keywords>
        <TimeCreated SystemTime="2009-12-24T09:08:20.835299100Z" />
        <EventRecordID>36</EventRecordID>
        <Correlation />
        <Execution ProcessID="1944" ThreadID="1948" />
        <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
        <Computer>George-XXL</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="SessionName">
        </Data>
        <Data Name="FileName">
        </Data>
        <Data Name="ErrorCode">3221225485</Data>
        <Data Name="LoggingMode">5</Data>
      </EventData>
    </Event>

    Can you let us know if you get any Blue Screen crush error while using your comptuer?
    Generally we can safely ignore the errors in the Event log. Aas we don't if you have get other issues in your computer, you can test your computer in the Clean Boot mode. This method will help us determine if this issue is caused by a loading program or service.
    You can try the the following steps:
    1. Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
    2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
    3. Click the "Startup" tab, click "Disable All" and click "OK".
    Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
    Please test this issue in this Clean Boot environment, if the issue disappears in the Clean Boot environment, you can use the dichtomy to quickly narrow down which entry is causing the issue. You can refer to the
    KB929135.
    Good luck!
    John
    This is a very poor answer.  This guy doesn't know what he's talking about because if you tell someone its ok to  "safely ignore the errors in the event log"  as a blanket instruction ESPECIALLY because as he stated so himself
    he didn't know if there were other issues with the OP's pc then he's giving really bad advice. If you ignore errors in the event log then over time your system will degrade and you will have other issues.. Every error on your pc should NOT be ignored.
    It should be decided on a case by case situation.
    Furthermore this is an error involving the Windows Session which it states has failed. Definitely should NOT be ignored.
    I've got the same error which has suddenly just showed up. No BSOD, Do not have WHS installed and all my media center connectors have NEVER been connected. I don't believe this is a service issue. I think it has something
    to do with kernel event tracing.
    Of course, it's just my opinion....I could be wrong!

  • DRM Process Manager failed to start with error Timeout starting the following process: NetJNIBridge.

    When we Start the DRM  DRM Process Manager failed to start with following error
    [Process ID: 3948, Thread ID: 1, Process Manager]
    Error loading the NetJNIBridge host process on machine: EU9SC1WNW001
    System.Exception: Error loading the NetJNIBridge host process on machine: EU9SC1WNW001 ---> Oracle.Drm.Exceptions.ResourcedException`1[Oracle.Drm.Messages.MsgsProcessManager]: DRM-61028: The following unexpected error occurred communicating with URL 'EU9SC1WNW001': DRM-61023: Timeout starting the following process: NetJNIBridge. DRM Process ID: b3e602fa-f6c1-abcc-4af7-c0a99b51b235
       at Oracle.Drm.ProcessManager.Program.ServiceMethod(String machineName, UInt16 port, Action`1 action)
       at Oracle.Drm.ProcessManager.Program.StartNonEngineProcesses()
    After 11.1.2.3 DRM upgrade

    OS:linux
    i am getting error in installing OPMN manually
    when trying to installing OPMN manually getting error i.e,
    opmnctl: starting opmn and all managed processes...
    opmnctl: opmn start failed
    when checked opmn/logs:
    opmn.log is empty
    ons.log showing error ie:
    13/06/17 19:22:45 [4] ONS server initiated
    13/06/17 19:22:45 [2] 10.209.178.16:6200 - thread create failed
    ipm.log shoeing error i.e:
    13/06/18 11:58:04 [4] OPMN server ready.  Request handling enabled.
    13/06/18 11:58:16 [4] PM state directory exists: /u02/app/orapp/product/10.1.2/opmn/logs/states
    13/06/18 11:58:16 [4] PM state file does not exist: /u02/app/orapp/product/10.1. 2/opmn/logs/states/.opmndat
    any idea why it is showing error??

  • Disk Utility: "Repairing disk failed with error Could not unmount disk"

    Disk Utility: “Repairing disk failed with error Could not unmount disk”
    Hi. I’ve been experiencing some mildly squirrelly behaviour with my system (vide infra) so decided to repair the two internal hard drives on my computer. The primary hard drive is a 74.53 GB ST380013AS that came with the system; its S.M.A.R.T. Status is “verified” and Disk Utility repairs permissions just fine. However, the second internal drive (Maxtor 6L250S0, 233.76 GB, lower Bay, Journaled HFS+), despite being verified by S.M.A.R.T. status and apparently running OK, fails to unmount when I ask Disk Utility to repair it- I get the above error message in red. I have repaired this disk with DiskWarrior (v3.03) and all appears to run AOK. Can anyone tell me why I cannot get Disk Utility to run on this secondary (eg, non-startup) disk? I have tried many times and the error is reproducible. Thank you!
    G5 1.6GHz PPC, 1 GB RAM, running OS 10.4.6

    Thank you for these useful links!
    For others who have this issue, I also found very helpful advice given to this question on the MacFixIt forums by MicroMat Tech3 at
    http://www.macfixitforums.com/php/showthreaded.php?Cat=&Board=tiger&Number=76265 1
    He said: "Use the lsof command to find the open files on a volume that does not unmount or eject. Open Terminal, located in /Applications/Utilities. Type: sudo lsof | grep Leave a space after the p in grep, then drag the icon of the problem volume to the Terminal window. The pathname for the volume is pasted in for you; press Return. Then enter your administrative password at the prompt, and press Return."
    At this point, one now has a list of the open files/processes on the volume that will not unmount. You can use Activity Monitor to terminate these processes if you wish, and then the volume will unmount as it should.

  • Hyper-V could not initialize (rights?)

    Hello,
    I have an WIN2012 R2 Server.
    Unfortunatley it is serving as a DC (I know this is not recommended).
    I set up the HYPER-V role and when I start I receive with a newly created VM (no etwork connected yet):
    'TEST111' could not initialize. (Virtual machine ID 49608249-F381-43E8-BCCF-F6C61CDE68A0)
    Event ID 3040
    Most likely it has something to do with the rights. I tried to apply this thread, but no luck:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/ae8a90a2-4251-4fbd-b644-72dcd4b5f08c/error-an-attempt-to-initialize-vm-saved-state-failed-when-starting-any-vm?forum=winserverhyperv
    I reinstalled the role and it still does not work. It looks like the old Settings of the hyper-v program stay on the machine after deinstalling the role, because after the reboots and Setting it up again it Shows the old Settings.
    The process Monitor Shows:
    HKCR\Applications\vmconnect.exe : NAME NOT FOUND Desired Access: Read.
    Q:
    Is there a way to completly clean the hyper-v stuff?
    It might be that hyper-v only accepts local admin users (especially on a DC)?

    Hi,
    The not recommend setting up often cause complex issue and hardly to locate the problem point when you troubleshooting, I don’t have the same environment but after you install
    the Hyper-V role, the Hyper-V Administrators local group will created automatically, Please confirm your current user is the member of the Hyper-V administrators group user.
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for