All websites automatically going to Mobile versions when using safari and firefox (likely started after mavericks update) Anyone have any idea how to fix this?
Not exactly all websites but many seem to be defaulting to their Mobile versions when using my Macbook Air... this is not dependent on browser type (Safare, chrome and firefox have been tried)... this is a new problem and may have started after the Mavericks update (although I am not 100% sure about the timing).
Has anyone had this problem? Any idea how to fix this?
Not exactly all websites but many seem to be defaulting to their Mobile versions when using my Macbook Air... this is not dependent on browser type (Safare, chrome and firefox have been tried)... this is a new problem and may have started after the Mavericks update (although I am not 100% sure about the timing).
Has anyone had this problem? Any idea how to fix this?
Similar Messages
-
Several days ago some of the links in my Apple Mail messages stopped working. Specifically, the links going to some variation of "response beacon" don't work. All I see is a blank screen. Does anyone have any idea how to fix this?
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
In my email all the messages from one person bunch together and I would like to separate them. I have done this before on my iPhone but just recently got an iPad and its doing it on this, so does anyone have any ideas how to fix this issue?
Settings >> Mail, Contacts. Calendars >> Organise by Thread. Switch to OFF to see every individual email in the Inbox.
-
My iphone 3gs says I need to restore my phone with itunes. when i connect the phone it says i need to unlock the phone which i cannont due because of the caution on the phone. How do i fix this?
Hold down the power button and home button at the same time until the phone powers on, shuts back off, powers on again and continue to hold it until it shows the itunes logo to plug in to itunes. This should allow you to restore without unlocking it.
-
My 2006 - 2008 Mac Pro running Lion will not play HDV 1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. However, when I open the project on my other Mac Pro running Snow Leopard and FCP 6, the footage works fine as it does on my newer Imac running Mavericks and FCP 7. I have tried a Quicktime update on the Mac Pro that the footage doesn't work on but it says that I already have the newest version of Quicktime installed. I have also tried reinstalling the Final Cut Pro Studio twice, still no fix. I'm completely out of solutions and need to be able to edit HDV footage on this machine. Any help would be great. Thanks.
there was a recent software update that seemed to screw HDV up. Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
Worst case scenario, do as Shane suggests. But might I suggest you take a look at the user tips section of the forum. there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc. -
? I get an Error msg when syncing ipad "The disk could not be read from or written to" when loading photos. Does anyone have any idea how to fix?
You have posted in the Mac forum for problems & questions usting the iTunes store. You will probably find more help in the following forum.
http://discussions.apple.com/forum.jspa?forumID=800 -
I have had this touch for almost a year. It suddenly starts going to home screen in middle of app, or when loading the app. Contract Killers has worked fine since I dowloaded it, but is not loading at all now. If I restore, will I be able to get my progress back from the backup?
Reset did not work. Just completed the restore, seems to have fixed the other apps from going back to the home page, but not Contract Killer.. I assume it is now a error on Glu's part. Hopefully they will resolve the issue. Thank you so much for your response.
-
Today I tried listening to music on my iPhone 4S, only to find that my volume adjuster had disappeared. And just to clarify, when I say that it disappeared, I mean that when I press the volume buttons on my phone, I see the speaker icon but the gauge bar is gone. I can't hear music or watch videos
Hi thecrane1137,
If you are having issues with the sound on your iPhone 4S, you may find the following article helpful:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Cheers,
- Brenden -
v
Only the individual that set the restrictions passcode knows what it is.
If you do not know it or have forgotten it, put the device in DFU mode (google it) and restore as new. -
the sound do not come out the headphones sometimes altho its all the way up in the setting and when i remove the headphones the sound doesnt come from the internal speaker either and only a reboot fixes the problem and thats annoying! any idea how tto fix this?
Hello. I've been able to play sound without problems through headphones or external speakers to date - the output always switched to these automatically until today. Now, sound output continues through internal speakers even if I plug in headphones or external speakers.
- I tested the headphones and speakers on other devices: they work fine.
- When I plug in headphones or speakers into the audio output port (I have verified that I'm not using the input jack) the devices are not detected and are not listed under the output tab in system preferences-sound.
I concluded from this that I probably had a problem with the audio port, so to test that I tried the following. I plugged a powered multi-USB device with ports for microphone line-in and headphone line-out into the USB port and switched it on. I verified that it was working by plugging a USB stick into the multi-USB device - this was recognised successfully, so the device was clearly working. I then plugged in headphones and speakers into the audio line-out on the multi USB device - but still no sound came through them (and tey were not listed among output devices) and the Mac continued using internal speakers.
What should I do? Does the latter test suggest that the problem does not lie with the audio port, or is my test not conclusive? What would you advise?
Many thanks indeed!
NG -
After successful install, all my adobe cc docs, when open, change pointer arrow, i-beam and window elements to oversize. When doc closes all return to normal size. I'm on a PC. Screen res set to medium 1920x1200. Any ideas how to fix?
Ok thanks Linxup I would recommend posting in the respective forums for each of those software titles as opposed to the Creative Cloud Download & Install forum. The relevant forums are as follows:
InDesign - InDesign
Illustrator - Illustrator -
My computer wont recognize my iphone 4. when i plug it into any computer it doesnt charge. i followed the procedure on the website but the device manager still says unknown device. any ideas how to fix this??? the weird thing is it use to work until yesterday. thanks
Will it charge when connected to a wall outlet? The USB port on your computer must be 2.0
Powering Apple and third party peripherals through USB -
When trying to download the new iPhone version, I keep getting an error message that my network connection has timed out. Any ideas how to fix this?
This is asked and answered many time each day. The forum search bar is on the right side of this page.
Disable your firewall/security software and try again. -
does anyone have any idea how one can keep their data on iPad after leaving icloud as it appears that you loose all data when doing this...its killing me!!!
rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle? -
I followed the instructions given to turn my automatic download icon in my iphone 3 and still goes back to off position. Any idea how to fix this issue without getting a new one?
Something may have gone amiss on your iPhone.
To attempt to correct this follow these steps:
Backup your iPhone using iTunes or iCloud.
Use iTunes to completely restore your iPhone as Factory new.
Monitor battery usage to see if it is normal. If not, you may have a hardware problem - if so, contact Apple support.
Restore your iPhone from your backup above.
Check battery usage to confirm that it is still normal.
Maybe you are looking for
-
Hi all, Is it possible to get the notes field of a certain object in a report. I Checked the data sources but can't seem to find the possibility to do it. Regards
-
How to interface with ROWID column in DB2?
I'm using DB2 version 7.1. I have a column in a table called ROWID, and the Data Type is ROWID. However, I don't know how to interface with it in Java. For example, for CHAR and VARCHAR, I use the String class. For SMALLINT, I use int, etc. But what
-
what's the difference between a project, a flash file or an swf file?
-
Printing to PDF: Adjust Margins?
Hi: I would like to adjust the margins in a report when printing to a PDF. Can this be done in OBIEE? Charlie
-
Error executing sca_undeployComposite :NameError: sca_undeployComposite
Hi, We are getting this error : Traceback (innermost last): File "<console>", line 1, in ?NameError: sca_undeployComposite Even when we are executing the script from MWHOME/soa/common/bin. Steps that we have followed are: Went to the location MWHOME/