ALL websites coming up as an untrusted connection, on a networked system and the other computers are not experiencing this so not the actual connection
My computer is suddenly not allowing any websites to connect. They all start with Untrusted Connection. It's EXTREMELY annoying. I just updated my Firefox version have restarted my computer twice. I have two other computers on my network in the office that do not have this problem, so I don't think it's my actual internet connection that's the problem - some setting must have been changed and I don't know what it was.
Check the Date and Time on your system to be sure that they are correct.
#If your system does not hold the Date/Time after being powered down and left off for a few minutes, the battery on your motherboard may need to be replaced. I replace mine about every 12 to 18 months to avoid such problems.
#If the Date is incorrect on your system, it may fall outside of the "Issued On" and "Expires On" dates for the certificate.
#To view the dates for the certificate(s) you should click on the Site Identity Button (colored icon on the left end of the Location/URL bar), then click "More Information", the Page Info window will open, click the Security Tab, then click View Certificate.
*Set your Date/Time: http://www.computerhope.com/issues/ch000554.htm
*Site Identity Button:
**https://support.mozilla.com/en-US/kb/Site+Identity+Button
**http://www.dria.org/wordpress/archives/2008/05/06/635/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
**'''''Adobe Flash version 11 (aka Shockwave Flash) is scheduled to be released 09/21/2011'''''
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]
Similar Messages
-
I also tried IE and the same thing. I am Win. XP with Norton. When I fill in the user name and password then click login, the page flashes back with the information gone.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
* http://support.mozilla.com/kb/How+to+clear+the+cache
* http://support.mozilla.com/kb/Deleting+cookies -
No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?
I've tried safari, chrome, firefox...I've cleared the cache as well. This has been going on for several months and used to be tolerable as it was not every website. Now it has become every website and is impossible to deal with. My roommates computer and my cell phone connect fine. I'm fully connected to the router yet websites don't load. I'm using 10.7.5. Thank you!!Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them in the content area! Nothing has been done to have changed this?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
Hi there.
I am having constant problems when trying to connect to www.pretty green.com.When going to check out it is telling me that the site is unsognes,unsecure and doesn't use encryption.Other people are not seeing this message.
I have tried everything from reinstalling firefox to disabling ad ons etc.
The website also say it is secure.
Why will firefox not let me connect to it and why could it be showing as unsecure?
Than you.Thank you for the updates. Since the server seems to be set up correctly, the '''sec_error_unknown_issuer''' could indicate that your connection to the server is being intercepted.
One common reason for this is that you use software like avast! 2015, Kaspersky, ESET, or BitDefender that has a feature of scanning your web traffic for threats. Firefox might not be set up to work with that software. If this is the case, when you view the site's certificate in the Add Exception dialog or in another browser, it usually will say it was issued by your security software provider.
Another possible reason is a hijacked connection or malware.
To try to sort this out, on the error page, do you see a section at the bottom which says "I understand the risks" with an Add Exception button? If so, click Add Exception and then click "View" to view the certificate. You don't need to actually add an exception, it's better that you don't, but this is a way to see the certificate.
If you check the "Issued by" section, what do you see there? I have attached what I see in Firefox 37 for comparison. Also, does the certificate path (chain of trust) on the Details tab look like the attached?
If you can't use Add Exception for this, you can click the padlock in the address bar in a different browser and use its certificate viewer. -
my internet connection is incredibly slow - I know it is not the fault of the modem as other devices are fast. This article was suggested to me as a solution. I think they were just trying to get me off their back. Anyone else experience this?
If Safari is getting very slow:
(Presumably you regularly empty your Safari cache by deleting the following file:
Home/Library/Caches/com.apple.Safari/cache.db
and clear your History)
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home-solutions ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296
If your computer is part of a network:please refer to this page: http://www.opendns.com/start/best_practices/#your_network and follow the advice given.
If you use a Router, make sure it has the latest firmware installed.
One reason for a slowness in page loading may be the 'DNS Pre-fetching' feature of Safari 5.x as is described here:
http://support.apple.com/kb/TS3408?viewlocale=en_US
You can cancel DNS pre-fetching by going to Terminal and typing:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
You have to restart Safari for it to take effect.
If Safari seems to hang for ages:
If you have a lot of tabs open and/or a lot of pages running Flash, Safari can sometimes 'hang', requiring a restart of Safari. This can often be inconvenient, and as it is rarely Safari itself that is hanging but merely one of its plug-ins, usually Flash, there is a way using Terminal to restart the plug-ins (without restarting Safari and losing your tabs) by quitting the WebPluginHost process:
Open the Terminal from the Utilities folder in /Applications and type
killall -9 WebKitPluginHost
Note that this command kills all Safari plug-ins, not just Flash. All plug-ins should start back up when you reload the page.
Then go back to Safari and refresh any pages that were using the Flash plug-in. This also fixes the Beachball of Death. Try this whenever Safari gets slow or freezes. The later versions of Flash 10.1 onwards appear to have improved the situation somewhat, but haven't completed eliminated it.
For this and other reasons Apple switched their websites to HTML5 in January 2011:
http://www.appleinsider.com/articles/11/01/26/apple_revamps_its_public_website_u sing_html5.html
For Snow Leopard/Lion users this should also be read:
http://support.apple.com/kb/TS3408 -
following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions as this is messed up all of my work relations?
Had the same problem this morning after updating to 10.8.2. Mail was finding my dot-mac account as always, but System Preferences popped up and said my iCloud password was incorrect. Did the "forgot password" reset, but still had the same problem. Then I went to icloud.com in Safari, logged in with the new password, it worked no problem. So I went back to the icloud preference pane, signed out of icloud, answered yes to all the warnings about data being deleted from my mac, blah blah blah, then re-signed in to icloud. Everything worked. I did have to set up my icloud account in Mail again, which now lists the account mailbox as "iCloud", and not "mac.com" as it did before. But so far, everything is working (fingers crossed.)
-
When connecting to server the other computers will not mount on the desktop
Hello
I have three computers connected wireless and ethernet. When connecting to the imac and mac pro with my macbook pro the other computers will not mount on the desktop. I have never had a problem like this before.
The imac and mac pro will mount the laptop or imac and the imac will mount the mac pro and laptop.
When I connect to the server with the laptop I can access everything thru the shared folders but nothing will mount on the laptop desktop using the, connect to server.
External HD connected with firewire will mount and the internal cd/dvd will mount.
I have ran permissions repair on the laptop. Have I accidently changed some configuration I am not aware of?
Any help or advice is greatly appreciated
Thank You
DickDick,
I know this sounds silly but while in Finder goto (Finder)/(Preferences) and then make sure your on the (General) tab, make sure all the things you want to show are checked.
If that doesn't help move the com.apple.finder.plist to the desktop you can find in in ~/Library/Preferences ( ~ = Your Home Folder), log out/log in, and see if that fixes the problem if not go ahead and move the plist file back.
hope that helps,
Weston -
We just moved from the United States to Costa Rica. The first two days my mac worked great. Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it. When I restart it seems okay and I see my main screen, but only for a second and then it goes black again.
This computer was brand new in June. Is it the humidity??? What can I do. Please help!!!!No guarantess but try smc and pram resets,
-
my keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random. "z" is the unresponsive character.
Is it a damaged keyboard ?
The laptop is just 2 months old, will Apple replace it with a new one if its indeed a damaged keyboard or just repair, I use it for official purposes so being without a laptop is not much of an option.No one here works for Apple, so we don't know what Apple might or might not do. If it's a genuine defect, they will of course repair it under warranty. It is not their responsibility if it effects your ability to work or not, so that's on you.
If, however, they determine that the key is problematic as a result of your misuse of the laptop, then everything is on you. And trust me, if they find a glob of dried up beer or coffee there, they will charge you.
Your only choice is to take it in for repair. -
i downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm and fyi i try all the ways to turn it on but it didnt sucsses
roaminggnome
thanks for helping but i didnt know that is the downgrade is forbidden and i ask for help and u didnt help me so i just want to thank u for telling me that is the downgrade is forbidden >>> but now i didnt have i phone any more so thank u so much again >>>> -
on Windows 7, CS6 all products, but especially need help with ID. Fonts that are showing in other applications are not showing in ID.
The ID Program folder will be relevant to your OS...
I took a shot and right clicked on my Scripts Samples, choose reveal in Explorer and opened up the ID Program folder.
As shown, there is a Fonts folder.
Drag/Copy/Paste fonts to this folder. -
I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it, and I can't for the life of me figure out how to fix this. Can anyone help? of course this happened after my warranty expired.
**update**
I don't know if this will help someone but I am posting this for that purpose. In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!). Well I didn't want to do that but it always stuck in the back of my mind. I had given up, really, and was planning to take my MBP to the apple store. But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working.
So, maybe try keeping the MBP in a cool place when it's off. Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
Hopefully this might help someone. -
When using FaceTime, all other sounds are muted. This defeats functionality. When will this be corrected? Does anyone know of a "fix" for this problem? This definately is NOT a feature.
yes, that is exactly what mine did too. I noticed that something is wrong after receiving calls and did not hear anything.
It was like the IPhone did not realize that the headphone is not any longer plugged in. I m not sure weather I plugged/unplugged the headphones after this more than once but it startet working correctly. -
My ipod connects with other computers but not mine.
my ipod connects with other computers but not mine.
Start here:
iPod not recognized in 'My Computer' and in iTunes for Windows
iPod: Does not appear in Windows or iTunes and Device Manager is empty
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Maybe you are looking for
-
Remove effect pluginn from final cut pro x
Is it possible to remove an installed effect (plugin FXfactory) from FinalCutPro X?
-
Why are some of my movies not syncing while others are? All of my movies are in m4v form, and some of them sync but some of them don't. Also, when i try to play my movies on my mac AND ipod, some of my movies just randomly freeze and wont let me cont
-
Error on smb2 after updating to mavericks
I updated an OS X 10.8 Server to Mavericks Server and I had some problems with Password Server that I Fixed ... but still 10.9 clients can't access to the shared folders using the Finder's side bar access while 10.8 clients can. As you'll probably kn
-
Invoice verification for SAP R/3 - Define Start logo
All, Does anyone know how to correctly upload a logo that seperates different company codes? THe configuration path is as followed: SPRO-Material Management-Logistic Invoice Verification-Incoming Invoice-Define Start Logo I can configure it fine, as
-
Hi Everyone, After reading several VPD whitepapers on the OTN I couldn't get the right method to solve my problem. It's clear that I've to create a policy function and to define the dbms_rls.add_policy. However, each whitepaper describes a method wit