All Windows I Install return boot\bcd error

Have a l645d-s4040.
Im Lost now.. I've read many threads similar to my problem, or exactly like my problem. Ive tried it all, and done at least 12 Different installs. heres the info:
Bought it brand new, was unaware of making the restoration disks until it was too late.
I had a virus, so I did "clean all" in diskpart, at the cmd prompt. So i can start fresh. I have a retail version of Windows 7 Home Premium 64 bit, which was the original OS. went through the installation process fine, until the reboot where its supposed to go through the second step of the installation. on reboot i get a "bcd\boot" error. Ive tried repairing the MBR, the Boot record, ive tried using align=1024, ive tried using paragon, and acronis to fix the boot record. Ive tried using boot managers. Ive tried installing windows vista, ive tried windows 7 ultimate 64 and 32 bit versions.. the only OS i can get to install is XP.. Im at a loss
of course of done : Startup Repair (http://www.sevenforums.com/tutorials/681-startup-repair.html)
So after the first step of of installation, which goes fine then reboots to continue the installation i get:
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click “Next.”
3. Click “Repair your computer.”
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configurations data.
Enter= Continue ESC=Exit
so i reboot with the install cd. which i downloaded from www.mydigitallife.info/windows-7-iso-x86-and-x64-official-direct- download-links-ultimate-professional-and-home-premium/.
And ran the startup repair, first time no OS found and failed to save startup options. rebooted and this time the repair worked and it booted fine running the 2nd step of the installation process.. on the reboot i got same boot\bcd error.. so i repeated the repair steps above.. it finally booted and finalized the installation.. i got to the desktop fine and installed all my drivers. when i rebooted i got the same error.
WHATS UP WITH THIS???

Satellite L645D-S4040
I would restore the hard disk to its original out-of-the-box contents using Toshiba recovery media, which you can obtain from Toshiba.
Order Toshiba Recovery Media
-Jerry

Similar Messages

Installed CS6 all but Illustrator installed correctly, I received error DF024, DW063, and DW050, how can I install Illustrator and fix these errors?

installed CS6 all but Illustrator installed correctly, I received error DF024, DW063, and DW050, how can I install Illustrator and fix these errors?
this is the log error file I get:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF024, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
----------- Payload: {AAF0D225-F129-40F2-916E-12E28DBD19ED} Adobe Illustrator CS6 Core 16.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/Frameworks/AdobeCrashReporter.framework/AdobeCrashReporter" (Seq 1649)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1649)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Illustrator CS6 Core_AdobeIllustrator16en_USLanguagePack: Install failed
ERROR: DW050: - Adobe Illustrator CS6 Core: Failed due to Language Pack installation failure

hold down shift-cmd-alt while starting ai. if done correctly, you'll see a preferences reset prompt.
if that fails, uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Recovery Disk Install will not boot ends with \Boot|BCD error

Hi
I have a Compaq Presario CQ56-219WM with Win7 64bit
The OS needed to be reloaded but the F11 recovery option was not working so I purchased the Factory Recovery DVD's from HP.
When I go through the install procedure with the factory DVD's the sytem is disk is reformatted and programs loaded but the system refuses to boot... it always ends with an error message say that it can not read \BOOT\BCD
I found a genuine Win7 pro DVD from another system and tried to run the repair options but that did not change the error
It seems that the factory recovery disk really don't work in all cases. Can anyone help with this?
Thank you

Boot from the Win 7 disc and try the suggestion here:
http://www.sevenforums.com/hardware-devices/82226-boot-bcd-0xc000000d-unreadable-boot-configuration-...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Windows 7 not booting. Says File:\Boot\BCD error

HI, I have purchased a HP Pavilion DMZ1 XL303AV laptop. I had got it serviced from a HP service centre as it had suffered water spillage. The service centre replaced the entire motherboard. Now, the laptop suddenly stopped working. It gives an error message: File : \Boot\BCD; Status 0xc00000e9 ; Info: AN unexpected I/O error has occured. It says if you receive this error, please contact hardware manufacturer.
I donot have a Recovery CD for this model. HP did not provide. I donot remember creating a recovery USB drive for this (This model has no CD/DVD drive).
The machine is not working . Please help

Hi SyedAR, I am sorry to hear that you are getting this error on your computer. I would strongly suggest that you contact HP Total care at 1-800-474-6836 or at this link if the number is outside your calling area. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html From what I can see from this error, you are going to need the recovery disks for the Windows operating system and you can get them from HP Total care. They will also be able to walk your through repairing your computer once you have the disks.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Boot\BCD error - SCCM 2012 R2

Hi,
This is a last ditch attempt before I throw in the towel and rebuild the server.
I am running an SCCM 2012 R2 Hierarchy with two primaries and multiple distribution points.
One of our main DPs has started coming up with an error when pxe booting a windows 7 machine. This happened after a corrupt driver was added to the boot image. The driver was removed and all the DP's rolled back but the issue still remains on this server
alone. We use an IPhelper to point the pxe requests at this server.
The error message is:
File: \Boot\BCD
Status: 0xc0000098
Info: The Windows Boot Configuration Data file does not contain a valid OS entry.
I have tried the following:
1. Removing the PXE role and reapplying it.
2. Removing the Boot images and reapplying them.
3. Removing the DP altogether from the console and reapplying.
4. Removing all data from the DP and starting again.
5. Redistributing the boot images. both x86 and x64
6. creating a new boot image for both x86 and x64 and applying those.
smspxe log is as follows
D4:3D:7E:BF:11:A4, 00000000-0000-0000-0000-D43D7EBF11A4: device is not in the database.
SMSPXE 20/10/2014 09:30:44
5064 (0x13C8)
Warning: Matching Processor Architecture Boot Image (0) not found
SMSPXE 20/10/2014 09:30:44
5064 (0x13C8)
D4:3D:7E:BF:11:A4, 00000000-0000-0000-0000-D43D7EBF11A4: Not serviced.
SMSPXE 20/10/2014 09:30:44
5064 (0x13C8)
Warning: Matching Processor Architecture Boot Image (0) not found
SMSPXE 20/10/2014 09:31:04
5064 (0x13C8)
D4:3D:7E:BF:11:A4, 00000000-0000-0000-0000-D43D7EBF11A4: Not serviced.
SMSPXE 20/10/2014 09:31:04
5064 (0x13C8)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 09:33:20
2208 (0x08A0)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 09:33:20
2208 (0x08A0)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 10:33:20
5012 (0x1394)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 10:33:20
5012 (0x1394)
Found new image CAS00004 SMSPXE
20/10/2014 10:53:11 6076 (0x17BC)
ADK installation root registry value not found.
SMSPXE 20/10/2014 10:53:11
6076 (0x17BC)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 10:53:11 6076 (0x17BC)
Opening image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 10:53:11
6076 (0x17BC)
Found Image file: D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
PackageID: CAS00004
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 10:53:11 6076 (0x17BC)
Closing image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 10:53:11
6076 (0x17BC)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 10:53:40
6076 (0x17BC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 10:53:40
6076 (0x17BC)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 10:58:12
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 10:58:12
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 10:59:07
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 10:59:07
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:00:05
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:00:05
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:05:24
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:05:24
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:06:05
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:06:05
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:07:15
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:07:15
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:07:58
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:07:58
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:09:31
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:09:31
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:11:58
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:11:58
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:13:52
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:13:52
4664 (0x1238)
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE
20/10/2014 11:15:27 5064 (0x13C8)
E8:03:9A:B3:F3:8A, 163A84E0-1DD8-11B2-8000-DF82815C2DDB: device is not in the database.
SMSPXE 20/10/2014 11:15:27
5064 (0x13C8)
Getting boot action for unknown machine: item key: 2046820364
SMSPXE 20/10/2014 11:15:27
5064 (0x13C8)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820364" ServerName=""><Machine><ClientID>47938388-164c-4bfb-8621-28b57859ad3c</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="PNL20009" OfferIDTime="26/02/2014 15:13:00" PkgID="PNL0000C" PackageVersion="" PackagePath="http://INTCMNCLDP001.intraining.co.uk/SMS_DP_SMSPKG$/CAS00004"
BootImageID="CAS00004" Mandatory="0"/></ClientIDReply>
SMSPXE
20/10/2014 11:15:27 5064 (0x13C8)
E8:03:9A:B3:F3:8A, 163A84E0-1DD8-11B2-8000-DF82815C2DDB: found optional advertisement PNL20009
SMSPXE 20/10/2014 11:15:27
5064 (0x13C8)
Getting boot action for unknown machine: item key: 2046820364
SMSPXE 20/10/2014 11:16:14
5064 (0x13C8)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820364" ServerName=""><Machine><ClientID>47938388-164c-4bfb-8621-28b57859ad3c</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="PNL20009" OfferIDTime="26/02/2014 15:13:00" PkgID="PNL0000C" PackageVersion="" PackagePath="http://INTCMNCLDP001.intraining.co.uk/SMS_DP_SMSPKG$/CAS00004"
BootImageID="CAS00004" Mandatory="0"/></ClientIDReply>
SMSPXE
20/10/2014 11:16:14 5064 (0x13C8)
E8:03:9A:B3:F3:8A, 163A84E0-1DD8-11B2-8000-DF82815C2DDB: found optional advertisement PNL20009
SMSPXE 20/10/2014 11:16:14
5064 (0x13C8)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:26:15
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:26:15
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:27:12
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:27:12
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:27:25
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:27:25
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:28:36
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:28:36
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:29:41
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:29:41
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:30:43
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:30:43
4664 (0x1238)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:33:20
4664 (0x1238)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:33:20
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:33:51
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:33:51
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:35:31
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:35:31
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:37:29
6076 (0x17BC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:37:29
6076 (0x17BC)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:39:25
6076 (0x17BC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:39:25
6076 (0x17BC)
================= PXE Provider shutdown. =====================
SMSPXE 20/10/2014 11:42:25
4700 (0x125C)
================= PXE Provider loaded. =====================
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Machine is running Windows Longhorn. (NTVersion=0X603, ServicePack=0)
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Initializing PXEPerfObject. SMSPXE
20/10/2014 11:43:19 4372 (0x1114)
Could not load logging configuration for component ccmperf. Using default values.
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
HTTP is selected for Client. The current state is 0.
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
Adding CAS00004.40 SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
Adding CAS00005.45 SMSPXE
20/10/2014 11:43:30 4372 (0x1114)
Found new image CAS00004 SMSPXE
20/10/2014 11:43:44 4372 (0x1114)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:43:44
4372 (0x1114)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:43:44 4372 (0x1114)
Opening image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 11:43:44
4372 (0x1114)
Found Image file: D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
PackageID: CAS00004
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:43:44 4372 (0x1114)
Closing image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 11:43:44
4372 (0x1114)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:44:34
2028 (0x07EC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:44:34
2028 (0x07EC)
Found new image CAS00005 SMSPXE
20/10/2014 11:44:56 4372 (0x1114)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:44:56
4372 (0x1114)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:44:56 4372 (0x1114)
Opening image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:44:56
4372 (0x1114)
Found Image file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
PackageID: CAS00005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:44:56 4372 (0x1114)
Closing image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:44:57
4372 (0x1114)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:45:45
2028 (0x07EC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:45:45
2028 (0x07EC)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:45:54
4372 (0x1114)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:45:54
4372 (0x1114)
PXE Provider finished loading. SMSPXE
20/10/2014 11:45:54 4372 (0x1114)
Error opening file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim. Win32=32
SMSPXE 20/10/2014 11:46:33
4744 (0x1288)
Retrying D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:46:33
4744 (0x1288)
Boot image CAS00005 has changed since added
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:46:36 4744 (0x1288)
Opening image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
Found Image file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
PackageID: CAS00005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:46:36 4744 (0x1288)
Closing image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:46:53
2028 (0x07EC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:46:53
2028 (0x07EC)
Boot image CAS00005 has changed since added
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:47:50 4744 (0x1288)
Opening image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
Found Image file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
PackageID: CAS00005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:47:50 4744 (0x1288)
Closing image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
================= PXE Provider shutdown. =====================
SMSPXE 20/10/2014 11:47:58
4372 (0x1114)
================= PXE Provider loaded. =====================
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Machine is running Windows Longhorn. (NTVersion=0X603, ServicePack=0)
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Initializing PXEPerfObject. SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
Could not load logging configuration for component ccmperf. Using default values.
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
HTTP is selected for Client. The current state is 0.
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
Adding CAS00004.40 SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
Adding CAS00005.45 SMSPXE
20/10/2014 11:48:50 5008 (0x1390)
Found new image CAS00004 SMSPXE
20/10/2014 11:49:15 5008 (0x1390)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:49:15
5008 (0x1390)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:49:15 5008 (0x1390)
Opening image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 11:49:15
5008 (0x1390)
If anyone has any further info on this please can you let me know?
Thanks so much.
Katie

Hello,
Is your WDS running properly? If WDS is stopped, can you start it manually?
Or you get an error like 'The service did not respond in a timely fashion'?
The symptom is so similar to that I have encountered. You referred that you have tried to remove WDS, DP, but I wonder how. Before removing WDS and DP role, try to delete corrupt package in SCCMContentLib folder.
I just recreated SCCMContentLib, and WDS did start working. I guess there are corrupt packages in the my folder as well. But another problem occur, I installed all the roles on the same server in my lab, so it is a primary site server as well. As a result,
it seems that I have to re-deploy all the packages. Not sure if there is any further problem yet. Since it is just a lab environment, it doesn't matter for me.
I hope what I have done will give you some clue.

\Boot\BCD error (0x000014c)

Here's the full story. A friend of mine gave me their laptop because they weren't able to get it to boot. It was having the "BOOTMGR is compressed" error, so I booted up my MiniPE and uncompressed the drive. After uncompressing, I restarted the computer and it booted up just fine. Once inside Windows, I went to Shut Down...Restart the computer. Once it rebooted, instead of going to Windows I get the error as follows:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart the computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
File: \Boot\BCD
Status: 0xc000014c
Info: An error occurred while attempting to read the boot configuration data.
Alright, so I've seen this error a bunch of times before. Until now, I had only ever seen this error on Vista machines and I've read that it can happen to Win 7 users, too. The problem is, this computer is running Windows XP SP3.
When my buddy bought this laptop (HP Mini 1000... the really tiny one with no built-in DVD/CD and only has a 16GB SanDisk pSSD drive), he opted to buy the Windows XP Downgrade directly from HP. This computer normally runs Vista (I don't know how with its specs) but this one was imaged by HP for Windows XP.
Is there a solution for this for XP users? I've already run CHKDSK which corrected a lot of errors, and I've already run an MBRFIX which didn't do squat. I wouldn't normally hesitate to run a Repair on the OS, but HP didn't send him any operating system discs. If I use a TechNet XP Home SP3 cd, I don't think it will accept his product key (damn HP OEM).
Any suggestions?
P.S. This isn't related, but what's with all the healthpills posts advertising online pharmaceuticals? Do they really think anyone who frequents tech support forums are gonna follow that link? :o

Actually it is not hard to fix this this problem
What you will need to fix it is :
1- A 2gig flashdrive (I used a 2g and it worked,not sure if any other size works)
First visit this link https://www.dropbox.com/s/t88gryfudq3741n/RepairDiscWindowsVista32-bit.iso (Thats my dropbox which contains the Windows vista Iso DO NOT EXTRACT IT , just put it on your desktop and leave it there.
2-Visit this link and download and download the usb installer(On the bottom of the page it will mark Download uii in a blue box) , this will turn your flashdrive into a bootable flash drive http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/
3-Run the program and it should look like this http://www.flickr.com/photos/100773530@N06/
(Make sure you select Windows Vista Installer and note that this will not reset anything on your victim Computer )
4-Now in the select your iso option in the program select the iso which you downloaded from my dropbox by selecting browse AGAIN DO NOT EXTRACT
5-Now put your flashdrive in your computer and select the drive And when everything is done it should look like this http://www.flickr.com/photos/100773530@N06/
6-Now select create and note that THIS WILL FORMAT YOUR FLASHDRIVE\
7-Now you have a bootable flashdrive
8-Now insert your flashdrive into yoor victim computer and go into your Bios and set your usb as your first boot device by moving it first in the order (If you dont know how to do this visit this link) - http://www.youtube.com/watch?v=C8VZ95_XFA8
9-Now restart your computer and it should mark Windows is Loading files on bottom of the screen Just leave your victim computer like this for about 10 - 15 minutes and it should just have a blank screen without the user accounts.
10-Restart your computer by pressing the button on the Tower and select Last known Good Configiration DO NOT TAKE OUT YOUR FLASHDRIVE and your computer will start normally
11-Take out your flashdrive and restart computer again and you are good to go
When this works please vote thats all i ask Hope I helped you

Windows 7 install via boot camp assistant fails

I have a iMac 2.8 Ghz Intel Core 2 Duo with Mac OS X Version 10.6.8.
I also have a USB drive formated as Master Boot Record in MS-DOS (FAT) format. The USB has a capacity of 4GB+ and for now only includes a file named 'unattend.xml' and a folder named 'drivers'. I created this USB drive when advised by a Boot Camp support site, because the Windows 7 install created a blank screen with a small flashing line on the upper-left of the screen.
The I have burned an ISO file of Windows 7 Pro English 32 bit from the Microsoft site (I'm Gold partner).
So I started of by clicking on the Boot Camp Assistant, tried to download the nesecarry Windows drivers, but it refused... This seemed to be a normal problem which I could ignore (I heard). So I selected 'I have the Max OS X Installation Disc....' and pressed continue. I now prepared the size of the Windows environment and when that was finished, I inserted the burned DVD (which works perfectly fine on non-Apple computers).
All this time, the USB drive was in the back of the iMac.
I waited a while and the computer rebooted. A white screen appeared and after a while, the screen went to black, with the flashing little line on the upper-left of the screen...
What is it that I do wrong? Any help is really appreaciated.

Partitions are not drives
you are just seeing user volumes
your sig showed you still run 10.6, not Lion, no recovery partition (which is hidden)
The update to lion puts the recovery partition between where Mac and Boot Camp use to be and would have been.
I am opposed to upgrading to Lion. Do clean install, even to an external drive.
To me all that is needed is in the manual and here
http://www.apple.com/support/bootcamp

How do I "get Windows" to install with Boot Camp

I never, ever thought I would have to utilize Windows ever again, but the real estate industry is so outrageously hostile to the Mac platform, most or all of the industry software and websites ONLY run with IE on Windows. So I'm f'ed. But I don't know much about Windows. What is the latest version? I heard Vista is really crap? Is XP better? My man question though is:
According to the Apple site, all I need to do is "get Windows" and install it through Boot Camp. On the Microsoft site under "Buy", they funnel you straight into buying a whole PC in order to get Windows. I can't find anything about just buying a copy of the OS.
Would appreciate some basic clarification on getting started with this subject...
Thanks!

Hi Christopher,
first for clearance: your signature states a G5 dual 2GHz. Is this still correct ?
Because BootCamp only works on Intel-Macs not on PPC-Macs like yours !!
Bootcamp itself is merely a helper application which sets the Mac up so that Windows can be installed.
For a Windows installation you have to have/buy a Windows XP Home or XP Pro with Service Pack (SP) 2 or 3 or a Windows Vista Home / Business or Ultimate.
These can be found at Amazon or Newegg for example.
You can not use so-called Upgrade-discs and manufacturere-branded OEm-disc (from Dell, Hp or the like).
You can use so-called System-Builder discs.
Personally for your use XP would be my first choice, since Vista is for my a 'Nice Try' but not more.
If you can wait a little bit, the I would propose to get Windows 7 which should be out later this year, since it's the Vista that Vista has never been.
Apart from BootCamp there are Virtualization applications like Parallels, VMWare Fusion and VirtualBox which would better suit your needs, since they allow you to run Windows while still be in OSX, whereas with Bootcamp you have to restart your Mac in order to run Windows.
http://www.parallels.com/products/desktop/
http://www.vmware.com/products/fusion/
http://www.virtualbox.org/
For these you also have to have/buy a Windows license/CD.
Hope this helps.
Stefan

S440 problem downgrading to Win7 - /boot/BCD error

HI,
I´m trying to downgrade to Win 7 prof on a new S440.
I have downloaded Win7 Prof 64bit from MS site, disabled Secure Boot in the Bios, but when booting Win 7 on external DVD drive, it quickly ends in a black screen telling:
Windows faild to start .....
File: \EFI\Microsoft\Boot\BCD
Status: 0xc0000000d
Info: An error occured while attempting to read the boot configuration.
Trying to boot from a DVD having a Win 7 Home 64 bit, which works on "normal machines", it simply freezews during loading Windows to RAM. This seems to have somwething to do with the new UEFI.
This is a show stopper, and cant uderstand why Lenovo do not provide a prober guide of how to down grade to Win 7.
Apåart from this, there is no serial number writte at the buttom of the machine, meaning, we have to call Microsoft and convince them to give ua a key for Wint 7 prof.

Answered in other threads
http://social.answers.microsoft.com/Forums/en-US/vistarepair/thread/1920f1c8-a1d3-416c-b03b-ca998f6cec7a
http://social.answers.microsoft.com/Forums/en-US/vistaperformance/thread/3df8c662-2076-4d1a-8e3e-7fbabc800445
Rgds
Milos

Eject CD on Windows XP instalation using Boot Camp

Hi all...
I was trying to install Windows XP PRO (my version is Windows XP Home + Update to Windows XP PRO).
I insert Windows XP PRO update on laptop run BootCamp and all goes well.
It boots, load blue screen Windows XP installation and shows you options to install Windows.
My problem is when you are on blue screen of windows installation and It requested to me insert Windows XP Home version to check valid update to Windows XP PRO. How can I eject CD? Eject button doesn´t work.
Thanks you.
Cheers,
Jonas

Hi Jonas,
sorry to say, but you can't eject the Windows CD during the installation, since the Mac disc-drives don't have an eject-key and the eject-key on the Mac keyboard dos not work at that time due to a not-installed driver.
Best and maybe only way is to install XP Home on your Mac, then boot into XP Home and insert the XP Pro upgrade CD.
Setup should start automatically and install XP Pro on top of XP Home on the harddisk.
Regards
Stefan

Windows 2012 R2 UEFI boot issue: "Error reported: Unsupported"

Hi,
I am trying to install and boot from windows 2012 R2 UEFI OS.
I could install this OS in UEFI mode and but while booting i.e. executing the BOOTX64.efi from UEFI shell getting below error:
"Error reported: Unsupported"
this message comes on UEFI shell.
I have tried executing BOOTMGFW.efi (inside EFI/Microsoft/Boot/) as well, but I get the same message.
in what situations I may get this error?
PS: I am not allowed to insert snapshot.

Hi Maxwell379,
Please refer the following article to confirm your hardware meet the 2012R2 on UEFI requirement:
Deployment Options for UEFI based Computers
http://blogs.technet.com/b/askcore/archive/2011/03/25/deployment-options-for-uefi-based-computers.aspx
UEFI Firmware
http://technet.microsoft.com/en-us/library/hh824898.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Parallel/Windows XP installed b4 Boot Camp. Can I still install Boot Camp?

Hi, I'm new to Mac and I installed the parallel program and windows xp on the mac before installing the boot camp. Is there a way to install the boot camp software and not uninstall microsoft xp and it's programs and the parallel program?

Hi and welcome to Discussions,
sure thing you can, but you can't use the Windows license you use with Parallels with BootCamp too.
You have to buy a second one.
And you can't use the Parallels Windows Virtual Machine for install with BootCamp as it needs to be installed from a Windows CD/DVD.
The other way round, using a BootCamp Windows for a Parallels Virtual Machine is possible.
Check with the Parallels manual on how-to achieve this.
Regards
Stefan

Opening windows side by side in windows 8 installed using boot camp installer

I currently have windows 8 installed on my macbook pro (Mountain Lion) using boot camp 4 (updated boot camp drivers on windows 8 to boot camp 5). I wanted to keep skype and wordament app open at the same time side by side, but I was unable to keep the two app windows in this mode (it looks like it allows only one active window. I tried other apps, but none of them worked. I tried the suggestions listed in this link (http://www.dummies.com/how-to/content/place-two-windows-side-by-side-in-windows- 8.html), but again this failed. Unfortunately,everything that I tried seems to not work. . So is this issue with my macbook pro or is it that boot camp does not support it. I would really appreciate it if someone could give me a solution or at least explain to me what is causing this issue..Thanks.

Then you are more then likely using the Metro Apps that only allow one program on the screen at a time. You need to switch to the Desktop versions of those programs and then you can resize and move the program windows wherever you like on the screen. Side by side, Top and bottom, one high right the other low left, Whatever.

Windows 7 instal dual boot

I'm trying to install windows 7 as a dual boot. I downloaded easybcd to take care of the dual boot start selection. Then proceeded with usb instal which didn't work. So I then downloaded the iso and burned to disk. Which wouldn't load (yes bios had dvd as first boot), but I then just went into windows 8, found the setup, which started. When I clicked update and instal it hung and crashed. But when I hit don't update and install. It did just fine. Went through the whole install and down the list of like 5 items 0-100%.
But now, after rebooting after installing, it just sits at the starting windows screen, with the red green blue yellow windows 'flag' flashing brighter/softer. Its been there for like 20 min. After rebooting, I get options for windows 7, windows 8, or windows installer. If I try 7 I get error right away and it restarts me, if I choose 8 it loads me into my normal windows 8. IF I choose installer, it brings me back to the starting windows screen.
I don't know if its still installing things, as the windows flag is flashing brighter and then softer over and over, but its been again another 30 min and its still there. No % marker or anything.
I haven't installed any drivers (which I have saved on d:/ and on a usb as well) as I haven't had the opportunity nor know when to install them other than after windows starts.
Any help much appreciated.

I tried that, but when I get to the select a drive/partition screen, it that's where it says cannot install on that drive/partition. No option to continue. But, once I get my super raid daughter board and my 3x 480gb crucial m550 msata drives, I will just have one msata set up gpt for windows 8, one set for ntfs and for windows 7, and then the third will have to be my scratch disk. I'll then use my 2.5" 1tb Samsung evo for all data, source files, and use my external enclosure with 1tb Samsung evo for my export. Wish there was a way to get the new gt72 4x m.2 sata daughter board.

Installing Windows 7 Using bootcamp 5.0 on MBPr OSX 10.8.2 Black Screen Not Loading Windows 7 Install on Boot

I am trying to install Windows 7 using Bootcamp Assistence 5.0 on a MacBook Pro Retina OSX 10.8.2, I went through all steps on Creatting the Windows 7.iso into a bootable USB Dirve 16GB I use a separate USB Drive 2 GB and download Windows Support Drivers Step 2 on bootcamp assistence. I run into the problem in step 3 when the computer reboot I just get a black screen the back display still on like I can still see the apple on the back lit up, but the screen is black and wont load the window installer, if i shut it down and bring it back up i get error saying IOS not found so then i have to shut it down, enter recovery and restart on osx partition, i can see that the bootcamp partition was created but cant load windows to it. Please can anybody help me or guide me on what i am doing wrong? thank you so much in advance

this will install as normal. before installing however you will need an activation key cos in win 7 this is one of the first pages that is presented before instalation.
the key from your relative could possibly work especially if he used your internet connection to register. but this could cause problems with his/your authenticity after 30 days.
the only other option is to purchase a key.
you say a 30 day trial, does it give you a temporary key for this?

All Windows I Install return boot\bcd error

Similar Messages

Maybe you are looking for