All working but "...verify connected.." stops using it

Hi Thanks for looking over.
Installed playbook cd on laptop. All went well. Both were communicating with each other during install.
Also little window said it's in z on laptop.
When the BB desktop program starts up on laptop all is fine until a small text window saying....
"Before you begin, verify that your current playbook is connected to your computer"
Yes it is and on. Playbook is saying it's connected.
Restart and message on laptop will show that playbook has been disconnected. And connected when restarted.
When the message 'before you begin..." comes up it greys out the BB desktop program so it cannot be used.
How do I tell the text box - yes everything is verifed connected so it will work? No check box or anything.
Thanks. Yes did a reinstall - fix erros and same thing. Restarted both laptop and playbook (few times) and same message.
Thanks
Jim
Solved!
Go to Solution.

FIRE IS OUT -
Yes working fine now. What was wrong?
Went to the website and download the update for the Playbook Desktop Software here
http://us.blackberry.com/apps-software/desktop/desktop_pc.jsp?lid=us:bboftwareesktopSoftwareC&lpos=u...
Installed and bingo - success!

Similar Messages

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working, help!

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working. help!

I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
Why are you posting in this forum about what occured with an independent service provider? How is is at all relevant to Apple?? In fact, service by any person or business not authorized by Apple voids any waranty.

My old computer (a Sony) with my iTunes crashed. I have a new MAC and want to make sure I can keep all of my music (mostly from old CD's that have been lost). I bought iTunes match hoping that would work but it isn't using the data on my phone. HELP!

My old computer (a Sony) with my iTunes crashed. I have a new MAC and want to make sure I can keep all of my music (mostly from old CD's that have been lost). I bought iTunes match hoping that would work but it isn't using the data on my phone. HELP!

Since you have purchased a new Mac (which, BTW, is not typed in all capitals) why not buy a Time Capsule <http://www.apple.com/airport-time-capsule/> which is designed specifically to work with OS X and Time Machine?
You don't say what part of your Sony "crashed." If it was not the HDD it is possible to take the computer apart, put the HDD in an external case, then recover the data off of it (including the music) simply drag-n-drop. If it was the HDD that "crashed" that makes it more difficult.
If you are able to recover the music from the Sony you can then add it to the iTunes library on the Mac and iTunes Match will then scan, match and upload the tracks to be mirrored in the cloud.

TS3276 Sound works fine on all programs, but has suddenly stopped on Apple Mail. No "submarine" sound when I send or receive email. I checked the settings in "Preferences" in Apple Mail and it is set to "submarine" as the sound. Any help?

Sound works fine on all programs, but has suddenly stopped on Apple Mail. No "submarine" sound when I send or receive email. I checked the settings in "Preferences" in Apple Mail and it is set to "submarine" as the sound. Any help?

deleted previously imported key chain originated from the previous system (why doesn't apple provide a migration for my key chain?). after the deletion mail can receive and send again and dreamweaver starts without hanging.

TS4268 My iMessage doesn't work on my iPad. My software is up to date, wifi is working, apple ID is working but the verification stops and goes back to sign on. Why does this happen?

My iMessage doesn't work on my iPad. My software is up to date, wifi is working, apple ID is working but the verification stops and goes back to sign on. Why does this happen?

Look at no. 5 in this text which was copied from Apple's support site for troubleshooting Messages and FaceTime activation.
Troubleshooting Apple ID activation
After each step, toggle iMessage and FaceTime off and then on again in Settings > Messages and Settings > FaceTime.
Update to the latest version of iOS.
Ensure that you have an active Internet connection. You can complete activation using Wi-Fi or a cellular data connection. Check your Wi-Fi network using standard Wi-Fi network troubleshooting.
If you receive an error when signing in to your Apple ID, visit myinfo.apple.com, sign in to your account, and ensure that the primary email address has been verified.
Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
In Settings > General > Date & Time, ensure that Set Automatically is on. If Set Automatically is on, but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
Enable iMessage and FaceTime while connected to another Wi-Fi network in a different location.
This is the support kb article.
http://support.apple.com/kb/ts4268

Wifi works but no connection to Internet.

Wifi works but no connection to Internet. 2nd MacBook Pro on same wifi network works (but is using Snow Leopard while I am using lion 10.7.4). iPad works. Everything was working fine until yesterday.

Have restarted router several times. My laptop started working after I did something (under stress, hard to remember, but at least was repairing permissions, maybe more...). Now, the laptop next to mine (my girlfriend's) has the same problem I had. In Network Diagnosis, the first four lights are green, but Internet and Server are red. The router is not mine (we are renting) and not an airport express--it is a Linksys Wireless-G 2.4 GHz: WLAN light and light 1 (in series 1 to 4) are flickering. There is a separate light, Internet, which is not lit. I am writing this from my laptop which IS working from this router...

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

HT4436 i changed apple id all ok but i cloud still using old account ?s

i changed apple id all ok but i cloud still using old account ?

Did you go to settings>icloud, scroll to bottom and tap Delete? Then you enter the new ID/password.
Also, did you install iOS 7?

Airplay is stop working but network connection ok: airport express

Hi,
I hope someone could help me, I can't find the solution.
I have an airport express which I use for internet access and airplay.
Sometimes when I awake (from sleep mode) my MBP (running OSX 10.6.8) airplay doesn't work anymore. It means Itunes says that remote speaker airport express cannot be found and airport utility can't find the airport express either. But internet connection still works perfectly!
So I have to reboot the MBP to get back my airplay service, the problem seems to be on the mac.
I have updated airport utility and airport express to the latest firmware, so I don't have any other idea.
Would you have ideas?
Thanks!

Found the fix under a different search. Turns out the Linksys router was blocking the iTunes. Have no idea why it would show up momentarily and then disappear though. In any event, the fix is:
I have a wired Ethernet network and run through a Linksys cable/DSL 4-port router. Model #BEFSR41. Here's how we fixed the problem step-by-step:
1) Open a browser window and access the router control panel by typing in 192.168.1.1
2) Click on the "Security" button at the top of the screen
3) There are two subnav options under Security. Click on "Filter IP" (I believe it's already highlighted.)
4) At the bottom of that page, there is a set of four or five radio buttons. One of them says "Filter Multicast". Mine was disabled. CLICK THIS TO ENABLED.
This fix comes directly from this post about getting Apple TV to work:
http://discussions.apple.com/thread.jspa?threadID=2234430&tstart=0
Hope this helps anyone else who has this problem!

Time Capsule: Wired connection works but cannot connect via wifi to net

Hi all,
I've had a Time Capsule for a year or so. I've been having problems with connectivity over recent months and I'm not sure where the issue is.
I have plugged in an ethernet cable joining my MBA to the TC, and another from the TC to the wall socket. I can access the internet without any problems.
However, if I unplug the ethernet cable from my MBA (or indeed if I don't plug it in in the first place) then I cannot connect to the internet. I can still back up to Time Machine etc., but nothing can get 'through' the TC.
Also, if I turn Mobile Data off for my iPhone, I cannot then access the internet via WiFi through the TC.
Any ideas as to how to fix this? The TC is in bridging mode, which has worked fine before. All suggestions welcome!

Ok.. let me try again..
Going back to your first post.
I have plugged in an ethernet cable joining my MBA to the TC, and another from the TC to the wall socket. I can access the internet without any problems.
However, if I unplug the ethernet cable from my MBA (or indeed if I don't plug it in in the first place) then I cannot connect to the internet. I can still back up to Time Machine etc., but nothing can get 'through' the TC.
When you plug in via ethernet the MBA works but not by wireless..
Now add that to the new info.
The campus network relies on each PC's individual MAC address and then assigns IP addresses as required;
Is the MAC address actually registered?? Because the MAC address of the ethernet port of the MBA and the MAC address of the wireless are different.
If the MAC addresses are not registered.. how does the Uni know the difference between a computer and a router??
You are not allow to run a router that feeds DHCP into the uni system.. but they cannot know what you have behind the MAC address of the item plugged in. A computer or a router.
So the TC has to be in bridging mode - which has worked perfectly well previously
Try releasing the MAC address to the PORT.. because the uni might have decided they don't want hubs connected either.. therefore the address of whichever device that is plugged into the wall is registered at the switch and will not allow a change for a fix period.. that is one way to stop people changing stuff around.
Try powering off the TC.. when you use another item.. or change from ethernet to wireless.. then power up the TC again and then power up the device .. eg the wireless on the laptop.. If it fails, it is not the TC that is causing it.. because in bridge the TC is completely dumb. It has no ability to control the MAC address being sent to the main router. None whatsoever.
If your TC recently upgraded to 7.6.4 firmware.. though.. well it can do all kinds of nasties.. flash it back to 7.6.1 and factory reset it.. and hope it works as it did before.. if not the uni changed the system to prevent your TC acting even as a hub.

Photosmart 7510 will not scan. Printing, faxing, Eprint all work, but no software for scanning

I have spent over 10hrs on the phone with Tech Support, Cloud service, and an HP escalation manager. The HP escalation manager ran a scrubber tool to completely remove all of the HP printer software and reinstalled. Now everything works except for Scan.
Using the HP Scan utility from the PC gives, "The HP Photosmart 7510 series was not found"
Using Scan to Computer for the printer display gives, "Make sure HP Printer software is installed". I can, however, scan to a memory chip inserted into the computer, but is produces a jpg file and I need PDF. All of the scanning software used to work before tech support and HP escalation got involved.
This question was solved.
View Solution.

If you have it connected to a network, it sounds like a firewall issue.
It could be a firewall you are running or a firewall that your ISP or router is running that you know nothing about.
Info needed:
router make and model
ISP
antivirus/firewall you are running
There is a document that addresses ports and exceptions for a networked printer that usually correct the problem.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00040499&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
The ports and exceptions are listed under Solution 6-->network-->method 2.
SandyBob
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP
1-800-474-6836

Help Xerox c1190 All in one MFP. All working but can not see Scanner

Hi all,
I hope someone can help. I just bought a new Xerox C1190 MFP. I run a small wireless network via airport express b/g and an imac and macbook pro.
I connected the xeroc all in one to the airport by USB
After a long tough search i found the up dated drivers for 10.6.2 and all working fine except for the scanner.
Image ready and the network just cannot see the scanner. No matter what i do. Driving me nuts. No info anywwhere. The singapore xerox people say its an apple problem abd the apple people say its a xerox problem.
Image ready just can not see the scanner but in the print and fax preferences i can see the printer and printer works no problem. The scanner just does not appear connected.
Has anybody got any idea on how to solve this problem?
Also, i read in the manual that you can set up the Xerox by USB AND Ethernet. I thought i could run the printer on USB and set up the scanner to run on as a network IP item. Basically set up the Xerox to run as both USB and Network IP .
My problem is that when it comes to setting up IP address and stuff like that i need step by step instructions. Completely confused about IP addressing and how to set up a network item.
Could anyone please help.
Thanks
Joe

Review my post here:
http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/SOLUTION-Get-Win-7-Printer-Drivers-HP-Solutio...
And see if something similar will work for you.

790XT G45 All Works but no vga signal

Please see specs in signature, i bought new chassis as below and since the transfer, no boot, everything runs cpu fan etc. but no vga signal.

Ensure that all power cables are connected.
Else:
Motherboard Grounding to case causing No Post
Test the motherboard outside of the case to verify that the motherboard is not shorting to the case and causing a problem
• With only the CPU and heat sink, memory, and video card (or onboard video) connected to the motherboard, place the motherboard on a non-conductive surface and retest the motherboard
• Check the case mounting standoffs to verify that they are lining up correctly with the mounting holes on the motherboard.

Speaker works, but no sound when using iPhone handset and no typing sounds

Hello, This is the 2nd time this has happened to my iPhone in the last month...
When I type a text message, lock the phone, slide to unlock the phone, start up the phone, use the iPhone itself to talk to someone on the phone, etc - the sound does not work...
It does work using the bluetooth headset and it also works on speaker phone (I am able to hear my calls). The ringer for my alarm clock works, but not when someone calls me. The ipod is not working either - I am unable to hear songs.
The silence switch is not turned on (on the side of the phone) and I've checked the other settings as well... I also restored my phone last night hoping that might work and I've reset the settings on the phone as well...
Can anyone please help me with this issue?
Thanks!

Did this occur after using the earbuds?
Try inserting and removing the earbuds several times in a row.

My iPad says it is mirroring but it is not displaying on the tv screen. The tv is hooked up with iTV and it all worked at first, then stopped. The set up was monitored by a Mac professional. Any ideas?

My iPad says its mirroring but nothing is showing up on the tv screen. The set up for both the iPad and iTV was assisted by an Apple professional and it worked the first time I streamed a movie, but has never worked since. Can anyone help?

Have you reset the printing system? OS X Mavericks: Reset the printing system
After the reset you'll need to reinstall your printer.

All working but "...verify connected.​." stops using it

Similar Messages

Maybe you are looking for

All working but "...verify connected.." stops using it