All you guys, from Creative, got for your millions of costumers is

...lots of junk (it's more light than what I think about it)? It's not fair! We spent lots of money on it and now all we got are complaints about that! It isn't correct.

Perhaps you should try posting what your problem is so the community could try to help. Or maybe call Customer Support. It might be more helpful to you than just coming in to add a complaint. That's like walking into a hospital just to say you're sick, and there's way too many sick people in the hospital, and it's not right that the entire world is sick.
This is forum a hospital for sick players, don't come here expecting sunshine and giant candy smiles. If ALL of our customers came in here, this post would be pushed to page 3 by everyone else's new posts before you could even refresh your page to see it.
So, what exactly is wrong with the player? Any error messages? The more info you can give everyone, the more likely we are to figure it out.
Dale

Similar Messages

Got error - You must supply payment terms for your non -credit transaction

Hi Experts,
Recently we upgraded the 11.5.8 Instance to 11.5.10.2.
we have one customized application which is related to recievables.
If we submit Surcharge demand generation request it has completed with error.
but in ra_interface_errors_all table i'm seeing the error like You must supply payment terms for your non -credit transaction in message_text column.
we ran the profile option migration report concurrent request for product specific task after upgradation.
due to this issue we cant able to run the demand generation request.
Please help me to solve this issue.
Thanks
R.Sundaravel

have a look at Note 178298.1 & 331099.1!!!
HTH
Prashant Pathak

You cannot supply payment terms for your credit memo

Hi,
My req is as per below,
1) I would like to apply payment terms on credit memo screen throgu auto invoice creation.
When i tried to update ra_interface_lines_all.term_id then i got error message : You cannot supply payment terms for your credit memo
Can someone gudie me.How is it possible?
Thaks,
Raj
Edited by: RajPatel on Sep 23, 2009 8:33 AM

Hi octavio,
Thanks for your valuable input.
You are right and also I found from metalink...
Subject: 11.5-AR-How Can You Enter Payment Terms For Credit Memos
Doc ID: 249547.1 Type: HOWTO
Modified Date: 16-DEC-2003 Status: PUBLISHED
goal: How can you enter payment terms for Credit memos
fact: Oracle Receivables 11.5
fix:
Payment terms cannot be used in Credit memos. This is standard functionality.
The trx_date/gl_date of the credit memo transaction is the date which is
considered as the due date of the credit memos. This is the current
functionality.
Thanks,
Raj

I am a teacher of IT Information Technology for high school students of a public school in the state of Minas My Brazil, and would like to know if you guys have dreamweaver cs5 for students and flash, so I can teach students the construction of these site

I am a teacher of IT Information Technology for high school students of a public school in the state of Minas My Brazil, and would like to know if you guys have dreamweaver cs5 for students and flash, so I can teach students the construction of these sites trough applications

Hi,
In addition to what Ken said, I would suggest that you give Edge Animate a shot as well.
Creative Cloud is available as trial version for 30 days and almost all creative software is bundled with the Creative Cloud. Tutorials are included for each of the products on the respective sections of the website. For instance, this site Website builder | Download free Adobe Dreamweaver CC trial gives you access to the trial version as well as tutorials.
I suggest that you go to http://creative.adobe.com and explore the various options available.
For any purchase related information, feel free to send me a private message if you need further clarification. Click on my picture and use the message option. The experts on this forum can help you with other questions you have on using Creative Cloud.
Thanks,
Preran

Autoinvoice error - You must supply payment terms for your non-credit trans

Dear all,
I've this error "You must supply payment terms for your non-credit transaction" shown on AR_RA_INTERFACE_ERRORS_ALL table after ran the autoinvoice.
In the RA_INTERFACE_LINES table I had inserted this value "14 DAYS" in TERM_NAME field already but this error still happend.
Thanks..

have a look at Note 178298.1 & 331099.1!!!
HTH
Prashant Pathak

I just tried to open an indesign project and was told my trial has expired. why is this i need to open this project NOW !!!! also i noticed you're offering creative cloud for 29.99 us, i'm paying 45.00 canadian, why is this?

i just tried to open an indesign project and was told my trial has expired. why is this i need to open this project NOW !!!! also i noticed you're offering creative cloud for 29.99 us, i'm paying 45.00 canadian, why is this?

Heathervillistus if your membership is not able to be validated then it is due to a connection error between the computer and our activation servers. Please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to solve the connection error.
If you have questions regarding the pricing of your plan then please contact our support team directly at Contact Customer Care.

Can you guys indo a update for me, it makes my phone lag

Can you guys indo a update for me? IOS 8.3 lags my phone, and the keyboard gets stuck at times. The touch ID is doesn't recognize me. Please?

You cannot regress once you've installed an update.
Try resetting your iPhone. Hold the on/off and home buttons together for about 10 seconds until the Apple logo appears.

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

Sync message, "You have changed the settings for your iphone. Would you like to apply these changes?" What does this mean? I don't recall changing anything...

Sync message, "You have changed the settings for your iphone. Would you like to apply these changes?" What does this mean? I don't recall changing anything...

The main settings that are changed in these cases can be found in this article:
http://support.apple.com/kb/ht1386
To ensure you don't lose any data you don't want taken off, ensure that each Summary, Apps, Music, Movies, TV Shows, Podcasts, iTunes U, Books, & Photos have the settings you would prefer on the computer.
If anything gets changed on any of those pages, you will be prompted with that message. If they look fine, especially after adding some media like songs or videos, then you can apply the changes without fear.

Can you guys make a update for an iPod touch 2g 4.2.1with a background??, Can you guys make a update for an iPod touch 2g 4.2.1with a background??, Can you guys make a update for an iPod touch 2g 4.2.1with a background??

So can you guys make a update for iPod touch 2g for back grounds and maybe the message app and and a diff lock pattern

Given that it's been two years since the last iOS update for that iPod touch model, it's safe to assume there won't be any more unless someone finds a glaring security hole in it, and even then it will only be to close the hole.
(72045)

Need you guys to test something for me on your MBP

i have had my MBP for a week now. its been great. but today i just noticed something. wanted to know if it was just mine or all of them. also was wondering if it was hardware or software related.
the probelm is simple. when i use the trackpad it works fine. but if i go and use the keyboard (for example, to copy and paste, or to type in an internet address in safari) then go back to use the trackpad it does not work. but even crazier is that it just does not work on the right side of it. i need to touch the far left side , then my mouse works again and then i can use the whole trackpad. until i use the keyboard again....then i have to hit the left part of the trackpad to get my mouse to move again. can you guys check it out and tell me if im the only one, and also you opinions if this might be a hardware or software related issue.

nevermind. i unchecked "ignore accidental trackpad input" in the preferences and all is well again. thanks.

How do you guys upgrade the DDL of your apps?

This is to start a brainstorming discussion, just like the one you would have between DBAs and developers around the watercooler...
I am considering revamping the way DDL upgrades are done in-house. I was wondering how you guys go about doing that, whether you are an Independent Software Vendor or the developer for an in-house application.
if you're an ISV, how do you supply and implement new versions of your DDL to your customers?
if you are responsible for the development/maintenance of an in-house application, how do you carry out your DDL upgrades?
I would like your responses to be around the methods and the tools you use to upgrade the SQL code (mainly the DDL) of your applications.
Looking forward to everyone's input.

In a modern application, a developer should seriously consider Edition Based Redefinition (EBR) - a feature (comes with the database) every customer has since 11g R2. With EBR, have the ability to install new versions of your code (plsql, triggers, views, synonyms -etc) in the database without impacting (blocking, locking, overwriting) the existing version. So you can install version 2 of your application while version 1 is still running.
Additionally - taking it a step further - if you put editioning views in place (a special kind of view that allows you to only select from a single table, no where clause, just a select list - sort of like a synonym with a select list), you can achieve many online DDL upgrades as well.
for example, let's say you wanted to add a new index to a table, change the format of an existing column from number to varchar2 (to allow for alpha-numeric values in the future) and drop an existing column that is no longer needed - you could (assuming the editioning views are in place):
a) create a new edition as a child of an existing edition. It'll be as if you copied all of your code/synonyms/etc - you haven't, but it will feel like it
b) add a new column of type varchar2. (this column will NOT be visible to version 1 at all in any way)
c) put in place a forward edition trigger that will take any modification of the existing number column and reflect it in the new varchar2 column
d) use dbms_parallel_execute to update the existing number column to itself ,this update can commit every 100 rows or so (no locking issues really) and will cause the new varchar2 column to be populated for all existing rows. any new rows added by version 1 of the application will automagically be reflected
e) in version 2, create a new editioning view that selects out the right columns from the table (don't select the number, select the varchar2 and alias it as the old column name if you want)
f) put your new plsql/synonyms/grants whatever in place in version2
g) create an invisible index on the table you wanted to index - you can do this online. the index will be invisible so it won't affect ANY existing query plans (you haven't tested the old sql with it - you just know that version 2 likes having it)
Now version 1 is running and version 2 is ready to go. Easiest way to roll out would be to schedule a tiny maintenance window - alter the databases default edition to version 2, make the index visible and restart your app servers. the are now running version 2
a) drop/set unused the old number column
b) get rid of the forward edition trigger
if you'd like to read more about this:
A Closer Look at the New Edition
Ask Tom: Edition-Based Redefinition, Part 2
Ask Tom: Looking at Edition-Based Redefinition, Part 3
and of course
http://docs.oracle.com/database/121/ADFNS/adfns_editions.htm#ADFNS020
tom kyte

How to delete all my photos from my iphone for storage space

my photos are taking up a large portion of the storage on my phone...i've uploaded them to my computer and now i'd like to delete them all so i have more room for music. how can i delete them for good on my phone? is there any way to delete the following albums (or at least the pictures from the albums) : events from my mac, faces from my mac, and the last 12 months album. i just want to be able to put more music on my phone but my pictures are taking up more than half of the storage! please help

If you've synced photos to your iPhone through iTunes, change your sync settings in iTunes to not sync any photos and apply the change.
That will remove all synced photos, but not photos that you've taken with your iPhone's camera -- for those if you've imported them to your computer then to remove them you have to delete them one by one from the iPhone, or use your computer (assuming you have a Mac, iPhoto should allow you to select and delete what's stored on the iPhone, except for synced photos via iTunes).
Then there's iCloud photos. iCloud only holds the last 30 days of photos, but your device will continue to hold them up to the 1000 photo limit, regardless of how old they are. To reduce these, you can delete one by one, or if you Restore your iPhone that will strip off all iCloud photos, and add back only the last 30 days of iCloud photos, assuming you leave the Photo Stream setting ON in iCloud settings.

A new feature in iTunes 7 allows you to set the Kind for your video??

I'm new to Apple TV and I use Windows for the itune. My question is my music video.
I have a lot of video music that imported to Itunes to play on my Apple Tv
the problem is, when I Imported them it automatically put the kind of video
to "movie". I know you can change this individually to music video.
Is there a way to do it all at once instead of one at the time?
Thanks for your help
Ben

There's a Doug's AppleScript called Set Video Kind of Selected that does batch processing of the video tags.

Could you guys recommend some books for me?

I have been using Labview for about one year. Just do some simple
programming, and learned Labview just from the examples Labview
includes. But I want to learn more and improve my skills, so could you
guys please recommend some good books talking about Labview prgramming
for me? thanks a lot!

In article <[email protected]>,
[email protected] (tao) wrote:
>so could you
> guys please recommend some good books talking about Labview prgramming
> for me?
>

All you guys, from Creative, got for your millions of costumers is

Similar Messages

Maybe you are looking for