AllFusion Erwin Data Modeler Connection to SAP NW2004s Systems
We would like to use a data modeling product that we purchased for many of our SAP NW systems. We understand that there may be some restrictions on DB direct user connections and would like to confirm the following from those that may have exposure in this area:
1. If we connection the DM product to SAP, are there any restrictions on the data that is read from the SAP DB?
2. Are we violating any SAP license agreement by using the third party tool for data modeling on our SAP NW systems (since it will require a DB connection)?
3. Any other helpful information?
Any guidance would be very much appreciated.
Thanks and best regards,
Chris
Hi Chris,
How does your DM product plan on "connecting" to the SAP applications? Most of the time, SAP applications provide Remote Function Calls (RFC) (i.e. in the programming world, methods) for programmers to call in order to push or pull data to itself. There are no restrictions here aside from the normal authorizations given to access data on the application. Although SAP discourages any direct manipulations directly to the database layer.
Regards,
John Ta
Similar Messages
-
Oracle client for CA Erwin data modeler
Does anyone know how to install and configure oracle client for Erwin data modeler?
CA tech support says check with oracle>
I need some help understanding what client means.
>
Client is any server that connects to a database. I am assuming that CA will be installed on a Windows XP machine and it will connect to a remote database on another server. I am assuming since you have not provided any details.
>
I can upgrade to 11g database. No problem
>
OK - not sure what this has to do with your issue.
>
I am looking for the oracle software that connects to CA Erwin
>
See my links posted above
>
I am not looking for Oracle database install
>
The client install does not install a database - it installs the necessary components needed to connect to a remote Oracle database.
>
Please be more specific.
>
More specific with what ? The more lucid details your provide, the better the quality of the responses on these forums.
HTH
Srini -
How to maintain version in ERwin Data Modeler
Hi all
Please tell me
how to maintain version in ERwin Data Modeler
regardsIn SharePoint, navigate to the form library, and then click Library Tools > Library > Settings > Library Settings.
On the Form Library Settings page under General Settings, click
Versioning settings.
On the Versioning Settings page under the Document Version History section, select either the
Create major versions option or the Create major and minor (draft) versions option, and click
OK.
http://www.bizsupportonline.net/blog/2012/10/version-control-infopath-forms-templates-sharepoint-libraries/
Or
plan this wsp nfoPath_VersionHistory.wsp
http://infopathversioning.codeplex.com/ -
The Data Model connection could not be created
Hello,
Using powerquery, I am trying to access daily logs conveniently, the are over 24m records in a month.
I have selected the columns i need, and checked the box ' load data to Model', Once the query has ran it returns the error, "The Data Model connection could not be created".
Thank you for any help on this :)This is a tough one because as an add-in, we can't get much information from the API for failures like this. Our general recommendation for people working with big data sets is to use 64-bit Excel. I realize that's a big hammer, but it might be your only
option if you need to work with a 24 million row data set.
Another option (which you may have already done) is to filter and aggregate that dataset as much as possible before adding it back into Excel. The analysis done inside the Power Query editor is less likely to negatively affect the working set on your machine.
(It does depend how the query is built and where the data is come from. If we have to pull all the data into memory to do some of the operations then it won't help at all.) -
Connectivity between SAP ECC system and SAP BI
Connectivity between SAP ECC system and SAP BI
Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!Hi Holger.
this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
1. check your BI system logical name from the myself source system.
2. go the ECC and run the transaction sm59
3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
4. double click it and edit it now check whether the Target hostname or ip is OK.
5. In the logon tab check the client number User and password settings.
Save it and test it with both Connection Test and Remote Logon.
if every thing work fine i hope your problem will be solved.
kind regards,
Zeeshan -
Adaptive RFC model connectivity to SAP R/3 4.6 B
We are developing a new webdynpro application which uses the backend R/3 version is 4.6B using Adaptive RFC model.
We are able to connect to Web As systems without any issues but getting error messages while creating the Adaptive RFC model to R/3 4.6 B system as backend.
Appreicate your help.
Message was edited by: Udaya ChadaHi ,
I think SLD,s/w Catalog and Creating Logical Systems were Configured,
Go through the Following Steps Like,
-- General Data, Enter the Client of the System and Client No. (JCo Connection is Pointing to)
--J2EE Cluster, Select the J2EE Cluster you wish the JCo destination to be assigned
-- Select the Destination Type, Either Application/Dictionary data
-- Appl.Server, You may only select Servers/Logon Groups From the Drop down list that have first been defined as technical Systems in SLD.
-- Message Server, Application Data JCo destination is connected must have atleast one logon group.( if this is not done ,use SMLG transaction code to create in SAP System)
--Security, If you have selected connection Type as Application Data , then in the Security Screen you would appear Authentication Techniques and select a appropriate one .
if you have selected connection type as a Dictionary meta data then provide User Name and Password
If this is useful to you ,don't forget to award Points
--Venkat -
Metadata from Erwin data model to BO Designer
Hi,
I have generated a CWM XML file from ErWin, that contains the physical table names of all tables in the model. I am using universe "metadata exchange" to convert this data model into a universe. The first time "create universe" is happening fine.
The problem is while updating the model.
There is a "owner" field specified in Erwin table. If thats left empty, the tables in the universe schema are generated as "unnamed_NNN.<TABLE_NAME>". (NNN is a number)
Obviously I have to remove the unnamed_NNN from the tables so that it will recognise the default database for the connection.
Say, the metadata has undergone some changes and we want to update the universe with new metadata. I used "metadata exchange" to update the universe from the model. At this time, it creates a new table and class with "unnamed_NNN.<TABLE_NAME>", instead of updating my TABLE_NAME class and object definition with the changed metadata.
This basically means update doesn't function as expected. Can anyone suggest if this is a limitation of the metadata exchange or am I doing something wrong ?I am trying to do the same thing using ER/Studio and have the same problem.
In addition, the joins from the model are not being reflected in the universe.
Vikas -
Data connection from SAP-R3 System to Xcelsius using Web Services
Hello Everybody,
Anyone tryed connecting data from SAP-R3 System to Xcelsius using Webservices? (created in ABAP function module)
SDN downloaded document says to Generate Webservice URL through ABAP (by creating function module) and import it in xcelsius
Data -> Add Web service connections
by giving the URL to import. After giving the web server login credentials, the error says 'Unable to load URL'
Any idea would be great help
Note: I tried by following the thread & its not working:
http://forums.sdn.sap.com/thread.jspa?threadID=1520321
Thank you,
Anand
Edited by: Anand Amirtharaj on Feb 20, 2012 7:51 AM
Edited by: Anand Amirtharaj on Feb 20, 2012 7:53 AMHi,
With regards to your statemetn "SDN downloaded document says to Generate Webservice URL through ABAP" <- can you tell me more please? references/links/attachment?
As far as I am aware, that the type of web service required for integration it a 'normal' Netweaver Web app server web service.
There are limitations about the complexity of the WSDL - see Notes:
1653655 - Limitations in Web Service WSDL URL usage in Xcelsius 4.0
1703839 - Limitations of Web service usage in Xcelsius / Dashboard Design
also , changes between SAP versions requires reworking the WSDL
Note 1625091 - The WSDL URL for web service which generated in SAP Enterprise Central Component cannot be loaded into Xcelsius
regards,
H -
Hi All,
I have one requirement to design the data model for BI. How to design a dataflow in BI. I know dataflow is different from data model. Could you pls let me know hoe to design it.
Is there any model available ...so that i can refer. if not let me know clearly what is a datamodel and how to design it.
Thanks,
JackExample of data flow:
http://wiki.sdn.sap.com/wiki/download/attachments/44794331/a6.gif
Data model:
http://wiki.sdn.sap.com/wiki/download/attachments/36064/5.JPG -
Connect one SAP BW system to multiple R/3 systems
Hi All,
Has anyone done a connection of one SAP BW system to multiple SAP R/3 systems. I know it is theretically possible, but please let me know if anybody has experience of doing it. Our scenario is that take HR data from one R/3 system and other modules data from another R/3 system.
Also please let me know the steps of connecting the systems, the do's and dont's and any special config that needs to be done.
Also what are the risks?
Thanks in advance.
Regards,
RajibHello,
after you connected the new source system, there are some additional steps to do. But this is common for all new source systems:
-> Set conversion of source system names in RSA1. This is necessary for Transport of Objects in BW. Go to RSA1->Tools->Conversion of Logical System Names
-> Set Assignment of Source System to Source System ID. You also find this under RSA1-> Tools. This is only important if you use a Source system ID like in IO 0SOURSYSTEM.
-> Replicate Application Component Structure of DataSources. Therefore go to DataSources. Select your Source System (If you are on BI 7.0) and go to the Header, right click you mouse and replicate Tree Metadata and then replicate DataSource.
Best regards,
Peter -
How to configure sap maxdb client to connect to SAP ERP system (SAP HR)
Hello all,
I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps
1. Install SAP DB using installation MAXDB CDs
2. Install SAP Livecache and standalone server SCM 5.0 using SAP ERP master and Livecache dvds.
3. install Livecache client fromSAP ERP master and livecache dvds between SAP ERP and livecache server.
4. configure in LC10, tcode.
but when i press on livecache monitoring in LC10 it gives me following error.
Command: DBMRFC
Parameter: -gsapfive -xsapgw00
SY-SUBRC: 8
Return Code
sap maxdb clienti tried the said things and after that i am getting following error in DB59, first three steps are successful but 4 one is failing.
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: <hostname>_<SID>_00 ( Windows NT )
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Successful
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( LCA ) No connection
SQL Code: 4008
POS(1) Unknown user name/password combination
For detailed information, see the developer trace for work process: 1
please see trace from file dev_rfc and dev_w0 below
log for dev_rfc
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: MKUMAR (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
Log from dev_w0
A RFC 1485 CONVID 47150684i tried the said things and after that i am getting following error in DB59, first three steps are successfuk but 4 one is failing
trace from file dev_rfc is below
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: ABC (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
A RFC 1485 CONVID 47150684
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: abc (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47149684, {FDB31AE0-D203-F1C0-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host <HOSTNAME> / sapgw00
M * ERROR program IDOCTEST not registered
M *
M * TIME Fri Jan 07 18:15:25 2011
M * RELEASE 701
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 679
M * MODULE gwr3cpic.c
M * LINE 1778
M * DETAIL TP IDOCTEST not registered
M * COUNTER 715
M *
M *****************************************************************************
M
A RFC 1485 CONVID 47152747
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: ABC (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47151731, {FDB31AE0-D203-F1C1-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Mani -
Data Reconciliation Node on SAP Source System
Hi Gurus,
I'm working on Data Reconciliation between SAP BI and SAP R3 systems. I've read on the forum that the reconciliation DataSource technology is available as of PI-BASIS 2005.1 / SAP NetWeaver 2004s. I'm using
SW Comp Release Level Highest Support Desc
PI_BASIS 2005_1_640 0017 SAPKIPYJ6H Basis Plug-In (PI_BASIS) 2005_1_640
I wonder that I cannot see the Data Reconciliation Node in the transaction RSA6 in the SAP Source System. Please throw some light on this whether I need to activate them.
Thanks & Regards,
Ash.Hi Sunny,
Thanks for your response. Can you suggest me what should I do to get those DataSources? Are there any patches that SAP has released to overcome this problem for lower versions as the one which I'm using?
Thanks,
Ash. -
Spread the Data Loads in a SAP BW System
Gurus,
I want to spread the data loads in our BW system, as a BASIS person how do I identify the jobs if they are full loads or delta loads, our goal is to make the load on the system to be evenly distributed as we see too many data loads starting and running around the same time. Can you suggest a right approach to achieve our goal.
Thanks in advance
SivaHello Siva,
As already mentioned the solution is to include the different steps of the data flow, extraction , ODS activation , rollup etc
in process chains and schedule these chains to run at differet times so that they do not place too much load on the system.
If the problem is specific to data loads on the extraction step then I guess that maybe you see the resource problem on the
source system side, if you don't have the load distribtion switched on in the RFC connection to the source system it is
possible that you can specify that the source system extraxction jobs are executed on a particular application server,
please see the information in the 'Solution' part of the note 147104 and read it carefully.
Best Regards,
Des -
All Fusion Erwin data modeller to Oracle 10g connection.
Hi,
I have instaled Erwin Datamodeller Release 7 successfully .That is a trial version.When i try to connect to Oracle from Erwin,it gives an error that ora7nt.dll is not installed and contact the Oracle DBA. I could not find any ora7nt.dll in Oracle Homes.Did any of you face this problem and please help me.
Regards,
SelvaHi Selva,
This is a forum for Designer, not CASE tools in general. I suggest you take a look at the http://www.infoadvisors.com/ site, as that has an Erwin Users Discussion Group (you'll need to register) or talk to your technical support contact at Erwin.
rgds, Antony -
Edge 3.1 Data Services connection to SAP ECC 5.0 on AIX server
I've got a client who is trying to create a Data Services extract from an SAP ECC 5.0 system on an AIX server. The Data Services is installed on a Windows box and is the Edge 3.1 version. He is able to connect to the SAP datastore, is able to import the metadata for a table and browse the data, but the data transport in the R/3 Data Flow fails due to a permissions problem on the file generated in the working directory on the SAP server (as indicated by the Data Services error message).
We have confirmed that the file can be opened and modified by the same user that the Data Integration service is running under. I have also duplicated his environment and settings in a sandbox virtual machine, except that our SAP ECC 6.0 system is running on MS Windows Server 2003, and the transfer works fine in that environment.
Does anyone know how to resolve this issue? Is there a permissions setting we're missing?
-Kurtis Carter
Solution Engineer
Bramasol, Inc.Simply means that in the case you have more than one instance you need to shutdown down the instance you are working on and all the other ones too.
Regards
Juan
Maybe you are looking for
-
Implementing if-statement in jsp-sites
Hi, I have a Vector in a jsp-Site as a property that I can refer to in the following way: <c:set var="mo" value="${requestScope.montag}"/> Now I want to test if the second element of this vector equals "0" or not. I tried things like: <logic:equal sc
-
BackgroundMediaPlayer high memory usage
Hi, I have a problem with WP8.1 Background task with BackgroundMediaPlayer. When I have just the simplest app, which have virtually zero logic in both the task and and app, when the task is started, it takes 15MB of memory. When playback starts, it j
-
Reg: IDOC Purchase Order
Hi All, I have a requirement to trigger a Purchase Order from Stock Transport Order (STO). So whenever the STO is created, IDOC needs to be triggered & create a auto PO in the same client. I tried with some examples from forum thread, but all goes in
-
Explain me these codes ...
private var mineField:Array=new Array(); public function Main() { // mine field creation for (var i:uint=0; i<FIELD_H; i++) { mineField[i]=new Array(); for (var j:uint=0; j<FIELD_W; j++) { mineField[i].push(0); trace("Row "+i+": "+mineField[i]); trac
-
Problem in Creating Business Partner in E-REC system.
Hi Dear Friends, We are using SAP E-REC as External Instance . Problem is when we move Master data from ECC to E-REC infotype 1001 ( Sub type A 0008 ) is not moving so that Business Partner also not getting Created . I che