Allocate memory

I am getting this error, everytime i close AE
( 76 :: 0 )
Unable to allocate 0.003 MB of memory. Either decrease the memory requirements for the rendering of this frame, or install more RAM. (12803 / Text Engine Data). For more information, see www.adobe.com/go/learn_ae_mem
This happened after updating to AE 12.1.0.168, before that never had this error.
And it seems that still all my work is saved
Max OSX version 10.7.5
Marco

The After Effects CC (12.2) update fixes this.
Let us know how it works for you after you've installed the update.

Similar Messages

Safari won't open web pgs, says cannot allocate memory - HELP?

Just got iPod Touch, connected to WiFi, but any web page I try to open with Safari gives me the same message: *POSIX error 12, Cannot allocate memory. NSPOSSIXErrorDomain.* What on earth does this mean, and why can't I open any websites??? Grateful for any assistance! Thanks - lizmo

I've never succeeded in opening a page yet! This is my first attempt. I get the same error message every time. Thanks for any help.

Db_load error: Cannot allocate memory

Hi
when I try to import an dump file, i always get this error:
db_load: BDB2055 Lock table is out of available lock entries
db_load: Cannot allocate memory
I executed "db_load -f outdb/outdb2 -h env xass.db"
and i have set max locks by:
dbenv->set_lk_max_locks(dbenv,1000);
but it doesn't work.
What should I do to prevent this problem?
Thanks for your help in advance
Mark
Update:
I have doing some tests, and i found that if I increase the number of locks by "set_lk_max_locks" in DB_CONFIG file, the operation of db_load will success.
The point is that the larger db file may need a very big value of locks, so why "db_load" doesn't release the locks during the running procedure? Is this a bug for bdb?
becuase I can't increase the number of locks infinity!
if not, How can i cause "db_load" release the locks of transaction?
Does anybody can help me?
Mark

Hi Mark,
If you are importing a dump file into an existing environment and opened with the flags of(can have more) DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN, then it is true you may see the error about "lock table is out of available lock entries" when the dump file is very big. The db_load process will not release the locks since it needs to provent other process from accessing the database being built to provide data consistency in the transactional environment.
The usually way for loading a database from a dump file is to specify an empty directory as the home directory. By this, the database will be created in a private non-transactional environment, and you can copy the database into your running environment after the db_load process finishes.
Regards,
Winter, Oracle Berkeley DB.

Can't restore iPod classic 60GB video. Cannot Allocate Memory - Disk Utility

Sorry if this has been asked before but I've been searching the boards and am yet to find a result.
I have an old iPod classic 60GB (video) which has a dodgy HDD. It was clicking and in a constant sad face/charging loop. I've managed to get it display "Please restore iPod" message and it is now being recognised by my macbook. I've tried to restore it via iTunes but when I try that I get an error message tht says "The iPod could not be restores because it is busy".
I've tried toformat the iPod using Disk Utility too but i get an error:
Disk Erase failed with the error:
POSIX reports: The operation couldn’t be completed. Cannot allocate memory
The oddest thing is that under disk utility my iPod drive is showing up as a 2TB drive:
All I'm realy trying to do is restore the iPod so I can try to recover some of the tracks using Disk Drill. Can anybody help?

See if you can find a window based PC and try to do a Restore there.

I can no longer access Safari on my ipad. I get the error:the operation couldn't be completed. Cannot allocate memory. Help please!

I am not able to access Safari on my ipad. I get the error message: The operation couldn't be completed. Cannot allocate memory. Can anyone help please??

Try this first.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work, reboot the iPad - or quit all apps and restart.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit all apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.

The merge process could not allocate memory for an operation; your system may be running low on virtual memory. Restart the Merge Agent.

I encountered this problem on our SQL2012 and I have tried different scenarios (see below) to no avail. I have decided to give up and check if someone here has encountered this and resolved it.
One thing I know, it's not a memory issue. Both servers we're using has lots of memory to spare and we monitor the memory as the replication goes through it's steps.
I hope someone can help me on this. Thanks!
The Error:
The merge process could not allocate memory for an operation; your system may be running low on virtual memory. Restart the Merge Agent.
Our Scenario
We're using SQL Server 2012 SP1. All subscriptions are pull based.
We're using direct Merge Replication (not FTP or web sync)
We already have 10 active replications with larger databases. Only 1 has this issue.
Database size is less than 5 GB
Rebuilding the publisher is not an option.
What have I tried?
There is no memory problem --- we have lots to spare
I have tried re-initialization of the database. Same problem.
I tried deleting the database and reinitializing it. Same problem
New snapshot. Same problem.
I tried changing the subscriber server but still same issue.
MCP, MCSD, MCDBA (ANXA)

Here is the result for the sp_configure on our subscriber. We're doing a pull on the server with the issue.
name
minimum
maximum
config_value
run_value
max server memory (MB)
128
2147483647
2147483647
2147483647
In addition, I made a comparison between the working servers and the one with the issue -- there seems to be a difference in the service pack. Publisher has none but the subscriber is operating on SP1. But still strange as only 1 database is affected.
MCP, MCSD, MCDBA (ANXA)

Using Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".

I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!

I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
Could be you have the wrong cd/dvd. The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
Not sure. Could be your machine does not support the startup manager. You would think the machine would ignore the key.
Where did you get the dvd? What is the number on the DVD?
What machine do you have anyway?
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )

Unable to copy hard drive on to external device from Disk Utility. Getting error message "cannot allocate memory".

I am trying to retrieve the information on my hard drive after I spilled liquid on my keyboard . I can get to Disk Utility by using the boot up disk but when I try and copy the hard drive to an external device using "New Image" it tells me it is unable to create a copy because it "cannot allocate memory".

Were you able to get any help with this problem? My MacBook Pro out of the blue wouldn't boot up all the way and now I'm trying to get a copy of everything onto the new external drive using disc utility but am having the same errors as you! Thank you for sharing any tips!! -Norah

Partition Failed Partition failed with the error: POSIX reports: The operation couldn't be completed. CAN NOT ALLOCATE MEMORY

I plug usb mass storage device to my macbook pro i7 than every thing is stack and i reinforce to shutdown and than I start again but mac fail to boot again.
I tried different optiones in disk utility in mac os startup disk. but still fail to repair, erase and partition. I try to fix with the steps listed in
https://discussions.apple.com/message/13288923#13288923
but it fail to partition with the msg:
Partition Failed
Partition failed with the error: POSIX reports: The operation couldn’t be completed.cannot allocate memory
pls pls pls help urgentely on this matter I stop working.
Kind Regards,
pe

Hi again OGELTHORPE.
I've already run two hardware tests. One quick one and one extended one. It was unable to pick anything up.
It's like everything is running perfectly, but when I go to erase the HDD or partition it, it pops up with the error message. Even when I try to erase and partition using "Terminal", I received the same error message.
It's beginning to do my head in, but will see if replacing the SATA cable will make any difference. If it doesn't, I'll hazard a guess it could be the Logic Board.
Thanks again for your suggestions!
L.

Cannot allocate memory error in Oracle 10.2.0.2

I am using Oracle 10.2.0.2. When will I get the below error. What to do to resolve this issue. Can somebody help me on this
ROW-00001: Cannot allocate memory||SQLSTATE0=03/18/08 14:27:19
ROW-00001: Cannot allocate memory||SQLSTATE0=03/18/08 14:27:19
ROW-00001: Cannot allocate memory||SQLSTATE0=03/18/08 14:27:19
ROW-00001: Cannot allocate memory||SQLSTATE0=03/18/08 14:28:17Thanks in advance

ROW-00001 Cannot allocate memory
Cause: There is not enough memory to run the application.
Action: Close unneeded applications or increase the virtual memory.
Or
Note:387818.1 - did this metalink note help you?

Oracle 8i listener issue: TNS-01168: Cannot allocate memory

We have a loader application coded in perl/c which connects to DB to load data from flat files. Whenever we have multiple such loader programs running, the listener dies and loading stops. The listener.log is around 2GB. I opened the loag and got following details:
Listener Log file (2GB file):
-- File begining ---
ECHO is on.
17-FEB-2005 20:40:20 * service_update * scanview * 0
17-FEB-2005 20:50:20 * service_update * scanview * 0
17-FEB-2005 21:00:10 * (CONNECT_DATA=(SERVICE_NAME=scanview)(CID=(PROGRAM=C:\Perl\bin\perl.exe)(HOST=AZSACTAPP107)(USER=grp_scanview))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.164.17)(PORT=2659)) * establish * scanview * 0
19-FEB-2005 03:14:26 * service_update * scanview * 0
19-FEB-2005 04:00:09 * (CONNECT_DATA=(SERVICE_NAME=scanview)(CID=(PROGRAM=C:\Perl\bin\perl.exe)(HOST=AZSACTAPP107)(USER=grp_scanview))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.164.17)(PORT=2486)) * establish * scanview * 0
19-FEB-2005 04:04:27 * service_update * scanview * 0
19-FEB-2005 04:07:07 * (CONNECT_DATA=(SERVICE_NAME=scanview)(CID=(PROGRAM=C:\Perl\bin\perl.exe)(HOST=AZSACTAPP107)(USER=grp_scanview))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.164.17)(PORT=2644)) * establish * scanview * 0
19-FEB-2005 04:18:21 * 51
Error Started at Line #: 2096
19-FEB-2005 04:18:21 * 51
NL-00051: internal error code, arguments: [302], [1], [], [], [], [], []
Above error continued till Line #: 913372
19-FEB-2005 04:21:15 * 1168
TNS-01168: Cannot allocate memory
19-FEB-2005 06:05:30 * 1168
TNS-01168: Cannot allocate memory
TNSLSNR for 32-bit Windows: Version 8.1.7.4.0 - Production on 19-FEB-2005 11:13:49
-- File ended ---
Is there a known bug and if so what is the resolution? Will upgrading to Net 9i help?
Let me know if anyone has faced such issue and the resolution.
Thanks
Satish

alll listeners show the TNS-12531 cannot allocate memory message in the listener.log.Only a single listener is required.
How many listeners run on this system & why more than 1?
oerr tns 12531
12531, 00000, "TNS:cannot allocate memory"
// *Cause: Sufficient memory could not be allocated to perform the desired
// activity.
// *Action: Either free some resource for TNS, or add more memory to the
// machine. For further details, turn on tracing and reexecute the operation.

Urgent help with ORA-01062: unable to allocate memory for define buffer

Hello, Folks!
I have a c++ code that is using OCI API that is running both in
windows and in spark.
(The same c++ code compiled and running in both platforms)
and asking the same query.
In windows, everything is OK but in spark
it failes...
The ORACLE Server is installed on win2003 station
Both client and server ORACLE version is 10.2.0.1.0
The code is running on spark(oracle instant client is installed)
This query is a simple select query that selects only one field
of type VARCHAR2(4000) (the same problem with happen with any
string type field larger than 150 characters)
The error occured when calling for OCIDefineByPos method
when associating an item in a select-list with the type and output
data buffer.
The error message is: ORA-01062: unable to allocate memory for define
buffer
(This error message signifies that I need to use piecewise operation...)
But it happens even if I make this varchar2 field to be of size larger
than 150.
It is not fair to use piecewise fetch for such a small fields sizes.
May be there is not configuration setting that can enlarge this
I know that I wrote here a very superficial description.
If somebody knows something about this issue, please help
Thanks

I had a special luck today after searching the solution per weeks:)I have got a solution.
When I get the size of the oci field, in the following expressioin
l_nResult = OCIAttrGet(l_oParam->pOCIHandle(), OCI_DTYPE_PARAM, &(orFieldMD.m_nSize), NULL, OCI_ATTR_DATA_SIZE, m_oOCIErrInfo.pOCIError());
orFieldMD.m_nSize was of type ub4 but according the manual it must be ub2.
As a result, the number returned was very large (junk?) and I passed this value to OCIDefineByPos
Now I changed the type and everything is working!!!
In windows there is not problem with this expression :)
Thanks
Issahar

My internal drive is NOT showing up in the event library in Final Cut X. I am also getting a "The operation couldn't be completed. Cannot allocate memory" Any ideas? I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8

My internal boot drive is NOT showing up in the Event Library in Final Cut X. My external raid drive is showing up.
I am also getting error message "The operation couldn’t be completed. Cannot allocate memory" when attempting to create a new "event". Any ideas?
If I had a application disk, I would unistall and reinstall FCPX. I am assuming there is a way do do this without a disk - just have not been able to easliy find out how.
I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8
Thanks

Well it did NOT work. Here is a screen capture as FCPX loads showing the drive while it loads. Then when it is loaded, NO drive showing up in the Event Library ( I have turned off the external drive).
ANY ideas . . . . Anybody . . . . APPLE?

How to allocate memory dynamically?

Hello,
I'm dealing with an array of fourteen (1024x8192 pix) images.
Everything works correctly when the images are smaller,
but when I use 1024x8192 ones for the calculations
I run out of memory after 7th image.
So is there a way for me to dynamically allocate memory size?
So that IMAQ,arrays etc. do not keep allocating new space for
data everytime.
Labview memory raises up to 1 300 000K
based on Windows Task Manager and crashes.
I have 2GB memory on this machine.
Best Regards,
Ari

No matter how much memory you have on the machine, you will never be able to use more than 1.5GBytes on a WindowsXP machine. If you got 1.3GBytes, you did well, since the LV code must fit into that 1.5GBytes, as well. The reason is that Windows is a 32 bit operating system and LabVIEW is a 32 bit executable. It has an absolute maximum limit of 4GBytes. Windows reserves the negative numbers for system code. It also reserves the top 512MBytes of the positive 2GBytes for system DLLs. That leaves everything else with 1.5GBytes. Depending on your memory fragmentation and what other code is running, you will be able to use somewhat less than this. So you probably need to rewrite to only load what you are actually using.
For tips on dealing with large memory issues, check out Managing Large Data Sets in LabVIEW.
Good luck. Let us know if we can help more.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Is there a way to dynamically allocate memory in labview?

In the C programming language, there are malloc() and free() functions which, combined with pointers, allow the user application to dynamically allocate memory.

LabVIEW does all of its memory management completely automatically, which is almost always an extermely good thing, and you don't have any real way of controlling it. Normally, memory is reused throughout the application and deallocated when the top level VI is closed. You can use the deallocate VI (in the Advanced pallete) to force a deallocation, but this will only help if you finished with the subVI.
The new version 8.0 also includes an option to decide when a subVI will be loaded into memory, which can also help. Normally, real memory problems in LV only occur when you have very large structures because LV needs a contiguous block of memory to hold its data. For most cases, there are various solutions available.
Do you have any specific problems?
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
Try to take over the world!

Can't restore from .dmg file "cannot allocate memory- error"

Im trying to install OS X 10.6 from an .dmg file because I have trouble with my dvd reader.
I have followed this steps from this thread: https://discussions.apple.com/thread/2764247?start=0&tstart=0
select your .dmg file and open with Disk utility
02. select your Mac os X image from left panel box and then choose restore
03. drag and drop the Mac os image to source
04. drag and drop Mac's partition to destination
05. click restore
I get "cannot restore, cannot allocate memory". Any ideas? Thanks in advance
Mac Pro OS X 1.6.6, 4 discs (one to make fresh install - 2TB WD), 2x2.66Ghz, dual core Intel Xeon

Hi LInc. I tried your choice and succesfully installed over a 16GB pendrive. But could not do that with the 2TB green caviar... I also found that there are some issues with this kind of drive in the fourth bay, so I will change it to see if there is any difference. Cant make it work with TMachine also (known issues there too).

Allocate memory

Similar Messages

Maybe you are looking for