Allocation cycle error

Dear all,
I am getting the following error while doing the allocation cycle run.
"Record KOUOFIDFINOC-RCS4RKIUOO imported as a sender is used as a sender in several segments"
I understand that this error is coming up because of the cost center being used in more than one segment and the sender being credited by more than 100%.
but what is the record in the above error?"KOUOFIDFINOC-RCS4RKIUOO" .
Thanks
srikanth

Hi Enrico
You are not using the functionality in the way it is intended
Distribution cycle is meant to distribute costs from one cost center to another cost center... What you are trying to do is distribute costs between 2 act types of same cost center... Thats not the purpose of Distr Cycle
In your case, you should plan as per your end result.. Calculate these values in excel and upload
Cost Center 100001
Cost Element 101 - Activity SET UP - Fix Cost XXX and Var Cost YYYY (Usually Var cost does not apply to Set up time)
Cost Element 102 - Activity MACH HRS - Fix Cost XXX and Var Cost YYY
Regards
Ajay M

Similar Messages

FI-GL allocation - distribution error: no valid receiver entries exist

When creating an allocation cycle with fixed percentages and distribution defined on own Z-field (exists in table T800D without
checks) we get Message no. GA109 when going to the receiver tracing factor screen.
This happens only when entering a range or set for the receiver. With one unique value we get the tracing factor screen.
This worked before with ranges and sets. As far as we know there are no changes done at the configuration.
What can trigger this error? Something must be changed, but I have no clue what...
Can you give me some tips to help me searching?

Hi Prasada,
I can change the set I use, so I guess it is not locked ?
The set consists of 18 single values, from 1 to 18. So I tried with a set with a range 1 to 18, and also without a set and just a range 1 to 18 but that didn't help.
When I use only 1 value I dont get the error.
Before we did some tests with the same cycle (same segments and sets) and we didn't had the problem.
We have the problem now for more than a week.
Any other suggestions?
Renaat.
UPDATE FYI: we had to activate valdiation on the fields used for the allocation
Strange because we did tests in the sandbox before without these validation on.
Edited by: Renaat Vanhaverbeke on Nov 6, 2009 10:17 AM

Adding segment to allocation cycle

Hi,
Has anyone used the FM KGAL_APPEND_SEGMENT to add segment to an allocation cycle ?? There seems to be some error with the FM. Let me know if anyone has used this FM
Thanks Much.

Hi Pawan,
You can do a where used list of the segement to see whether it is being used anywhere. These errors will come because it is being used elsewhere.
If you still want to change a segement you can do it by creating another version of the Segement.
Thanks
Lakshman

Unable to cycle error log due to lock that will not clear

Hello,
Currently I'm having an issue with cycling the error log on two SQL Server Instances because the file is being used by another process. Simple I know but, when you try to kill the SPID it becomes hung and we are forced to restart the instance, which I want
to avoid at all costs. To give you some background we use sqldm for our monitoring of the databases and received a message that our Error log reached its max size threshold and to cycle the error log. When I executed exec sp_cycle_errorlog I'm told the following
message:
Msg 17049, Level 16, State 1, Procedure sp_cycle_errorlog, Line 9
Unable to cycle error log file from 'J:\MSSQL10.SQL6\MSSQL\Log\ERRORLOG.1' to 'J:\MSSQL10.SQL6\MSSQL\Log\ERRORLOG.2' due to OS error '32(The process cannot access the file because it is being used by another process.)'. A process outside of SQL Server may be
preventing SQL Server from reading the files. As a result, errorlog entries may be lost and it may not be possible to view some SQL Server errorlogs. Make sure no other processes have locked the file with write-only access."
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
Then I ran the following query in instance A and found that sqldm had a active process.
SELECT *
FROM sys.dm_exec_requests a
OUTER APPLY sys.dm_exec_sql_text(a.sql_handle) b
WHERE session_id > 50
and session_id <> @@spid AND( text = 'xp_readerrorlog' OR text = 'sp_cycle_errorlog')
ORDER BY start_time a
Like I said before when I kill the SPID it became hung and remains in a rollback state (the process is not rolling back). My co-worker had this issue before on this same instance and contacted Idera for support, here was their response "The development
team provided an update regarding this case. After reviewing the code, SQLdm only reads the SQL logs information in each collection and does not lock this resource. Given the behavior that you described, this could be a problem of SQL Server 2008"
I believe they're right because we're only seeing this in these two instances. All other instances using sqldm are not reporting this problem which leads me to believe it is MS SQL Server causing it. This is where I'm stuck and that is trying to find out why
there is a lock on this file and for what reason. I used Process explorer yesterday to search for any processes that are using ERRORLOG through the Find DLL and Handle window and there were mulitple processes touching this file. When I looked today I'm seeing
now locks for this file and I still cannot cycle the error log. I ran the slect query above I'm still seeing sqldm SPID in both instances. I'm curious to see if anyone else has had this issue before whether they used sqldm or not. Any information will be helpful
in tracking this issue down.
Thank you in advance.
Process Explorer Search Results
Instance A
Instance B

Hi,
Generally, I use Process Explorer to find out which process is blocking the SQL Server from cycling the error log file. Open search box for ‘errorlog’ or dentify the entries with Handle or DLL as ‘your error log path’. There could be two
or more processes relating to that. One of them should be ‘sqlservr.exe’, and the others should be the culprits. Verify the process, and try to terminate it and then you should be able to run the stored procedure ‘sp_cycle_errorlog’ to cycle the
error log without restarting the SQL Server.
According to the images, there is no process found. I suggest you start the monitor and launch procexp.exe tool again and see if it makes any difference this time. If still no progress, I think you cannot avoid restating.
Thanks.
Tracy Cai
TechNet Community Support

Pl find out the reason for VC Cycle error for vendor 105191

I had checked entire cycle of Valuation Class(MM42), Tax Code(ME12), validity period, MC Code
in the contract as per the proforma invoice 12738 for vendor 105191 - VC Parties, found ok.
Pl find out the reason for VC Cycle error for vendor 105191
" Unable to create consignment commision - FI/CO"
" Interface : inconsistent FI/CO line item data"

I've used the CS6 AUTOMATE|PHOTOMERGE command many times. Today I ended up with the Error 22 message. After reading your message I did a search on my Win7 Pro 64 bit machine and got a number of hits for "scriptingsupport.8li".
1 for CS6 (on my machine)
2 for CS5 (no longer on my machine)
2 for Elements 8 (no longer on my machine but I DO have Elements 10 & 11 on it)
2 for CS# (no longer on my machine)
QUESTION: Should I delete some of these and which? Will deletion(s) suffice?

Anay standard function module or report to read Allocation Cycle

Hi
I am looking for any standard function module / Report to read allocation cycle.
Appriciate your help.
Thanks
Lakshman

Hello Lakshman
Using function module RK_AL_CYCLE_READ you can read allocation cycles.
However, you will need additional fm's in order to read the entire cycle data.
Regards,
Uwe

IDE - Build Cycle Error

I am continually receiving build cycle messages inside the
FLEX2 IDE. I clean the projects - no use. I try going to the
properties panel to resolve the issue, but the prop panel throws an
error message "The currently displayed page contains invalid
values."
and does not allow me to view build paths, etceteras to fix
the cycle errors - no use.
How can I fix what the IDE will not display?

Hi- You certainly shouldn't be getting that "invalid values"
error message. It sounds like something is corrupted in your
workspace.
One thing you can try is to close projects one by one until
the build cycle message goes away or at least changes to something
else. See if you can narrow it down to a particular project. Once
you've narrowed it down you might try recreating that project.
Another thing that would help us help you is to log a bug at
http://bugs.adobe.com/jira .
If you can zip up your workspace and post it that's great, and if
you don't want to publicly post the source code in your projects,
then it would still be helpful just to include the project settings
files that start with a dot.. e.g. .project,
.actionScriptProperties, and .flexProperties, found in each project
folder. That will help us try to reproduce the problem in-house.
Thanks much,
Tom

Close PCA allocation cycle posting periods

Hello all,
I want to close PCA allocation cycles posting periods.We can't control this through OKP1.As SAP allows to post PCA allocation cycles after closure of periods in FI & CO.Hence there is mismatch with data sent to BCS system.
Can anyone advice on closure of PCA allocation cycles posting ?
Thanks in advance!
Kedar

hello,
usr t.code 4ke5

False positive "Wire: is a member of a cycle" error!

Hello, I have a strange problem with implementing IF-THEN conditioning of parts of code. On the attached diagram I would like to put all DAQ tasks in separate IF-THEN blocks to exclude them from a DAQ if no channels of their are invloved. However, LV2011SP1f1 does not allow me to do that with error: "Wire: Is a member of a cycle" Obviously that is not the case, I am just passing error clusters through it. Am I missing something here or is it a bug? Thanks in advance,
Attachments:
figure.png ‏88 KB

Hi golubovski,
yes, there's a cycle: the error cluster between the two case structures form a cycle.
The upper case of both has two tunnels: one is an output, the second one is an input. Both are connected to the lower case structure, again forming in-/output. LabVIEW can run the upper case structure only, when all inputs are ready. But the second input is only ready after running that case - cycle error...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Recurring Job for Allocation cycle reversal

Dear colleagues,
I want to create a recurring job for FI allocation cycles Reversal but I cannot find any transaction or program that can be executed through the SM36 for such purpose.
The only way to do this reversal is to execute the transcation FAGLGA35 and to navigate to the menu tin order to select the option "-> Reverse".
Has any one of you a tip for that or do you confirm that I need to create a specific program for such requirement?
Thank you in advance
Pascal.

Workflow is the only option

What is allocation cycles...?

Hi gurus,
I am new to allocation in FI and have no knowledge in the same...Can some of u experts provide me detailed info on the same in simple terms...
Also what is cycle definition, cycle run...please explain me from scratch...
Will really appreciate ur help. and guidance...
Cheers:Sam

Please rewrd points if helpfull.
Allocations enable you to periodically allocate amounts and quantities from sender objects to receiver objects. The two main types of allocations are assessment and distribution. You can allocate both plan and actual data. You perform the allocation using the allocation cycle function. You use allocation rules to determine how amounts and quantities should be allocated from sender object to receiver object. It is possible to assess/distribute amounts and quantities according to the following criteria, for example:
● Sales costs
● Sales for a particular period
Allocation TypDistribution
Amounts and quantities of one or more sender objects are distributed to one or more receiver objects, The debit and credit postings for the distribution occur under the original account/original cost element with which the amounts and quantities are posted at the sender. The information of the original account/original cost element remains intact.
The distribution can be performed with actual and plan data.
e
Assessment
AssessmentThe assessment works in the same way as the distribution. However, with the assessment, the debit and credit postings do not occur under the original account or the original cost element but under an assessment account or an assessment cost element. The information of the original account/original cost element are lost.
The assessment can be performed with actual and plan data.
Assessment
With an assessment, both sender and receiver amounts are posted to an assessment account.
The allocation is performed as follows:
 1. Assessment account 600000 accumulates the balances of the accounts (510000, 520000, and 530000).
 2. Assessment account 600000 equally allocates the balance from the utilities accounts (EUR 1,500) to EDP (profit center 100), Sales (profit center 300), and Marketing (profit center 400).
 3. The amount EUR 500 is debited from each of the receiving profit centers in account 600000.
 4. The assessment account 600000 is credited with the amount EUR 1,500.
DistributionWhen you perform a distribution, you allocate the balance from the original sender to the receiver. During the distribution, the original sender account is credited and the receiver account debited.
The allocation is processed as follows:
 1. The amounts of the sender accounts (510000, 520000, 530000) are distributed equally to EDP (profit center 100), Sales (profit center 300), and Marketing (profit center 400).
 2. The amount EUR 500 is charged to each of the receiving profit centers in accounts 510000, 520000, and 530000. The original account is therefore retained.
 3. The accounts 510000, 520000, and 530000 of the Administration profit center are credited.

SAP Allocation cycle Set Creation

Hello Experts,
We are executing Planning allocation cycle in FAGLGA4b.
In allocation cycle we have created, we have given a set in Sender list.
This set is for 6 port (custom Dimension), numbers are not in range. for e.g. 1 2 3 4 5 6 7 8 9 10
Set is for 1, 3, 5, 7 , 9, 10.
When we put one value in set say port 1, its working fine. But if we put a range or insert
Individual ports in each line item, it does not work.
From To
1 10
From To
1 1
3 3
5 5
7 7
9 9
10 10
Any combination is not working except single value.
Guys please help me out for this why its not working
Regards
Zunaid

Didn't quite understand your question. Well, the t code to create sets is GS01, if that is what you are looking for.

Distribution Cycle error: "No Senders have been found"

Hello,
I have created a distribution cycle in FAGLGA31 with three segments with the following criteria,
Sender:
Account, Profit Centre C postings and Functional Area YB20
Receiver:
function area YB20, profit center A: 80%
functional area YB20, profit center B 20%
Likewise I have the other 2 segments with different % of distribution.
But when I am trying to execute the cycle in FAGLGA35, i am getting the error message that "no sender has been found". Please find below the details of the error message. I have checked the cycle completely and all the relevant master data exists. Also transactional data relating to document type SA also exists in the system.
Cycle 0L2050, start date 20110101, does not include any senders.
Message no. GA749
Diagnosis
No senders were found for cycle 0L2050, starting date 20110101.
System Response
It is no longer possible to create receivers and assign senders for the segment.
Procedure
Check the definition of the cycle in the maintenance transaction for Actual Distribution: General Ledger. No valid sender cost centers could be found to match your selection.
If you use the sender rules "Posted amounts" or "Posted quantities", check whether records exist in the database for the criteria you entered (cost element, version...)
During indirect activity allocation with the sender rule "posted quantities", you should also note that only the difference between the planned/posted activity allocation and the scheduled activity quantity is allocated. If you entered activity types as sender, you should at this point also check the activity type category. For those quantities posted with an activity type of category 1 (manual entry, manual allocation) no indirect activity allocation is possible.
1. If this is an allocation in the FI/FI-SL area, the problem could also be due to the inheritance logic for FI-SL totals tables, whose "Inheritance of sender based on the receiver" indicator is activated in the "Partner object update" view (T811U-INHERSRC). These are tables that were installed before Release 4.6A.
Use transaction GCA8 to check this, and see the section on:
Inheritance Logic for Allocations
then correct the affected cycle, if required.
Request help on how to correct this.

Dear Latha,
the most common reason for error message GA749 in NewGL allocation is
that wrong "version" is specified in cycle header. Actual data in NewGL
is stored with version 001 (RVERS), so please make sure this value is
specified on cycle header, instead of 000, for example.
I hope this can help.
Mauri

Distribution cycle Error

Hi
When I run the distribution cycle i am getting the error message " the segment contails no receivers" our version is ECC 5.0, is there any correction or any OSS notes would help to fix this error, i checkded the OSS but all the corrections are for previous versions
Appreciate for any help.
Thank you.

If this is the problem relating to distributing based on Net Sales, what have you defined as your receivers?
The way distribution based on Net Sales works is:
1. It looks for the Tracing Factor - in your case, it is Actual Statistical Posting.
2. It checks to see if the Receivers have any such postings - so if you are distributing costs from one Cost Centre to another Cost Centre, make sure the receiving Cost Centre has some Actual Statistical Postings of Revenue (which should again match the Cost Elements you defined for the Tracing Factor).
3. It then calculates the amount to be Distributed based on the Net Sales values in the receiving Cost Centre and the Receiver Tracing Factor weightage defined by you - thus, if you allocated 10% as the weightage and the Net Sales value in the Cost Centre is $3000, it will allocate $300 to that Cost Centre.
If you are getting a no valid receivers error, try posting some Actual Revenues to the Receiving Cost Centre before you run your distribution.
Cheers.

(STO Cycle) Error in MIGO due to non-maintenance of Chapter ID

Hello,
We have a Stock Transport Order between Plant(Supplying Plant) & Depot(Receiving Plant) Cycle(2 Step) Scenario, where we do the following steps :
1. Created PO through ME21N
2. Created Outbound Delivery through VL10B.
3. Do PGI through VL02N.
4. Created Proforma Invoice through VF01.
5. Created Excise Invoice through J1IIN.(Before J1IIN Chapter ID was not maintained)
6. In Good Receipt MIGO, when we entered the Outbound Delivery, the system copies the Chapter ID in the Item level of Excise Item Tab. ( After J1IIN Chapter ID was maintained in J1ID)
7. Entered the Excise Invoice in Excise Invoice Tab in MIGO.
8. System resets the Chapter Id in MIGO Item Level to blank.
9. Now clicking on Check tab system gives Error message "Enter Chapter ID for the material 000000000025000046" Message no. 8I119
10. So we are not able to do MIGO Goods Receipt.
Please suggest.
Regards
Subrat
M-09981923902

hi
GO to material master, foreign trade data, control code, see what is maintained there.
Now check your J1ID , check if you have maintained for the same control code here or not.
If not maintain it, it will be fixed.
hope it is helpful to u.

Allocation cycle error

Similar Messages

Maybe you are looking for