Allocation in ECC6.0 NewGL

In NewGL, release ECC6.0, I'm trying to understand if I can define a Statistical Key Figure for more dimensions (standard or custom fileds) and how (Report Painter?)?
Let me know. Thanks.

Hi
You can define custom fields in New GL in ECC 6.0 instead of SKF for dimensions other than profit center, segment, business area, plant etc., and you can use the same in report painter also.
You can check up in the following config:-
Financial Accounting (New)->Financial Accounting Global Settings (New)->Ledgers->Fields
Regards,
Suraj

Similar Messages

Newgl data source

We are in BPC7NW and need to extract the data for consolidaiton purposes.extracting the data from ECC6(NEWGL).
For the best data source to extract the consolidation data?
Has anyone been implementing the consolidation in BPC7NW?
Please share your thoughts and experience?

You should check out the [EPM How-to Guides|https://wiki.sdn.sap.com/wiki/display/BPX/EnterprisePerformanceManagement%28EPM%29How-to+Guides].
Specifically there are two very relevant to your inquiry.
1) [How-to Setup Extraction of Balances for BPC NW 7.0|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0b0ae66-071d-2c10-5dab-89349a9dc40d]
2) [How-to Setup Consolidation Environment BPC NW 7.0|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b25a12-7082-2b10-5c86-c227b9397fb3]
Best regards,
[Jeffrey Holdeman|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/jeffrey+holdeman]
SAP BusinessObjects
Enterprise Performance Management
Regional Implementation Group

Delta Allocations in NewGL, ECC6.0

In a NewGL cylce, can I allocate Delta values? I can make it in BW.
Thank you

Hi
Try T.code OXK3
Regards
A

FAGSLKF in ECC6.0 - NewGL

In ECC6.0 - NewGL, I'm trying to insert a new layout FAGSLKF. Because I'd like insert Statistical Key Figure values for each combinations of dimensions. How can I make it?
Can I insert a custom field like dimension???
Let me know, thank you.

Hi
You can define custom fields in New GL in ECC 6.0 instead of SKF for dimensions other than profit center, segment, business area, plant etc., and you can use the same in report painter also.
You can check up in the following config:-
Financial Accounting (New)->Financial Accounting Global Settings (New)->Ledgers->Fields
Regards,
Suraj

SAP MMC disk + work Stop(Ecc6( Adap+jav),win 2003 -32 bit , oracle-10.2)

Hi Friends,
I hope somebody can help.
I have an Ides Ecc6(java+adap) installation on Oracle 10..*.os win 2003 32 bit
Then I try to start the System in mmc the dispatcher is stopping (first yeloow then grey) and no error messages
when is see sys log in SAP MMC
erro: SAP-Basis System: Initialization DB-Connect Failed, Return Code 000256
when i try R3trans-d
Log:
C:\Documents and Settings\accadm>r3trans -d
This is r3trans version 6.14 (release 700 - 15.06.07 - 15:50:00)
unicode enabled version
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function: db_ntab
2EETW000 fcode: NT_RDTDESCR
2EETW000 tabname: TADIR
2EETW000 len (char): 5
2EETW000 key: TADIR
2EETW000 retcode: 2
r3trans finished (0012)
Dev_wo.lo file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Apr 16 14:07:43 2009
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno 00
M sid ACC
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3724
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3724) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Thu Apr 16 14:07:44 2009
M DpShMCreate: sizeof(wp_adm) 18672 (1436)
M DpShMCreate: sizeof(tm_adm) 4232256 (21056)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1536)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06810040, size: 4892312)
M DpShMCreate: allocated sys_adm at 06810040
M DpShMCreate: allocated wp_adm at 06812090
M DpShMCreate: allocated tm_adm_list at 06816980
M DpShMCreate: allocated tm_adm at 068169B0
M DpShMCreate: allocated wp_ca_adm at 06C1FDF0
M DpShMCreate: allocated appc_ca_adm at 06C25BB0
M DpShMCreate: allocated comm_adm at 06C27AF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06CA89B0
M DpShMCreate: allocated gw_adm at 06CA89F0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06CA8A20
M DpShMCreate: allocated wall_adm at 06CA8A28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host oiam
M
M Thu Apr 16 14:07:46 2009
M calling db_connect ...
C Prepending D:\usr\sap\ACC\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06DF1478 06DF6A14 06DF629C
C Attaching to DB Server ACC (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4)
C Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
C Now '/@ACC' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=06DF61E8,usrhp=06E53768)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06DF1478 06DF6A14 06DF629C
C Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
C Now 'SAPSR3/<pwd>@ACC' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance ACC is running on OIAM with ORACLE version 10.2.0.1.0 since APR 16, 2009, 14:07:26
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090416 140746 OIAM
C OCI-call failed with -1=OCI_ERROR
C SQL error 376: 'ORA-00376: file 25 cannot be read at this time
C ORA-01110: data file 25: 'D:\ORACLE\ACC\SAPDATA1\SR3_22\SR3.DATA22''
C *** ERROR => Error 376 in stmt_fetch() from oci_execute_stmt(), orpc=0
[dbsloci.c 12714]
C *** ERROR => ORA-376 occurred when executing SQL stmt (parse error offset=0)
[dbsloci.c 12733]
C sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS
C SELECT VERSION FROM SVERS ;
C sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=06E0FC68
C IN : cols=0,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=144,vmax=32,bound=1,iobuf_p=003F2DC8,vda_p=06E1C3A8
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT VERSION FROM SVERS ;
B ***LOG BZA=> table SVERS does not exist on database [dblink#3 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server oiam_ACC_00 on host oiam (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Apr 16 14:07:46 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10486
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3724) [dpnttool.c 327]
thanks for support
keshava

Hi Rohit
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ACC
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, Unicode, optimized
pid 3452
Fri Apr 17 14:17:27 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3452) [dpxxdisp.c 1239]
 shared lib "dw_xml.dll" version 111 successfully loaded
 shared lib "dw_xtc.dll" version 111 successfully loaded
 shared lib "dw_stl.dll" version 111 successfully loaded
 shared lib "dw_gui.dll" version 111 successfully loaded
 shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Apr 17 14:17:32 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0225.qqq.nxst) took 5 seconds
Fri Apr 17 14:17:36 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >oiam_ACC_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1536)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06810040, size: 4892312)
DpShMCreate: allocated sys_adm at 06810040
DpShMCreate: allocated wp_adm at 06812090
DpShMCreate: allocated tm_adm_list at 06816980
DpShMCreate: allocated tm_adm at 068169B0
DpShMCreate: allocated wp_ca_adm at 06C1FDF0
DpShMCreate: allocated appc_ca_adm at 06C25BB0
DpShMCreate: allocated comm_adm at 06C27AF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06CA89B0
DpShMCreate: allocated gw_adm at 06CA89F0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06CA8A20
DpShMCreate: allocated wall_adm at 06CA8A28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Apr 17 14:17:37 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3652
argv[0] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1045
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=ACC
argv[7] = -DSAPMYNAME=oiam_ACC_00
argv[8] = -DSAPPROFILE=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( oiam) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >oiam_ACC_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Fri Apr 17 14:17:38 2009
DpJ2eeLogin: j2ee state = CONNECTED
Fri Apr 17 14:18:25 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Fri Apr 17 14:19:53 2009
J2EE server info
start = TRUE
state = ACTIVE
pid = 3652
http = 50000
https = 50001
load balance = 1
start_lazy = 0
start_control = SAP J2EE startup framework

In linux install ECC6 + MAXDB error, please look at the help, thank you

This is the log file sapinst.log the last few lines
INFO 2008-12-03 07:22:54.106
Disconnect from message server (SAPSH/3900) succeeded.
INFO 2008-12-03 07:22:54.295
State of instance QD1/DVEBMGS00 changed from ABAP: UNKNOWN to ABAP: UNKNOWN.
INFO 2008-12-03 07:23:24.346
Connect to message server (SAPSH/3900) succeeded.
INFO 2008-12-03 07:23:24.347
Disconnect from message server (SAPSH/3900) succeeded.
INFO 2008-12-03 07:23:24.349
Connect to message server (SAPSH/3900) succeeded.
INFO 2008-12-03 07:23:24.349
Disconnect from message server (SAPSH/3900) succeeded.
INFO 2008-12-03 07:23:24.512
State of instance QD1/DVEBMGS00 changed from ABAP: STARTING to ABAP: STARTING.
WARNING[E] 2008-12-03 07:23:24.545
CJS-30105 Instance QD1/DVEBMGS00 reached state UNKNOWN after having state STARTING. Giving up.
ERROR 2008-12-03 07:23:24.875
*FCO-00011 The step start with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind
|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start was executed with status ERROR .*
I used LINUX is a bit X86-64
The database is MAXDB 7. 6. 03
SAP is ECC6 SR3
JAVA version is IBMJAVA 1. 4. 2_10
In installing the system, the need to upgrade some of the RPM package
SAP and then set up the necessary environment variables and parameters
Next to start the installation MAXDB, until the installation is complete, very smooth.
Finally, start the installation to install ECC6 in error when START INSTANCE
Who can help me take a look, thank you

System: linux-x86_64bit
MAXDB version: 7.6.03
JAVA version: IBMJAVA 1.4.2_10
I first installed the system LINUX, and then set variables and parameters, followed by the installation of JAVA, set the environment variable JAVA. Finally, start the installation ECC6 SR3, ECC6 SID and MAXDB SID I became a full set QD3, a very smooth start the installation until the START INSTANCE this step, the system error
The following is a log error
sapinst.log
INFO 2008-12-05 01:15:10.553
Disconnect from message server (SAPSH/3900) succeeded.
INFO 2008-12-05 01:15:40.748
Connect to message server (SAPSH/3900) succeeded.
INFO 2008-12-05 01:15:40.749
Disconnect from message server (SAPSH/3900) succeeded.
INFO 2008-12-05 01:15:40.751
Connect to message server (SAPSH/3900) succeeded.
INFO 2008-12-05 01:15:40.751
Disconnect from message server (SAPSH/3900) succeeded.
WARNING[E] 2008-12-05 01:15:40.922
CJS-30149 ABAP processes of instance QD3/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:30 minutes. Giving up.
ERROR 2008-12-05 01:15:41.232
FCO-00011 The step start with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11
|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start was executed with status ERROR .
sapinst_dev.log
TRACE 2008-12-05 01:15:40.910
NWException thrown: nw.progress.waitingForStartABAPFailed:
ABAP processes of instance QD3/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:30 minutes. Giving up.
TRACE 2008-12-05 01:15:40.922
Function setMessageIdOfExceptionMessage: nw.progress.waitingForStartABAPFailed
WARNING[E] 2008-12-05 01:15:40.922
 CJSlibModule::writeError_impl()
CJS-30149 ABAP processes of instance QD3/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:30 minutes. Giving up.
TRACE 2008-12-05 01:15:40.937 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE 2008-12-05 01:15:41.023 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 18724
TRACE 2008-12-05 01:15:41.119 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 18725
ERROR 2008-12-05 01:15:41.232 [sixxcstepexecute.cpp:951]
FCO-00011 The step start with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11
|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start was executed with status ERROR .
TRACE 2008-12-05 01:15:41.246 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP ERP 6.0 Support Release 3 > SAP Systems > MaxDB > Central System > Central System. You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to /tmp/sapinst_instdir/ERP/SYSTEM/ADA/CENTRAL/AS. </body></html>
TRACE 2008-12-05 01:15:41.246 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
I had to see dev_disp, dev_rd, dev_w0 this document 3 inside information without warning or error message
dev_disp
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 00
sid QD3
systemid 390 (AMD/Intel x86_64 with Linux)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 18637
Fri Dec 5 01:05:16 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 18637) [dpxxdisp.c 1243]
 shared lib "dw_xml.so" version 144 successfully loaded
 shared lib "dw_xtc.so" version 144 successfully loaded
 shared lib "dw_stl.so" version 144 successfully loaded
 shared lib "dw_gui.so" version 144 successfully loaded
 shared lib "dw_mdm.so" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Dec 5 01:05:17 2008
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAPSH_QD3_00 <
DpShMCreate: sizeof(wp_adm) 25160 (1480)
DpShMCreate: sizeof(tm_adm) 5748600 (28600)
DpShMCreate: sizeof(wp_ca_adm) 28800 (96)
DpShMCreate: sizeof(appc_ca_adm) 9600 (96)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (2008)
DpShMCreate: sizeof(wall_adm) (40056/36728/80/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x7f3bb0384000, size: 6446000)
DpShMCreate: allocated sys_adm at 0x7f3bb0384000
DpShMCreate: allocated wp_adm at 0x7f3bb03861b8
DpShMCreate: allocated tm_adm_list at 0x7f3bb038c400
DpShMCreate: allocated tm_adm at 0x7f3bb038c460
DpShMCreate: allocated wp_ca_adm at 0x7f3bb0907bd8
DpShMCreate: allocated appc_ca_adm at 0x7f3bb090ec58
DpShMCreate: allocated comm_adm at 0x7f3bb09111d8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x7f3bb0996eb8
DpShMCreate: allocated gw_adm at 0x7f3bb0996f38
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x7f3bb0996f68
DpShMCreate: allocated wall_adm at 0x7f3bb0996f70
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation map
<EsMap> EsMapUnamFileMapInit: Initialize the memory 1968 MB
Linux: Kernel supports shared memory disclaiming
Linux: using madvise(<pointer>, <size>, 9).
Linux: disclaiming for shared memory enabled
<ES> 491 blocks reserved for free list.
ES initialized.
Fri Dec 5 01:07:17 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( SAPSH) [dpxxdisp.c 11822]
DP_FATAL_ERROR => DpMsAttach: local hostname 'SAPSH' is resolved to loopback address (cf. SAP note 1054467 for details)
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
kill(18646,0) successful -> process alive
killing W0-18646 (SIGUSR2)
kill(18647,0) successful -> process alive
killing W1-18647 (SIGUSR2)
kill(18648,0) successful -> process alive
killing W2-18648 (SIGUSR2)
kill(18696,0) successful -> process alive
killing W3-18696 (SIGUSR2)
kill(18698,0) successful -> process alive
killing W4-18698 (SIGUSR2)
kill(18711,0) successful -> process alive
killing W5-18711 (SIGUSR2)
kill(18712,0) successful -> process alive
killing W6-18712 (SIGUSR2)
kill(18713,0) successful -> process alive
killing W7-18713 (SIGUSR2)
kill(18715,0) successful -> process alive
killing W8-18715 (SIGUSR2)
kill(18716,0) successful -> process alive
killing W9-18716 (SIGUSR2)
kill(18717,0) successful -> process alive
killing W10-18717 (SIGUSR2)
kill(18718,0) successful -> process alive
killing W11-18718 (SIGUSR2)
kill(18719,0) successful -> process alive
killing W12-18719 (SIGUSR2)
kill(18720,0) successful -> process alive
killing W13-18720 (SIGUSR2)
kill(18721,0) successful -> process alive
killing W14-18721 (SIGUSR2)
kill(18722,0) successful -> process alive
killing W15-18722 (SIGUSR2)
kill(18723,0) successful -> process alive
killing W16-18723 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:27 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Dec 4 17:07:27 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 18646 Run no 0 0 0
1 DIA 18647 Run no 0 0 0
2 DIA 18648 Run no 0 0 0
3 DIA 18696 Run no 0 0 0
4 DIA 18698 Run no 0 0 0
5 DIA 18711 Run no 0 0 0
6 DIA 18712 Run no 0 0 0
7 DIA 18713 Run no 0 0 0
8 DIA 18715 Run no 0 0 0
9 DIA 18716 Run no 0 0 0
10 UPD 18717 Run no 0 0 0
11 ENQ 18718 Run no 0 0 0
12 BTC 18719 Run no 0 0 0
13 BTC 18720 Run no 0 0 0
14 BTC 18721 Run no 0 0 0
15 SPO 18722 Run no 0 0 0
16 UP2 18723 Run no 0 0 0
Dispatcher Queue Statistics Thu Dec 4 17:07:27 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
4
4
2000
4
0
--------++++--
+
DIA
1
1
2000
1
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 5
wake_evt_udp_now 1
wake events total 5, udp 1 ( 20%), shm 4 ( 80%)
since last update total 5, udp 1 ( 20%), shm 4 ( 80%)
Dump of tm_adm structure: Thu Dec 4 17:07:27 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Dec 4 17:07:27 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:32 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPSH_QD3_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_OFF
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 3/0 done
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 1/4096 done
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
kill(18646,0) successful -> process alive
kill(18647,0) successful -> process alive
kill(18648,0) successful -> process alive
kill(18696,0) successful -> process alive
kill(18698,0) successful -> process alive
kill(18711,0) successful -> process alive
kill(18712,0) successful -> process alive
kill(18713,0) successful -> process alive
kill(18715,0) successful -> process alive
kill(18716,0) successful -> process alive
kill(18717,0) successful -> process alive
kill(18718,0) successful -> process alive
kill(18719,0) successful -> process alive
kill(18720,0) successful -> process alive
kill(18721,0) successful -> process alive
kill(18722,0) successful -> process alive
kill(18723,0) successful -> process alive
Stop work processes
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:33 2008
NiISelect: TIMEOUT occured (1000ms)
wait for end of exclusive shutdown
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:34 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18646,0) successful -> process alive
kill(18647,0) successful -> process alive
kill(18648,0) successful -> process alive
kill(18696,0) successful -> process alive
kill(18698,0) successful -> process alive
kill(18711,0) successful -> process alive
kill(18712,0) successful -> process alive
kill(18713,0) successful -> process alive
kill(18715,0) successful -> process alive
kill(18716,0) successful -> process alive
kill(18717,0) successful -> process alive
kill(18718,0) successful -> process alive
kill(18719,0) successful -> process alive
kill(18720,0) successful -> process alive
kill(18721,0) successful -> process alive
kill(18722,0) successful -> process alive
kill(18723,0) successful -> process alive
wait for end of exclusive shutdown
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:35 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18646,0) successful -> process alive
kill(18647,0) successful -> process alive
kill(18648,0) successful -> process alive
kill(18696,0) successful -> process alive
kill(18698,0) successful -> process alive
kill(18711,0) successful -> process alive
kill(18712,0) successful -> process alive
kill(18713,0) successful -> process alive
kill(18715,0) successful -> process alive
kill(18716,0) successful -> process alive
kill(18717,0) successful -> process alive
kill(18718,0) successful -> process alive
kill(18719,0) successful -> process alive
kill(18720,0) successful -> process alive
kill(18721,0) successful -> process alive
kill(18722,0) successful -> process alive
kill(18723,0) successful -> process alive
wait for end of exclusive shutdown
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:38 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18646,0) -> ESRCH: process died
kill(18647,0) -> ESRCH: process died
kill(18648,0) -> ESRCH: process died
kill(18696,0) -> ESRCH: process died
kill(18698,0) -> ESRCH: process died
kill(18711,0) -> ESRCH: process died
kill(18712,0) -> ESRCH: process died
kill(18713,0) -> ESRCH: process died
kill(18715,0) -> ESRCH: process died
kill(18716,0) -> ESRCH: process died
kill(18717,0) -> ESRCH: process died
kill(18718,0) -> ESRCH: process died
kill(18719,0) -> ESRCH: process died
kill(18720,0) -> ESRCH: process died
kill(18721,0) -> ESRCH: process died
kill(18722,0) -> ESRCH: process died
kill(18723,0) -> ESRCH: process died
Stop gateway
killing proc (18644) (SOFT_KILL)
Stop icman
killing proc (18645) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
kill(18646,0) -> ESRCH: process died
kill(18647,0) -> ESRCH: process died
kill(18648,0) -> ESRCH: process died
kill(18696,0) -> ESRCH: process died
kill(18698,0) -> ESRCH: process died
kill(18711,0) -> ESRCH: process died
kill(18712,0) -> ESRCH: process died
kill(18713,0) -> ESRCH: process died
kill(18715,0) -> ESRCH: process died
kill(18716,0) -> ESRCH: process died
kill(18717,0) -> ESRCH: process died
kill(18718,0) -> ESRCH: process died
kill(18719,0) -> ESRCH: process died
kill(18720,0) -> ESRCH: process died
kill(18721,0) -> ESRCH: process died
kill(18722,0) -> ESRCH: process died
kill(18723,0) -> ESRCH: process died
wait for end of gateway
kill(18644,0) successful -> process alive
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:39 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18644,0) -> ESRCH: process died
wait for end of icman
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:40 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:41 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:42 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:43 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:44 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:45 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:46 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:47 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:48 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:49 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:50 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) -> ESRCH: process died
DpStartStopMsg: send stop message (myname is >SAPSH_QD3_00 <)
NiIMyHostName: hostname = 'SAPSH'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
MsIBufAlloc: allocated buffer
NiIRead: hdl 2 received data (rcd=458,pac=1,MESG_IO)
NiBufIIn: NIBUF len=458
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 458 bytes
MSG received, len 110+348, flag 4, from SAPSH_QD3_00 , typ 0, key FFFFFFFF00000000
DpHalt: received 348 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Fri Dec 5 01:07:51 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelPSet: set events of sock 11 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelPRemove: removed last sock 11 (pos=3)
NiSelIRemove: removed hdl 2
NiICloseHandle: shutdown and close hdl 2 / sock 11
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EsCleanup destroy slot 0
<EsMap: unlink /SAP_ES_00_000
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x0x5425b70 )
ShmKeyPermission( 76 ) = 0740 (octal)
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0x7fffc33c4cc0 )
ShmProtect( 1, 3 )
ShmProtect( key 1 valid )
ShmProtect( slot Index 0 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 1 prot 3/0 done
ShmCreate( 1, 0, 2, -> 0x0x7f3bbb3c5000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0x7fffc33c4cc0 )
Fri Dec 5 01:07:52 2008
ShmProtect( 2, 3 )
ShmProtect( key 2 valid )
ShmProtect( slot Index 1 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 2 prot 3/0 done
ShmCreate( 2, 0, 2, -> 0x0x7f3bb0384000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0x7fffc33c4cc0 )
ShmProtect( 3, 3 )
ShmProtect( key 3 valid )
ShmProtect( slot Index 2 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 3 prot 3/0 done
ShmCreate( 3, 0, 2, -> 0x0x7f3baf70f000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmProtect( 4, 3 )
ShmProtect( key 4 valid )
ShmProtect( slot Index 3 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 4 prot 3/0 done
ShmCreate( 4, 0, 2, -> 0x0x7f3bb091f000 )
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 10, 14, 0, 2, 0x0x7fffc33c4bd8 )
ShmGet( 10, 14, 0, 2, -> 0x0x7f3bb1426000 )
ShmProtect( 14, 3 )
ShmProtect( key 14 valid )
ShmProtect( slot Index 13 )
ShmProtect: Key=14 not attached
ShmProtect( 14, 3 )
ShmProtect( key 14 valid )
ShmProtect( slot Index 13 )
ShmProtect( Mode: -10 )
ShmProtect( SegSlotIdx: 13 )
ShmCreate( 14, 0, 2, -> 0x0x7f3bb1426000 )
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 10, 11, 0, 2, 0x0x7fffc33c4bd8 )
ShmGet( 10, 11, 0, 2, -> 0x0x7f3bb5bfa000 )
ShmProtect( 11, 3 )
ShmProtect( key 11 valid )
ShmProtect( slot Index 10 )
ShmProtect: Key=11 not attached
ShmProtect( 11, 3 )
ShmProtect( key 11 valid )
ShmProtect( slot Index 10 )
ShmProtect( Mode: -10 )
ShmProtect( SegSlotIdx: 10 )
ShmCreate( 11, 0, 2, -> 0x0x7f3bb5bfa000 )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmProtect( 19, 3 )
ShmProtect( key 19 valid )
ShmProtect( slot Index 18 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 19 prot 3/0 done
ShmCreate( 19, 0, 2, -> 0x0x7f3bab855000 )
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 33 ) = 0740 (octal)
ShmProtect( 33, 3 )
ShmProtect( key 33 valid )
ShmProtect( slot Index 32 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 33 prot 3/0 done
ShmCreate( 33, 0, 2, -> 0x0x7f3baffe6000 )
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmProtect( 41, 3 )
ShmProtect( key 41 valid )
ShmProtect( slot Index 40 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 41 prot 3/0 done
ShmCreate( 41, 0, 2, -> 0x0x7f3baaee7000 )
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 40, 42, 0, 2, 0x0x7fffc33c4bd8 )
ShmCreate( 40, 0, 2, 0x0x7fffc33c46f8 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmProtect( 40, 3 )
ShmProtect( key 40 valid )
ShmProtect( slot Index 39 )
ShmProtect( Mode: 112000000 )
ShmCreate( 40, 0, 2, -> 0x0x7f3a9e6f1000 )
ShmGet( 40, 42, 0, 2, -> 0x0x7f3aa1057000 )
ShmProtect( 42, 3 )
ShmProtect( key 42 valid )
ShmProtect( slot Index 41 )
ShmProtect: Key=42 not attached
ShmProtect( 42, 3 )
ShmProtect( key 42 valid )
ShmProtect( slot Index 41 )
ShmProtect( Mode: -40 )
ShmProtect( SegSlotIdx: 41 )
ShmCreate( 42, 0, 2, -> 0x0x7f3aa1057000 )
ShmDelete( 40 )
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 40, 43, 0, 2, 0x0x7fffc33c4bd8 )
ShmCreate( 40, 0, 2, 0x0x7fffc33c46f8 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 40, 45, 0, 2, 0x0x7fffc33c4bd8 )
ShmCreate( 40, 0, 2, 0x0x7fffc33c46f8 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 40, 44, 0, 2, 0x0x7fffc33c4bd8 )
ShmCreate( 40, 0, 2, 0x0x7fffc33c46f8 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmCleanup( 54 )
ShmCreate( 54, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 54 ) = 0740 (octal)
ShmProtect( 54, 3 )
ShmProtect( key 54 valid )
ShmProtect( slot Index 53 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 54 prot 3/0 done
ShmCreate( 54, 0, 2, -> 0x0x7f3bb05a9000 )
ShmCleanup SHM_DB_SYNC
ShmCleanup( 46 )
ShmCreate( 46, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 40, 46, 0, 2, 0x0x7fffc33c4bd8 )
ShmCreate( 40, 0, 2, 0x0x7fffc33c46f8 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_CUA_BUFFER
ShmCleanup( 47 )
ShmCreate( 47, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 40, 47, 0, 2, 0x0x7fffc33c4bd8 )
ShmCreate( 40, 0, 2, 0x0x7fffc33c46f8 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OTR_BUFFER
ShmCleanup( 64 )
ShmCreate( 64, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 64 ) = 0740 (octal)
ShmProtect( 64, 3 )
ShmProtect( key 64 valid )
ShmProtect( slot Index 63 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 64 prot 3/0 done
ShmCreate( 64, 0, 2, -> 0x0x7f3bb05a9000 )
ShmCleanup SHM_DB_ESM_BUFFER
ShmCleanup( 65 )
ShmCreate( 65, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 65 ) = 0740 (octal)
ShmProtect( 65, 3 )
ShmProtect( key 65 valid )
ShmProtect( slot Index 64 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 65 prot 3/0 done
ShmCreate( 65, 0, 2, -> 0x0x7f3bb05a9000 )
ShmCleanup SHM_ROLL_AREA_KEY
ShmCleanup( 9 )
ShmCreate( 9, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 9 ) = 0740 (octal)
ShmProtect( 9, 3 )
ShmProtect( key 9 valid )
ShmProtect( slot Index 8 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 9 prot 3/0 done
ShmCreate( 9, 0, 2, -> 0x0x7f3a80899000 )
ShmCleanup SHM_PAGING_AREA_KEY
ShmCleanup( 8 )
ShmCreate( 8, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 8 ) = 0740 (octal)
ShmProtect( 8, 3 )
ShmProtect( key 8 valid )
ShmProtect( slot Index 7 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 8 prot 3/0 done
ShmCreate( 8, 0, 2, -> 0x0x7f3a951c1000 )
ShmCleanup SHM_ROLL_ADM_KEY
ShmCleanup( 17 )
ShmCreate( 17, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 10, 17, 0, 2, 0x0x7fffc33c4bd8 )
ShmGet( 10, 17, 0, 2, -> 0x0x7f3bb185a000 )
ShmProtect( 17, 3 )
ShmProtect( key 17 valid )
ShmProtect( slot Index 16 )
ShmProtect: Key=17 not attached
ShmProtect( 17, 3 )
ShmProtect( key 17 valid )
ShmProtect( slot Index 16 )
ShmProtect( Mode: -10 )
ShmProtect( SegSlotIdx: 16 )
ShmCreate( 17, 0, 2, -> 0x0x7f3bb185a000 )
ShmCleanup SHM_PAGING_ADM_KEY
ShmCleanup( 18 )
ShmCreate( 18, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 18 ) = 0740 (octal)
ShmProtect( 18, 3 )
ShmProtect( key 18 valid )
ShmProtect( slot Index 17 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 18 prot 3/0 done
ShmCreate( 18, 0, 2, -> 0x0x7f3bb0729000 )
ShmCleanup SHM_PXA_KEY
ShmCleanup( 6 )
ShmCreate( 6, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 6 ) = 0740 (octal)
ShmProtect( 6, 3 )
ShmProtect( key 6 valid )
ShmProtect( slot Index 5 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 6 prot 3/0 done
ShmCreate( 6, 0, 2, -> 0x0x7f3a92cc9000 )
ShmCleanup SHM_ENQ_TABLE_KEY
ShmCleanup( 34 )
ShmCreate( 34, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 34 ) = 0740 (octal)
ShmCleanup SHM_ENQID_KEY
ShmCleanup( 58 )
ShmCreate( 58, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 58 ) = 0740 (octal)
ShmCleanup SHM_VB_ADM_KEY
ShmCleanup( 7 )
ShmCreate( 7, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 7 ) = 0740 (octal)
ShmProtect( 7, 3 )
ShmProtect( key 7 valid )
ShmProtect( slot Index 6 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 7 prot 3/0 done
ShmCreate( 7, 0, 2, -> 0x0x7f3bbb3b0000 )
ShmCleanup SHM_ES2_ADM
ShmCleanup( 76 )
ShmCreate( 76, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 76 ) = 0740 (octal)
ShmCleanup SHM_EM_ADM
ShmCleanup( 51 )
ShmCreate( 51, 0, 2, 0x0x7fffc33c4cc0 )
ShmProtect( 51, 3 )
ShmProtect( key 51 valid )
ShmProtect( slot Index 50 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 51 prot 3/0 done
ShmCreate( 51, 0, 2, -> 0x0x7f3bad5e6000 )
ShmCleanup SHM_EM2_ADM
ShmCleanup( 77 )
ShmCreate( 77, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 77 ) = 0740 (octal)
ShmCleanup SHM_EG2_ADM
ShmCleanup( 78 )
ShmCreate( 78, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 78 ) = 0740 (octal)
ShmCleanup SHM_MSBUF
ShmCleanup( 52 )
ShmCreate( 52, 0, 2, 0x0x7fffc33c4cc0 )
ShmProtect( 52, 3 )
ShmProtect( key 52 valid )
ShmProtect( slot Index 51 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 52 prot 3/0 done
ShmCreate( 52, 0, 2, -> 0x0x7f3bbb3b3000 )
ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
ShmCleanup( 30 )
ShmCreate( 30, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 30 ) = 0740 (octal)
ShmProtect( 30, 3 )
ShmProtect( key 30 valid )
ShmProtect( slot Index 29 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 30 prot 3/0 done
ShmCreate( 30, 0, 2, -> 0x0x7f3bbb3bd000 )
ShmCleanup SHM_JAVA
ShmCleanup( 70 )
ShmCreate( 70, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 70 ) = 0740 (octal)
ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
ShmCleanup( 56 )
ShmCreate( 56, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 56 ) = 0740 (octal)
ShmCleanup SHM_PROFILE
ShmCleanup( 57 )
ShmCreate( 57, 0, 2, 0x0x7fffc33c4cc0 )
ShmProtect( 57, 3 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 3/0 done
ShmCreate( 57, 0, 2, -> 0x0x7f3bb95d3000 )
removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0x0x7fffc33c4cb0 )
ShmProtect( 31, 3 )
ShmProtect( key 31 valid )
ShmProtect( slot Index 30 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 31 prot 3/0 done
ShmCreate( 31, 0, 2, -> 0x0x7f3baf18d000 )
ShmCleanup SHM_POOL_0
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0x0x7fffc33c4cc0 )
ShmProtect( 10, 3 )
ShmProtect( key 10 valid )
ShmProtect( slot Index 9 )
ShmProtect( Mode: 136000000 )
ShmCreate( 10, 0, 2, -> 0x0x7f3bb141f000 )
ShmCleanup SHM_DB_POOL
ShmCleanup( 40 )
ShmCreate( 40, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_POOL_50
ShmCleanup( 50 )
ShmCreate( 50, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 50 ) = 0740 (octal)
MiCleanup:
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0x0x7fffc33c4ca0 )
ShmProtect( 62, 3 )
ShmProtect( key 62 valid )
ShmProtect( slot Index 61 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 62 prot 3/0 done
ShmCreate( 62, 0, 2, -> 0x0x7f3aa51c1000 )
MpiCleanup() -> 0
removing Semaphore-Management
closing connect handles (dgm + tcp)
DpDelSocketInfo: del info for socket 0 (type=2)
NiICloseHandle: shutdown and close hdl 0 / sock 8
DpDelSocketInfo: del info for socket 1 (type=1)
NiICloseHandle: shutdown and close hdl 1 / sock 9 - sock 10
***LOG Q05=> DpHalt, DPStop ( 18637) [dpxxdisp.c 10700]
shutdown completed - server stopped ***
Good Bye .....
dev_rd
trc file: "dev_rd", trc level: 1, release: "700"
Fri Dec 5 01:05:17 2008
***LOG S00=> GwInitReader, gateway started ( 18644) [gwxxrd.c 1691]
systemid 390 (AMD/Intel x86_64 with Linux)
relno 7000
patchlevel 0
patchno 137
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 18644
gateway runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
gateway (version=700.2007.10.01)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Bind service sapgw00 (socket) to port 3300
GwPrintMyHostAddr: my host addresses are :
1 : [127.0.0.1] SAPSH (HOSTNAME)
2 : [192.168.0.50] SAPSH (NILIST)
3 : [192.168.122.1] 192.168.122.1 (NILIST)
Full qualified hostname = localhost.localdomain
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Fri Dec 5 01:07:16 2008
DpShMCreate: sizeof(wp_adm) 25160 (1480)
DpShMCreate: sizeof(tm_adm) 5748600 (28600)
DpShMCreate: sizeof(wp_ca_adm) 28800 (96)
DpShMCreate: sizeof(appc_ca_adm) 9600 (96)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (2008)
DpShMCreate: sizeof(wall_adm) (40056/36728/80/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x7f7e67601000, size: 6446000)
DpShMCreate: allocated sys_adm at 0x7f7e67601000
DpShMCreate: allocated wp_adm at 0x7f7e676031b8
DpShMCreate: allocated tm_adm_list at 0x7f7e67609400
DpShMCreate: allocated tm_adm at 0x7f7e67609460
DpShMCreate: allocated appc_ca_adm at 0x7f7e67b8bc58
DpShMCreate: allocated comm_adm at 0x7f7e67b8e1d8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x7f7e67c13eb8
DpShMCreate: allocated gw_adm at 0x7f7e67c13f38
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x7f7e67c13f68
MtxInit: -2 0 0
Fri Dec 5 01:07:38 2008
caught SIGINT (2)
***LOG S30=> GwStopGateway, gateway stopped () [gwxxrd.c 14589]
dev_w0
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid QD3
M systemid 390 (AMD/Intel x86_64 with Linux)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 18646
M
M
M Fri Dec 5 01:05:17 2008
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 18646) [thxxhead.c 1281]
M ThInit: running on host SAPSH
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.144 (Make PL 0.144)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
C (0.144) I5/OS ldappasswd support for 5250 terminal. (note 1129573)
C (0.139) Return DS_SQLERR instead of DS_CONNECTERR (note 1121076)
C (0.131) Do not trace password of SQLOPT into dev trace (note 1097930)
C (0.130) Performance optimization for UPDSTAT PREPARE (note 1096387)
C (0.125) Update statistic prepare on row level (note 1086430)
C (0.104) Update statistic with empty schemas (note 1041547)
C (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
C (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
C (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.3 BUILD 009-123-163-622
C SQLDBC client runtime is MaxDB 7.6.3.009 CL 163622
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.6.03 Build 009-123-163-622
C Database release is SAP DB 7.6.03.009
C INFO : Database 'QD3' instance is running on 'SAPSH'
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPQD3'
C Command info enabled
C Now I'm connected to SAP DB
C 00: SAPSH-QD3, since=20081205010517, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081205 010517 SAPSH
C INFO : SAP RELEASE (DB) = 700
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0x7f3bb1426000, size: 4400000)
M SHM_ROLL_AREA (addr: 0x7f3a80899000, size: 613580800)
M SHM_PAGING_AREA (addr: 0x7f3a70899000, size: 268435456)
M SHM_ROLL_ADM (addr: 0x7f3bb185a000, size: 10683916)
M SHM_PAGING_ADM (addr: 0x7f3bac975000, size: 2622496)
M ThCreateNoBuffer allocated 560152 bytes for 1000 entries at 0x7f3a69dcb000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0x7f3bbb3b0000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation map
X Linux: Kernel supports shared memory disclaiming
X Linux: using madvise(<pointer>, <size>, 9).
X Linux: disclaiming for shared memory enabled
X ES initialized.
B
B Fri Dec 5 01:07:13 2008
B db_con_shm_ini: WP_ID = 0, WP_CNT = 17, CON_ID = -1
B
B Fri Dec 5 01:07:14 2008
B dbtbxbuf: Buffer TABL (addr: 0x7f3baac4d100, size: 30000000, end: 0x7f3bac8e9480)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 14203520
B ***LOG BB0=> buffer TABL started with length 30000000 bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
B dbtbxbuf: Buffer TABLP (addr: 0x7f3a66dfa100, size: 10240000, end: 0x7f3a677be100)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 5030272
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: Opening /usr/sap/QD3/DVEBMGS00/data/tbxstat failed (No such file or directory).
B dbtbxbuf: Opening /usr/sap/QD3/DVEBMGS00/data/tbxnew failed (No such file or directory).
B dbtbxbuf: Renaming /usr/sap/QD3/DVEBMGS00/data/tbxnew to /usr/sap/QD3/DVEBMGS00/data/tbxstat failed (No such file or directory).
B dbtbxbuf: 0 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 464 = 464
B 2: 17 * 40 = 680
B 3: 4001 * 64 = 256064
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13251 * 256 = 3392256
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 0x7f3baa84c108, size: 4194304, end: 0x7f3baac4c108)
B ***LOG BB0=> buffer EIBUF started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 464 = 464
B 2: 17 * 40 = 680
B 3: 4001 * 64 = 256064
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13251 * 256 = 3392256
B Tracing = 0, Shm Protection = 0, F

Error I am getting at ECC6.0 installation

when installing SAP ECC6.0 on Windows Operating system platform I am getting error at SAPAPPL2.Log at C:\programfiles\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS
Unable to allocate 4108 bytes of shared memory.
at SAP Level at IMPORT ABAP I am getting error at phase 19 of 45
Sateesh

My server is 32bit I am able to increase till 4096 only.
At Virtual memory I had given initial size: 1050 and Maximum Size: 4050 and I had saved and started the installation
Now I had checked at RUN command by giving
CSCRIPT C:\WINDOWS\system32\pagefileconfig.vbs
I am able to see.
Host Name: ECC6
Drive/volume: C:
Volume Label: N/A
Location\File: C:\Pagefile.sys
Initial size: 2046 MB
Maximum size: 4092 MB
Current size: 2046 MB
Total Free Space: 23288 MB
Page file mode: custom
Host Name: ECC6
Drive/volume: D:
Volume Label: N/A
Location\File: D:\Pagefile.sys
Initial size: 1050 MB
Maximum size: 4050 MB
Current size: 1050 MB
Total Free Space: 189109 MB
Page file mode: custom
Host Name                 : ECC6
Total (All Drives)      : Minimum Size : 2 MB
Total (All Drives)      : Recommended size: 3058 MB
Total (All Drives)      : Currently Allocated: 3096 MB
how much to give at D:\ drive

Internal Table Memory Allocation

Hello all,
I could understand the difference between Internal Table with occurs 0 and internal table with type declaration...
correct me if i am wrong, occurs 0 declaration occupies 8kb memory and header line 256 bytes...
But what i could not get is...
Where can i view this internal table runtime memory usage?? Should i have to check that in some transaction???
If that is the case, what transaction i should look at?? Can i view this in debugging mode??? I tried GOTO -> STATUS DISPLAY -> MEMORY USE and i have tried even SETTINGS -> MEMORY MONITORING ->MEMORY DISPLAY ON...Nothing worked..
when i go for GOTO -> STATUS DISPLAY -> MEMORY USE in debugging
memory allocated seems to be same for Internal table with occur 0 and Internal table with type declaration
I have searched a lot about this in SDN....But could not come to a conclusion......
I don't have authorisation here for DBG_MEMORY_DIFFTOOL or S_MEMORY_INSPECTOR unfortunately.....
Waiting for your replies....

Hi Jagannathan,
You can view this on Debugger(ECC6.0) onwards.
To find out how much memory internal tables occupy, choose Goto --> Display Condition --> Memory Usage.
Choose Change Settings to display a window, in which you can choose the Internal Tables button.
Hope this will assists you for your quest.
Regards,
-Syed.

Upload Customer Remittance Advice to SAP for auto allocation to invoices

Hi,
Here's the story, we receive excel files from customers that are rather large and I was hoping I could get a proposal together with information on how we can automate the allocation of payments to customer debtor account.
I do not have access to any SAP sites and our IT department is giving me the run around, so I have turned to all of you for some help.
Please remember that I am in the receivables are and all remittances (spreadsheets) get sent to us straight from the customer via e-mail never from the bank.
I am hoping this is enough info for you guys?!?!?
Let me know if you need to know anything else.
Oh and we are working with ECC6.
Thanks
Belinda

There are a couple of options 1) You could implement the SAP lockbox functionality. This is a standard approach and offers automated file upload functions. 2) You could create a custom upload function. I always try to use standard SAP before I try custom. You could basically have a program developed that would take a excel spreadsheet in your company layout and have that uploaded into the system. The customer could send them in your format or you copy paste it to your formated spreadsheet. This is done all the time.
pls assign points to say thanks.

Cross Docking Process Flow - ECC6.0

Hi,
Can some explain what is the process flow for cross docking in ECC 6.0. How to mark a customer as Cross docking customer?
Thi sis the process flow we are trying to map in ECC6.0 for croos docking.Please let me know is this process flow can me mapped in ECC? Thanks
     Goods Receipt
     X-dock temporary bin allocated
     Put-away label printed [X-dock put-away bin]
     Delivery created
     Picking TO created
     Picking TO confirmed
     Packing created
     Delivery Note printed
     Shipping labels printed
     Post Goods Issue posted

Hello,
For Oppertunistic Cross dock..
You need to create either Putaway TO/Pick TO and then system checks the cross doc and cancel the TO and create a new TO from 902 to 916. and also updates in the document flow. This you can do with out Cross dock monitor. With out planning the cross dock you can do the cross docking by following the config in help.sap.com.
for more information about the complete config you need to see the sap link below. sure it will help you.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
thanks.
tkreddy

Ecc6.0 instance dump,ERROR ThSigHandler: signal

Hi Expert,
ECC6.0 instance WP is not starting.
O.S : WINDOWS 2003
DB:Oracle 10g
Kernel: 700
Patch:201
Below is the part of log dev_W0:
trc file: "dev_w0", trc level: 1, release: "700"
I
I Sat Jun 18 13:49:11 2011
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0B560040, size: 4400000)
M SHM_ROLL_AREA (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA (addr: 0B9A0040, size: 32768000)
M SHM_ROLL_ADM (addr: 0D8F0040, size: 633840)
M SHM_PAGING_ADM (addr: 0D990040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0DA20040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 07150040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 0DB40088, size: 536)
B dbntab: Buffer FTAB(anchor array) (addr: 0DB402A0, size: 160036)
B dbntab: Buffer FTAB(item array) (addr: 0DB673C8, size: 720000)
B dbntab: Buffer FTAB(data area) (addr: 0DC17048, size: 30720000)
B dbntab: Buffer IREC(hash header) (addr: 0F970088, size: 536)
B dbntab: Buffer IREC(anchor array) (addr: 0F9702A0, size: 160036)
B dbntab: Buffer IREC(item array) (addr: 0F9973C8, size: 180000)
B dbntab: Buffer IREC(data area) (addr: 0F9C32E8, size: 6144000)
B dbntab: Buffer STAB(hash header) (addr: 10940088, size: 536)
B dbntab: Buffer STAB(anchor array) (addr: 109402A0, size: 160036)
B dbntab: Buffer STAB(item array) (addr: 109673C8, size: 180000)
B dbntab: Buffer STAB(data area) (addr: 109932E8, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 10C90088, size: 1888)
B dbntab: Buffer TTAB(anchor array) (addr: 10C907E8, size: 160036)
B dbntab: Buffer TTAB(item array) (addr: 10CB7910, size: 480000)
B dbntab: Buffer TTAB(data area) (addr: 10D2CC10, size: 5840000)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 12AE9F90)
B dbtbxbuf: Buffer TABL (addr: 150200C8, size: 30000000, end: 16CBC448)
B dbtbxbuf: Buffer TABLP (addr: 112C00C8, size: 10240000, end: 11C840C8)
B dbexpbuf: Buffer EIBUF (addr: 11C900D0, size: 4194304, end: 120900D0)
B dbexpbuf: Buffer ESM (addr: 120A00D0, size: 4194304, end: 124A00D0)
B dbexpbuf: Buffer CUA (addr: 124B00D0, size: 3072000, end: 1279E0D0)
B dbexpbuf: Buffer OTR (addr: 16CC00D0, size: 4194304, end: 170C00D0)
B dbcalbuf: Buffer CALE (addr: 170D0040, size: 500000, end: 1714A160)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Sat Jun 18 13:49:13 2011
S *** init spool environment
S TSPEVJOB updates inside critical section: event_update_nocsec = 0
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1C590D20
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 207B00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 207B0430
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2236 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Sat Jun 18 13:49:14 2011
A **GENER Trace switched on ***
A
A -PXA-
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 19356kb, dir_size: 19300kb.
A PXA allocated (address 3F620040, size 300000K)
A System name
A ORACLE...........................QAS........200706 27030657.....................................
A is used for RFC security.
A Sharedbuffer token: 41534050...33 (len: 111)====== 66092e69785ca0c479c0b06e...
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA-
A
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
A
A Sat Jun 18 13:49:15 2011
A ABAP ShmAdm attached (addr=6C874000 leng
955136 end=6DC70000)
A >> Shm MMADM area (addr=6CCD44B0 leng=126848 end=6CCF3430)
A >> Shm MMDAT area (addr=6CCF4000 leng=16236544 end=6DC70000)
A RFC Destination> destination IDES_QAS_00 host IDES system QAS systnr 0 (IDES_QAS_00)
A RFC Options> H=IDES,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 27042 bytes at 07170040
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\QAS\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\QAS\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N
N Sat Jun 18 13:49:16 2011
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.201.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [20]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume IDES_QAS_00
M ***LOG GEF=> [enxxmini.h 918]
M ***LOG GZZ=> Illegal Format/Version of Shared [enxxmini.h 918]
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000094) [dpnttool.c 438]
M --- C-STACK ---
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000094 (Divide by zero)
App : disp+work.EXE (pid=6012)
When : 6/18/2011 13:49:17.382
Threads : 2
Computer Name : IDES
User Name : qasadm
Number of Processors: 4
Processor Type: x86 Family 6 Model 15 Stepping 7
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 6c8
eax=00000000 ebx=00000396 ecx=212f0040 edx=00000000 esi=7c35043c edi=00000000
eip=00fcb151 esp=05b0fc84 ebp=04ea34f4 iopl=0 nv up ei pl nz na pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00210202
function : Alert
00fcb138 33ed xor ebp,ebp
00fcb13a 38442414 cmp [esp+0x14],al ss:0b61d90f=00
00fcb13e 7458 jz Alert+0x72 (00fcb198)
00fcb140 33ff xor edi,edi
00fcb142 47 inc edi
00fcb143 8bf7 mov esi,edi
00fcb145 eb44 jmp Alert+0x65 (00fcb18b)
00fcb147 8b81c0050000 mov eax,[ecx+0x5c0] ds:212f0600=00000000
00fcb14d 6bc064 imul eax,eax,0x64
00fcb150 99 cdq
FAULT-> 00fcb151 f7b900060000 idiv dword ptr [ecx+0x600] ds:212f0640=00000000
00fcb157 6a02 push 0x2
00fcb159 33ff xor edi,edi
00fcb15b 5e pop esi
00fcb15c 8bd8 mov ebx,eax
00fcb15e 8b81c8050000 mov eax,[ecx+0x5c8] ds:212f0608=00000000
00fcb164 6bc064 imul eax,eax,0x64
00fcb167 99 cdq
00fcb168 f7b9ec050000 idiv dword ptr [ecx+0x5ec] ds:212f062c=00000000
00fcb16e 8be8 mov ebp,eax
00fcb170 8b81cc050000 mov eax,[ecx+0x5cc] ds:212f060c=00000000
00fcb176 6bc064 imul eax,eax,0x64
-> Stack Back Trace <-
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
05b0fc90 00fd785d 00000001 00000002 00000000 04defdc4 disp+work!Alert [enxxmgen.h (520)]
05b0fce0 00fdbe6e 00000000 00fe5bef 00000002 00000000 disp+work!EnqMemInstall2 [enxxmini.h (429)]
05b0fce8 00fe5bef 00000002 00000000 04defdc4 04deb808 disp+work!EnqMemInstall [enxxmini.h (291)]
05b0fd00 00fb3ec5 04deb808 04e39540 05b0fe14 04deb9f6 disp+work!EnqueOpMem [enxxmop.h (82)]
05b0fd24 00fbe807 04de004e 00000001 05e30044 7c35056a disp+work!EnqExecReq [enxxhead.c (2729)]
05b0fdd8 00fbecca 0000004e 00000000 00000000 05b0fe14 disp+work!EnCcEnque4 [enxxhead.c (10587)]
05b0fdf8 00fbf0e4 0000004e 05b0fe14 05237780 ffffffff disp+work!EnCcEnque [enxxhead.c (9755)]
05b0fe4c 00496650 00000003 00000002 05b0ff00 00000000 disp+work!EnqCcInitialize [enxxhead.c (10857)]
05b0fee0 004a3bdf 00000001 00000000 00000000 00430000 disp+work!ThInit [thxxhead.c (1925)]
05b0ff00 00423d5f 00000000 00000000 7ffdf000 05b0ff60 disp+work!ThStart [thxxhead.c (1144)]
05b0ff14 00401085 00000003 002468d8 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1166)]
05b0ff60 01288b60 00000003 002468d8 00247910 01d82000 disp+work!nlsui_main [thxxanf.c (84)]
05b0ffc0 77e6f23b 00000000 00000000 7ffdf000 00000000 disp+work!wmainCRTStartup [crtexe.c (395)]
05b0fff0 00000000 01288a1d 00000000 00000000 00000000 kernel32!ProcessIdToSessionId
State Dump for Thread Id 528
eax=00000001 ebx=00000103 ecx=7c829f59 edx=00560000 esi=00000000 edi=00000000
eip=7c8285ec esp=081dfec0 ebp=081dff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c8285ec c3 ret
7c8285ed 8da42400000000 lea esp,[esp] ss:081dfec0=7c8270fb
7c8285f4 8d642400 lea esp,[esp] ss:0dcedb4b=00000000
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
081dff04 011cd13e 00000694 00000000 00000000 0024f8b8 ntdll!KiFastSystemCallRet
081dff84 7c349565 00000000 00000000 00000000 05cdce88 disp+work!SigIMsgFunc [signt.c (678)]
081dffb8 77e64829 05cdce88 00000000 00000000 05cdce88 MSVCR71!endthreadex
081dffec 00000000 7c3494f6 05cdce88 00000000 00000000 kernel32!GetModuleHandleA
M ---
M
M Sat Jun 18 13:49:17 2011
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 0
M
M pid = 6012
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server IDES_QAS_00 on host IDES (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Sat Jun 18 13:49:17 2011
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 10781
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 6012) [dpnttool.c 333]
M return from clean-up function ...
Regards,

Hi Nadeem
Save your init<SID>.ora.
You can try to set processes and sessions parameters in the init<sid>.ora to the following value :
processes = 800
sessions =1600
- Stop your instance
- Stop your DB
- Recreate the spfile
- Start your DB
- Start your instance
If the issue does not solve the problem, you return back.
Otherwise, when you start your instance is that the processes dw.sap <SID> _DVEBMGSXX starts then dies or they do not start?
Best regards.

Material ledger:'not allocated' variance

Dear all,
For raw material A, it issued to certain production order(say FG is B) in Apr. at the month end, I found that there are some variance(not distributed) in material A due to there is no goods receipt for production order. in May. I performed GR for B, then calculate WIP/variance and perform settlement. after that, I run CKMLCP for ML closing.
However, system can not distribute the variance which occurred in the previous month to B, this means this variance will keep in the variance account forever, and the actual cost of B is wrong.
I do not know whether this is standard SAP, our version is ECC6.0.
Is there anyone know why and how it come and settle it ?
thanks very much

Dear Jin Ming Zhang,
Please, check the note 908776 which explains the possible reasons for 'not distributed' and 'not allocated' price differences.
There is no automatic procedure, but CKMVFM is a valuable tool to analyse the reason for the differences and distribute/include them.
Best regards,
Antje

Actual Distribution FAGLGA31 (ECC6.0)

Hi All,
During creation of distribution cycle using tcode: FAGLGA31 - Create, I faced problem of having valid sender, ie: cost center in the segment creation.
In my sender/receiver tab, I can have
Senders as follows:
Account number
Business Area
Functional Area
Profit Center
Currency
Receiver:
Business Area
Functional Area
Profit Center
Question:
Why I cannot have cost center as sender and receiver?
Does anyone know any ECC6.0 (NEW GL) settings that were missed out?
Thanks.
sbmel

Hi ...
I tried to run the Actual distribution cycle FAGLGA35, and I have the follow error:
general messages for cycle 0LFBCA001 01.01.2010 ***********
Cycle 0LFBCA001, start date 20100101, does not include any senders.
General messages for segment FBCA001 ***********************
No valid sender entries were found.
Does anyone have any idea on this?
Extended error message:
==========
Cycle 0LFBCA001, start date 20100101, does not include any senders.
Message no. GA749
Diagnosis
No senders were found for cycle 0LFBCA001, starting date 20100101.
System Response
It is no longer possible to create receivers and assign senders for the segment.
Procedure
Check the definition of the cycle in the maintenance transaction for Actual Distribution: General Ledger. No valid sender cost centers could be found to match your selection.
If you use the sender rules "Posted amounts" or "Posted quantities", check whether records exist in the database for the criteria you entered (cost element, version...)
During indirect activity allocation with the sender rule "posted quantities", you should also note that only the difference between the planned/posted activity allocation and the scheduled activity quantity is allocated. If you entered activity types as sender, you should at this point also check the activity type category. For those quantities posted with an activity type of category 1 (manual entry, manual allocation) no indirect activity allocation is possible.
1. If this is an allocation in the FI/FI-SL area, the problem could also be due to the inheritance logic for FI-SL totals tables, whose "Inheritance of sender based on the receiver" indicator is activated in the "Partner object update" view (T811U-INHERSRC). These are tables that were installed before Release 4.6A.
Use transaction GCA8 to check this, and see the section on:
Inheritance Logic for Allocations
then correct the affected cycle, if required.
==========

Memory allocation much more than size of table TST03

Hi all,
I found a strange situation, in our system, memory allocation in SP12 shows 2GB is used in DB side, but when I go to transaction DB02 to check the table TST03, it only has 50MB. Our parameter rspo/store_location is already set to 'db'.
System environment is: ECC6 running on AIX 53/Oracle 10g, 64bit.
In my opinion, temse data will be stored in TST03, so I think TST03 size should be larger than memory allocation result in SP12.
Could you please help me about this?
Thanks and regards

Hi Justin
Nice question, really made me think. I just checked, in the newer SAP versions, TST03 has a BLOB column, in the older versions there was a LONG RAW col.
I bet you have the BLOB (ECC6), you can check in sqlplus:
[code]SQL> desc sapsr3.tst03
Name                                      Null?    Type
DCLIENT                                   NOT NULL VARCHAR2(9)
DNAME                                     NOT NULL VARCHAR2(60)
DPART                                     NOT NULL NUMBER(5)
DROWNO                                    NOT NULL NUMBER(10)
DDATALEN                                  NOT NULL NUMBER(5)
DCONTENT                                           BLOB[/code]
A lob column is stored in a seperate segment:
[code]SQL> select SEGMENT_NAME from dba_lobs where table_name = 'TST03';
SEGMENT_NAME
SYS_LOB0000031954C00006$$[/code]
Just replace your segment_name to get the size, you can enter the segment in DB02 too:
[code]SQL> select BYTES/1024/1024 "SIZE_MB" from dba_segments where segment_name = 'SYS_LOB0000031954C00006$$';
   SIZE_MB
        12[/code]
Regards
Michael

Custom field in Total table in NewGL

In NewGL - ECC6.0, what happens if add a new custom field but I don't insert it in Total table (FAGFLEXT)?
Let me know
Thanks

Hi all
But I think there's NO option to have additional fields only in FAGLFLEXA. At least no such option available using the standard tool - i.e. FAGL_GINS.
Please be aware of the data volume in FAGLFLEXT/A by adding new fields.
Br, Kyoko

Allocation in ECC6.0 NewGL

Similar Messages

Maybe you are looking for