Allow certain usb manufacturers

I have tried to following instructions from previous discussions, but cannot succeed.
I am trying to allow all IMATION drives and block other usb thumb drives. I have checked within device manager to check the manufacturer, which is IMATION. Then I went to the console and added Always allow-IMATION within USB Connectivity\Advanced tab. I have tried several settings within the USB Connectivity tab, but cannot figure out how to configure this correctly. Also within my only location "profile" I have usb devices setto Apply global settings.
I have been able to configure it to allow certain serial numbers, but I would rather use either manufacturer or productid. To allow serial numbers I had to add the serial within the Storage Device Control tab, but within that tab I can't add manufacturers.
Thanks in advance,
Andy

Originally Posted by Jan Kalcic
Hi zesm.
what is device class 8?
Would be nice to have that file for me too. I have not been able to
clearly handle USB yet.
Thanks,
Jan
zesm wrote:
> I couldn't upload the file that shows examples of USB connectivity
> because of size constraints. I did email it to you
>
>
If you're still having issues I put the doc up on the ftp site and the administrator guide has also been updated to help assist you.
ftp://ftp.novell.com/outgoing/USBConnectivity.doc
The device class 8 refers to all USB devices that enumerate as file storage.
Hope this helps.
Dave

Similar Messages

  • Group Policy Allowing certain USB stick but Deny ALL other USB devices?

    Is this possible?
    I have "Allow installation of devices that match any of these device IDs" enabled.  How do I disable all other USB devices?
    Thank you!

    How do I get customer support to actually help me instead of telling me to do things that I have already done or that I know are pointless or that have nothing to do with my problem?

  • Allow certain users to capture quotation after bid end date

    Hi
    Is it possible to allow certain users to be able to capture quotation on behalf of suppliers using surrogate bid after the end date has been reached but before the opening date? How would I do this?
    Regards

    Hi
    As the end date and opening date are at the header level common to all bidders/vendors, we cannot manually capture quotation for specific suppliers using surrogate bidding. I dont think there is even a BADI for this.
    Rgds
    Reddy

  • How can i allow certain people to reply to forum post?

    Hi all, how do i allow certain group of people to reply to forum post instead of everyone can reply? Any help would greatly appreciated.

    Hello
    You can secure the forum and subscribe group of people to the secure zone , by this only the subscribers will be able to view the forum and reply on posts.
    You can also enable moderation for topics with which only approved topics will be visible on your site.
    For details please refer to this document :
    http://kb.worldsecuresystems.com/kb/forum-topics-posts.html
    Regards,
    Sanjit

  • Syntax to only allow certain values in column

    What is the syntax, when I create a table, to only allow certain values in a specific column ?
    create table x
    col1 char(1) <- for example, only want to allow Y or N
    ) tablespace myspace;

    That would be a check constraint. Please check the oracle syntax on constraints.
    create table x
    col1 char(1),
    CONSTRAINT check_col1
    CHECK ( col1 in ('Y','N') )
    ) tablespace myspace;

  • Allow certain records a user can view

    Hello,
    Which method is best to implemet a solution to allow certain records from a table to be selected from a particular user? I can build a view and grant select on that view to the user but I like to know if there is a better solution? (lable security?) Thank you.

    You can look into Virtual Private Database (VPD), achieved by Fine-grained access control
    http://download.oracle.com/docs/cd/B19306_01/network.102/b14266/apdvpoli.htm#sthref2179

  • WHERE DID YOU HIDE THE AD BLOCKER PAGE TO "ALLOW" CERTAIN POP-UPS?

    I've got a few questions! And I WILL NOT keep logging in to ask every one! First, Why, after I have logged in to get to the support page, do I have to log in AGAIN, just to get to the page to see a reply to a question? AND THEN, when I want to ASK a question? There should not be a need for "SECURITY MEASURES" just to ask a stinking question for gods sakes! Second, When I downloaded fire fox I installed the Ad Blocker Add On, but now that I want to tell it to "ALLOW" certain sites to be "overlooked", I cannot find the icon that used to be up in the right hand corner next to "Home" and Bookmarks"! I was told these were going to be Easier to use. I have looked everywhere I can think of that should be looked at to find something from Fire Fox and its not anywhere., Please help everyone, and me, out with these problems!

    Well I have to say thanks because I found the Ad Blocker icon. But when I was trying to move it I could not drag it anywhere when I tried to, so I clicked on "put in status menu/bar" and low and behold now I cannot find it or the status menu/bar anywhere! When I look to the menu bar,(which by the way I did not find except by accident, way down near the bottom of the screen) there is a n"faded out" tiny x that goes away with the entire menu bar whenever I click on it! So now if someone would be kind enough to aim me in the direction of the status menu/bar, I'll put it back where it was and hope I won't lose anything else! thanks for the quick help and Goodnight all!

  • G580 Problems re-booting if certain USB devices still attached

    I have had several instances when my laptop has failed to boot up - it does that horrible long-winded attempting to restart palaver with scary messages. So far I have always got it up somehow, eventually. This seems to happen if I leave certain USB devices plugged in - they work perfectly fine on my other, cheaper, down-level, laptops, but cause my G580 to completely lose the plot.  It is probably my USB 2,0 hub, but might also be my USB 2.0 cheap keyboard. I know the solution is to remove these devices and shutdown before it gets the chance to lose the plot - but is there a fix so that this isn't necessary?

    i have had plenty of experience with this exact problem, except mine was worse as even if i plugged ina  usb mouse it wouldnt work, and weird things like caps lock locking my mouse movement happenbed anyways.
    The fix was to buy a PCI -> USB card, a PCI card with 4 usb ports basically, it was under ten english pounds and fixed all my usb problems.
    This is the one i got btw
    http://www.ebuyer.com/customer/products/index.html?rb=1591095797&action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&product_uid=32620
    i didnt look far but i guess thatw as a fair price.

  • Disable forced bitlocker encryption for certain USB devices

    Is it possible to specify certain USB removable devices to not be Bitlocker encrypted?  Example - A GPS so the user can do updates.  I didn't see any way to do this via policy.

    No, the reason is this, bitlocker is not going to make any difference between the devices based upon the hardware ID; it only takes the class of the device while applying the policies. 
    Mayank Sharma Support Engineer at Microsoft working in Enterprise Platform Support.

  • How do I only allow certain users to print in color?

    Product Name: HP Color LaserJet Professional CP5225dn Printer (CE712A)
    Operating System Installed: Windows 7 Enterprise (64bit)
    I work at a K-12 school and purchased the HP Color LaserJet Professional CP5225dn Printer (CE712A) for use in our computer lab. I would like to know if it is possible to have it so that only certain users can print in color (possibly put a password on it). I know the cost for color is higher, and therefore, would like it so that students have to approve through teacher if they want to print in color.
    We are running it on our Print Server (networked) not through USB.
    Thank you for the help.

    Hi,
    That's a very good question actually. In my corporate networks, we are talking about hundreds of laser printers and the ONLY thing we can do: only allow people access to a set of mono laser printers, not all printers. For example, the following printer is using B&W as default but can't stop users to print in colors if they could access to the resourse:
    Regards. 
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How can I restrict Lion to only allow certain network users to login when bound to an Active Directory?

    Hi,
    I'm trying to find a way to configure which network users can login to a lab of iMacs running 10.7.4. They're being deployed using DeployStudio, and the Macs are bound to an MS Active Directory by a script that runs as part of the workflow. I'd like to have another script run after the AD binding to permit only users in certain AD groups to be able login to them.
    I'm halfway there, in that using dseditgroup I can easily add AD groups or individual users to the relevant group (deseditgroup -o edit -a <domain\\group name> -t group com.apple.loginwindow.netaccounts. After running this I can see the desired groups added to the list in Sys Prefs -> Users & Groups -> Login Options -> Options. However, membership of this group is deemed irrelevant by the fact the radio button above this list for 'Allow these users to log in at login window' is still set to 'All network users' and not 'Only these network users'.
    Does anyone know of a way to enable the 'Only these network users' option via the Terminal/a shell script?
    Thanks,
    Chris

    I tried that, thinking it was exactly what I wanted, but it still sends stuff as SMS (green bubble).

  • (new to scripting) Only allow certain paragraph styles to break to next column/page

    Hi all,
    As stated, I'm very new to scripting. I've done a few small scripts to automate Photoshop tasks and such. I'm in the process of trying to learn Javascript as much as possible, with the hope of bringing about more efficiency for our small production department. It's a daunting task, but I'm trying my darnedest.
    One of the number one goals I have is the find a way to automate pagination of weekly transaction records. These records run between 32 to 48 pages normally, with each page having 5 columns. Creation of these pages is very systematic, so it would seem that this process should be able to be automated, but there are some challenges I'm having a hard time thinking about how to attack.
    One of the key tasks needing to be figured out is getting the records to go in with headings and subheadings always starting at the top of a page/column. Just about all the copy comes in with predetermined paragraph styles, so a script should easily be able to search for instances of each style. What needs to eb accomplished is only allowing the flow of copy to break on certain styles and not others ... (counties, towns, etc.)
    For example: if you have the following  ...
    Countyland <styled "county">
    Utopiatown <styled "town">
    46 Appletree Lane ...... $500,000  <styled "listing">
    Sold by: Some Guy   <styled "listing">
    Bought by: Other Guy  <styled "listing">
    Mortgage: This Bank  <styled "listing">
    Date: 12/14/11  <styled "listing">
    Dystopia Village <styled "town">
    47 Orangeplant Road ...... $400,000  <styled "listing">
    Sold by: Some Guy   <styled "listing">
    Bought by: Other Guy  <styled "listing">
    Mortgage: This Bank  <styled "listing">
    Date: 12/14/11  <styled "listing">
    If the two records above were to fall near the end of a column, the break to the next column should NOT occur anywhere except:
    - Before the county (causing the county to start at the top of the next column
    - Before the second town (Dystopia Village, forcing that town to the top of the next column)
    - After both (forcing whatever town/county is next to goto the top of the next column)
    So basically, I need to find a way PREVENT column breaks where they should not occur. Inserting column breaks is one thing (I know how to do that). Prevention is the issue though that confounds me.
    Does anyone have any thoughts of how to achieve such a thing? I know there are "non-breaking space" characters ... is there, or could there be, some kind of a "non-breaking return" character? Or would it be more feasible to test for the paragraph style at the bottoms of columns and insert column breaks in once it finds an appropriate match?
    Am I going about this all wrong?
    Again, any help or suggestions are more than welcome.
    Thanks much.
    ~Nate
    FYI .. using InDesign cs5.5

    I am now wondering about a possible solution. It would be one hell of a challenge for me to figure out how to code it, but I at least need to figure out the theory first, then I'll try to figure out how to code it.
    Again, the issue at hand is preventing column breaks for the "listing" style in the following example. Please note, the number of "listing" lines varies. If the following two entries (in a long list of similar entries) were to be near the end of a column, I'm trying to cause the flow of text to break only before a county style, or a town style (if it's not the first town in the county).  Basically, no breaks in the middle of listings.
    Countyland <styled "county">
    Utopiatown <styled "town">
    46 Appletree Lane ...... $500,000  <styled "listing">
    Sold by: Some Guy   <styled "listing">
    Bought by: Other Guy  <styled "listing">
    Mortgage: This Bank  <styled "listing">
    Date: 12/14/11  <styled "listing">
    Dystopia Village <styled "town">
    47 Orangeplant Road ...... $400,000  <styled "listing">
    Sold by: Some Guy   <styled "listing">
    Bought by: Other Guy  <styled "listing">
    Mortgage: This Bank  <styled "listing">
    Date: 12/14/11  <styled "listing">
    Naomi previously suggested messing with the "keep options" in the styles. This will solve the issue of preventing breaks before listing details start. But it won't help in keeping listing details from breaking, since the number of lines can vary.
    I'm now thinking ... might it be possible to have a script search all copy, looking for the last line of listings, and then apply a second listing style with a different keep option setting? The "normal listing" style would "keep next 1 line". The "last listing" style would not, therefore, allowing a break.
    Here's a map of what I'm thinking: (bear with me on the terrible syntax, this is just for illustrative purposes)
    listingNormal has keep with next 1 line applied
    listingBreak does not keep with next line
    if currentLineStyle == listingNormal
    AND
    style of next line != listingNormal {
    currentLineStyle = listingBreak
    Does this make sense? If so, does this sound feasible?
    Thanks any and all.
    ~Nate

  • Authorization object not to allow certain user to enter sloc PO

    Dear All,
    i have manage to go su21 to create under mm purchasing authorization object called Y_BEST_LOC with Acty and LGORT field. other than that i have insert check item under program RM06ENHI. after that i go to su24 to assign the transaction code check for me21 and me22. under field value for me21, my new object i want to assign value (interval) = $LGORT, but don;t know how so i leave it blank.
    Come to user profile i adding this object into the authorization to check, and put in only allow for 0001 and 0002 location. But the user still can save the PO when choose 0004 without error. I want to know missing step that should be done to prevent certain user to order under 0004 storage location.
    Kindly suggest and guide me. thanks in advance
    Regards
    Aishah

    ME21/ME21N doesn't even check if the material is extended to the storage location entered in the PO. I don't think what you did is enough to restrict users per storage location, you need to find a user exit or BAdi and do the authorization check in the your custom code
    AUTHORITY-CHECK OBJECT 'Y_BEST_LOC'
             ID 'ACTVT' FIELD '01'  "Create
             ID 'LGORT' FIELD '0002'. "Storage Location 0002
    IF SY-SUBRC = 0.
    " User has authorization
    ELSE.
    message 'Not authorized for storage location' type E
    ENDIF.
    You may have to use the following Business Add-in (TCode SE18)
    ME_CHECK_ALL_ITEMS                    :  Run Through Items Again in the Event of Changes in EKKO

  • Contact form not allowing certain characters

    Hi
    I added a contact form to a site, and the input fields aren't allowing numbers or certain letters.
    If I test the contact form swf by itself, it works fine.  But as soon as I test it in the site, the problem occurs.
    I haven't got any other actionscript around the contact form, so am puzzled.
    I would sure appreciate someone taking a look to see if anything obviou is wrong.
    The site is www.skinrevival.com.au  - the contact link is on the bottom left menu.
    Cheers guys
    Shaun

    U should enable the Numerals and puctuation to accept the special and number chanacters. find the attached image for your reference.
    Thanks
    Thil

  • Firefox is not allowing certain websites to load can sign in remotely to make sure it is installed correctly and completely?

    Can you sign into my computer remotely to make sure that I've installed firefox correctly and completely. I seem to be missing plugins, adobe, java, fire fox won't allow me to download them. On certain websites I'm getting error messages.

    '''ADOBE FLASH'''
    -> Adobe Flash Player 10.3.183.5 (2.95 MB)
    * http://get.adobe.com/flashplayer/
    * Remove Checkmark from also Downloading other Optional Softwares (e.g. McAfee, Google Chrome, etc.)
    -> click '''Download Now''' button
    -> How do I install the Flash plugin?
    * https://support.mozilla.com/en-US/kb/installing-flash
    '''JAVA'''
    -> Download & Install Java SE on your system:
    * http://www.java.com/en/
    * click '''Free Java Download''' button
    -> Using the Java plugin with Firefox
    * https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox
    Clear Cookies & Cache
    * https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
    Clear the Network Cache
    * https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Check and tell if its working.

Maybe you are looking for