Allow connection to RDS applicatoins and restrict RDP connection for domain users

I have configured RDS setup, with the following Roles: RD Web Access, RD Gate Way, RD Connection Broker, RD Session Host and RD Licensing.
the problem is that the domain users can't run the published applications unless I add the "Domain Users" group into the remote desktop users on the RDS servers, but now all domain users can connect RDP to the RDS servers.
so we need domain users to connect to the RDS published applications and restricting them from connecting RDP to the RDS servers, in addition I can see that internal servers are accessible from outside through the RD gateway server.
any ideas ?

Hi,
Thank you for posting in Windows Server Forum.
For a test you can create one group, assign the specified user under that group. Add that group under “Remote Desktop User” local group. For getting access to published Remote Application you can simply assign\add the group under collection properties of the
application and that user can get access.
For restricting user to server remotely, you can add that group of user under “Deny logon through remote desktop service” under User Rights assignment. Also you can check “Deny
New User Logons to an RD Session Host Server” settings.
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

How to Restrict printing the document using IRM for a Single Document?Allow printing for some documents and restrict the printing for particular documents in same document library?

Can we able to Configure the IRM in Document Level in SharePoint Document libraries?
The document library contains multiple document sets , Can we restrict the printing according to document sets? Allow printing for some documents and restrict the printing for particular documents in same document library
Is this possible?Please suggest.

Yes, that can be done. But note that all administrators will have the same right to print, so you need to make sure the users are not administrators. You can include a macro to disable printing, but if the users disable macro, they can print the documents.
Hence, there is no foolproof way to prevent printing documents. If you still need a foolproof security, PDF format provides password based security (viewing doesn't require a password) that can be implemented to prevent the document from printing,
which doesn't require any special scripts and is tough.
You can have a look at the following links:
http://msdn.microsoft.com/en-us/library/office/ms458245(v=office.14).aspx
http://msgroups.net/microsoft.public.word.docmanagement/prevent-printing-of-docum/91353
http://www.go4sharepoint.com/Forum/prevent-printing-saving-documents-10150.aspx
The following link explains about the security features in PDF. This is for information purpose only and not for promotion of any products:
http://www.pdflib.com/knowledge-base/pdf-security/
Balaji Kundalam

I am trying to connect my Canon MG5220 and its not connecting to my macbook running lion?

i am trying to connect my Canon MG5220 and its not connect to my macbook running lion? i updated the drivers to 10.7 lion and i reconnected the printer to my wifi which both devices are connected to. when reinstalling the drivers, it will not connect. using Canon IJ Network Tool cant find the printer it always comes up with
The printer could not be detected. Please confirm the following:
- The network settings are correct.
- The printer is turned on.
- The printer is not used from another computer.
i have turned the printer on and off, its not connected from another computer, and im almost 100% sure the network settings are correct

Syncing with iTunes
How to transfer or sync content to your computer
If your contacts are in a supported appllication or cloud service, the above will allow for syncing them to the iPhone.

HT6010 I have tried to update my iOS 7.3.0 and I keep getting a msg saying bit connected to the Internet and I am connected by WiFi plus my phone has Internet connected also, I have repeatedly clicked on retry, still get message bit connected to Internet

I have tried to update my iOS 7.3.0 and I keep getting a msg saying bit connected to the Internet and I am connected by WiFi plus my phone has Internet connected also, I have repeatedly clicked on retry, still get message bit connected to Internet

Try this support document http://support.apple.com/kb/TS3694 and look at this section.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

Entered apasscode and forgot what it is. and now it says iphone disabled connect to itunes.. and when i connect it to itunes it tells me please enter the passcode for your iphone and connect it to itunes.. I dont know what to do now..

Entered apasscode and forgot what it is. and now it says iphone disabled connect to itunes.. and when i connect it to itunes it tells me please enter the passcode for your iphone and connect it to itunes.. I dont know what to do now..

iOS: Forgot passcode or device disabled - Apple Support

List of Calculated KFs and Restricted KFs created by end users

Hi all,
Is there one way that I can run a list of all Calcuated KFs and Restricted KFs created by end users in Production. We would like to DELETE all CKFs and RKFs created by end users that are not following the naming convention. So we are looking for a tool to list all CKFs and RKFs created by end users. Can you help?
Thank you
J.

Hi
Table RSZELTDIR will give you the CKF and RKF but will not tell who has created. The user entry you will find in table RSZCOMPDIR.
So first go to second table display result by restricting to user name for which you want to delete the CKF and RKF. Select all the component ID and Put in first table and restrict the selection to CKF and RKF .
thanks
Tripple k

The iPad you connected is not recognized and cannot be activated for servic

Hi there,
Today I've received a replacement iPad (from Apple), and surprise surprise, when I connected it to iTunes for proceed with the initial setup, the following message arised
We're sorry, the iPad you connected is not recognized and cannot be activated for service.
We recommend you visit your nearest Apple Store for more information.
I've contacted with my local apple support, and they told me to try to reinstall the iPad entering in DFU mode. I did it twice, and both times the procedure went perfectly but once finished the above message appeared once again.
They have told me to send it once again for repair, but, someone knows how to resolve this ? I've sent my previous iPad ten days ago, and now, I will have to wait other ten and I'm a little bit dissapointed.
Well, thanks in advance and merry christmas for all of you.
julio

They should pay to overnight pickup and overnight delivery back to you since it's their screwup. Ask them!

"There is a problem with your device,We're sorry the device you connected may be damaged and cannot be activated for service. "

My problem is after i did a restore on my 32gb ipod touch i now get a error on itunes that says "There is a problem with your device,We're sorry the device you connected may be damaged and cannot be activated for service. " Please help

In the ipad discussion forums there apparently is a HUGE problem with people not being able to update to ios 4.3.3, it apparently locks up their devices and they are also getting the error "there is a problem with your device".... some are reporting the same problem with their ipod touch as well... it looks like it's a global issue
The forum is in the ipad section under the title of "There is a problem with your device".
I have dodged a bullet on this one since i have not updated my ipod's or ipad in the last couple of days.... i will hold off syncing to itunes until this issue is fixed... good luck, and spread the word if you can to get apple to listen

We're sorry, the device you connected may be damaged and cannot be activated for service. We recommend you visit your nearest Apple Store for more information. To find your nearest Apple Store, click here.

I needed to restore my phone to an earlier restore point because my notes were deleted after I restored I recieved this message
"We’re sorry, the device you connected may be damaged and cannot be activated for service. We recommend you visit your nearest Apple Store for more information. To find your nearest Apple Store, click here."
I need to get phone running asap abd do not want to go to Apple to talk with Genius.

That message will occur when you put in a NON-AT&T sim
just get the sim out and try again

How to fetch APPROVER NAME and approval date dynamically for an user

Hi all..
How to fetch approver name and approval date dynamicall for an user in an email template..
can any help me to sort out this pbm,i am new to IDM..
Thanks in advance..

Access policies get a static value. You can't populate a field with an adapter. If you must do this, leave the field blank, and put an adapter on the process form for your field that must be populated using code or logic.
-Kevin

DUN Bluetooth connection to PocketPC, Vista and restricted user rights

Hallo,
I've successfully established a DUN connection to my Pocket WM5-based QTEK 9100 smartphone via Bluetooth and the Toshiba Stack, latest version. My notebook is a X200-21D with Vista Home Premium.
Everything works well as far as I don't change the Vista user to an user with restricted rights, for the user with Administrator rights the Bluetooth Utility created a new DUN connection and a new modem with a virtual COM port. The user with the restricted rights isn't allowed to setup a new connection but this is necessary to connect to the smartphone with the Bluetooth Utility. On the administrative account the radio button to allow the connection to be dialed from other users is disabled and greyed out, so there is now way to open it for other users.
How can I setup an Bluetooth DUN connection for a user with restricted rights ?
Thank you in advance !

Should the Restricted user use the same DUN configuration like the Admin ?
If so, then you can use "Bluetooth Settings-> Custom Mode". This allows you to
select the "33600 Standard Modem" from the list which was configured before by
the Admin. So every DUN which was configured by the Admin can be used by the
Restricted user with this method. Restricted users can not install hardware, so
if the Admin has not installed a modem, then also the Restricted user can not use it.
The Admin can pre-install a modem with the Bluetooth stack installation.
This is useful if the restricted user should be able to configure a DUN connections
with advanced modem settings which are not used by the Admin.
This should be possible if the "as.ini" file has a line "MODEMINST = 1"

GPO to kill disconnected and idle RDP connections

Hello
I'm looking for a way to Kill RDP connection with idle & disconnected state. the server's owners usually connect to the servers from their PCs to the servers using the Remote Desktop Connection and they forget to disconnect properly. some left disconnected
connections cause an issue later for those user where their AD accounts get locked out due to reset their password.
now I want to apply a group policy on all servers in the domain to do:
kill disconnected connection after 1 hour.
kill idle connection after 4 hours.
our domain is windows 2008 R2 (native) and the we have a mix of OS running on the member servers. we have a few windows server 2003 R2 and the majority is windows server 2008 and windows server 2008 R2.
any idea is highly appreciated....
Systems Specialist

Hi
Actually in Windows Server 2003, Windows Server 2008 and Windows Server 2008 R2, both
set time limit for disconnect session and set time limit for active but idle RDP session group policy are in different location.
In Windows Server 2003 -> Computer Configuraiton\Administrative Templates\Windows Components\Terminal Services\Sessions
In Windows Server 2008 -> Computer Configuration\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Session Time Limits
In Windows Server 2008 R2 -> Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remtoe Desktop Session Host\Session Time limits.
Generally, there are three ways to achieve that "kill disconnected connection after 1 hour, kill idle connection after 4 hours
a. Edit it via GUI.
b. Edit it via Group policy.
c. Edit it via registry.
Using the Group policy is the recommended way, if both set time limit for disconnect session
and set time limit for active but idle RDP session group policy have been applied successfully on the TS servers/RDS servers, then the registry
MaxDisconnectionTime=128238540 and MaxIdleTime=1282031640 under HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services will be added.
So currently please check whether above registried have been written on these servers that you said didn't work.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages for some users and allow the access for some users?

I have a requirement to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages for some of the users and allow the access for some of the users.
I have applied the below code on the web.config file but this modification impacting only on the web application level not on the site collection and sub site level.
<location path="_layouts/15/InPlaceRecordsSettings.aspx">
    <system.web>
      <authorization>
        <deny users="*" />
      </authorization>
    </system.web>
</location>
<location path="_layouts/15/InPlaceRecordsListSettings.aspx">
    <system.web>
      <authorization>
        <deny users="*" />
      </authorization>
    </system.web>
</location>
When I tried the access on
:<portno>/sites/<scname>/_layouts/15/InPlaceRecordsSettings.aspx">http://<servername>:<portno>/sites/<scname>/_layouts/15/InPlaceRecordsSettings.aspx page allowed the access for all users.
Please suggest the possible solution to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages on SharePoint2013.
Thanks
Ramasubbu

You can't do it from OOTB.
_layout folder is accessible to the users if they have read access in any of the site even subsite.
You can modify *.aspx file, add your custom control which will check user.
[custom.development]

I Get error message -3221 when I try to connect to iTunes store and can not connect

I had just updated iTunes when I started getting -3221 message and unable to connect. I show my firewall allows iTunes but Can not figure out why it is not working.

have a look at:
Possible iTunes Store errors
iTunes: Advanced iTunes Store troubleshooting

I download the recent ios for iphone 4 and connected to my pc and it wont connect to itunes. What is the lastest version of itunes that DOES NOT support ios 7?

i download the recent ios for iphone 4. i connected iphone 4 to my pc and it wont connect to itunes. What is the lastest version of itunes that DOES NOT support the lastest version of ios?

Yes, due to Incomplete Software Update on your iPhone your Device is now in Recovery Mode and you cannot take a Backup now. But if you have taken a backup earlier then you can Restore that backup on your iPhone after you Reset your iPhone to Factory Settings.

Allow connection to RDS applicatoins and restrict RDP connection for domain users

Similar Messages

Maybe you are looking for