Allow direct connections to your contacts only not working properly

So basically whenever I mark the box next to allow direct connections to your contacts only and hit save it stays like that until I relog, however when I relog the box isn't marked for some reason. I don't want to get booted anytime soon so any help would be appreciated. I don't have Skype on my phone or anything else, just my computer.

Same issue here. The strange thing is that it affects exactly the same contacts on all my devices (iPhones, iPads, MacBooks and iMac): I have 189 friends on Facebook and only 23 are syncing. So it is likely that the issues is caused on the Facebook side.
I also tried to update the Facebook contact information. The amount of updates is weird: it goes from 100, 102, 2 to 1 contact(s) updated, while only 23 contacts are syncing?
Kind regards,

Similar Messages

Contact List not working properly

Today, my iPad 2 contact list stopped working properly. It opens but does not remain open. It stays open for one or two seconds and then closes. No opportunity to add/delete contacts. Anyone seen this before? I've never had a problem. Any hints or tips are appreciated. Thanks.

You did restore your iPad from that backup that was taken just prior to upgrading to iOS 5, right?
All apps and settings are included inthe backup.

"My Contacts Only" not working With SMS

Hi, there.
I would like to know if the "My Contacts Only" block in [Settings > Notification Center > Message] works only with iMessages or if it includes SMS also.
I'm from Brazil and here we get a lot of spam messages via SMS.
Even though I got this setting turned on, I still get a sound alert every time a SMS spam message hits my inbox.
And blocking the caller is no good, since the messages always come from different numbers.
I have an iPhone 4 under iOS 7.0.6.
Thanks in advance.

iPhone: Troubleshooting a cellular data connection

Visible (Screen Only) not working properly

This seems like it should be such and easy thing to figure out, yet I cannot understand why, when I print the form, it still prints. Can someone troubleshoot this one for me please? Here's my form:
https://acrobat.com/#d=Bktug5D4t0vBOcim5z2AQA
The field that is set to Visible (Screen Only) is the dropdown field "Reason". But it still prints.
Thanks!
Jo

I was having this same issue, and after reading this post, tried the following...
1) Changing the version of my document to v8.
Result: this didn't work. Objects marked "visible: screen only" still print.
2) Creating a NEW form in v8. Copying and pasting the objects from my previous form in this form.
Result: this works. Objects marked "visible: screen only" still print.
So based on this little experiment, and the previous posts here, I think it is safe to say that the document must be created as v8 right from the start. Simply changing the version of a pre-v8 form will not work.

ESPN only not working properly (not from "blackout" issue).

Both of my ESPN channels become fuzzy or just go to unavailable entirely. It's not a "blackout" issue. For example I am watching sportscenter right now and the channel goes in and out, freezes up, etc. ESPN works fine on my bedroom tv. I have also received a new box to switch out to see if it was a box problem, but the other box does the exact same thing.
Again, it's only the one channel. Any ideas?

Retighten all coax connectors to the STB, including any splitters in the signal path. What you describe appears to be a frequency-related problem (I think the two ESPN channels are on the same QAM channel) that loose coax connectors can cause. It's a physics thing that can effect only certain frequencies. This is a solution other have been successfully used to fix problems were only a few channels break up or go away.

Feature request: Allow direct connections for contacts only

Hello, on Windows there is an option "Allow direct connections to contacts only" as described on http://en.kioskea.net/faq/32357-skype-hide-your-ip-from-people-who-are-not-on-your-contact-list. Many people including myself would like to see this feature implemented in the Linux client. There are solutions to protect the IP from resolvers like setting up proxies. However, the performance of free SOCKS-proxies is mostly very bad. VPNs with an appropriate bandwidth also cost an amount of money and additionally, it is difficult to only route Skype traffic through a VPN. Setting up a VM with Windows or WINE just to run Skype is an overkill as well. I consider it inconvenient that this feature is implemented on Windows while - in my opinion - mainly Linux users being aware of security might be in need for this feature. Therefore, I request to implement such a functionality into the Linux client. Kind regards from Germany

If you want to enable that feature on a Skype client that does not offer it in the GUI you would have to do it manually. You can follow the guidance here and the same information applies to the Linux client and any other client you have root or file-level access to. http://community.skype.com/t5/Modern-Windows-from-Windows/Windows-8-IP-Hiding/m-p/2876437/highlight/true#M19476 Linux path:/home/Username/.Skype/YourSkypeName/config.xml

HT201210 you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues th

you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues that could prevent you from restoring. After restarting the computer and iOS device, attempt to restore again.

How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library.   Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC.   If iTunes still crashes, then if could be a number of other things, but probably not your library.   My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes.   If that doesn't work, then my next ideas you won't like.

You are not allowed to continue because your account does not have the proper privileges

I've been using PS since version 3. I currently run CS2 on Windows XP service pack 2. I've been using CS2 since it was first released. Now, all of a sudden, anytime I install or uninstall a program, whether it is related to Photoshop or not, when I start CS2 I get a window that says "You are not allowed to continue because your account does not have the proper privileges" and the program aborts. The first time this happened and after I had restarted CS2 for the 4th time it started normally. Since then it requires at least one restart (not reboot)after the error and then CS2 starts normally. Anyone have any idea of what is going on here? The first time it happened was right after I had installed a new HP AIO printer and I thought that may have had something to do with it. However, I have installed a couple of other programs and uninstalled another, none of them related in any way to CS2, and I get the error the next time I run CS2. I have found some posts about this but no answers, and most of the posts were related to Vista, not XP. I need help please.

there's a section in adobe.com (not adobeforums.com!) where after you log in (seperate log in from this site) you can go to "my account" and then "my registrations". you can manually add registrations there. that's how i've registered most of my adobe purchases.
ok. just ran through it:
go to http://www.adobe.com/ (make sure you have flash turned on)
click "Your Account" in the upper left corner.
log in with your adobe.com id, create one if you don't have one. this is SEPERATE from the id you log into this forum with!
click on "View Product Registrations"
click on "View Adobe branded products registrations"
if you have any registed packages, they'll be listed. at the bottom of the page click on the button that looks like this:

Headphones not working properly, i need to contact apple

Hi! My headphones are not working properly and I need to request new ones from Apple but I do not know how to contact them through e-mail, I couldnt find such an option in the support pages, I also need to ask them an issue about my warranty. I can not use the chat help option because somehow I can only select ipod shuffle and i do not even have it, why are chat pages only for ipod shuffle? Anyway, I'll be glad if somebody tells me what to do to contact them by mail. Thanks!

There is no email tech support, for new headphones you fill out a service request.
You can arrange online service here.
Service request.
To check the status of your warranty, go here.
http://www.apple.com/support/

I had somebody work on my OS 10.9.2 to speed it up. He failed and now Preview, Textedit, App Store, Mail and Contacts do not work anymore. I can still use Safari, Firefox and iPhoto etc. How do I get it fix I can still use Safari, Firefox and ed again?

I had somebody work on my OS 10.9.2 to speed it up. He failed and now Preview, Textedit, App Store, Mail (crashes) and Contacts do not work anymore. I can still use Safari, Firefox, Word, Photoshop and iPhoto etc. How do I get the Apple programs fixed again?

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

The wi-fi on my ipod touch is connected but the internett is not working! Help

Soo annoying, it's connected but the internett is not working. I don't know what to type in or what to do, so I need help.

Are you 100% positive you are connected? Head to Settings - Wi-Fi and tap the > next to the network you are connected to? What is listed for an IP address? If it's in the 169.x.x.x range, it means your iPod did not properly receive a valid IP address via DHCP from your modem/router. So the 169.x.x.x address is a self-assigned one.
This can usually be resolved by a reboot of your router. You can do this by unplugging it for about 30 seconds. After it powers back up, try reconnecting it. It wouldn't hurt to try a reset of your iPod as well. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
See here for more troubleshooting suggestions.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

I get wireless connection but my internet does not work on my ipad 2

I get wireless connection but my internet does not work on my ipad 2

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

A device attached to your system is not working!!

I am trying to connect to Oracle8i Personal Edition through a JDK1.2.1 application using the classes111.zip or classes12.zip package. After running the application I get this error message: UnsatisfiedLinkError: ocijdbc8: A device attached to your system is not working. I you have any idea what is happening, please answer inmediately.

You are using the oci8 driver so your program is looking for the native mode Oracle Client software. Install the Oracle Client software or use the thin driver.

Hi, My face time is not working properly in my computer and mi iPhone, some of the people that i used to contact a can't talk to anymore, and some i can. Its not working in my mac nor in my iPhone, it just shows legend that says face time error

Hi, My face time is not working properly in my computer and mi iPhone, some of the people that i used to contact a can't talk to anymore, and some i can. Its not working in my mac nor in my iPhone, it just shows legend that says face time error, what can i do???

Assign an email address (gmail.com?)
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Satellite Pro U200: VGA output not working properly when AC adapter was connected

Hi,
I have a problem with vga output. When I'm working on battery and connect my notebook to external monitor it's ok, but when I connect AC adaptor then start waving also bluetooth and wlan does not work properly. In other case when I remove battery from notebook and connect AC adaptor it works properly.
thanks in advance

As long as you use a CRT you should set the refresh rate new, at least 85Hz. Standard is 60Hz as far as I know, and that hurts in your eyes.
The wireless lan behaviour is quite normal as long as your not right next to the access point. On battery power the wireless lan card reduces its energy consumption thus the connection will be poor if you dont have a perfect signal. You can turn this off in the iNTEL Pro/SET wireless software, where you can configure the adaptor. Try to change the powersafe mode to manual and full power, this should solve your problem.

Allow direct connections to your contacts only not working properly

Similar Messages

Maybe you are looking for