Allow infinite attempts isn't working

I'm using Captivate 8. The image buttons that I created (I have all of the up/down/over versions saved in the right folder) are all set to allow infinite attempts. When I preview or publish the course, though, each button will only work once! For example, on the first slide, I can pause and play one time each; if I continue to click either button nothing happens. Any suggestions?

You misunderstand 'Infinite Attempts'. I'm missing just what I wanted to see in your screenshot: what are the actions? If you trigger a simple action, it will be executed but at the same time the playhead will be released. That has always been the design. To avoid releasing the playhead, you need to replace the simple by a standard advanced action (can have one statement).
Why choose Standard over Simple action? - Captivate blog
I wanted to give you this information, because I suspect you do not understand the behavior of interactive objects.Moreover your buttons do not have a pausing point. If nobody clicks any button, the playhead will automatically continue, and when reaching the end of the slide, go to the next slide. I don't see any utility in having a Next button without a pausing point. Apparently you deleted it, because buttons normally have a pausing point at 1.5secs. Check the Timing panel.

Similar Messages

  • Button set to infinite attempts only works one time

    I have a project that includes branching into five topic areas. There is a "menu" type page with five buttons on it. Each button is set to allow infinite attempts. Each button is set to "jump to" different slides within the project. When the user finishes reviewing that branch, they return to this menu page and can either select another button to jump to another slide, or they should be able to go back in and review the same area again. However, the button they just clicked will no longer work.
    In my troubleshooting, I have tried using Click Box and Transparent button types. I have tried both with and without the "Include in quiz" setting. I have tried changing "infinite" attempts to "100" attempts. Nothing seems to allow the user to execute the action on that button a second time. Any ideas?

    Hi,
    I tried to simulate this with a small project which seems to be working fine for me.I am attaching the project using acrobat.com.
    https://acrobat.com/#d=i1LzcvsM6gSszRWRCv5XDg
    Let me know if this is what you are trying to do.
    Sikandar

  • Move forward even on incorrect answer with infinite attempts?

    Hello,
    I want to use captivate for a summative assessment where students can have inifinite attempts at each question and are able to move backwards and forwards through the quiz. From what I can see at the moment when I set the question level attempts to infinite the slide never progresses until they get the answer correct. I want them to be able to change their answer but move forward on submit even if their answer is incorrect? At the moment I can't seem to see a way of doing this? Is my only option to use custom slides?
    Thanks.

    You are correct that if you set infinite attempts on a question then Captivate will assume you wanted the student to remain on that question until they got it correct. 
    Developers often find it difficult to understand how Captivate's quiz questions work. There are many ways you can configure the question options.  In fact there are good reasons for seemingly bizarre behaviours, but those reasons are often masked by the way your settings are configured.
    As a sample: Once the participant submits an answer for a quiz slide (correct or incorrect) and then progresses to another slide, their answer for that slide is locked in.  If you have multiple attempts on that question allowed, AND you have backward movement allowed, THEN your participant can move back to the previous question and reattempt it, but if you don't have the Retry caption or Failure levels turned on, Captivate will then only appear to allow them to submit a correct answer. 
    If you want the user to be able to move forward even if their answer is incorrect, just enable the SKIP button on the question slide.  The user can then opt to click this button to move to the next question.

  • I changed the password to my ipod but it isn't working and I don't want to restore it. Is there a way of getting rid of the pass word or un-disabling my device?????

    I changed the password to my ipod but it isn't working and I don't want to restore it. Is there a way of getting rid of the pass word or un-disabling my device?????

    Connect the iOS device to your computer and try to make a backup.
    iOS: How to back up
    Then restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • My MacBook Air keyboard isn't working, except the power button. I had the same problem over the summer and had it repaired ~4 months ago. What should I do?

    The keyboard of my 11-inch MacBook Air, purchased in November 2011, isn't working at all. None of the keys respond except the power button. I'm able to restart the computer, and have done so multiple times. I've attempted SMC and PRAM resets, but they haven't worked.
    I've never spilled anything on the laptop, haven't stepped on it, and haven't otherwise damaged it ever. I use the laptop very lightly. I only use it to take notes for class, browse the Internet, and watch movies. I don't download anything but PDFs, PowerPoints, images, and Word documents. I don't even have music on it. So I don't think I had any part in creating the problem.
    I had this same problem with my laptop over the summer, and I took it into the Apple Store to get it repaired for $200. They told me that they didn't know the cause of the problem. I think they replaced the bottom half of my laptop entirely (receipt says there's a new "Housing, Top Case with Keyboard, US") and told me the problem was fixed. This was on June 30. The laptop keyboard stopped working again today, October 19. I called Apple Support and they told me that I would have to pay for the repair again because it's been 90 days since the last repair. I'm annoyed and upset that I have to pay $200 again to re-repair a problem that should've been properly fixed the first time. Plus, if the problem keeps happening despite multiple repairs, I can't afford to keep getting the laptop repaired over and over again due to the Apple employees' incompetence.
    Does anyone have any advice on how to fix the laptop? I'm a grad student and don't have the funds to pay for another repair, and there's no way for me to get to an Apple Store without hiring a car service, so I'm trying to avoid going to the store if possible. Thank you.

    Get the new keyboard at eBay and replace by yourself may be cheaper way, though you're required higher skill and well know about MacBook Air.
    http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0 .Xmacbook+air+2011+keyboard&_nkw=macbook+air+2011+keyboard&_sacat=0
    https://www.youtube.com/watch?v=gLbasVD69xo

  • Drag and Drop isn't Working

    For some reason drag and drop in the Finder isn't working.  If I click on a file or folder it highlights, but when I hold the click and attempt to move it, it stays put.  The cursor moves but it doesn't take the file or folder with it.  So I can't reposition folders and I can't move them to other folders or the Desktop.

    I restarted and the problem resolved itself.  That's going to be a work around for others experiencing the issue but I'm not fully satisfied with that being the case.  This only confirms there was some kind of bug in play and that the OS is vulnerable to these kind of issues.  I'm hopefull Apple will look into this as one of Mac OS X's strongpoints is supposed to be its reliability.

  • Best way to replace WSUS Server that isn't working?

    Hi, this is a followup (aka admission of defeat) to the post linked below.  Our SCCM installation was done in a hurry by one of my Coworkers about two months ago, and there are a few areas which are incomplete.   One of them happens
    to be software updates.   I have spent a great deal of time trying to troubleshoot why our clients aren't updating, and am realizing that my time might be better spent just replacing the WSUS server.
    Our setup:  All servers are hosted on Hyper-v.  SCCM 2012R2 is on server 2012R2.  The sql server runs on sql server 2012, on seperate 2012R2 machine.  WSUS is currently set up on a 2012 R2 machine, but it isn't working.  The WSUS
    server is configured to use the same SQL server instance as the SCCM server.
    If I take the step of replacing the WSUS machine, what would the best path be? Should I:
    Remove the software update point site system role as as described at the end of this document,
    http://technet.microsoft.com/en-us/library/gg712312.aspx    then just turn off the current wsus server?
    If so, do I need to worry about the SQL server, or can I just go about configuring a new WSUS server and adding it back in to SCCM?
    If anyone can point me to their favorite list of step by step instructions for getting software updates working with SCCM, I'd appreciate it.
    Thanks,
    Kevin
    My post from yesterday:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/b07516e4-757e-4ba8-889f-a33374a2c370/updates-not-applying-scan-failed-with-error-0x80072efd?forum=configmanagersecurity

    Yes, Thank you!  I did reinstall WSUS on a new server, which turned out not to be the root of my problem (Although, confirming that it was done properly was worth the time). 
    After reinstalling WSUS, I was still getting the error:
    Group policy settings were overwritten by a higher authority (Domain Controller) to: Server and Policy NOT CONFIGURED WUAHandler 4/9/2014 5:43:01 PM 3344 (0x0D10)
    After a bit more searching, I found someone suggesting setting the "Allow signed updates" group policy to not configured, in addition to  the "Specify intranet Microsoft Update Service Location".
    I also read that the SCCM client will take care of most update settings, so I also set "Configure Automatic Updates", and "Turn on recommended updates via automatic updates" to Not Configured, and my Endpoint Protection began updating nicely.
    Thanks for pointing me to Gerry's site, it's a great resource!
    Thanks also for helping.
    Kevin

  • Wacom Intuos III in CS4 64 bit - isn't work at all - help?

    Hello!
    I've just barely built myself a new computer and am running Vista 64bit.  I downloaded the trail version of Photoshop CS4 64 bit to play around and I noticed my tablet (Wacom Intuos 3) is not working in the program.  I move my pen and nothing happens for a long while.  After about 5 seconds, the cursor will move maybe 2cm but is largely unresponsive.  Completely useless for painting/animating.
    Is there anything I can do?  All my photoshop work is tablet based so I'm starting to freak out just a little bit here.  I'd really appreciate any help/advice .  Thanks!

    Thanks for the suggestions.
    I've tried everything listed and unfortunately nothing works.
    I was only using the trail to see if it was worth upgrading now that I have Vista 64 bit, and in the meantime I've re-installed CS3 on my new computer... only to discover my tablet isn't working in CS3 either... I wonder if it's time to panic yet!
    ETA:  I'm positive this isn't a problem with my tablet as it's working fine in other programs on this PC and on my other PC.  Sadly, that pc is an ancient relic so it's not as if I could use any version of CS on it.
    UPDATE:
    Disabling Vista's Tablet PC Input Service in Administrative Tools under the Control Panel is now allowing me to use my tablet in CS (it will at least move now).  However, there is no pressure sensitivity.

  • Broken CS 5.5 Design Standard Disc & Direct Link Install isn't working

    My Creative Suite 5.5 Design Standard disc isn't working and from my prior contact with Adobe, I was given the following links to help me install the program:
    http://prodesigntools.com/trials2/AdobeProducts/DSGN/CS5_5/win32/DesignStandard_CS5_5_LS1. exe
    http://prodesigntools.com/trials2/AdobeProducts/MDIA/CS5_5/win32/DesignPremium_CS5_5_LS1.7 z
    The files from the aformentioned links have completed downloading in the same folder (multiple times from multiple attempts) and I cannot get the program to install.  I am receiving the following error message:
    "The file archive part of Adobe CS5.5 Design Standard is missing.  You need all parts in the same folder in order to extract Adobe CS5.5 Design Standard.  Please download all parts."
    As I have made multiple attempts, (and the .7z link no longer works - Access Denied) all I can reason is that perhaps I was incorrectly given the "Design Premium" link rather than the appropriate "Design Standard" link.  Otherwise, I cannot figure out what I need to do differently to get this install to begin.  Any ideas?
    Thank you in advance for your help.

    those links are incorrect.  one is for design standard and one is for design premium.  they both must match, premium or standard depending on which you want.
    in either case, if you follow all 7 steps you can directly download a trial here:  http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
    and activate with your serial number.
    if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

  • My internet isn't working anymore, its not the wifi but the actual computer safari and google chrome. Its not loading particular websites, and if it is loading them, they are different to how they use to be. Computer was slow yesterday as well

    my internet isn't working anymore, its not the wifi but the actual computer safari and google chrome. Its not loading particular websites, and if it is loading them, they are different to how they use to be. Computer was slow yesterday as well and took about 4 hours to finally be able to shut down and close everything. Does anyone know how to fix this? Im going into exams and need my internet to work
    Thanks

    I dont know if your allowed to show images here but if you are then these pictures will show you what happens.
    This is what happens when I turn on my iMac (normal)
    This is what happens a few seconds after I turn on my iMac
    Here it is up close
    Hopefully these pictures will help you understand what's been hapening on my iMac when I turn it on.
    Thanks

  • Mpeg 2 export isn't working

    Using Final Cut, I'm exporting a .m2v file from Compressor 2 (I'm also using Dolby 2.0 for audio). It's a 90 minute movie so it's taking 8 hours. When it's finished, I have the icon of a white page with the top corner folded instead of an mpeg2 icon. When I try to open the file, Droplet opens. Can someone please tell me what I'm doing wrong???? I just want to make a DVD! Thank you, thank you.

    Once again, thanks for any advice. My next attempt
    is about to be to see how far I can throw SP into the
    lake.
    First things first... I know it can get aggrevating, but I would advise against it
    As for the source video, the pixel break-up is there. The scan lines don't seem to be in the source material, just on the DVD simulator.
    Simulator is not always 100% but seems like something else may be awry as below.
    The worst part of all of this -- and the most
    frustrating -- is that I've been making DVDs from SP
    for the last year. Suddenly, my way of making them
    isn't working. Just dragging an uncompressed QT on
    the menu and letting SP compress it before burning.
    (At the end of 8 hours, the file becomes off-line
    for some reason).
    Okay it sounds like something got corrupted or changed if everything was working fine and you are starting to get new errors, generic icons etc.
    Have you updated anything recently, changed version of OS X?
    Did you repair permissions before and after such changes?
    How did you do the updates (if OS) the incremental update or the larger one?
    The first thing to try is to set up a new user on the machine and see what happens. If it works under the new user, then it would seem that your user prefs have become corrupted and may need to be removed/rebuilt
    Is you internal drive starting to get full and are you doing everything off the one drive? Havee you run anything else such as Diskwarrior or Onyx? Do you leave your computer on for extended periods of time so the OS can run cron jobs? Have you been usinf DVD SP 3 and just moved to DVD SP 4?

  • 31.5 isn't working for me now

    I installed the newest upgrade last night, and now my email isn't working. I am now getting this when I open the application.
    "Unable to connect
    The connection was refused when attempting to contact live.mozillamessaging.com.
    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Thunderbird is permitted to access the Web."
    When I try manually to check messages, everything hangs.
    All other apps are working online, so I know it's not my connection. What's happened?

    Thank you, that was it!

  • IHeaderHelperBean isn't working - any ideas how to make it work?

    Hi,
    IHeaderHelperBean is one of the 3 or 4 predefined Spring Beans for Composites in SOA Suite. However, it isn't working for me as expected. I'm following the Oracle Tutorial by Ramkumar Menon "Predefined Spring Beans" available here: https://blogs.oracle.com/rammenon/entry/spring_framework_samples
    My code looks like this:
    @Autowired
    private IInstanceHelperBean instanceHelper;
    String fileName = instanceHelper.getComponentName() + "_" + instanceHelper.getComponentInstanceId() + ".txt";
    headerHelper.setHeaderProperty("jca.file.FileName", fileName);
    fileAdapter.write(message.getBytes());
    returnMsg = "Successfully wrote " + headerHelper.getHeaderProperty("jca.file.FileName");
    What I'm expecting is:
    - The filename of the generated file should be "SpringHeaderAccess_spring.txt"
    - The file should contain the message.getBytes() content
    - The return message should be "Successfully wrote SpringHeaderAccess_spring.txt"
    Instead I get:
    - The filename is SpringHeaderAccess_spring (".txt" missing)
    - The file is empty
    - The return message is "Successfully wrote null"
    If I comment out the following line:
    // headerHelper.setHeaderProperty("jca.file.FileName", fileName);Then I get:
    - The filename is "ToBeOverridenInTheComposite.txt" (this is what I had defined in my FileWriterService_file.jca xml file) - OK
    - The file is not empty, it contains the text I sent via WS in my EM Test - OK
    - The return message is "Successfully wrote (null)" - not OK.
    Does anyone know why I am not getting the expected behavior, or where to get help for this?

    Your phone is unsupportable. If it weren't for the physical damage and the fact that you opened it up and attempted repair yourself, you also downgraded iOS, meaning no one here or at Apple can help you at all.
    At least you're only out $20, plus the cost of the battery you bought.

  • The FormsCentral website isn't working.

    The website isn't working. When I go to sign in, it takes me to a blank gray screen. What is going on?

    This sounds like there might be an issue with your Flash Player. Have you tried another browser?
    Please try this remedy:
    1. Go to this link where you can manage your global flash player settings:
    http://www.macromedia.com/support/documentation/en/flashplayer/help/se ttings_manager03.html
    2. Make sure the "Allow third-party Flash content to store data on your computer" option is checked.
    3. Make sure the slider is set to a value other than 0
    4. Navigate away from the settings page (or close the browser window) to apply the changes.
    Now try to sign in to FormsCentral

  • GC isn't working: WLS runs out of memory and dies

    Periodically webservers just runs out of memory and dies. It looks like the garbage collection isn't working correctly and it never gets kicked off,
    Where can I configure the GC in weblogic?
    Have the min and max set to 512m,on WL92mp1, JDK 150_06. 40 - 50 concurrent users and this is a Financials system.
    Full thread dump Java HotSpot(TM) Server VM (1.5.0_04-b05 mixed mode):
    "NwWriter" daemon prio=5 tid=0x1abc9008 nid=0x1220 in Object.wait() [0x1fbdf000..0x1fbdfc1c]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x19e40930> (a bea.jolt.OutQ)
         at java.lang.Object.wait(Object.java:474)
         at bea.jolt.OutQ.getFromQ(OutQ.java:89)
         - locked <0x19e40930> (a bea.jolt.OutQ)
         at bea.jolt.NwWriter.run(NwHdlr.java:3980)
    "NwReader" daemon prio=5 tid=0x1d644e48 nid=0x2f8 runnable [0x1fb9f000..0x1fb9fc9c]
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.DataInputStream.readFully(DataInputStream.java:176)
         at bea.jolt.NwReader.run(NwHdlr.java:3625)
    "NwWriter" daemon prio=5 tid=0x1cf5e388 nid=0x1098 in Object.wait() [0x1f7df000..0x1f7dfa1c]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0def6e90> (a bea.jolt.OutQ)
         at java.lang.Object.wait(Object.java:474)
         at bea.jolt.OutQ.getFromQ(OutQ.java:89)
         - locked <0x0def6e90> (a bea.jolt.OutQ)
         at bea.jolt.NwWriter.run(NwHdlr.java:3980)
    "NwReader" daemon prio=5 tid=0x1ced8be0 nid=0x12c4 runnable [0x1f79f000..0x1f79fa9c]
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.DataInputStream.readFully(DataInputStream.java:176)
         at bea.jolt.NwReader.run(NwHdlr.java:3625)
    "NwWriter" daemon prio=5 tid=0x1ed1c408 nid=0x1494 in Object.wait() [0x1fadf000..0x1fadfc1c]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0dee6e30> (a bea.jolt.OutQ)
         at java.lang.Object.wait(Object.java:474)
         at bea.jolt.OutQ.getFromQ(OutQ.java:89)
         - locked <0x0dee6e30> (a bea.jolt.OutQ)
         at bea.jolt.NwWriter.run(NwHdlr.java:3980)
    "NwReader" daemon prio=5 tid=0x1abc8b80 nid=0x8ec runnable [0x1fa9f000..0x1fa9fc9c]
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.DataInputStream.readFully(DataInputStream.java:176)
         at bea.jolt.NwReader.run(NwHdlr.java:3625)
    "NwWriter" daemon prio=5 tid=0x1bf71bd8 nid=0x134 in Object.wait() [0x1fa5f000..0x1fa5fa1c]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0dee9db8> (a bea.jolt.OutQ)
         at java.lang.Object.wait(Object.java:474)
         at bea.jolt.OutQ.getFromQ(OutQ.java:89)
         - locked <0x0dee9db8> (a bea.jolt.OutQ)
         at bea.jolt.NwWriter.run(NwHdlr.java:3980)
    "NwReader" daemon prio=5 tid=0x1c6a7d98 nid=0x10cc runnable [0x1fa1f000..0x1fa1fa9c]
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.DataInputStream.readFully(DataInputStream.java:176)
         at bea.jolt.NwReader.run(NwHdlr.java:3625)
    "NwWriter" daemon prio=5 tid=0x1c5d2008 nid=0x8b4 in Object.wait() [0x1f6df000..0x1f6dfb1c]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0dee2370> (a bea.jolt.OutQ)
         at java.lang.Object.wait(Object.java:474)
         at bea.jolt.OutQ.getFromQ(OutQ.java:89)
         - locked <0x0dee2370> (a bea.jolt.OutQ)
         at bea.jolt.NwWriter.run(NwHdlr.java:3980)
    "NwReader" daemon prio=5 tid=0x1c88ed98 nid=0x8a0 runnable [0x1f69f000..0x1f69fb9c]
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.DataInputStream.readFully(DataInputStream.java:176)
         at bea.jolt.NwReader.run(NwHdlr.java:3625)
    "NwWriter" daemon prio=5 tid=0x006a2b58 nid=0x270 in Object.wait() [0x1f9df000..0x1f9dfc1c]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0decaf68> (a bea.jolt.OutQ)
         at java.lang.Object.wait(Object.java:474)
         at bea.jolt.OutQ.getFromQ(OutQ.java:89)
         - locked <0x0decaf68> (a bea.jolt.OutQ)
         at bea.jolt.NwWriter.run(NwHdlr.java:3980)
    "NwReader" daemon prio=5 tid=0x1c958920 nid=0x1680 runnable [0x1f99f000..0x1f99fc9c]
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.DataInputStream.readFully(DataInputStream.java:176)
         at bea.jolt.NwReader.run(NwHdlr.java:3625)
    "NwWriter" daemon prio=5 tid=0x1d9c0428 nid=0x17a8 in Object.wait() [0x1f85f000..0x1f85fb1c]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0decfa98> (a bea.jolt.OutQ)
         at java.lang.Object.wait(Object.java:474)
         at bea.jolt.OutQ.getFromQ(OutQ.java:89)
         - locked <0x0decfa98> (a bea.jolt.OutQ)
         at bea.jolt.NwWriter.run(NwHdlr.java:3980)
    "NwReader" daemon prio=5 tid=0x1abede28 nid=0x11d0 runnable [0x1f81f000..0x1f81fb9c]
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.DataInputStream.readFully(DataInputStream.java:176)
         at bea.jolt.NwReader.run(NwHdlr.java:3625)
    "NwWriter" daemon prio=5 tid=0x1c7b8540 nid=0x11f8 in Object.wait() [0x1fd9f000..0x1fd9fb1c]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0de98618> (a bea.jolt.OutQ)
         at java.lang.Object.wait(Object.java:474)
         at bea.jolt.OutQ.getFromQ(OutQ.java:89)
         - locked <0x0de98618> (a bea.jolt.OutQ)
         at bea.jolt.NwWriter.run(NwHdlr.java:3980)
    "NwReader" daemon prio=5 tid=0x1bf85510 nid=0x370 runnable [0x1fd5f000..0x1fd5fb9c]
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.DataInputStream.readFully(DataInputStream.java:176)
         at bea.jolt.NwReader.run(NwHdlr.java:3625)
    "NwWriter" daemon prio=5 tid=0x1c391b48 nid=0x1768 in Object.wait() [0x1fd1f000..0x1fd1fa1c]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0de9ff48> (a bea.jolt.OutQ)
         at java.lang.Object.wait(Object.java:474)
         at bea.jolt.OutQ.getFromQ(OutQ.java:89)
         - locked <0x0de9ff48> (a bea.jolt.OutQ)
         at bea.jolt.NwWriter.run(NwHdlr.java:3980)
    "NwReader" daemon prio=5 tid=0x1be90440 nid=0x10d4 runnable [0x1fcdf000..0x1fcdfa9c]
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.DataInputStream.readFully(DataInputStream.java:176)
         at bea.jolt.NwReader.run(NwHdlr.java:3625)
    "NwWriter" daemon prio=5 tid=0x1d2d0bd0 nid=0x1020 in Object.wait() [0x1f75f000..0x1f75fd1c]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0de5d3c0> (a bea.jolt.OutQ)
         at java.lang.Object.wait(Object.java:474)
         at bea.jolt.OutQ.getFromQ(OutQ.java:89)
         - locked <0x0de5d3c0> (a bea.jolt.OutQ)
         at bea.jolt.NwWriter.run(NwHdlr.java:3980)
    "NwReader" daemon prio=5 tid=0x1d3472d0 nid=0x10e0 runnable [0x1f71f000..0x1f71fd9c]
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.DataInputStream.readFully(DataInputStream.java:176)
         at bea.jolt.NwReader.run(NwHdlr.java:3625)
    "NwWriter" daemon prio=5 tid=0x1bf71a30 nid=0x1b0 in Object.wait() [0x1f95f000..0x1f95fd1c]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0de11e90> (a bea.jolt.OutQ)
         at java.lang.Object.wait(Object.java:474)
         at bea.jolt.OutQ.getFromQ(OutQ.java:89)
         - locked <0x0de11e90> (a bea.jolt.OutQ)
         at bea.jolt.NwWriter.run(NwHdlr.java:3980)
    "NwReader" daemon prio=5 tid=0x1ac06ab8 nid=0x17ec runnable [0x1f91f000..0x1f91fd9c]
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.DataInputStream.readFully(DataInputStream.java:176)
         at bea.jolt.NwReader.run(NwHdlr.java:3625)
    "NwWriter" daemon prio=5 tid=0x1bddfde8 nid=0x133c in Object.wait() [0x1ff9f000..0x1ff9fb1c]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0d4a71f0> (a bea.jolt.OutQ)
         at java.lang.Object.wait(Object.java:474)
         at bea.jolt.OutQ.getFromQ(OutQ.java:89)
         - locked <0x0d4a71f0> (a bea.jolt.OutQ)
         at bea.jolt.NwWrite

    There's nothing wrong with how GC works. If you don't give it anything to collect, it won't collect anything. You are simply not allowing enough memory to get anything done. As the other responder said, bump up the max mem to at least 1g. If it still fails, set it even higher. I can't tell what platform you're on, but if you're on Windows, you may be limited to about 1536m.

Maybe you are looking for