Allow Internet but block other network connections ?

I am using my Airport Extreme (b/g) only for connecting my Wii/Internet radio devices to the internet. I also have a NAS and my computers attached to the network but because the AE is set to WEP and I am worried it is too easy for someone to break in to it and get access to my shared data in the network.
My network is:
Netgear WNR3500L wireless router connected to:
DSL Modem
Netgear ReadyNAS
Netgear Powerline Adapter
Airport Extreme
So can I allow internet but no other network connections through the AE ?
Neil
Message was edited by: Neil Coxhead UK

My advise is..
If you do not have at least two game consoles behind this router, turn off UPnP in the router.
This is done in the router at Advanced -> UPnP.
By game consoles, any two..
#1 For example: X-box, PlayStation.
#2 A special type of computer with no keyboard or mouse. And it is usually connected to a TV.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

  • I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

    I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

    If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
    First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
    If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
    If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
    If you need more help please give the make, model, and version of your WiFi router and how you have it configured.

  • My mac won't connect to Internet but all other dev...

    hi there my Mac will not connect to the Internet but all other Apple and other devices will connect wirelessly can someone help ? Is it an issue with the IP address to the Mac or is it the DNS which is currently blank?

    Try these manual network settings.
    IP address      192.168.1.50
    Subnet Mask   255.255.255.0
    Default Gateway 192.168.1.254
    DNS Server    192.168.1.254
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Connect to internet, not via 3G, but via bluetooth network connection

    I am considering buying this iphone,
    and there are many options I can use to connect internet.
    so can an iphone connect to internet, neither via 3G nor via wi-fi, but via bluetooth network connection?

    The iPhone does not support tethering - at the present time anyway, which means using the iPhone as a modem for internet access with a computer, and the same in reverse - using a computer's internet connection to connect to the internet with the iPhone.

  • When trying to install downloaded software I am prompted to connect to the internet but I already am connected and the software will not install.

    When trying to install downloaded software I am prompted to connect to the internet but I am already connected. This also occurs when trying to install an Adobe update.

    A cable modem always needs a complete reset whenever you change the device that it is connected to.
    To get your Internet signal restored, it will require at least one major step including the reset of your modem and complete network power cycle.
    If that is not successful, the second major step is to reset the AirPort Extrreme back to factory defaults and then combine the steps above again.
    Try this first:
    Push the reset button on the cable modem (if present) and pull the internal batter (if easily accessible)  then power off the modem
    Power off everything else on your network....all devices....order is not important
    Wait at least 20 minutes...longer will not hurt
    Make sure that the Ethernet cable from the modem is connected to the WAN port (circle of dots or world icon) on the AirPort Extreme
    Re-install the modem battery if it was pulled in the step above
    Power up the modem and let it run for 4-5 minutes by itself
    Power up the AirPort Extreme and let it run for 4-5 minutes
    Power up each other network device one at a time about a minute apart until everything is powered back up
    Check the network for proper operation

  • I have problem when i want to update ios 6 to 6.0.1 this message appear " unable to verify update , ios 6.0.1 faild verification because you are no longer connected to the internet" but my ipad is connected . Plz help me .

    I have problem with my ipad ,  when i want to update ios 6 to 6.0.1 this message appear " unable to verify update , ios 6.0.1 faild verification because you are no longer connected to the internet" but my ipad is connected . Plz help me .

    Not very helpful but I have the same issue. Plugging in and doing the update via. iTunes will probably work but I find that whole experience annoying (downloading apps not on the Mac, etc..)

  • Internet Gateway Listed in Network Connections

    Anyone know why I would have an Internet Gateway listed in Network Connections?  If I disable it I cannot access the Internet.  No other PC in my home has this, except one desktop.  Running XP.
    Thanks
    Jim
    Solved!
    Go to Solution.

    My advise is..
    If you do not have at least two game consoles behind this router, turn off UPnP in the router.
    This is done in the router at Advanced -> UPnP.
    By game consoles, any two..
    #1 For example: X-box, PlayStation.
    #2 A special type of computer with no keyboard or mouse. And it is usually connected to a TV.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Use Group Policy to prevent other network connections

    I need to define a Group Policy which says that IF a user is in the companys Domain network that no other connections are avaiable. So if the user is not connected to the Domain network he should be able to connect to any network he wants.
    Are there any possible solutions to this?
    Best regards.

    Hi,
    >>Use Group Policy to prevent other network connections
    As far as I know, group policy can’t help us do this. However, when a user is in the company and there is just domain network, he or she may not be able to connect to other
    network.
    Best regards,
    Frank Shen

  • IMac connect to wi-fi but no internet but my other devices work fine

    I need some advice. I have searched the helps forum before posting so please advice what I need to do. I have tried some of the solutions from the forums but not working.
    My scnario...
    iMac (latest version) was working real good until 2 nights ago. It still connects to the wireless router and once a while get internet but 98% of the time, impossible to load anything. It will load very quick after reboot the system then it slows down to eventually dead....and then several minutes, it loads very fast for few seconds and went dead and repeat the same. I follow the network diagnostic to turn off the router, wait and turn back on....same issue. Then, I thought it might be virus or melware cause I downloaded some Songs from unknown site. I then installed virus and malware remover but still not working. I then tried to login to my router to check out but I cannot even login cause it will even get to the login page. So I thought router is bad but it's not. My wife's iMac, PC laptop, Apple TV, iPad, and Android Phones are all able to connect with 30MB speed. I have tried to follow the DNS thing and still not working.
    I use my iPad for AirPlay using same router so I am pretty sure the router is good and internet is good. So it only leave me with one thing, my iMac.
    Any help is greatly appreciated.

    Hello...I cannot say anything about the malware/virus question... BUT, I wonder if something got screwy with your Keychain. So I clicked on the Help in the menu at top of the screen, while I had system preferences open... There is a lot there to read.. I am in 10.7.4, so it may not exactly match what your machine says (do that search too, for precision).. but one thing that I think MIGHT be associated with your dilemma could be the following (did you set new passwords before when you did as BDAqua advised? That will do things...) the window I found:
    Applications that use passwords require your permission to retrieve your password from Keychain Access. An application may present a dialog asking you to confirm access to your keychain. The message may contain several options:
    Deny: Prevent the application from retrieving the password from your keychain. You need to enter the password manually.
    Allow Once: Grant Access to your keychain this time only. You’ll be asked again the next time the application needs to access the password.
    Always Allow: Allow the application to always retrieve the password without asking.
    If you want to allow an application, such as Mail, to always access your keychain without asking for a password, select “Always Allow.”
    Open Keychain Access, located in the Utilities folder in Launchpad.Open Keychain Access
    If you don’t see keychains in the left column, choose View > Show Keychains.
    Select a keychain, from the Keychains list. The application’s keychain would probably be in your login keychain.
    Double-click the password in the Keychain window, and then click Access Control.
    To allow all applications access to this password, select “Allow all applications to access this item.”
    To control access to this password, select “Confirm before allowing access.”
    To require the keychain password instead of the application password, select “Ask for Keychain password.”
    To add individual applications that can access this password, click Add (+), and then navigate to the application you want to add.
    Click Save Changes.

  • Won't open internet but says it's connected

    My ipad and iPhone are all on the Internet just fine. My MacBook pro shows it is connect to the Internet but when I open both Firefox and Safari it says "Server not found". I have restarted it many times and each time itt is supposedly connected to wifi but the Internet still wont open. Please help.

    Hello natalie2468,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your Mac is connected to a Wi-Fi network but it does not appear to have an active internet connection, then I'd like you to follow the troubleshooting in the article below.  Please follow the steps in the section "Symptom: My Mac does not connect to the Internet."
    Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
    Take care,
    Alex H.

  • TS3297 i can get on the internet but it says no connection in itunes

    I'm really confused it says I cannot connect to the internet on app store but I can use the internet in safari???? It also says I can't connect to the server on some of the games I have but not others   

    Hello blob1307,
    I would also be concerned if I could not connect to the iTunes or App Stores on my iPod touch.  I found an article with some steps to troubleshoot this:
    Troubleshooting on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
    Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to 3G, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet. 
    Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
    Try resetting (turning off and then on again) your Wi-Fi router
    If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connections or iOS: Troubleshooting Wi-Fi networks and connections.
    Note: All iPhone, and iPod touch models support 802.11b/g Wi-Fi networks. In addition, iPhone 4, and iPod touch (4th generation) support 802.11n Wi-Fi networks (2.4 GHz only).
    You can find the full article here:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • My ipad is not connecting to internet but shows wifi is connected

    My Ipad is not connecting to the internet ,but it is showing that Wifi is connected.

    The wifi symbol only indicated the presence of wifi. Not that it is connected.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How do I stop my Mac from asking if I want to allow iTunes to accept incoming network connections?

    Every time I open iTunes on my Mac, a drop down box asks me if I "want the application "iTunes.app" to accept incoming network connections?". I always click allow, but it's a pain to have to do this every time.
    Does anyone know how I can permanently stop this box from appearing?
    Thanks in advance.

    I have the same problem with Keynote.
    It's already set to accept incoming connections but it still asks whenever it's launched--annoying.
    Is there a fix?

  • Win7 Pro ws, connected to Active domain network SBS2K8 server, but firewall Public networks - Connected.

    Win7 Pro workstation shows active domain network but firewall thinks it's connected to Public Network. 
    Other Win7 Pro workstations in the same domain have no problems and show the correct Domain Network: Connected in the firewall panel. 
    SBS2K8 server can't see security status of, or offer remote assistance to this ws until it's firewall is disabled. 
    Domain name is correct. Machine IS logged into the domain. User has normal rights / Admin account. Just like everyone else.
    This system has current AV, but disabling it (not uninstalling) makes no difference. All the machine have the same AV.
    Not a wireless network, standard CAT5. Network connectivity appears normal: Access files on server share, browse internet, etc... all just fine.
    Already installed:
    http://support.microsoft.com/kb/2524478
    I've seen 
    http://social.technet.microsoft.com/Forums/en-US/7bce7005-b820-4340-a4c8-68025272d3aa/windows-firewall-falsely-shows-connected-to-public-network-when-my-computer-is-joined-to-domain?forum=w7itprosecurity
    But this is not a virtual machine. It does run the WinXP mode V but this is happening in the regular Win7 OS. 

    Went back to the machine today to check your suggestions, and... now it's correct!
    Hi,
    How many network adapter card do you have of your computer?
    Just the one. A Realtek PCIe GBE
    Check whether the DNS is the correct one you had deployed
    Yes, DNS is set to the 2k8 server IP as primary, and the secondary is OpenDNS. 
    and update the group policy by using this command ”gpupdate /force”.
    Done, didn't appear to log any changes.
    Check the registry key at  “HKEY_Local_Machine\Software\Microsoft\Windows\CurrentVersion\Group Policy\History\NetworkName”
    The NetworkName should be the domain name, when you get this done you will get a domain network profile, then restart your computer.
    This key does exist and is the correct domain name.
    More information refer to this article:
    http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
    I think this is the answer you want.
    Thanks for that. I've read through it and will keep it on file if the problem returns.
    Regards
    v-yamliu

  • IPhone 5s Unable to join home network but joins other networks?

    As in the question above, I just got a brand new iPhone 5s that worked perfectly with my home wi-fi for about 5 hours untill it suddenly decided it didn't enjoy being connected to it and immediatly broke the connection. after that I tried getting it to connect - even resetting network setting and restarting both device and router- but still the same message comes up "Unable to connect to 'Network'". I would really love some help on how I can fix this besides going to genius bar or something like that since there aren't any in my country. and I doubt the place I bought it from would give me a refund or replace it. Keep in mind that it still connects to other networks. It's just my home network that it's having problems with.  Also, other devices in my house are working just fine with the home network.

    If your device is connecting with other wifi devices other than that of your home local wifi/router you need to be thinking strongly about what is going on with the device that you aren't connecting with. How far in distance are you from the wifi at your residence? How old is the router you're using at home? After resetting your network settings have you ensure you took the time to reset the password from your mobile device to match that of your home routers password? If your device is working elsewhere just fine and not at home you may want to start your troubleshooting more towards the router rather than the mobile device.

Maybe you are looking for

  • Mac Pro early 2008 boots to black screen

    Four times out of five, on average, the Mac boots to a black screen -- a 30" Cinema Display. I believe the computer is booting all the way up, because I have the front power button set to put the computer to sleep, and when I manually power down the

  • Adobe Reader 9.1 crashes browser when clicking PDF links

    Steps to recreate issue: 1. With Adobe Reader 9 loaded on your Windows PC... 2. With ANY browser, go to any url where you can download PDF forms (ex. www.dlis.dla.mil/PDFs/DD2875.pdf  OR  http://www.irs.gov/app/picklist/list/formsInstructions.html an

  • Alerts not triggered  for a RFC Adapter

    Hi All, I have done the alert configuration for triggering alerts whenever there is a problem in any communication channels of any adapter.i.e. I have given * for 'where did the error occur'.Alerts are being triggered for JDBC and File adapetrs.but w

  • Download rental will not play

    We have downloaded the movie and it shows the full time in the status at the top.  It shows that we are at the begining, but when we hit play it says "Accessing the iTunes Store" the candy stripes run a little, then we are right back where we started

  • Pulse width measurement on two to four signals

    Using the shipped PWM measurement solution I am able to make this work as needed on one signal. I would actually like to be able to do this same measurement on up to 4 signals at the same time. First, is this possible, and second, can this be done us