Allow iOS users to change Skype ringtone or I am q...

This is not new. Yes it's duplicated. Because the idiots at Microsoft clearly don't listen to their users, subscribers and payers!
The Skype ringtone sucks.
It is incredulous that Skype has NEVER resolved this in an update.
I want to choose my own ringtones as I'm partially deaf and unless microsoft fix this, me, my global Enterprise and my entire workforce will blanket ban Skype from all our Systems and use FaceTime and FaceTime Audio instead.
Skype will lose a lot of unlimited subscriptions..
Wake up please.

True, but at least I won't be living out Cook's and Ive's pathological need to prove that they know better than Steve Jobs and Scott Forstall did.
Jobs may have been criticized for being a tyrant, but now we see the foolishness that his perfectionism was restraining. If I had idiots like the ones who designed this mess working for me, I'd be jumping down their throats on a regular basis too. Without his influence, the Jobs wannabes are now letting their freak flags fly and it ain't pretty.
Anyone who seriously thinks that iOS 7 looks great is either a "Millenial" who has been brainwashed to think that all change is automatically good (and look where else that has gotten us, but I digress) or a random townsperson straight from the story of the Emperor's New Clothes. I suppose another possibility is that they are Miley Cyrus's clothing designer, and thus have absolutely no taste.
Apple has now voluntarily thrown it's intricate and elegant designs away in favor of a poorly implemented Android clone (that is, if an Android device were thrown in a blender with cotton candy and a My Little Pony play set). Why should I continue to pay a huge premium for Apple when it now just looks like everything else? Might as well buy the real thing and pay less versus paying much more for a cheap, nauseatingly pastel clone.
So sure, yeah. I'll stick with my iPhone 4 running iOS4 until it finally dies, and then switch. The Andoid fan boys who govern their forums can't possibly be as condescending as the one's here.
Later

Similar Messages

  • In ALV Report ,a field to allow the user EDIT/CHANGE

    Hi Guys,
    My requirement is
    in the ALV Grid display iam having 10 fields.5th field should be allow the user EDIT/CHANGE mode.
    what ever he enters the value the same should be updated to an custom table.
    EX.
    o/p:
    0001   0002   0003   0004   0005   0006   0007  0008   0009   0010
    Now the user changed the value 0005 to 0011.
    0001   0002   0003   0004   0011   0006   0007  0008   0009   0010
    now 0011 should be updated in custom table.
    to do this process please suggest a best way for coding.
    thanks in advance.
    Sunil.

    hi
    *& Report  ZTESTDEMO_INTERACTIVE_LIST_2
    REPORT  ZTESTDEMO_INTERACTIVE_LIST_2.
    TABLES: MARA,MARC,MARD.
    * internal table itab_mara 3 fields matnr, ernam,mtart
    DATA: BEGIN OF ITAB_MARA OCCURS 0,
    MATNR LIKE MARA-MATNR,  " material number
    ERNAM LIKE MARA-ERNAM,  " name of person who create
    MTART LIKE MARA-MTART,  " Material Type
    END OF ITAB_MARA.
    * internal table itab_marc 3 fields matnr, werks,lvorm
    DATA: BEGIN OF ITAB_MARC OCCURS 0,
    MATNR LIKE MARC-MATNR,
    WERKS LIKE MARC-WERKS,  " Plant
    LVORM LIKE MARC-LVORM,  " Flag Material for Deletion at Plant Level
    END OF ITAB_MARC.
    * internal table itab_mard 2 fields
    DATA: BEGIN OF ITAB_MARD OCCURS 0,
    MATNR LIKE MARD-MATNR,
    LGORT LIKE MARD-LGORT,  " Storage Location
    END OF ITAB_MARD.
    SELECT-OPTIONS: S_MTART FOR MARA-MTART.
    INITIALIZATION.
    S_MTART-LOW = 'HALB'.
    S_MTART-HIGH = 'HAWA'.
    S_MTART-OPTION = 'BT'.
    APPEND S_MTART.
    START-OF-SELECTION.
    SELECT MATNR ERNAM MTART FROM MARA INTO TABLE ITAB_MARA WHERE MTART IN
    S_MTART.
    PERFORM DISPLAY.
    TOP-OF-PAGE.
    WRITE:/2(15) 'MATERIAL NO',20(20) 'CREATED BY',45(15) 'MATERIAL TYPE'.
    FORM DISPLAY.
    LOOP AT ITAB_MARA.
    WRITE:/ ITAB_MARA-MATNR UNDER 'MATERIAL NO' HOTSPOT ON,ITAB_MARA-ERNAM
    UNDER 'CREATED BY',ITAB_MARA-MTART UNDER 'MATERIAL TYPE'.
    HIDE: ITAB_MARA-MATNR.
    ENDLOOP.
    ENDFORM.
    AT LINE-SELECTION.
    CASE SY-LSIND.
    WHEN 1.
    SELECT MATNR WERKS LVORM FROM MARC INTO TABLE ITAB_MARC WHERE MATNR =
    ITAB_MARA-MATNR.
    PERFORM DISPLAY1.
    WHEN 2.
    SELECT MATNR LGORT FROM MARD INTO TABLE ITAB_MARD WHERE MATNR =
    ITAB_MARC-MATNR.
    PERFORM DISPLAY2.
    when 3.
    sy-lsind = 0.
    ENDCASE.
    FORM DISPLAY1.
    LOOP AT ITAB_MARC.
    WRITE:/ ITAB_MARC-MATNR HOTSPOT ON, ITAB_MARC-WERKS,ITAB_MARC-LVORM.
    HIDE: ITAB_MARC-MATNR.
    ENDLOOP.
    WRITE:/ SY-LSIND.
    ENDFORM.
    FORM DISPLAY2.
    LOOP AT ITAB_MARD.
    WRITE:/ ITAB_MARD-MATNR, ITAB_MARD-LGORT.
    ENDLOOP.
    WRITE:/ SY-LSIND.
    ENDFORM.
    regards
    ravish
    <b>plz dont forget to reward points if helpful</b>

  • Hi All,i am currently working on a flex application that will allow the user to change the language

    Hi All,i am currently working on a flex application that will allow the user to change the language within the application from english to Japanese and vice versa. And everything works fine.
    I am using flex 4.5
    We allow the user to save records with english or japanese texts.
    problem
    When the user manually enters Japanese text and tries to save it the record defaults back to the default name (which is in english). But if you copy the entered text and paste it and then save it.It works fine.
    Any idea , why this is happening?
    Please let me know if the question is not clear.
    Looks like there was already a bug
    https://issues.apache.org/jira/browse/FLEX-28894?page=com.atlassian.jira.plugin.system.iss uetabpanels:all-tabpanel
    Not sure why does it say , Resolved .
    -KB
    Message was edited by: bKartik.b

    By Payal integration , you mean paypal button html ? or payment gateway setup etc ? If its a gateway configuration for your site domain then single page for all layout will work , but if you are using button code for all renditions then you would need to create separate pages for all.
    Thanks,
    Sanjit

  • Display some constant in the input field and allow the user to change it.

    Dear All,
    I have a requirement in WDA to display inputfield with some constant initially and allow
    the user to change that value according to his wish.Currently I am using UI Element
    InputField for this,but I am not able to show the constant initially.
    How can I achieve this pls suggest.
    Thanks,
    Reddy.

    Hi sudhir,
    To display with default values, you need to write your code in wddointi method.
    Check this code..
    * navigate from <CONTEXT> to <INPUT> via lead selection
      lo_nd_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
    * get element via lead selection
      lo_el_input = lo_nd_input->get_element( ).
      lv_ship_point = '1001'.
    * set single attribute
      lo_el_input->set_attribute(
        name  =  `SHIP_POINT`
        value = lv_ship_point ).  // Now ship_point have initial value 1001.
    Cheers,
    Kris.

  • Allowing multiple users on one Skype ID

    I was wondering if allowing multiple users online one Skype ID is possible, I currently run a small business, where the majority of the customers use skype just for text chatting, not the call features.
    I was looking to hire employees, but use the same skype thats associated with my current reputation. It also helps when I get return customers, since it'll be available to all workers.
    The last 2 times I tried setting this up, my skype got locked, and I wouldn't be able to afford for it to get locked.
    I was wondering if anyone had any suggestions about the feasibility of this.

    Being doing this idea for years and really was hoping for more development.
    Bottomline when a call comes in and either I answer the call or let my staff answer the call. Then later i can see what happened.
    Unfortunity each new call is not populating outlook with an automactic new record so notes could be made.
    Currently we name the client with notes on back end eg: John Smith ..wants to buy main street call back asap.
    This is crazy way to make notes on incoming calls but there no was to conert to a task or an appointment.... One day .....i can only dream.

  • Allow restricted user to change Proxy Settings

    I have an OS X 10.4.11 MacBook Pro that has 2 accounts. One local administrator account and one restricted Network mobile account authenticating against an LDAP domain. All users are required to go through a proxy to get out to the internet. The proxy is not accessible outside our network. This means the proxy settings have to be change when the user takes his laptop out of the office. However since the user has a restricted account he does not have permission to change the proxy information.
    Is there away I can allow this user to change the proxy settings or even change a Network Location with out giving him administrator privileges.?

    Hi msaner, and a warm welcome to the forums!
    Haven't found the answer just yet, but...
    /System/Library/CoreServices/SystemUIServer.app/Contents/Resources/Autoload.plis t
    contained some interesting strings after finding changing permissions on the PrefPanes didn't work, like...
    _airportCanLoad

  • How to allow a user to change Payment terms on A/R documents

    Hi All,
    I want to allow one of my user to change payment terms on A/R documents. I could'nt found it where to authorize a user for this purpose. Can anybody help me out with this?
    BR

    Dear Naveed,
    To enable users to change the Payment Terms in A/R, please give the user Full Authorization for Price Lists (Inventory -> Price Lists -> Price Lists).
    Hope this helps.
    Regards,
    Lorna

  • Allow Domain Users to Change Their Time On Workstation

    Is there a way to allow authenticated users on the domain to change their time on their workstations?  Ive added Domain Users, Domain Computers and Users to the Computer Configuration/Policies/Windows Settings/Security Settings/Local Policies/User Rights
    Assignment in the Default Domain Policy but nothing seems to change.  Ive forced the GP update as well.
    Any help would be appreciated.

    Hi Scottdog129,
    Based on my understanding, you have configured a GPO which allow that authenticated users  can change system time. However, this GPO does
    not apply successfully. Right?
    In addition to jkrato's suggestion, please follow the steps below to check if the GPO is applied to the clients. It is useful for us to narrow down the cause:
    Click
    Start, type rsop.msc in the search box to access
    Resultant set of policy.
    Check if the GPO is applied to these clients and the setting of the GPO is correct.
    In addition, if the GPO has applied to these clients, please check if there are some other GPOs have conflicts with this GPO in these clients.
    For your information ,please refer to the article Change the system time to get more help:
    http://technet.microsoft.com/en-us/library/dn221970.aspx
    Regards,
    Lany Zhang

  • Allow DB user to change their password

    Greetings,
    DAD authenticated access to HTMLDB 2.0 on 10gR1 on hpux.
    I have built a "account" page where among other things the users can change their passwords, I have built the page over anonymous PL/SQL (below). When a DAD authenticated user runs the page via HTMLDB, they get
    ORA-01031: insufficient privileges
    Error. Yet if I copy the PL_SQL as is into sqlplus and bind it... it works like a charm. Any ideas?
    the PL/SQL
    DECLARE
    BEGIN
    if (:P17_NEW_PASSWORD_1 IS NOT NULL) AND (:P17_NEW_PASSWORD_2 IS NOT NULL) AND (:P17_OLD_PASSWORD IS NOT NULL) THEN
    if :P17_NEW_PASSWORD_1 != :P17_NEW_PASSWORD_2 then
    raise_application_error(-20300,'New passwords do not match');
    end if;
    execute immediate 'alter user '||user||' identified by '||:P17_NEW_PASSWORD_1||' replace '||:p17_old_password;
    htp.p('Password Changed Successfully');
    end if; --passwords not null
    exception when others then
    htp.p('Error changing password:'||sqlerrm);
    null;
    end;

    The application parsing schema (owner) needs ALTER USER privilege. It probably works in SQL*Plus because that schema has obtained the privilege through a role.
    Scott

  • Using alter user to change oracle password for logged in web user on XE

    Hi All
    I'm building an app using the pl/sql web toolkit on XE (installed on Win XP Pro SP2). (I'm not using the APEX front-end).
    I'm using basic authentication and oracle database user accounts, and when a user registers for the first time I create them an oracle user account with dynamic sql, followed by some initial setup stuff, and they then log in with it.
    All fine so far.
    However I want to allow the user to change their oracle password as part of maintaining their user details. I've done this in the past using the web toolkit and Oracle 9i and it has worked fine using dynamic sql.
    Unfortunately I can't get the same thing to work in XE.
    For example, if I create the following procedure in the schema aligned to the DAD which holds my application and then run it from a browser (IE or Firefox) then the
    Browser and the db just hangs - not even an error message:
    CREATE OR REPLACE PROCEDURE ut
    AS
    v_stmt varchar2(300);
    BEGIN
    HTP.htmlOpen;
    HTP.headOpen;
    HTP.title ('User Test');
    HTP.headClose;
    HTP.bodyOpen;
    v_stmt := 'alter user "'||user||'" identified by "BERT"';
    htp.print(v_stmt);
    EXECUTE IMMEDIATE v_stmt;
    htp.print('Done');
    HTP.bodyClose;
    HTP.htmlClose;
    END;
    If I run the same statement in SQL*plus it's fine, and if I run the same proc for a different user then it's fine too.
    I'm sure it's something to do with trying to change the credentials of the currently logged in user, but I would at least have expected an error message.
    I'd be grateful for any ideas.
    Thanks
    Steve

    Hi g.myers
    Thanks for your response.
    Sorry, yes, bad turn of phrase there. It's not the entire db that hangs. The web browser (either IE or FF) hangs, and if I look at v$session at this point, I can see that the user STATUS=ACTIVE and the STATE=WAITING.
    I should also point out that I am using standard Oracle users as users of the application, (e.g. create a new user account called TESTER1). These users are then granted the appropriate privileges on the owning schema in order to run the app, access the tables etc.
    Therefore it is the user account (e.g. TESTER1) that is running the password change procedure that is owned by the SYS schema. (However again, this is the exact code and method that I've used in the past and it has worked fine).
    If I leave the browser hanging long enough, it will eventually return with the following error:
    Proxy Error
    The proxy server received an invalid response from an upstream server.
    The proxy server could not handle the request POST /h/hopapp.pwdmaint_do.
    Reason: Error reading from remote server
    cheers
    Steve

  • Allow the user to control the width of the edit forum post input box

    I would like to control the width of of the edit-forum post input box.  This could be:
    automatically adjust the width of the box so that the box doesn't run off the right edge of the window.
    have a user global preference to set the preferred width
    at least, allow the user to change the width via the change size icon.  The three horizontal bars at the lower left of the input box. You can adjust the vertical dimension, but not the horizontal. TenFourFox 4.0.1. This is probably being blocked for some obscure reason.
    Here is an example of an over extended right margin:
    Curiously enough, the "software" let's me adjust the width & height of the add reason to edit text, but not adjust the width of the more important edit text box.
    Robert

    Testing
    Standard Reply box can be height adjusted but not width.
    Same with Advanced Editor
    No Adjustment at all in HTL Editor
    Edit.
    The Edit uses the Advanced Editor
    Only Height Adjustment again.
    I do seem to remember someone posting about the width and saying they could drag it over the edge of the right hand edge (Into the grey surround)
    This may have been a post in the lounge.
    It didn't actually try it at the time but have played with it since and have not seen it.
    Maybe it is something they "Fixed" in both senses of the word.
    Second edit.
    I can't alter the box that currently reads "Message Edited by:- ..."
    I also can't get this box to accept New lines  (they appear in the box but don't post that way)
    Corrected Spelling
    9:51 PM      Wednesday; May 11, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously
    Message was edited by: Ralph Johns (UK)
    Message was edited by: Ralph Johns (UK)
    and new line with a line space as well

  • When creating a fillable form fields from an existing pdf file, how do you set or allow end user to set the font size in the fields?

    I successfully created a form filled pdf using an existing pdf document.  However, the font size is too large to allow end user to type in information in the form box.  Is there a way to 1)globally set all  of the form fields when generated to a much smaller font size &/or 2) allow end user to change the font size if needed to put all information in one box without font being so large?

    Hi DenisonDoc,
    There is no option right now to set properties globally primarily for Text fields. You may make sure fields doesn't contain anything.
    Select all the text filed from the form and right click any of the selected field make sure all of them are selected choose properties --> Appearance there you can choose Font Size and Font type.
    - End users cant change size and type of font. It is up to designer.
    Regards,
    Ajlan Huda.

  • ISE 1.2 Guest portal user cannot change their passwords

    I have a WLC 5508(version 7.6) and a server installed  the ISE (version 1.2.1.198)，Now we configured the CWA，Use guest portal as an employee and guest login url，We can use the manually create internal user and password successfully logged in, and we set up allow guest users to change password in Multi-Portal, but the user can not change the password in the guest portal ,I suspect the change password option on the Guest  Portal actually works? Can anyone tell me how to change their own username password in the guest portal ?

    Requiring Guests to Change Password
    You can allow or require guest users to change their password after their initial account credentials are created by the sponsor. If guest users change their passwords, sponsors cannot provide guests with their login credentials if they are lost. The sponsor must create a new guest account.
    You can either allow guests to change their passwords, or you can require that they do it at expiration and at first login. To require internal users using a guest portal to change their password upon their next login, choose Administration > Identity Management > Identities > Users . Select the specific internal user from the Network Access Users list and enable the change password check box.
    Before You Begin
    Create a Guest portal or modify the DefaultGuestPortal. This setting is specific to each Guest portal.
    Step 1 Choose Administration > Web Portal Management > Settings > Guest > Multi-Portal Configuration.
    Step 2 Check the Guest portal to update and click Edit .
    Step 3 Click the Operations tab.
    Step 4 Check either or both options:
    Allow guest users to change password
    Require guest users to change password at expiration and first login
    Step 5 Click Save .

  • Restrict users from changing roles

    Is there a way to restrict users from changing roles
    themselves? If a user goes to My Connections and then clicks Edit,
    they could, in theory, change to any group they want--except to the
    administrator group because you have to enter a password. If the
    admin isn't watching the site 24/7, the user can change their roll,
    let's say from a writer to a publisher, and publish something
    before the admin can notice.
    Is there anything that can be done to restrict that?

    You can use connection keys...this will only allow a user to
    change their name and email address (I think...I can check on this
    tomorrow). We use these at my work and it allows for a lot more
    control over who is assigned to the proper groups.

  • How to allow user to change SAP Portal password by themselves

    We would like to allow user to change SAP Portal password by themselves. However, I added role Manage_My_Password and Manage_My_Profile to a user account. After logoned with this user account and opened the option 'Personalize'. I only find the page allow me to customize the page layout. But I haven't find tab for changing profile and password.
    Pls advise.
    Thanks.
    Edward

    Hi Edwar,
    You can hide the pages from portal personalization workset. copy the workset and select the page and click on property -> select Invisible in Navigation Areas ->yes
    You can find the workset under
    Portal content->End user content->Standard Portal Users>Workset->Portal Personalization
    If you want a custom developed application fro change password see the below blog
    A Change Password Application
    Hope it helps
    Regards
    Santosh

Maybe you are looking for