Allow moves in EIS

Hi.
This is EIS Release: 9.3.1.0.0 on Windows 2003.
When I'm using a Dimension Build Rules File to manage the members load I have the option in the Dimension Build Setting to Allow Moves.
"Allow moves: Moves members and their children to a new parent in the same dimension. Also, use this option to recognize primary members in the outline and match them with the data source. This option cannot be selected if the Ignore conflicts option is selected. To view shared members, use Outline Editor."
I have a new model created with Essbase Integration Services. Is there an option in EIS similar to the Allow moves?
I see in the "outline build" tab, in the proerties of the dimension, a disabled "Move Members" option. But the help says the following about this option:
"Move members": To move duplicate members within recursive hierarchies. This option is the default when the hierarchy is recursive.
My hierarchy is not a recursive one.
Any Hints on how to accomplish this?
Regards,

Not sure how to enable this.
Maybe they believe that the source data should be clean enough so that option is not needed?
I always delete all members before reloading, so the "Move Data" is not needed.
Robert

Similar Messages

  • Allowed Movement types for a Particular plant..

    Hi All,
    Please let me know is there any option available in SAP to configure the allowable movement types for particular plant ?
    Most urgent
    Thanks
    Chandru

    Did you ever find a way to do this?  We have a similar requirement that we want to allow some of our users to use movement type 501 but not all.  We would also like to restrict another movement to only be allowed in certain plants within our company.  Our basis person is saying that this can't be done but I was certain that it could.

  • HT1551 I am able to rent move through Apple TV but unable to watch. Asked to decrease resolution to potential allow movie to be viewed. What is the problem? Oliver

    I am able to sign onto and rent movies through Apple TV. Unable to watch. Asks to decrease TV resolution to potentially allow viewing. What is the problem? New TV with new router.

    Hi vazandrew, thanks for your help, Ive just checked, both home sharings ie Apple TV and itunes on my laptop, and they were both on , but for the heck of it, I turned them off and back on again. I still have the same problem.
    Im looking in purchased films, am I looking in the right place ?
    Thanks

  • Quiz allowing move to next slide without answer

    I have a problem with the user being able to bypass the quiz without answering.
    The global preferences are set to Required - the user must take the quiz to continue.
    The quiz is set up so that pressing the submit button gives a custom correct/incomplete/failure feedback caption.
    Actions are set to On Success and On Failure (with 1 attempt) to Go to the next slide.
    There are also forward and back buttons.
    If the user does not take the quiz but instead hits the forward button they can advance without answering the quiz.  When we tried removing the forward button the user could still move forward by clicking on the screen twice.
    If the user answers the quiz and hits submit they get the correct caption but the slide does not advance to the next slide on both success and failure conditions.
    We've been beating on what should be a simple bug for a week now and failed to find a solutions so we could really use some expert insight.
    I am running Captivate 8 on a Mac

    I think you messed up the embedded features of the question slides. Have a look at:
    Question Question Slides in Captivate - Captivate blog
    Personally I will never allow Backwards movement at all in a quiz. If you do that, you can drag the Next button under the Clear button. The Next button has a double functionality: during the Quiz it acts as a Skip button and that is what you do not want. During Review it acts as a Next button. If you do not use Review, you don't need the Next button. If you want Review, dragging the Next button under the Clear buttons solves the problem: during Review both Clear and Submit button will disappear and the Next button will be come available.
    I cannot see directly what happened with the actions that are not executed, unless you have another shape button on the question slide that pauses after the pausing of the Submit button.
    Your setting 'Required....' can cause problems as well, especially since you allow free navigation within the quiz (and outside) with the Back and Next navigation.
    Please, try to read that blog post, and if you have more questions, will try to answer them.

  • Allow mov type 261 and 262 for a material type only

    Requirement is to allow movt type 261 and 262 for a particular material type.( Assume Only 261 - 262 issue transactions happen against that material type.)
    User to be restricted, while material issue (migo), for the material type XXXX to 261 - 262 movt type only.
    No any other movt type allowed for this material type while issuing material.
    All suggestions welcomed.
    Regards,
    Rakesh

    Thanx amit.
    But same user uses all other movt types for other material type also.

  • Closed lid still allows movement

    Hi,
    is it normal that the screen of my new macbook can be moved a bit to the side (left and right) when closed. I'm talking about only a milimeter and guess it's because it's magnetically locked and not mechanically.
    But I was just wondering if that is normal?

    Hey McDomi,
    mine has the same 'issue'. When the screen is opened it's fastened tightly into place, but when closed it feels slimsy and the screen will move from side to side when I'm carrying it in a sleeve. After handling a friend's MacBook which had the same 'issue', I consider this 'behaviour' normal for a MacBook.
    I think the latch just keeps the MacBook closed but is in no way strong enough (and/or intended) to hold the lid exactly into place. It's probably because of the hinge (ie. if the hinge were too rigid the screen would probably be harder to open but when closed the lid would then stay in place).
    Hope that helps.

  • ITunes 10.5 (on Win7 Pro) will not allow movies (.mp4) to be added to the Movie library.

    In the previous release, iTunes 10.4.080, I had no problem with drag & drop of movies (.mp4) from a windows folder to the Movies library.  After installing 10.5 today I have lost the ability to sync my own .mp4 content with my iPad.  Any help or suggestions would be appreciated.

    Similar problem here, one pc with iTunes 10.4, the other with a fresh install of everything, including iTunes 10.5. My online classes use iTunes U for lectures. They download fine on the 10.4 version but 10.5 does not save them at all. I am now actively searching for a 10.4 install executable......

  • Allow movement of split location in before/after comparison

    It would save me a lot of time if the before/after split location was movable. If I'm developing a portrait of two people, the split usually goes right between the two people, so I can't get a good feel for how the after affect "the other" person. Also, for off-center shots, the split does no good at all to help adjust the subject.

    Hi,
    Refer report MB51
    here in selection screen enter mvmt types 313 and 315 and execute
    Here add following fields in layout;
    Entry Data and Time of Entry and anlayse the time duration for the movements 313 and 315.

  • Start  up disk won't allow movie download

    I was downloading a movie onto my G4 laptop and it stopped about half was through and posted a notice that "start up disk is almost full" and it gave instruction to empty the trash and also delete some files. So I took some TV shows off and emptied the trash. Still the same prompt. What is the solution to this problem? Any ideas?

    I would suggest you look at getting a couple things from OWC or someone you know.
    A 2nd (and 3rd) SATA drive.
    A couple FW800/400 drives for backups. Two sets.
    A universal case ($109) that will take an SATA drive and work off eSATA, FW800/400 and USB2 interface.
    A copy of Disk Warrior, Data Rescue II, TechTool Pro 4.5.1.
    A severely corrupt directory can actually prevent a CD or DVD from booting! (they still try to scan the bus for valid bootable systems on startup).
    A FW case might let you mount the drive later.
    Discjockey (same folks as Data Rescue and Drive Genius) is a contained unit, no need to use the drive in a bootable system, that can do sector copies if Data Rescue won't (but costs ~$300+).
    Preventative maintenance hands down is always easier than after the fact

  • Outline Load Util - Is there a "Don't allow moves" option?

    There isn't one in the documentation but I am hoping someone knows the hidden option!?!?
    (I am not saying that there is a hidden option, just hoping!)
    Thanks

    You might find this useful for identifying what has moved though...
    select obj.*
    from lthbud.hsp_object obj
    where obj.object_type = '45'
    and     exists (select object_name
                        from lthbud.hsp_object objt
                        where objt.object_type in ('32','33')
                        and objt.object_name = obj.object_name)
    and     obj.object_name not between 'E6000' and 'E9999'--balance sheet exclusions                   
    order by
                2 ascAt least this way provided you have a 'snapshot' of your before picture you can police and rectify moves.
    regards,
    Robert.

  • Type password to allow Move to Trash

    When I want to delete sth. It always needs password.When I finished type,it didn't move to trash.It's Gone.Why?Why I need password to move to trash?

    Try recreating the Trash file, because this is a problem related to permissions. Open Terminal (in /Applications/Utilities) and type:
    sudo rm -ri ~/.Trash
    For more information, see > http://www.thexlab.com/faqs/trash.html

  • I can't drag to rearrange tabs in 9.0.1 - click and holding over a tab doesn't grab it to allow movement?

    I am using Firefox 9.0.01 on both my Windows 7 PC and an OSX machine. On the OSX machine I can drag tabs to re-arrange them. On the Windows PC I cannot drag tabs. I looked in the tab settings but didn't see anything obvious? I have removed all Add-ins just to make sure, but I am running pure Firefox currently. Any ideas?

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • EIS move members

    Hi,
    I have in my outline SECURITIES under ENTITIES. Some of the securities have moved from one entity to another in my source DB. So I want to move those members without losing all my data.
    In EIS, I tried to to do a member load with 'delete all members first' and 'incremental update' (increments only my SECURITY dimension). This process fails. Checking the log file, it seems it doesn't delete all members before trying to load. There are messages saying that he found duplicate member names and that user decided to ignore them. It's true it is set in the properties in my outline, and that's why I'm deleting the members first, so that he doesn't find duplicates.
    The other thing is I saw in the SECURITY properties that there is an option for duplicate member names 'move members' but it's not possible to select it. Does someone which settings allow to access that option ?
    Thanks,
    Cyril

    Hi
    I think you have added recursion to ENTITIES dimension. Deleting the recursion for ENTITIES dimension table will allow Move members option.
    To do this:
    Open the OLAP model, select ENTITIES dimension table, go to Edit->Properties->Table
    Click on Physical Joins tab
    Select the row under column1 and delete.
    Gangadhar

  • Not Allowing Goods Movements for the confirmed quantity in the delivery

    Hi Gurus,
    I would like know how to make the system not allowing movement for a batch at MB11  when that batch of one material is confirmed in a delivery? 
    ex: In the delivery: material number: 9009, Batch  0000A and quantity is 10. And there is no more quantitty in the warehouse for Batch 000A and material number: 9009.
    Dont allow any movement type for 9009 and 000A batch.
    Thanks a lot

    Hi,
    As far as my understanding there is no such provision,
    Check is there any option to block assigned batch temporarily, so system can not consider it for next business transaction
    Kapil

  • EIS - Dimension Rebuild

    HiWe are using EIS to rebuild a the department dimension every month. Some departments (level 0) move within business units (level 1). I have done all I can to get a department (dept1) to move from one business unit (Customer Support) to another (Maintenance). Within EIS I have defined a recursive parent/child relationship within the source Oracle table. Within the metaoutline for the dimension holding Business Units & departments I have selected Properties: Outline Build and "Allow Move" within "Duplicate Member Names". When we rebuild the dimension (using incremental build) I get a nasty error message telling me dept1 cannot be loaded as it is a duplicate. There is only one dept1 in the source table from the star schema. I can only conclude that the "duplicate" error message applies to the Essbase outline and the "Allow Move" in "Duplicate Member Names" means Duplicates in the source table!. When I manually go and edit the generated load rule to "Allow Moves" and then do a dynamic dimension build the results are as expected - dept1 move to Maintenance! HOW can I get EIS to move the level0 member (dept1) to it's new parent (Maintenance) ??

    pls provide me the details of true dimension and also when we are creating the dimensions it is saying the latter option what does this mean

Maybe you are looking for