Allow only authenticated users to enter the internet

Hi guys.
I have an ASA 5510 with IOS 8.4. I want that only authenticated active directory users can pass the firewall.
I don't have a clue how to solve that.
Can somebody give me a hint?
WBR
Robert Fenz

Robert,
You might also want to take a look at the following ASA feature:
PIX/ASA : Cut-through Proxy for Network Access using TACACS+ and RADIUS Server Configuration Example
http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_configuration_example09186a00807349e7.shtml
The above only applies if you have a TACACS+ or RADIUS server as a backend authentication server though.
Regards.

Similar Messages

  • On and iPad how to Allow User To Enter Custom Text  (Dropdown only) Enables users to enter a value other than the ones in the list.

    On an iPad, how do I :
    Allow User To Enter Custom Text
    (Dropdown only) Enables users to enter a value other than the ones in the list.'?

    Are you using the built-in Currency option under the Format tab? If so,
    what you're describing should not happen.

  • Cisco ISE Failure: 24408 User authentication against Active Directory failed since user has entered the wrong password

    Hi,
    Since we implemented Cisco ISE we receive the following failure on several Notebooks:
    Authentication failed : 24408 User authentication against Active Directory failed since user has entered the wrong password
    This happens 2 or 3 times per Day. So basically the authentications are working. But when the failure appears, the connection is lost for a short time.
    The Clients are using PEAP(EAP-MSCHAPv2) for Authentication. We've got a Cisco Wireless Environment (WLC 5508).
    Why is this happening?
    Thanks,
    Marc

    The possible causes of this error message are:
    1.] If the end user entered an incorrect username.
    2.] The shared sceret between WLC and ISE is mismatched. With this we'll see continous failed authentication.
    3.] As long as a PSN not receiving a response from the supplicant within this limit during an EAP conversation, it will throw this error code. In majority of cases it says eap session timed out.
    In your cases, the 3rd option seems to be the most closest one.
    Jatin Katyal
    - Do rate helpful posts -

  • How to Restrict user to enter the data in CAPS ONLY

    Hi,
    I have textinput in my page,i have to restrict the user to enter the data caps only.
    can any one help me on this.
    Karthik

    Hi,
    h1.
    I have textinput in my page,i have to restrict the user to enter the data caps only.
    -------u need to set the CSS class for this item
    Regards
    Meher Irk
    Edited by: Meher Irk on Oct 24, 2010 11:16 AM

  • Why am I receiving a notice to update my version and then not able to click on it? It also prevents me from entering the internet if I put my computer to sleep with this update box there!

    The box appears after I'm on the internet. It's on my desktop when I go to shut down my computer and after I've shut down the internet. When I click on the x it doesn't disappear. When I click on the box indicating Yes, I'd like to update my version of Firefox it does nothing. If I leave this box there and put my computer to sleep it stays on and actually prevents me from entering the internet! I need to restart my computer or shut down! My computer is a MacBook Pro and is only one year old .

    They have to know who the person is who has their account set up wrong?   Do you know who they are or how to identify them?
    if not, how do you expect Verizon to find which user that is?
    Best thing for you to do is set up a mail filter and just throw those into the trash or delete them the second they come into your email box. 
    here are a couple walk throughs. 
    How to Filter Mail from a Certain Sender Easily in Win Live Mail, Outlook Expr.

  • Intermittently, when I try to enter the internet through Safari, it freezes up and won't fully load in the internet. If I turn the iMac off and start it again, it seems fine. I have had my internet provider check everything from their end.

    Intermittently, when I try to enter the internet through Safari on my Imac, it freezes up so that the loading line only goes 1/3 way across and then stops. If I shut down the computer and then restart, it usually loads fine. I have had my internet provider check eveything form their end and it is fine. I suspect that I have a software conflict. My provider and others have said that I should use FireFox because Safari is not that stable. I am running OSX Maverick on my system. This was a recent download.  Is anyone else having this problem and have you any ideas how I can correct it.    

    If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic  test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help to identify which such modifications you've installed, as well as some other aspects of the state of the system that may be pertinent.
    Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: You copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, paste again. That's all there is to it. Details follow.
    You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, proceed anyway.
    Below are instructions to run a UNIX shell script. It does nothing but produce human-readable output. However, you need to be cautious about running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
    The script will line-wrap or scroll in your browser, but it's really a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
    If you have more than one user, and the affected user is not an administrator, then please run the script twice: once while logged in as the affected user, and once as an administrator. The results may be different. The administrator is the user that is created automatically on a new computer when you start it for the first time. If you can't log in as an administrator, just run the script as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Triple-click anywhere in the line of text below on this page to select it:
    clear; PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && o=$(sed 's/^/   /' <<< "$o") && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(egrep -v '^[[:blank:]]*($|#)' "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; a=$(id | grep -w '80(admin)'); [[ "$a" ]] && sudo true && r=1 || r=; { [[ "$a" ]] || echo $'No admin access\n'; [[ "$a" && ! "$r" ]] && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(($(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0));  PN "Pageouts (MiB)"; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$( printf 'User %s%%\t\tSystem %s%%' ${s[1]} ${s[3]} ) || o=; PR "Total CPU usage"; [[ "$o" ]] && o=$(ps acrx -o comm,ruid,%cpu | sed '2!d'); PR "Max %CPU by process (name, UID, %)"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; [ "$r" ] && { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; }; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2> /dev/null | pbcopy; exit
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately, leaving the Terminal window empty. If that doesn't happen, press the return key.
    If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter your password, the script will run anyway, but it will produce less information. In most cases, the difference is not important.
    The script may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "[Process completed]" to appear in the Terminal window.
    You can then quit Terminal. The output of the script will have been copied to the Clipboard automatically. All you have to do is paste into a reply to this message by pressing command-V again.
    Please note:
    ☞ This procedure is all copy-and-paste — type only your login password when prompted. When typing it, you won't see what you're typing. Make sure caps lock is off.
    ☞ Remember to post the output. It's already in the Clipboard when you see "[Process completed]" in the Terminal window.
    ☞ If any personal information, such as your name or email address, appears in the output, anonymize it before posting. Usually that won't be necessary.

  • How to restrict the user to enter the item in purchase order?

    I want to restrict user to enter the item in purchase order.
    How can i do this?
    Please help
    Abhishek

    Hi,
       You may create a transaction variant for ME21N in SHD0 transaction. Make the item field as output only as shown below:
    Result:
       You may check the doc: Learning SHD0 with Example
    Regards,
    AKPT

  • Wireless users are loosing the internet connection....

    Dear All, My wireless users are loosing the internet(http and https) connection many times per day. I just check the ports configuration in the switch, but The problem persist. The device is a Cisco Aironet 1130 AG. Someone have some idea???
    Sent from Cisco Technical Support iPhone App

    Dear All, My wireless users are loosing the internet(http and https) connection many times per day. I just check the ports configuration in the switch, but The problem persist. The device is a Cisco Aironet 1130 AG.
    You are barking the wrong tree.
    Can you please elaborate further?
    I need to determine whether the clients are loosing WIRELESS connection or loosing WAN connection.  Two different things, two different directions to choose from.  
    The easiest way to determine is this:
    Presume you have 10 clients and half the clients are associated to one WAP and the other to the other WAP.  Your description states that all 10 clients would loose internet connectivity.  Is this correct?  If this is so, then we start with your switch and your WAPs.  How are the WAPs powered?  PoE or power injector?  Can you console into the WAPs?  Can you post the output to the commands "sh version" and "sh logs"?  How about the switch?  Can you console into the switch?  Can you post the output to the commands "sh version" and "sh logs"?

  • FM for populating internet user details in the internet user tab of a BP

    Hi  Everyone urgent requirement ,
    I have a unique requirement , I have created a BP and assigned it with internet user role which as usual has Internet user TAB where a Internet user details have to be assigned . I have a creted a user also but can some one tell me which FM i can use to link the user created with the BP. 
    any help or suggestions are highly appreciated and will reward the points  .

    Hi Ram,
    Sorry for the delay but I was on holiday . If you still want the solution here it is :
    FM that has to be used is : COM_BPUS_INTERNETUSER_CREATE for internet user creation .
    And to update the internet user details in the internet user tab use : CRM_BUPA_CREATECENTRALPERSON .
    Regards,
    Reddy.

  • Can web content overlay  refresh when a user re-enters the page?

    I have a page that has  a web content overlay that id like to refresh when a user re-enters the page.
    To be exact i have a photswipe gallery that works great butid like it to restart from the beginning when a user renters the page

    There is no simple way to disable swiping to a new page. You could put an empty scrolling frame in, I suppose, but I don’t see how that would make the reader’s experience very good.
    Bob

  • HT201699 My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

    My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

    Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&amp;T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&amp;T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work

  • Two user profiles on my iMac but only one can connect to the internet

    Hi,
    I got the most recent upgrade for Lion and installed it.  I have two user profiles on my iMac and now, only one of them can connect to the internet yet both appear to have gotten the full upgrades.  Any ideas why this might be happening?
    Thanks!!

    Does the Account that can not connect to the Internet have full Administative priveleges or is it a Standard Account. If Standard, check to make sure it is allowed to connect.

  • How to allow, user to enter the free text in smart forms and Drop Down list

    Hi Experts,
    How to provide the user to enter text in smart forms? ie Once the smartform generated, there the user allowed to enter text.
    And also is there any option to provide Dropdown list  in smart forms.
    Possible give with example with clear idea.
    Its very urgent!!!!
    Thanks in Advance!!!

    Hi!
    No, there's no way to it, because Smartform is just like a piece of paper, it can't handle any objects, after it is ready.
    It can be printed out/archived/sent on email as an attachment and that's all. It cannot be modified after it is completed.
    Regards
    Tamá

  • Why doesn't apple allow you to download files from the internet like how android users can?

    I was using a friend's android phone yesterday and saw that he could download files a wide variety of files from the internet and that made me wonder why Apple doesn't allow iPhone users to download files like the ones you could on an android device

    To keep the sort of malware rather prevalent for Android devices off of your iPhone. Depending on what you need to download, though, you can probably find a third-party app that will do it. Since such apps keep their documents in their own sandbox, it helps protect the iPhone from being infected by malicious "documents".
    Regards.

  • How can I lock access to Firefox so that only I can fo on the internet and not other users of my computer?

    I have a computer which I let several other people use, but I don't want them to have access to the internet. I would like to see if there is a "lock" choice so that no one else can access the internet - or another means? I've tried to select "Lock" to the whole computer (when it gives you the "lock," "shut down," "sleep," etc. choices - and it says the computer is locked but the next time I try it it opens the computer (and internet) just like it never was "locked" so I don't even know how to effectively lock the whole computer either as a second option to block access ot the internet!

    I had the same problem (issue with Google Apps and XUL runner etc) of needing to downgrade. To pull it off I went to the main Firefox download page (http://www.mozilla.com/en-US/firefox/new/) and followed the link to OTHER SYSTEMS AND LANGUAGES which took me to a page that included a link on the right hand side to download Firefox 3.6.16.
    (The stuff below pertains to Windows. If you are on a different OS your steps will vary)
    To do the actual downgrade (and there may be some other steps that would be wise to take but this is what worked for me) I merely renamed "c:\Program Files\Mozilla Firefox" to "c:\Program Files\Mozilla Firefox bad" (in case I want to try troubleshooting the issue later) and then ran the "Firefox Setup 3.6.16.exe" file that downloaded from that link. That solved my problem and I'm back and running 3.6.16.
    In case you don't feel comfortable changing things in your Program Files directory you might try a different approach and try uninstalling via the Control Panel and Add and Remove Programs (or whatever it is called on the version of Windows you are on) and then running the installation file. I didn't go that route so I can't tell you how well that might work.

Maybe you are looking for