Allow only changes in specific Metadata Group

Hi,
I have users that are only created for the duplicator we are using.
I would like them to browser all items we have but cannot make changes to any of them - except one Metadata Group that I have created (in this group there are relevant status informations about duplication - as these accounts will be used by many different users I do not want them to be able to do too much..)
"duplication" is an own group with the users in there, I have also created a new Permission Set "duplicator" and assigned it to the group. But in the "Trait Permission" tab of the Permission Set it does not let me "Inherit / Permit / Forbid" for my Metadata Set?
Is there any way to solve this issue?
thanks
tobi

Tobi:
I'd start with creating a clone of the Review permission set then set Forbid to Edit Details for metadata group you'd like to restrict.

Similar Messages

Managing WLAN only in a specific Ap-Group.

Hi,
I would like to schedule the enable or disable of a specific WLAN only in a specific AP-Group.
Is possible to do with a Prime?
Regards.
Mirko Severi.

I don't think that is possible, since the WLAN has to be enabled/disabled on the WLAN itself. Ifyou don't see a setting on the AP Group to do this, then there is no way PI can do this also. Here is an older doc with WCS scheduling you can still do in Classic Theme:
https://supportforums.cisco.com/document/58081/managing-wireless-lan-status-schedules-automatic-enabledisable-feature
Scott

Cisco ACS 5.3 - How to only allow specific AD groups to login

Can anyone help me figure out what I have wrong or have missing?
I've configured three specific AD groups, Admin, Storage, and HelpDesk, with their own commands sets.
This seems to be working fine, but everyone can log into everything, but they can't do anything except exit.
My goal is to not allow anyone to login that is not part of the three AD groups I have specified with the respective command sets.
All the logins hit the Admin account, even though the id in AD is not in the that AD group. I have something screwed up.

Check your authorization rules, make sure the default rule isnt set to Permit. Group Mapping is only mapping AD groups to internal ACS groups, we need to check your authorization rules to see which policies they users are hitting, you may want to reset the hit count and test to see which policy is allowing access.
Thanks,
Tarik Admani
*Please rate helpful posts*

Can we lock down user admin functionality to allow password changes only?

Hi,
Is it possible to lock down the user admin functionality so a specific role can only change passwords?
We have a large user base of >10K infrequent users that are forced to change their passwords every 30 days. We suspect a lot will require password changes and we are keen to not have the tech team spending most of their time dealing with such requests. We would like to pass this task onto data management but not allow them the system administrator functionality.
We know we can create a responsibility with a limited menu available so the operator can see only the security/user/define menu. But this will still allow the person to add responsibilities to existing user accounts and create new user accounts, both of which are deemed unacceptable security risks. Is it possible to lock down the form as well as the menu? Allowing operators to only change the password of existing users? Or can we use the custom.pll to error when a user tries to do anything except edit the password field when in this role?
Thanks
Matt

You should be able to do that. You would create a new privilege level (ie 7), assign all commands to that level except (this is my guess) the command vpn-sessiondb, you would put that at a lower privilege level (ie 6). Here's a write-up that may help getting you in the right direction.
http://www.packetpros.com/2012/08/read-only-asdm.html

Forbid a user group to modify an specific metadata field??

Is it possible to forbid a user group to MODIFY an specific metadata field or group of fields?
I know you can create a new metadata SET and forbid the user group to modify the entire set, but what about groups or fields??
Any help is welcome

it is not possible. I had a sort of work around, when I enabled the metadata group only on the production creation, but then it is not visible in Metadata tab.

How to allow only the specified users/groups to open my pdf files...

Hi there,
I'm looking for resources/documents describing how to allow only the specified users/groups to open my pdf files by the Java API...
I've found a sample code creating a policy in the following document.
http://livedocs.adobe.com/livecycle/es/sdkHelp/programmer/sdkHelp/wwhelp/wwhimpl/js/html/w whelp.htm?context=sdkHelp&topic=learn_lc_sdk_invokeremoting
( API Quick Starts (Code Examples) > Rights Management Service API Quick Starts > Quick Start: Creating a new policy using the Java API )
But the sample code doesn't set recepients( users/groups ) who can open the pdf file.
How can I make it ?
Any samples ? or Does anybody can tell me which Java classes/methods I should use ??
Policy#addPolicyEntry(PolicyEntry policyEntry) ??
PolicyEntry#setPrincipal(Principal principal) ??
or none of them ?
Any hints are appreciated !
Thanks.

I'm not exactly sure what you are tying to do here, but typical approach when issuing one PDF par user/groups scenario goes like:
1. Create policy for specific purpose and add principal (user/group)
2. Apply policy on server side
3. Deliver the file (via email etc...)
If you are looking for sample codes, try quick start.
http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/help/wwhelp/wwhimpl/js/html/w whelp.htm?&accessible=true
If you go "API Quick Start/Rights Management Service API Quick Starts", you might find something useful. I think you need "Creating Policies" or "Modifying Policies" for step 1 above, and "Applying Policies to PDF Documents" for step 2.
Hope this helps.

Outlook 2010 using Windows XP - sync specific contact groups only

Hi -
I have an iPhone 4, and I sync it with specific contact groups (work and personal) in Outlook on two different PCs (work and personal) - which used to work.
I'm now usings iTunes 10.2.2.14 and it doesn't on my PC with XP which has Outlook 2010. Instead of syncing my specific folders, it tries to sync ALL of my contacts.
In iTunes, I click on Info < check the "Sync Contacts with" box < choose "Outlook < choose "Selected groups" < check the boxes for my specific folders (do not check the "Add contacts created outside of groups on this iPhone to:" box) < click apply and it starts to sync
You're asked if you want to merge or replace, I click merge, and then it asks me if I want to change my 407 contacts - that's my entire contact list! I don't want that in this computer's outlook ... I only want to sync the folders that I selected.
Note that this process does, however, work using the same iTunes version on my PC with Windows 7 and Outlook 2003.
Help! (and thank you)

Exchange 2013 doesn't support MAPI RPC, it has to use RPC over HTTPS, a.k.a., Outlook Anywhere (or POP or IMAP, which are inferior) so it sounds like everything is working as designed.
The password being rejected for Outlook Anywhere suggests that you have a configuration error. Run this command:
Get-OutlookProvider -identity EXPR | FL CertificatePrincipalName
and make sure that this matches the CN of your certificate. XP has a problem when it doesn't. You can change it with Set-OutlookProvider if need be.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Allow only SI units for specific materials

Dear all,
I need to do a change in order to allow only SI units for some material types.
Do you know a customizing which already does it (better if it can be specific for some material types).
Or should I develop an user exit (which table should I check to know if it's a SI unit) ?
Thanks in advance for your answers.

Thanks Ajit but my users wants to specify only some material types. I think I have to do a user exit and create a specific customizing table with all material types

Exporting Images With Only Specific Metadata

How do I export images from Aperture with only specific metadata. Example: I want to export my images with only the copyright IPTC metadata (and maybe the keywords or contact info etc., but I don't want the world to see the EXIF data.
Aperture manual (page 507 I think) says to do this I need to make a separate version with only the metadata I want to appear. Er right? How does one do that then Apple!? I know how to make another version by the way, but how can I switch off/strip the exif, but keep the IPTC? Surely the monment I tick the include metadata checkbox in the Export panel and hit go this EXIF data will be inserted as it is inherent with the file?
Can anyone enlighten me please?
Kevin

Time to hit the Aperture feedback page. If you include metadata, you include the EXIF data.
About all you could do is export with no metadata, import the new 'stripped' file and then lift-n-stamp the IPTC data onto it, then export that.
Ian

FBV0 Post only - do not allow to change parked document

I had FBV0 access to post parked document, no complaints.
But, i should not be able change parked document.
can we restrict FBV0 to Post only - do not allow to change parked document ??
Thanks.

Dear P1023,
To segregate the authority to park and to post, i suggest that you
either
- use the exit provided by SAP note 361420 (BTE 1140) to deactivate the posting/
parking button depending on users.
OR
- set up a validation to prevent a users from posting/parking
OR
- Use workflow to release the park documents.
I hope this helps.
Mauri

Allow distribution group members only to send to distribution group

Is it possible to allow the members of a distribution group to be the only ones permitted to send to the distribution group? I've read up on this and I think it's possible with a custom RBAC role. Any other ideas?
Thanks!

You don't need RBAC for this - you just need to go to the Mail Flow Settings
tab and open the Message Delivery Restrictions properties. Add the group to the
Accept messages from: Only senders in the following list. This will limit it so that only messages from members of the group can send to it.
You can also use the shell to do this by running:
Set-DynamicDistributionGroup -Identity <group name> -AcceptMessagesOnlyFromSendersOrMembers <group name>

Change Customer Address format with specific customer group

Dear all,
May I ask is it possible to change customer address fomat for a specified customer group or Company code only.
Normally, the format is Street, City and Country. for a special cusomer group, i wan to change the format to street , street 2, street 3 and street 4.
Is it possible to change the format without affect other cusomer group and also not affect Vendor address format?
I have seached in the format, some discussions provides method to change address format by country. But no discussion mention about change cusomer specified customer group only.
Can anyone advise?
Many thanks
Sunny

Hi,
Did you try for
1.By changing field status in it account groups through transaction code OBD2.
2. In transaction code OB21 for company code.
Regards,
Tejas

Approve suppliers only for specific material groups

Dear Experts,
Current scenario: Our purchasers can buy products from all material groups from every boarded supplier. E.g. they can buy production materials from an office paper supplier.
Target scenario: The moment a purchaser buys a material that's not part of the approved material group of that specific supplier, he get's an error.
What is a practical way to achieve this?
Thanks a lot,
Steffen

Normally we maintain Source lists, which restrict the list of vendors from whom certain materials can be purchased.
Sometimes you can also create a Material group level contract, and then in the PO specify the materials from that specific material group.
but ideally you should go for source list, as it is the simplest and standard way to control approved suppliers for materials. I know its not at material group level , but still its the best option.
Last case, you can go for a development , use the BADI ME PO PROCESS CUST i think it is.

How to set a MessageTextInput to be Read Only for a specific row?

Hi,
In Benefits Self Service, particularly the Update Beneficiaries page, it lists all your eligible Beneficiaries including yourself. The table has the following columns displayed for each beneficiary: Beneficiary, Relationship, Social Security Number, Primary %, Contingent %, Clear. This is the page where you allocate the Primary % and the Contingent %. The Primary % and Contingent % are MessageText Input.
We have a requirement that we wouldn't want an employee to designate himself/herself as a beneficiary. However, the employee is being listed as a beneficiary along with all the other eligible beneficiaries. Oracle says it is an intended functionality to include the employee in the beneficiary. Is there a way thru Controller Object extension to set the Primary % and Contingent % as Read Only but only for the row corresponding to the employee to prevent the employee from accidentally allocating himself/herself as a beneficiary.
I know there is the SPEL functionality but this requires me to add a transient attribute to the View Object corresponding to that table. But everytime I make a change to the View Object either by adding a transient attribute or some other changes, I end up getting an error on the standard Relation attribute of that view object. The error is something like "Relation set attribute failed for View Object". I cannot get pass this error and I'm not sure what's causing this. I see other people in this forum have encountered the same problem when extending view objects but no specific solution was offered nor any clear explanation of the cause.
So I thought if there's any way this could be done thru Controller Object extension. If so, please let me know how. The challenge for me I think is finding the bean corresponding to those Message Text Input but only for a specific row in the table.
Thanks,
Ronaldo

Hi,
I also tried extending the View Object but without changing anything to the SQL so it is exactly the same as the standard view object but I still get the "Attribute set for Relation in view object BeneficiaryPeopleVO1 failed". Based from this, extending the view object whether any change has been made or not affects the standard transient Relation attribute.
Here is the standard XML definition of the View Object if anyone is curious
<ViewObject
Name="BeneficiaryPeopleVO"
BindingStyle="Oracle"
CustomQuery="true"
RowClass="oracle.apps.ben.selfservice.enrollment.server.BeneficiaryPeopleVORowImpl"
ComponentClass="oracle.apps.ben.selfservice.enrollment.server.BeneficiaryPeopleVOImpl"
MsgBundleClass="oracle.jbo.common.JboResourceBundle"
FetchMode="FETCH_AS_NEEDED"
FetchSize="10"
UseGlueCode="false" >
<SQLQuery><![CDATA[
SELECT pcr.person_id person_id,
pen.prtt_enrt_rslt_id prtt_enrt_rslt_id,
con.first_name ||' '||con.last_name || ' ' || con.suffix Beneficiary,
con.national_identifier Ssn,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) contingent_pct,
con.person_id bnf_person_id,
con.business_group_id,
pen.per_in_ler_id,
pbn.pl_bnf_id pl_bnf_id,
pbn.object_version_number object_version_number,
pbn.effective_start_date,
pcr.contact_type contact_type,
con.full_name beneficiary_full_name,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) Db_Primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) db_contingent_pct,
DECODE(pbn.pl_bnf_id, null, 'DeleteIconDisabled', 'DeleteIconEnabled') delete_switcher,
pen.pl_id pl_id,
pen.oipl_id oipl_id,
nvl((select 'Y' from dual where (to_date(:1 , 'rrrr/mm/dd') between
          nvl(pcr.date_start,to_date(:2 , 'rrrr/mm/dd')) and
          nvl(pcr.date_end,to_date(:3 , 'rrrr/mm/dd'))) and
          (pil.lf_evt_ocrd_dt <= nvl(con.date_of_death,pil.lf_evt_ocrd_dt))), 'N') rel_exists_flag
FROM per_people_f con,
per_contact_relationships pcr,
ben_pl_bnf_f pbn,
ben_prtt_enrt_rslt_f pen,
     ben_per_in_ler pil
WHERE pcr.personal_flag = 'Y'
AND (pbn.pl_bnf_id is not null or
(to_date(:4 ,'rrrr/mm/dd') between
nvl(pcr.date_start,to_date(:5 ,'rrrr/mm/dd'))
AND nvl(pcr.date_end,to_date(:6 ,'rrrr/mm/dd'))
          and pil.lf_evt_ocrd_dt <= nvl(con.date_of_death,pil.lf_evt_ocrd_dt)))     --Bug 4297137
AND pcr.contact_person_id = con.person_id
and pen.person_id = pcr.person_id
AND pbn.bnf_person_id (+) = con.person_id
AND to_date(:7 ,'rrrr/mm/dd') between pbn.effective_start_date (+)
AND pbn.effective_end_date (+)
AND pcr.person_id = :8
and pen.prtt_enrt_rslt_id = :9
and to_date(:10 , 'rrrr/mm/dd') between con.effective_start_date and con.effective_end_date
and to_date(:11 , 'rrrr/mm/dd') between pen.effective_start_date and pen.effective_end_date
and pil.per_in_ler_id = pen.per_in_ler_id
and pil.per_in_ler_stat_cd NOT IN('VOIDD', 'BCKDT')
and pbn.prtt_enrt_rslt_id (+) = :12
and ((to_date(:13 ,'rrrr/mm/dd') between
nvl(pcr.date_start,to_date(:14 ,'rrrr/mm/dd')) and
nvl(pcr.date_end,to_date(:15 ,'rrrr/mm/dd'))) or
((pcr.date_start = (select max(pcr2.date_start)
from per_contact_relationships pcr2
where pcr2.contact_person_id = pcr.contact_person_id
and pcr2.person_id = pcr.person_id
and pcr2.personal_flag = 'Y')) and
not exists (select null
from per_contact_relationships pcr3
where pcr3.contact_person_id = pcr.contact_person_id
and pcr3.person_id = pcr.person_id
and pcr3.personal_flag = 'Y'
and to_date(:16 ,'rrrr/mm/dd') between
nvl(pcr3.date_start,to_date(:17 ,'rrrr/mm/dd'))
and nvl(pcr3.date_end,to_date(:18 ,'rrrr/mm/dd')))
and (pbn.pl_bnf_id is null or
exists (select null from ben_per_in_ler pil2
where pil2.per_in_ler_id = pbn.per_in_ler_id
and pil2.per_in_ler_stat_cd not in ('VOIDD','BCKDT')))
GROUP BY pcr.person_id,
pen.prtt_enrt_rslt_id,
con.last_name,con.first_name,con.suffix,
con.full_name,
con.national_identifier,
pcr.contact_type,
con.date_of_birth,
con.person_id,
con.business_group_id,
pen.per_in_ler_id,
pl_bnf_id,
pbn.object_version_number,
pbn.effective_start_date,
pen.pl_id,
pen.oipl_id,
          pcr.date_start,
          pcr.date_end,
          pil.lf_evt_ocrd_dt,
          con.date_of_death
union
SELECT to_number(null) person_id,
pen.prtt_enrt_rslt_id prtt_enrt_rslt_id,
con.first_name ||' '||con.last_name || ' ' || con.suffix Beneficiary,
con.national_identifier Ssn,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) contingent_pct,
con.person_id bnf_person_id,
con.business_group_id,
pen.per_in_ler_id,
pbn.pl_bnf_id pl_bnf_id,
pbn.object_version_number object_version_number,
pbn.effective_start_date,
'SLF' contact_type,
con.full_name beneficiary_full_name,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) Db_Primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) db_contingent_pct,
DECODE(pbn.pl_bnf_id, null, 'DeleteIconDisabled', 'DeleteIconEnabled') delete_switcher,
pen.pl_id pl_id,
pen.oipl_id oipl_id,
'Y' rel_exists_flag
FROM per_people_f con,
ben_pl_bnf_f pbn,
ben_prtt_enrt_rslt_f pen,
     ben_per_in_ler pil
WHERE
pbn.bnf_person_id (+) = con.person_id
AND to_date(:19 ,'rrrr/mm/dd') between pbn.effective_start_date (+)
AND pbn.effective_end_date (+)
AND con.person_id = :20
and con.person_id = pen.person_id
and pen.prtt_enrt_rslt_id = :21
and to_date(:22 , 'rrrr/mm/dd') between con.effective_start_date and con.effective_end_date
and to_date(:23 , 'rrrr/mm/dd') between pen.effective_start_date and pen.effective_end_date
and pil.per_in_ler_id = pen.per_in_ler_id
and pil.per_in_ler_stat_cd NOT IN('VOIDD', 'BCKDT')
and (pbn.pl_bnf_id is not null or pil.lf_evt_ocrd_dt <= nvl(con.date_of_death,pil.lf_evt_ocrd_dt))     --Bug 4297137
and pbn.prtt_enrt_rslt_id (+) = :24
and (pbn.pl_bnf_id is null or
exists (select null from ben_per_in_ler pil2
where pil2.per_in_ler_id = pbn.per_in_ler_id
and pil2.per_in_ler_stat_cd not in ('VOIDD','BCKDT')))
GROUP BY pen.prtt_enrt_rslt_id,
con.last_name,con.first_name,con.suffix,
con.full_name,
con.national_identifier,
con.date_of_birth,
con.person_id,
con.business_group_id,
pen.per_in_ler_id,
pl_bnf_id,
pbn.object_version_number,
pbn.effective_start_date,
pen.pl_id,
pen.oipl_id
ORDER BY 3,14
]]></SQLQuery>
<DesignTime>
<Attr Name="_isCodegen" Value="true" />
<Attr Name="_version" Value="9.0.3.13.75" />
<Attr Name="_CodeGenFlagNew" Value="36" />
<Attr Name="_rowSuperClassName" Value="oracle.apps.fnd.framework.server.OAPlsqlViewRowImpl" />
<Attr Name="_objectSuperClassName" Value="oracle.apps.fnd.framework.server.OAPlsqlViewObjectImpl" />
</DesignTime>
<ViewAttribute
Name="PersonId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PERSON_ID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="PrttEnrtRsltId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PRTT_ENRT_RSLT_ID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="Beneficiary"
IsQueriable="false"
IsPersistent="false"
Precision="332"
Type="java.lang.String"
AliasName="BENEFICIARY"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="Ssn"
IsQueriable="false"
IsPersistent="false"
Precision="30"
Type="java.lang.String"
AliasName="SSN"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="PrimaryPct"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Type="oracle.jbo.domain.Number"
AliasName="PRIMARYPCT"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="ContingentPct"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="CONTINGENTPCT"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="BnfPersonId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="BNFPERSONID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="BusinessGroupId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="BUSINESSGROUPID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="PerInLerId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PERINLERID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="PlBnfId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PL_BNF_ID"
ColumnType="$none$"
Expression="PL_BNF_ID"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="ObjectVersionNumber"
IsQueriable="false"
IsPersistent="false"
Precision="9"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="OBJECT_VERSION_NUMBER"
ColumnType="$none$"
Expression="OBJECT_VERSION_NUMBER"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="EffectiveStartDate"
IsQueriable="false"
IsPersistent="false"
Type="oracle.jbo.domain.Date"
AliasName="EFFECTIVE_START_DATE"
ColumnType="$none$"
Expression="EFFECTIVE_START_DATE"
SQLType="DATE" >
</ViewAttribute>
<ViewAttribute
Name="ContactType"
IsQueriable="false"
IsPersistent="false"
IsNotNull="true"
Precision="30"
Type="java.lang.String"
AliasName="CONTACT_TYPE"
ColumnType="$none$"
Expression="CONTACT_TYPE"
SQLType="VARCHAR" >
<DesignTime>
<Attr Name="_DisplaySize" Value="30" />
</DesignTime>
</ViewAttribute>
<ViewAttribute
Name="BeneficiaryFullName"
IsQueriable="false"
IsPersistent="false"
Precision="240"
Type="java.lang.String"
AliasName="BENEFICIARY_FULL_NAME"
ColumnType="$none$"
Expression="BENEFICIARY_FULL_NAME"
SQLType="VARCHAR" >
<DesignTime>
<Attr Name="_DisplaySize" Value="240" />
</DesignTime>
</ViewAttribute>
<ViewAttribute
Name="DbPrimaryPct"
IsQueriable="false"
IsPersistent="false"
Type="oracle.jbo.domain.Number"
AliasName="DB_PRIMARY_PCT"
ColumnType="$none$"
Expression="DB_PRIMARY_PCT"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="DbContingentPct"
IsQueriable="false"
IsPersistent="false"
Type="oracle.jbo.domain.Number"
AliasName="DB_CONTINGENT_PCT"
ColumnType="$none$"
Expression="DB_CONTINGENT_PCT"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="Relation"
IsQueriable="false"
IsPersistent="false"
Type="java.lang.String"
AliasName="Relation"
ColumnType="$none$"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="DeleteSwitcher"
IsPersistent="false"
Precision="30"
Type="java.lang.String"
AliasName="DeleteSwitcher"
ColumnType="VARCHAR2"
Expression="DeleteSwitcher"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="PlId"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PlId"
ColumnType="VARCHAR2"
Expression="PlId"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="OiplId"
IsUpdateable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="OiplId"
ColumnType="VARCHAR2"
Expression="OiplId"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="RelExistsFlag"
IsQueriable="false"
IsPersistent="false"
Precision="30"
Type="java.lang.String"
AliasName="REL_EXISTS_FLAG"
ColumnType="VARCHAR2"
Expression="REL_EXISTS_FLAG"
SQLType="VARCHAR" >
</ViewAttribute>
</ViewObject>
Thanks,
Ronaldo

Transfer on last day allowed only in closed fiscal year

Hi Guru,
Client kept asset transfer date as 31/10/2010 first, uploaded some asset on this date, due to some reason asset uploading was not completed for all the asset. so all the asset value which was uploaded on 31/10/2010 was done as zero.
Client took decision to upload all the asset on last day of FY 10-11 i.e 31-03-2011. transfer date was changed as 31-03.2011 and moved up to quality, unfortunatly rquest was not moved to PRD and while uploading to PRD again 25 asset got uploade by transfer date as 31/10/2010, when realized transport req of change transfer date is moved to PRD and abt 50000 asset of total 70000 asset got uploaded.F.Y 2010 was closed while uploading this assets
Year 2010 was again open for posting of cj88 transaction.
When we are uploading balance assets in the system getting error message Transfer on last day allowed only in closed fiscal year
When tried to close FY 2010, system is giving message ' Depreciation not posted completly' for 25 assets.
i tried to do value as zero for these asset through as92 but system agiain giving message Transfer on last day allowed only in closed fiscal year
so situation is we are not able to close FY 2010 and thus assets are not getting uploaded. if we run depreciation for said 25 assets for year 2010 it is not proper because actual transfer date is 31.03.2011
Please Help
Regards,
Shekhar

hi,
go to customizing and under asset data transfer - parameters for data transfer - date specifications - specify transfer date/last closed FY--- you need to place the last day of the period where you have last run depreciation for the legacy system and make sure that I am assuming at this stage will be the previous period or this period.
rgds,
jay

Allow only changes in specific Metadata Group

Similar Messages

Maybe you are looking for