"Allow power button to put the computer to sleep" setting is not available but button does it anyway

This has never happened before. Computer stayed at gray screen with no progress wheel so I held the power button to shut it down. Since startup afterwards the power button sleeps the computer. There's no "allow power button to put the computer to sleep" choice available in Energy Saver but button does it anyway. Is there a defaults command that will fix it? Something else?

I've had Mavericks for a week and a half. I don't believe yesterday could have been the first time I used the power button in an attempt to get the Restart Sleep Cancel Shut Down box, but I've been around long enough to know that memory will fool you.
Yours 'til it doesn't,
llee

Similar Messages

Regarding putting the computer to sleep.

Hey everyone. This is only my second question on Discussions, and I really apologize if the answer to this is dead obvious, but I'm having a minor issue...
I was under the impression that the use of Time Machine would allow you to simply plug in your external, and let Time Machine basically take care of the rest. I haven't actually had a problem there. It works great on backing everything up, but what I'm not sure of, is if I'm using the application properly AFTER it finishes with it's backups. I'm on a new 21.5" iMac, and I'm using a SimpleTech S320U 320gb External Hard Drive. Now, I rarely, RARELY, ever shut my Mac down. Rather, I often put it to sleep. However, if I leave the external plugged into the computer, and put the computer to sleep, once I wake it back up I receive the message that my storage device was not unplugged properly.
This has lead me to manually ejecting my external every time I want to put my iMac to sleep, and I was just wondering if this is normal procedure. Again, apologies if the answer is completely obvious... thanks for any help in advance.

Harmz
Generally it is not a good idea to leave external drives plugged in when putting the PowerBook to sleep as they can prevent the PB from either going into or waking from sleep properly. Personally I think USB devices also have a greater tendency to be problematic than a FireWire equivalent.
I haven't had such problems, but then I always unmount external drives if they are not being used.
Take a look at this Apple document for more info.
2.0GHz MacBook, 15" 1.25GHz/12" 1GHz PBs, 2xPPC Mac minis, 12" iBook G4, Mac OS X (10.4.8) Cube, 2xTAMs, iPod 4G & nano 2G, 1G & 2G iPs, AEBS, AX

Creating keyboard shortcut to put the computer to sleep

I am trying to find out the command to run to put the computer to sleep in the same way as when I press System-->Shutdown-->Suspend in my MATE desktop.
I can send the computer to sleep using systemctl suspend and resume with no problems.
However the behavior is slightly different than pressing the "Suspend" button in that the screen is not locked when I awake the computer from sleep.
What should I write to lock the screen and put the computer to sleep, so that I am asked the password when I resume it?
Thanks a lot in advance for the help,
Cheers,
Luca

Thanks monodromy and allonsy for the answers.
Finally I discovered that the way you lock the screen in MATE is with the command:
mate-screensaver-command -l
I'll try to create a service "lockscreen" as proposed by jason and will post the solution to close the topic!
Thanks for the help guys!

My iTunes v.10.6.3.25 is intermittently refusing to open. Sometimes re-booting my laptop works, sometimes not. I just put the computer to sleep, and when I woke it up, iTunes started automatically. Any thoughts?

My iTunes v.10.6.3.25 is intermittently refusing to open. Sometimes re-booting my laptop works, sometimes not. I just put the computer to sleep, and when I woke it up, iTunes started automatically (I had been trying to open it just before by clicking on a song file in my Documents window, and that's the song that started playing when the pc woke up). I went to my iTunes Help and clicked Updates/download iTunes 10.7 twice, but got nothing. Now, Im wondering if I should downloacd the entire 10.7, or whether that would overwrite all my files, erasing my songs. Anybody know? Thanks.

Hey thanks for replying.
Here's what I did:
First I tried the Winsock reset in the Command prompt. Nothing changed.
Next, I tried the instructions on http://http://support.apple.com/kb/TS4123. The only other program that came up on the 'Winsock Providers' tab on the program was 2 Windows Live applications, which I can do without. So I deleted all Windows Live Applications.
I did the Winsock reset in the Command Prompt again and rebooted my comp.
Unfortunately, nothing has changed. iTunes keeps freezing at various stages of the sync, then shows the candy cane-striped bar with either the words 'Finishing sync' or 'Cancelling sync', before showing the Apple logo.
Sometimes, iTunes gets to the syncing stage - "Copying # of ####" - where it will trudge through the first, second and third tracks before flashing "Copying 4 of ####" for a split second and I catch "Cancelling sync" briefly before the Apple logo appears.
Again, I've repeated the steps I mentioned in my previous post. Does ANYONE know when the new version of iTunes is set to be released?! This one is driving me INSANE, to say the least!!

How Put the computer to sleep with a "F key?

Hi,
How do you Put the computer to sleep with a "F key?
I do remember seeing a version of osX where there was a (say) "F2" key next to the Apple>Sleep pull down menu.
with 10.2.8 or 10.3.9 is there a way to set up a "F" key instead of using the pull down menu?
I looked into the system preferences> keyboard & mouse but no luck. The sys Pref> keyboard & mouse is different on 10.2.8 that on 10.3.9.
An neither one has an option to use an F key to put to sleep.
help!
Michel

Not an F key command, but here's a keyboard command.
http://www.apple.com/pro/tips/quicksleep.html
 Cheers, Tom

HT1449 I moved my itunes library to the time capsule. Everytime I put the computer to sleep, I have to change the location back to the time capsule. I cannot get the iTunes library to stay located in the time capsule.

My itunes library does not stay in its new location in the time capsule. Every time I put the computer to sleep or leave it alone for awhile, the itunes location goes back to the original location in the macbook. Then I have to change the location back to the time capsule and wait for it to reorganize all the files again. So the question is how to keep my itunes in its new location the time capsule?

Welcome to the discussion area!
+Can someone please provide a definite answer, or at least warn against using the TC as a shared media device on a network. The whole point of getting such a device is to be able to offload large multimedia libraries from the laptops, yet access a shared library when networked. N'est ce pas?+
We're all users here...not pros...so you'll get few definitive answers on a forum with varying opinions about almost every subject.
My opinion would be this: Apple designed the Time Capsule for Time Machine to automatically backup all the files on your Mac and other Macs in the household on a regular basis and provide a way to retrieve a file that had been deleted recently by mistake. It's a pretty good router as well.
If you check the info about the Time Capsule on Apple's site, the main features mentioned are backup of your Macs and a dual band wireless network capability.
The Time Capsule was never designed to be a media server housing audio, video and other multi-media files and has never been promoted as such. Nevertheless, some users seem to have adopted the stance that this should be one of the benefits of the device, if not a main feature.
There may be a need for media server type device, but the Time Capsule, at least at this time, is not the answer. If you feel otherwise, you might want to speak directly to Apple and let them know via Time Capsule Feedback.

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Can't put the computer into sleep if VPN is connected

I think I have found a win7 bug. The problem is that I can't put my computer into sleep if VPN is connected. The VPN client I used is Microsoft VPN client. The VPN works fine. But if I click sleep button with VPN connected, the computer screen turns
black, the fan speeds up, and the signal light tells me the computer is still on, not in sleep mode. When I try to wake up my computer by tapping the enter key, space, or moving the mouse, it just doesn't work at all: the fan speeds faster and faster
and the computer heats up. The only thing I can do now to save my computer from darkness is to hit and hold the power button, powering off the computer. The sleep function works just fine if the VPN is disconnected. I can easily wake my computer up by tapping
the enter key. I don't know whether this problem is only present on my computer or universally present on all win7 computers.
The following is my system info:
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer Microsoft Corporation
System Manufacturer LENOVO
System Model IdeaPad Y460
System Type X86-based PC
Processor Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz, 2534 Mhz, 2 Core(s), 4 Logical Processor(s)

Hi,
Please collect the report for the further troubleshooting. Note:Please do the following steps when VPN is connected.
1. Click Start, type in “cmd”, right click it and choose “Run as administrator”.
2. Type in the following command.
Powercfg –energy
3. Find the report file in the location showed in Command window.
4.
Upload it.
Kim Zhou
TechNet Community Support

Schedule shutdown stops working after putting the computer to sleep

I had trouble scheduling the computer to shut down after upgrading from Mac OS 10.3.9 to Mac OS 10.4.6. I accidentally left my screen closed on my PowerBook G4 after scheduling it to startup. It startup with the scceen closed and in sleep mode. After that it wouldn't shutdown after scheduling to shutdown.
So I read a Post to trash Library/preference/SystemConfiguration/com.apple.Autowake.plist. That worked but now it won't shutdown after being put to sleep even when it is woken.

Yes, just put your computer to sleep whenever you judge it right.
The three nightly maintenance tasks are not important enough to change your habits,
they do not affect OS X performance: only disk space.
And yes, since 10.4.2 they are automatically delayed if your computer was sleeping, but you still have to run them manually
— all three together once a month is fine —
if you sometimes shut down or reboot your computer.
Use this Terminal command
sudo periodic daily weekly monthly
or one of the "cache-cleaners" utilities like Cocktail etc.
HTH
Axl

I get the message 'You are not connected to the internet. Online functionality is not available' But I am connected to the Internet

I get the message'You are not connected to the internet. Online functionality is not available' I am connected so what can I do?

Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset Network Settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- DId the iPod ever successfully connect to the network?
- Does the iPod successfully connect to other networks?
- Do other devices successfully connect with your network?

Why does the battery die before the power monitor puts the computer to sleep?

Used to be that the power monitor would sleep the computer safely, but lately that doesn't work. I imagine this is something to do with ageing of the battery - is there a way I can recalibrate this?
Thanks!

Well, that explains why I thought it wasn't very useful. Let's try this:
Model Information:
Manufacturer:          NewerTech
Device Name:          ASMB013
Pack Lot Code:          1
PCB Lot Code:          21
Firmware Version:          10
Hardware Revision:          001f
Cell Revision:          200
Charge Information:
Charge Remaining (mAh):          4687
Fully Charged:          Yes
Charging:          No
Full Charge Capacity (mAh):          4687
Health Information:
Cycle Count:          218
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          12515

Shortcut for putting the computer to sleep?

Is there such thing cause i can't find it.
I'd like to be able to push a key or a combo
to put my mbp to sleep.
Note that the laptop itself is located a bit away
from where i'm standing at the desk; i'm using
external keyboard, mouse, and monitor.
Thanks_

Try:
Option-Command-Eject or
Option-Command-Power
Either one works like a charm. Just make sure you don't hit the delete key.
The complete list can be found at:
http://docs.info.apple.com/article.html?artnum=75459

I just upgraded to Lion and I have not been able to successfully complete a restart. I go to apple menu, restart. The computer powers down no problem and starts but it does not open the desk top. It remains a grey screen with the spinning icon. Any help?

I have just upgraded to Lion 10.8.2. I have not been able to complete a restart. I go to the apple menu, click on restart.The computer powers down and restarts but never opens the desk top. The screen remain grey and a graphic just spins. I have left this happen for as much as 15 minutes without it openning the desk top. When I power down the computer with the power button and start again with the power button. It starts no problem.

Hi Anythony ...
v10.8..2? Most reccent version of Lion is v10.7.4.
Use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.

Put the computer to sleep 'NEVER' with GPO

I want to set all my workstations NEVER go into sleep mode. By default, I believe Windows 7 set to 30 minutes. I used domain gpo and able to set it at 'specify the system sleep timeout (plugged in)' and set timeout in seconds to 18748800 which turns out
to be over 5000 hours.
Is there anyway to set it to 'NEVER' instead? thanks.
Thang Mo

Hi,
Set the timeout value to 0 for a test.
Regards
Yolanda
TechNet Community Support

Energy Saver - timer on putting the computer to sleep doesn't work anymore

After a major crash on my iMac G5 (iSight), my iMac has stopped to go into sleep mode automatically after a set time. Think it is was a crash after using aperture and connected to a Sony K700i phone. Tried disconnect all the USB device and deleted some configuration files uder "Library\Prefrence\", but still no sign of getting my iMac back to normal, does anyone has any ideas or suggestion to diagnosis the problem or to fix it. Thanks in advance.

Hi Pattop,
Other than gpco gsx excellent suggestion, you can try to reset your SMU...
Also, go into system preferences and make sure your settings are being memorized, sometimes you might find they somehow changed for some unknown reason. I suggest you disable screensaver by setting to 'NEVER', and disable 'Automatically Reduce Brightness...' in Energy Saver > Options... see if it helps.
Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black - Mac OS X (10.4.7) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

"Allow power button to put the computer to sleep" setting is not available but button does it anyway

Similar Messages

Maybe you are looking for