Allow privilleged users to enter into EXEC mode on login not working with public keys

Hi,
I have recently updated one of my Cisco ASA to v9.2(1) and noticed a function to get the perform authorization for exec shell access can do a auto-enable when logging in from ssh.
The problem is that if I use a private/public key authentication with a user it won't do the auto-enable feature. If I login without keys and using my password, it jumps into privilleged exec mode as it should.
Anyone else had this issue?
Config:
aaa authentication ssh console LOCAL
aaa authorization exec LOCAL auto-enable
username user password xxxxxx encrypted privilege 15
username user attributes
ssh authentication publickey 22:af:xxxxxx hashed
Any answer will be highly appreciated.
P.S I'm totally new in this forum.

Would you be able to open a TAC SR and once you do , Email me the SR no and i will look into this issue.
[email protected]
Thanks and Regards,
Vibhor Amrodia

Similar Messages

Final cut pro enters into fastforward mode automatically

hello friends !
i am using g5 having 10.4.5 as os and fcp 5.0.4
the problem i am facing is fcp enters into fastforward mode automatically after specifically 25min. it occurs during capture mode or edit to tape mode.it occurs for all the job or projects.
i have deleted the preferences,fcp is re-installed but in vain.now the only option for me is formatting but i think its some setting related issue.
video card used is decklink with latest driver update.

so can I assume you are using "Capture Now" or otherwise capturing clips greater than 25 mins in length ... and equally that you are laying off sequences greater than 25 mins in length?
this is certainly not an inherent problem with FCP. it sounds more like you have a specific hardware issue or software conflict.
on your system, have you tried this with multiple decks/cameras, or is this happening with only one specific one? if you haven't already done so, try to borrow another camera or deck and see if the problem disappears ... if it does then it would seem to be an issue with your camera/deck not playing nicely with your FCP setup.
similarly, do you know anyone else with FCP? you might try to see if the problem can be repeated using your camera/deck on someone elses setup.
aother thing you can test is to create a new user account on your mac, log in to it, open fcp and see if the problem still occurs... that would suggest that you have some software conflict in your normal user account, where some third party software is interfering with the correct operation of FCP (of course this is not exhaustive as it may be something that you have installed which runs as a background process accross all accounts)

I don't want to allow a user to enter a date that is before January 2014

I don't want to allow a user to enter a date that is before January 2014. I want to restrict users from entering a date that is or prior to December 31, 2013 in a date field. Is this possible?

Seems like it is a little more complicated just to create a new Date() object in livecycle...
the way I found to create a new Date() object is using the dateTimeEdit pattern to be 'date{EEEE, MMMM D, YYYY}'
then u can create a new Date
var date1 = new Date(DateTimeField1.editValue);
date1.getTime();
or
you can also click the following link and download the pdf from the blog...
Adobe LiveCycle Designer Cookbooks by BR001: Date handling in Livecycle Designer ES forms
using XFADate object make it easy to manipulate dates with javascript
The XFADate object created by BR001 is very good but to be able to see if a date is prior to another date you can just add this function in the object script..
you can add that function at line 200...
that.isPriorTo = function(date) {
     var toDate = newDate(date);
     if (isNaN(this) || isNaN(toDate)){
          return false;
     } else{
          var interval = this.getTime() - toDate.getTime();
          if (interval > 0){
               return false;
          } else{
               return true;
To use that function above you can just use this code:
if (XFADate.newDate(dateFrom).isPriorTo(DateTo)){
     //dateFrom is prior to dateTo
hope this help

HT201263 my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into rcovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please

my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into recovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please???

By the way, i am using Windows 7 x64 and updated itunes

Please Help....On How to restrict user to enter into KM???

Hi Experts,
when ever user is clicking on a linkI am opening a document from the K.M. Here my problem is if user change the path, he is able to enter into KM... like..
http://myEP:50000/irj/go/km/docs/documents/Links/World%20Time.htm
This is the path to see an HTML page stored in KM. User is able to see the page... But when he changes the path to...
http://myEP:50000/irj/go/km/docs/documents/Links/
he is able to enter into KM into the corrosponding folder. How can I restrict him to enter into KM???
Regards,
Srinivas.

Hi Gopal and S.J,
Thank you both for your replies....
This user is not assigned to Content Admin role....
I have given permissions to the corrosponding folder for only one user (end user)...
As you said(Gopal), I have seen the same case in some other portal site like...
Assign permission for a particular folders to the end user.
Then you will get the below message.
The folder you are looking for has no displayable content.
You can try one of the following:
Access the folder using the Navigation user interface.
Access the folder as a Web folder. Your operating system and browser dictate whether or not this will work.
Even now I am getting the above message but still user can enter into KM....
Regards,
Srinivas.

My iphone 4 currently at ios 7.1.. suddenly my iPhone entered into recovery mode without any reasons.. i tried using iTunes restore the iPhone.. after the process finished... I still stuck at recovery mode. any idea?

currently at ios 7.1.. suddenly my iPhone entered into recovery mode without any reasons.. i tried using iTunes restore the iPhone.. after the process finished... I still stuck at recovery mode. any idea?

i have tried to restore via itunes as i would have usually, half way through i get an error code 3194 pop up.....and yes i do back up.
Thanks for your help but i've already tried this a couple of times.

When I sign into iTunes for updates, a secondary username appears and I need to enter a password. I am not familiar with the second user name. Any Suggestions?

When I sign into iTunes for updates, a secondary username appers and I need to enter a password. I am not familiar with the second username. Any suggestions?

Are you using iTunes on your iPad or the actual program on a Mac/PC?
If you are using on your iPad check the ID being used by going to Settings>iTunes & App Store if the Apple ID displayed isn't yours tap it and select Sign Out then sign in with your own Apple ID.
If you are referring to iTunes on a Mac/PC select the Store Menu and check the Account Name next to the View Account text, if this isn't you select the Sign Out option directly above it then Sign In with the relevant credentials.
Regards,
Steve

Monitor goes into sleep mode and will not wake up

My monitor goes to sleep and will not wake up. I try powering off and that will not respond. I have to unplug the workstation and start back up. I have turn off sleep to never sleep and now it just goes to sleep when Im working.

Hello @rosendahl14,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your monitor goes into sleep mode and will not wake up, and I would be happy to assist you in this matter!
To rule out any sleep mode issues with the monitor, I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try a different cable connecting your monitor to your computer
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
To further diagnose a possible hibernation issue with your desktop, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). I also recommend following the steps below to reset your system's power management settings:
Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command Prompt
Step 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter
reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

My iphone 4 wont turn on. it justr randomnly turned off and i have tried to hold the home and sleep buttons for a minute and also tried to put it into recovery mode but nothing is working?

my iphone 4 wont turn on. it justr randomnly turned off and i have tried to hold the home and sleep buttons for a minute and also tried to put it into recovery mode but nothing is working?

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

Discoverer Viewer/Plus does not work with Custom EUL owned by APPS user

I am facing a unique issue with one of my customers. They have a custom EUL named XX_EUL_US and this does not allow connecting through discoverer viewer or discoverer plus.
I have worked with custom EULS before at other customers and this was never the case. I am being told that this issue is happening as the EUL owner is APPS instead of some other user. Is this the case? Can discoverer viewer not be used with EULs owned by apps user?
Please not that the Default EUL in ICX profiles is set to this EUL and no other EUL profiles are set.
Appreciate any thoughts on this.

Hi,
I am not sure what you mean when you say you have a "custom EUL named XX_EUL_US". The EUL table should be created in a schema named XX_EUL_US. This will then be the EUL owner. You will then need to connect to Discoverer Administrator as the EUL owner and grant privileges to Apps users and/or responsibilities.
The user should then be able to connect to Discoverer Plus/View using their apps username, responsibility and password.
To be able to connect directly from an apps menu you need to have the ICX parameters set correctly. The ICX: Discoverer Default End User Layer Schema Prefix should be set to XX_EUL (without the _US). The ICX: Discoverer End User Layer Language Override should be set to US or not set at all.
Rod West

I re- start my ipad2 into a new one,to update into i0s7, why it is not working of loading?

I re- start my ipad2 into a new one,to update into i0s7, why it is not working of loading? please help!!!

The [c:set|http://java.sun.com/products/jsp/jstl/1.1/docs/tlddocs/index.html] tag is used to set a scoped attribute not request parameter. So when you write
<sql:param value="${param.userid}" />You get null as there is no parameter named userid in the request. Try this
<sql:param value="${userid}" />I would recommend you not to do database connectivity stuff in JSP, JSPs are the view layer of an application and they aren't supposed to be for doing business logic. Also since you are using a random userid, you might end up with multiple users with the same ID and IDs are generally supposed to be unique...

Paid subscription, but all products still in trial mode and does not work!

Hello!
I paid subscription, but all products still in trial mode and does not work! In Adobe ID manage page i don't see my subscription Screenshot “Adobe ID”
I received an email confirmation of my payment subscription. Order number 12984126025, my adobe id
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
Why so?! This is very important! My current project at risk, I can lose money

Please try the below mentioned steps
1) Sign out of the Creative Cloud app
2) delete the opm.db file*
3) update to the latest version of the Creative Cloud app.
*On Windows 7, the opm.db file is located here:
C:\Users\YourUserName\AppData\Local\Adobe\OOBE
*On a Mac, go here:
[Userdir]:Library:Application Support:Adobe
~Deepak

CE7305 - Transparent mode authentication does not work.

Hi,
Im doing a trial content engine 7305 for my customer. Everything worked well so far with the box except with the authentication feature.
Authentication work well on proxy mode but when I turned it on with transparent mode it does not work. My customer is using LDAP for user authentication.
I suspect there is something that I did not turn on in the configuration.
Attached herewith is the show tech of the Cisco 7305 content engine.
Please advise!
Thanks in advance,
Raymond Hew

Hi Zach,
My customer is using Novell LDAP.
Right at the moment the CE is already working with the auth. after rebooted the CE 7305. Just can't explain why but it works after rebooting.
Thanks for your fast respond.
Best regards,
Raymond Hew

I have a 4th gen iPod touch that won't power up! I tried all the traditional stuff. I want to know how to tell if the battery is good. itunes see's the ipod in recovery mode. Tried dfu mode and did not work. Any ideas?

I have a 4th gen iPod touch that won't power up! I tried all the traditional stuff. I want to know how to tell if the battery is good. itunes see's the ipod in recovery mode. Tried dfu mode and did not work. Any ideas? I can hear the PC beep when plugging it in! I suspect a bad battery and trying to charge it ina wall charger made it hot!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free.
Apple Retail Store - Genius Bar

Hello, I have iMac from Oct, 2010 and have OS 10.6.7 and multiple users. Mail icon was accidently removed along with program. Mail 4.4 is on other users but when I reloaded software my user got Mail 4.3. Mail 4.3 did not work with latest OS. Ideas?Matt

Hello, I have iMac Itel i3, from Oct, 2010 and have OS 10.6.7 and multiple users.
About 3-4 days ago the Mail icon in dock had question mark and was accidently removed, along with program on my user. Oops.
1. Mail 4.4 is on other users and works fine, but for me it does not work and tells me V4.3 does not work with latest OS X.
2. I reloaded software from my user with original disks (Oct, 2010) and got Mail 4.3 again. Mail 4.3 did not work with latest OS. I am unable to load Mail. Gives Yellow error message.
" You have Mail version 4.3 (1081/1084). It can’t be used on Mac OS X Version 10.6.7 (Build 10J869). For more information, click the Help button."
3. Tried to update software and look for update for mail 4.3 on Apple site to no success.
Hate to go to MS-Entorage ( I may need to learn something new and alien) mail program since contracts are in Mail/Address Book.
Ideas?
MattDeeds

Matt,
I would download and run the 10.6.7 combo update.
http://support.apple.com/kb/DL1361
Regards,
Captfred

Allow privilleged users to enter into EXEC mode on login not working with public keys

Similar Messages

Maybe you are looking for