Allow the user to control the width of the edit forum post input box

I would like to control the width of of the edit-forum post input box. This could be:
automatically adjust the width of the box so that the box doesn't run off the right edge of the window.
have a user global preference to set the preferred width
at least, allow the user to change the width via the change size icon. The three horizontal bars at the lower left of the input box. You can adjust the vertical dimension, but not the horizontal. TenFourFox 4.0.1. This is probably being blocked for some obscure reason.
Here is an example of an over extended right margin:
Curiously enough, the "software" let's me adjust the width & height of the add reason to edit text, but not adjust the width of the more important edit text box.
Robert

Testing
Standard Reply box can be height adjusted but not width.
Same with Advanced Editor
No Adjustment at all in HTL Editor
Edit.
The Edit uses the Advanced Editor
Only Height Adjustment again.
I do seem to remember someone posting about the width and saying they could drag it over the edge of the right hand edge (Into the grey surround)
This may have been a post in the lounge.
It didn't actually try it at the time but have played with it since and have not seen it.
Maybe it is something they "Fixed" in both senses of the word.
Second edit.
I can't alter the box that currently reads "Message Edited by:- ..."
I also can't get this box to accept New lines (they appear in the box but don't post that way)
Corrected Spelling
9:51 PM Wednesday; May 11, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)
Message was edited by: Ralph Johns (UK)
and new line with a line space as well

Similar Messages

How do I rid the User Account Control - "Do you want the following program to make changes to this computer?" - FireFox Helper pop-up that shows after every log in?

The following pop-up is displayed after every log-in, even after it is clicked yes after previous log-ins. Several students log-in the computers daily. How do I rid THIS?:
User Account Control
"Do you want the following program to make changes to this computer?
Program Name: FireFox Helper
Verified Publisher: Mozilla Corporation
File Origin: Hard Drive on this Computer

In Windows 7, Microsoft updated UAC in several ways. By default, UAC does not prompt when certain programs included with Windows make changes requiring elevated permissions. Other programs still trigger a UAC prompt. The strictness of UAC can be changed to either always prompt, or to never do so.
[http://windows.microsoft.com/eN-US/windows-vista/What-is-User-Account-Control What is User Account Control?]
[http://windows.microsoft.com/en-US/windows-vista/Turn-User-Account-Control-on-or-off Turn User Account Control on or off]
It is the same on win7.
[http://en.wikipedia.org/wiki/User_Account_Control User Account Control]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

What is the user area control type

I am able to find volumes of data on using buttons, text areas, check boxes, etc... But there seems to be no reference any where to the user area control type.

Hi
In the Case 2, scenario i.e. when some one modifies the file, it does show in the source control as pending changes. In case multiple user check out the file, then it show only one user.
Kindly try once again this is one of the basic and essential functionality of version control and TFS does support this.
Cheers, Senthilraj

Adobe acrobat won't install - I don't get the user account control prompt

I have a one year subscription to adobe acrobat XI. My laptop crashed (motherboard issues), so I am now trying to download acrobat to my new laptop. Is this allowed? My subscription has another 6 months on it.
I've signed into my adobe account, downloaded the installer, but after clicking "Run" nothing happens. I don't get the "User Account Control" prompt.
Can someone please help?
Thanks

Hey Goingup2,
Please note that you can activate Acrobat subscription on maximum two computers using your Adobe ID credentials.
In order to install and activate Acrobat on the second machine, you must first deactivate it on the first machine using the Help menu.
You might get User Account Control prompt after selecting 'Privilege Level' option under Compatibility tab of Acrobat properties.
Please check for the same and let me know.
Regards,
Anubha

HT2688 Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function. Can you then connect an iPod touch and copy music from a shared librar

Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function. Can you then connect an iPod touch and copy music from a shared library?

Was your wife logged into the libray at the time you tried to log in? I have had a similar problem and it was because another user was logged into the library when I attempted to. I got the permission denied banner.

I would like to know why I have to go through the User Account Control every time I try to open a document

Actually the question speaks for itself.every time I try to do something I get the User Account Control asking permission to open the filewith Adobe Acrobat. I'm logged in as an administrator so it shouldn't be a problem

Hey dennisl37605729,
Could you please let me know what version of Acrobat and OS are you using.
There might be a chance that you do not have access to specific folders on your system. So try this:
Right-click on the Acrobat icon and choose 'Run as administrator' option from the context menu.
Let me know if this helps.
Regards,
Anubha

Everytime I open firefox the user account control of Windows7 comes and asks if I agree that Firefox changes something in my computer.

I had problems accessing the personal server of our progammer.
He recommended me to try his url in privacy mode of firefox.That did not work either. But since then I get a message from the user account control in Windows7 asking me whether firefox can change a program in my computer. I answer yes and the message disappears. But the message keeps coming everytime I enter firefox. I also happens when I have changed back to non-privacy mode. It also keeps happening when I change the user account settings to not remembering anything

I just had that problem today and although it unfortunately probably won't help you minus47, (as you said disabling your Add-ons didn't help) I tracked my problem down to 'Fierr' as the culprit and disabling it fixed it.
To be honest I don't know why as 'Fierr' hasn't been updated since January '11 and Firefox only started playing up today.
The only other thing I updated today was Flash Player but I'm not sure if I installed it before it started playing up though.
Hopefully this might help someone else.

How to force the File Path Control Browser button to the RT Target instead of the host machine?

I am building an application on a RT PXI system, and for one of the functions I would like the user to be able to use the browser button of the File Path Control to choose a directory on the PXI. However the browser button seems to only want open a file on the host PC, even though the application is fully deployed on the target. Note that I am controlling the PXI from a host PC.
If anyone has any suggestions that would be great. Thanks.

Hi,
Unfortunately, there is not a VI to do this. Are you browsing to these files from your host VI? In order to access the files on your PXI RT target, you'll need to FTP in and browse to them that way. You could programmatically do this, but there is not a simple VI to do so.
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

TNS-01190: The user is not authorized to execute the requested listener com

Hello All,
I just re-installed oracle forms10g and oracle 10g rel 2 on windows vista. The first time i installed both software, i swithched d pc off without turning off the listener on my laptop. When i rebooted, i found that i could not startup both forms 10g and oracle 10g database let alone loggin in. So i re-installed both prodcts. Every time i try to turn off the listener i get the error TNS-01190: The user is not authorized to execute the requested listener com. I have tried several ways to turn this off, but all effort has failed. After reading several literature on this issue, I learnt that if you change the password then any user who knows the password should be able to turn off the listener. But I still get thesame error on trying to add a password. Please can anyone help me by telling me how i can deduce the oracle user that has the administrative right to perform this task.
Pls forgive me for the long text. Thanks again. Pls note I am not an expert so pls be explicit in your explanations.
cheers
aj

Many thanks for your reply. It did not allow me to set up the password. It came back with thesame error TNS-01190 The user is not authorized to execute the requested listener command.
I used the change_password command in lsnrctl from Dos. Note that I have created several users eg Oracle, on windows and gave it the Administrator privilege. But still it will not let me stop the listener or create a password for it. Hope anyone has experienced this before? Due to this my system has been on for the past 24hrs, approximately. Many thanks.
Cheers
Aj

Custom SharePoint 2010 designer page throws "The data source control failed to execute the insert command" exception while adding the new item after the August 13, 2013 CU has installed

We have the SharePoint Server 2010 with SP1 environment on which the custom SP2010 designer pages were working as expected before the
August 13, 2013 CU has installed. But, getting the below exception while trying to add the new item after the CU has installed.
Error while executing web part: System.NullReferenceException: Object reference not set to an instance of an object.     at Microsoft.SharePoint.WebControls.SPDataSourceView.ExecuteInsert(IDictionary values)     at
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65 w3wp.exe (0x1240)                       0x1300 SharePoint Foundation
Runtime                       tkau Unexpected Microsoft.SharePoint.WebPartPages.DataFormWebPartException: The data source control
failed to execute the insert command. 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc    at Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex)     at System.Web.UI.DataSourceView.Insert(IDictionary
values, DataSourceViewOperationCallback callback)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit()     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e)
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean
inclu... 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65* w3wp.exe (0x1240)                       0x1300 SharePoint Foundation
Runtime                       tkau Unexpected ...deStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
I have tried changing the "DataSourceMode" as below, now the insert command is working, but update command is not working.
<SharePoint:SPDataSource runat="server" DataSourceMode="ListItem" />
Also, the lookup dropdown fields are displaying the value as "<a href="Daughterhttp://cpsp10/sites/Employees/_layouts/listform.aspx?PageType=4&ListId={8F62F444-FB6A-4F03-9522-C4696B45DCD1}&ID=10&RootFolder=*">Daughter</a>"
instead of only "Daughter".
Please provide the solution to get rid of this issue.
Thanks
Ramasubbu

Try below:
http://social.technet.microsoft.com/Forums/en-US/ae910269-3a0c-4506-844b-e8bc89d95b71/data-source-control-failed-to-execute-the-insert-command
http://blog.jussipalo.com/2012/01/sharepoint-2010-data-source-control.html
While there can be many causes for this generic error message, in my case the first parameter or ddwrt:DataBind function inside the SharePoint:FormFields element was
'i' and I was working with an Edit Form. Changing it to
'u' as it was with every other FormField fixed the issue.
<SharePoint:FormField runat="server" id="ff1{$Pos}" ControlMode="Edit" FieldName="Esittaja" __designer:bind="{ddwrt:DataBind('u',concat('ff1',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Esittaja')}"
/>
Explanation:
DataBind operation type parameters (the first parameter) are listed below:
'i' stands for INSERT,
'u' stands for UPDATE,
'd' stands for DELETE.
http://webcache.googleusercontent.com/search?q=cache:d9HHY4I7omgJ:thearkfloats.blogspot.com/2014/03/sharepoint-2010-data-source-control.html+&cd=4&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions a

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions are for the computer to read. Both formats are, of course, readily recognized and indexed by Spotlight. Journal articles have two essential components with regards to a database: the topical content of the article itself, and the cited references to other scientific literature. While a PDF merely lists these references, the HTML version has, in addition, links to the cited items. Each link URL contains the digital object identifier (doi) for the item it points to. A doi is a unique string that points to one and only one object, and can be quite useful if rendered in a manner that enables indexing by Spotlight. Embedded URL's are, of course, ignored by Spotlight. As a result, HTML-formatted articles must be processed so that URL's are openly displayed as readable text before Spotlight will recognize them. Conversion to DOC format using MS Word, followed by conversion to RTF using Text Edit accomplishes this, but is quite labor intensive.
In the last few months, I have added about 3,500 articles to this collection, which means that any procedure for rendering URL's must be automated and able to process large batches of documents with minimal user oversight. This procedure needs to generate a separate file for each HTML document processed. Trials using Automator's "Get Specified Finder Items" and "Get Selected Finder Items", as well as "Ask For Finder Items" (along with "Get URLs From Web Pages") give unsatisfactory results. When provided with multiple input documents, these three commands generate output in which the URLs from multiple input items are merged into a single block, which yields a single file using "Create New Word Document" as the subsequent step. A one-to-one, input file to output file result can be obtained by processing one file at a time, but this requires manual selection of each item and one-at-a-time processing. What I need is a command that accepts multiple input documents, but processes them one at a time, generating a separate output for each file processed. Is there a way for Automator to do this?

Hi,
With the project all done, i'm preparing for the presentation. Managed to get my hands on a HD beamer for the night (Epason TW2000) and planning to do the presentation in HD.
That of course managed to bring up some problems. I posted a thread which i'll repost here . Sorry for the repost, i normally do not intend to do this, but since this thread is actually about the same thing, i'd like to ask the same question to you. The end version is in AfterEffects, but that actually doesn't alter the question. It's about export:
"I want to export my AE project of approx 30 min containing several HD files to a Blu Ray disc. The end goal is to project the video in HD quality using the Epson EMP-TW2000 projector. This projector is HD compatible.
To project the video I need to connect the beamer to a computer capable of playing a heavy HD file (1), OR burn the project to a BRD (2) and play it using a BRplayer.
I prefer option 2, so my question is: which would be the preferred export preset?
Project specs:
                    - 1920x1080 sq pix (16:9)
                    - 25 fps
                    - my imported video files (Prem.Pro sequences) are also 25 fps and are Progressive (!)
To export to a BRD compatible format, do i not encounter a big problem: my projectfiles are 25 fps and progressive, and I believe that the only Bluray preset dispaying 1920x1080 with 25 fps requests an INTERLACED video (I viewed the presets found on this forum, this thread)... There is also a Progr. format, BUT then you need 30 fps (29,...).
So, is there one dimension that can be changed without changing the content of the video, and if yes which one (either the interlacing or the fps).
I'm not very familiar with the whole Blu-ray thing, I hope that someone can help me out."
Please give it a look.
Thanks,
Jef

For multiple users on a computer, will Firefox Sync synchronize all the users on a computer or only the one logged on?

For multiple users on a computer, will Firefox Sync synchronize all the users on a computer or only the one logged on? For instance my spouse and I will share a laptop and I want to sync my Firefox when I log on there also but do not want to sync her data.

Curt
how do you know if your using the
Central cache all distributed cache ?
and are they both stored in the same place ?

How to force the user to enter a value in the prompt

Is there a way to force the user to enter a value in the prompt before they run the report?
We have a customer specific dashbaord. The user has to enter a customer number in Dashbaord prompt on a first page of the dashboard. We store that value in a presentation variable. That presenatation variable value is being referenced in all the other pages of the dashabord. If the user does not enter a values in the first page and directly navigates to the other pages on the dashbaord, the reports on the other pages start to run for all the customers. Is there a way to force the customer to enter a value in the prompt before running any of the reports on the dashboard?
Thanks!

by Answer prompts, do you mean Column prompt?
I can not use Column prompt in this senario as the user should not have to enter the same customer number over and over again when he navigates from one page to another on the same dashboards. If there is a way to default the column prompts then this would be an acceptable solution.
I have already defaulted the prompt to a value as suggested in hte blog, but the issues occurs when the user erases the defaulted value. Is there are way to set the default value within the report?
Can you please explaing mroe about option 3 regarding Java Script. Also please let me know what other options there are so that I can check whether they will fit my needs.
Thank you very much!

Scripts for changing the address of the user when they have been in the box for 6 months

Scripts for changing the address of the user when they have been in the box for 6 months
If users are in a folder for deactivated users and disabled users in Active Directory, and been there for 6 moths do: change email address in exchange to existing email address.old
Anyone have suggestions on how I can go about it?

What is this "box"? What is this "folder" you're asking about? You'll likely get a better answer if you use standard terminology.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

I know the user name and password but forgot the secret question

I know the user name and password but forgot the secret question

Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.@

Allow the user to control the width of the edit forum post input box

Similar Messages

Maybe you are looking for