Alltel Palm 700WX Issues Help...

I have a treo 700wx... (I wish I didn't), I have had it a year and a half, cannot use bluetooth at all, tried at least 6 different bluetooth headsets, and to top it off the **bleep** phone's alarms go off whenever they want to., At least an hour before they are suppose to.
How is it possible that Palm has kept this phone on the market this long without a class action lawsuit. False Advertising, or just selling a piece of crap?
Please discontinue this phone so I can get something that works with my insurance..
Post relates to: Treo 700wx (Alltel)

With the alarms going off when they want to that means there is some type of corruption on the device and it will need to be hard reset. If you go here this well tell you how to do the hard reset. http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
Once this is done check the Bluetooth with a compatible headset from here http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=39570.
Post relates to: Palm Z22

Similar Messages

Palm 680 Issues HELP!

My phone powers on normally everything works great! once the backlight times out I cannot wake the phone back up! None of the keys work after the initial screen timeout! I can recieve calls fine, but I cannot make any phone calls due to not being able to use any of the functions or buttons!
I tried to reset the phone but it just wont reset!! HELP ME PLEASE!
Post relates to: Treo 680 (AT&T)

Try a 10 second soft reset by taking out the battery for at least 10 seconds. This allows the device to power off completely, like a shutdown on a PC.
If that reset doesn't fix the issue you will need to try a hard reset that will put the Treo back to the factory condition. The hard reset will erase all data on the Treo.
Click on the following link to the kb.palm.com webpage for the article regarding reset procedures.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
Are you sync'ing the device to the same username in Palm Desktop as an older device?
If you are, this will cause problems on the new device. When you sync the device, it saves the device settings, 3rd party apps, preferences, etc. in the backup folder in the username folder on the PC. When you sync the new device it copies the contents of the backup folder for the old device to the new device. This will cause corruption in the settings for the new device thus causing erratic behavior of the new device.
You may need to hard reset your device and rename your backup folder. Go to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the directions to do a hard reset. Next before you hotsync your data back over you will need to rename your backup folder, to do that go here;
XP
C:\program files\palm or palm one\[hotsync username]\ and rename your backup
folder to backup.old
Vista
Start-->documents\Palm OS Desktop\[hotsync username]\ and rename your backup
folder to backup.old
Then hotsync to your current hotsync name and all your contacts, calendar,
tasks, and memos will come back over.
Show file extensions for XP or Vista
XP
If you can not view file extensions on your PC I would like you to open a
folder go to Tools-->Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
Vista
Open control Panel go to Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/treo/treo680att/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

Max Expansion card size for treo palm 700wx

I can't seem to find the max expansion card size for a treo palm 700wx. I purchased a 4gb Scan Disk which should be compatible with most ever device so expect that the hardware dosen't support up to 4gb. If anyone has futher information on this I would appriciate it.
Post relates to: Treo 700wx (Verizon)

that I have used with no problem is a Transcend 150X Secure Digital Card 4GB. My pictures and tunes along with backups reside on it. Had it for a year. In use 2200.03MB with 1718.30MB free currently.
Post relates to: Treo 700wx (Verizon)

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

You're probably running into the servers simply being swamped. Thousands of people are all going for the software update at the same time. Give it a try again and if that doesn't work, then try plugging it into your computer and trying it that way.
I didn't get a notion of the size, it doesn't seem to be as big as the 700 meg 5.0 update, but it did take me 20+ minutes to download via cable internet so it's a large file. That in and of itself takes a while.
If you're trying to download it directly to your iPhone, you'll need to be on wifi since I'm sure it's well over the 20 meg file size limit for 3G.

Palm Rejection Issue on s10-3t?

Hi all,
I'm new to here b/c I am interested in an s10-3t. The only thing that's bothering me now is the palm rejection issue.
It is a multitouch screen, and didn't come with any stylus. If I use it for inking/writing only, I need to keep my hands up in the air...that's annoying...
Is there a proper solution to this? I saw the posts about using different stylus but they don't seem to address the palm protection issue...
Thanks!

I have the same issue. A long crack across the touch panel and not the lcd beneath it. I asked the greek lenovo tech support if it is possible to replace the touch panel and am waiting for their answer and a quote for a price. I will post their answer here.

Recently i upgrade my iPad2 to 7.1(11D167) and now the wifi connection is very weak, I am not sure if it is a hardware or software issue, help please!

Recently i upgrade my iPad2 to 7.1(11D167) and now the wifi connection is very weak, I am not sure if it is a hardware or software issue, help please!

I am not sure, I have full signal on my iphone 5 and just 1 dot on my ipad, tomorrow I will test connection with other router and network, I thank you for your help and I will tell you the test result when done

Palm login issue on my HP Pre 3

I've a Palm login issue on my HP Pre 3 after a reset via the "lost device" function (because of a software problem) and now the device is locked. Is there a way to unlock it?
I've tried to re-flash the device (through WebOS Doctor), change the password, change email with no results.

Are you able to log into your webOS account online with a computer?
If you previously selected "I lost my phone", that might block that phone from being used to log back into a webOS account. I don't know that, just speculating.
Anyway, if you log into your webOS account online, are there any devices listed? I've never done the "I lost my phone" thing, so maybe there's an option that says "I found my phone"? Wishful thinking, probably...
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

New palm 700wx won't appear on computer during HotSync

I received a refurbished Palm Treo 700wx (used to have a Palm Treo 700 Palm-based) phone. The photos from the old Palm transferred to folders on my computer, which uses Windows XP Pro. How can I get the photos from the 700wx to transfer to the computer?
Post relates to: Treo 700wx (Alltel)

Since the 700wx is a Windows Mobile based phone, you don't use Palm HotSync as the way to transfer data. Instead, you use MicroSoft ActiveSync!
Do you have this installed on your computer?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Alltel Palm Treo Pro picture messaging

I have followed the instructions, made sure thru Alltel I still had picture messaging and still can't send a picture message. It seems as if it is being sent properly- when it arrives the screen is only white with my signature on the bottom. After sending it also seems to lock up my Today screen if I attempt to see messages. The picture sent is one taken with the phone- it goes out under 300k, and with the white screen it shows up as a 1k; but if you go to the sent file it show up still at 300k. The phone is new- so there is no memory issues Any help would really be appreciated
Post relates to: Treo Pro T850 (Alltel)

My wife has this exact phone and has the exact same problem, did anyone ever solve this. We have alltel. THis is rediculous, a brand new phone and all over advertises that you can picture video and text message with it but of course as usual it is lies. Just like all the other BS alltel has pulled on me. I digress. Palm Pro has newest arcsoft on it and video messages do receive as well as pictures sent though email account using the phone but a real picture message mms just shows up white screen with sig at bottom. When looked at with file explorer on my htc and on my other palm the "attachment" is only 1k and is named temp. WTF is going on here does anyone know?

Second Palm TX issue, can't find cust service.

Good afternoon, Unfortunately this is my second TX digitizer issue. I am having huge problems trying to contact customer service for assistance. Either the phone number is not in service or I get the run around. When I email the company, I get no response (Actual email below). Its going on about 2 months now and I am quite frustrated and I have been using palm products for about 10 years and I am loyal. Any help would be greatly appreciated. Thanks in advance.
EMAIL MESSAGE SENT
Dear Sir or Ma'am,
Good afternoon, I have some problems with my Palm TX handheld and had an extremely hard time finding a phone/contact number for the PDA assistance, I hope you can help me. I have a Palm TX S/NN70UXP3M0RX Mac:000B6C4020011 with the following issues.
Digitized drift – I have purchased and installed “Power Digi” and it helps a bit but I find myself having to re-digitize the touchscreen quite often.
Screen area not recognized – The upper left hand corner of the screen is not recognized most of the time when a stylus is used in that area
Upon performing a hard reset, it is extremely difficult to digitize the device on the initial digitize screen. It generally takes about 45 minutes or longer to digitize after a hard reset due to the fact the upper left hand portion of the screen is not recognized.
All of the above issues are progressively getting worse.
This is my 2nd Palm TX with this problem. I contacted customer service(my first TX), verified that it was in warranty. There were problems communicating/understanding the operator but we got through it and I was told to await a confirmation # that would be sent to me and that I could not sent the unit in until I received the #. I waited several weeks however and received nothing from palm. I started the process again, became frustrated, and eventually purchased another Palm TX (this one). I love the Palm pdas, the pdas are great for work etc. This time however going out and buying another one is not an option (I don't make a lot of money).
I sincerely appreciate your assistance in this matter. My contact information is below, feel free to contact me.
Thanks in advance for your help!
Post relates to: Palm TX
Post relates to: Palm TX

Have you tried calling this number:
Palm phone support fee is $14.95 US. Fee is waived if you’re within
90 days of purchase, or if your issue results in a repair order being
created.
U.S. Support (English):
Phone: 866-935-7256
Hours: Mon-Fri 6am-8pm PST, Sat-Sun 8am-5pm PST
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Router & Outlook Express Issues - help!

I'm losing my mind and pulling out my hair. I have a Dell desktop and recently purchased a Linksys WRT54G (version 5) router and a brand-spanking new Dell wireless notebook (Inspiron E1505).
After installing the router on my desktop - we noticed some server issues with our email system (Outlook Express). I'm not having connectivitity issues as we can connect to Internet Explorer fine. BUT, when I go to Send/Receive in Outlook express to send/receive emails it is 'acting quirky'. This is on both desktop and notebook computers but more on the new notebook. It inconsistently pulls mail. Sometimes it works great and sometimes it has a server time out and just hangs on. Mostly getting that 'PoP3 servers is not responding. Would you like to wait for 60 seconds'. If I shut down Outlook and retry, sometimes it pulls/sends mail - sometimes not. I've been on the phone with my DSL provider (Alltel, now Windstream) and Linksys. Additionally the modem we're using is speedstream.
Suppposedly there is a conflict with the version 5 model of Linksys routers and Outlook Express. I heard this through my DSL provider - Linksys didn't really own up to this 'conflict'. I've done tons of troubleshooting with Linksys tech (opened Outlook Express ports, updated firmware, adjusted MTU...) Nothing working. Email will work 'ok' for an hour but then back to quirkyness...not pulling email great. Not 'connecting to server great'. When I click SEND in Outlook it just keeps saying 'connecting to pop.windstream.net and then a pop up window saying "Your POP3 server has not responded in 60 seconds....would you like to stop/wait'.
I'm considering returning my router and getting another brand but don't want to jump the gun until I'm 120% sure that it's a conflict with the new Linksys router and Outlook Express and I cannot do anything to fix it. My next door neighbor is in the SAME boat. Same router, same DSL provider, new wireless notebook -same Outlook Express mail issues. Thank you for any thoughts you might have - again, I've done extensive trouble shooting with my DSL provider and Linksys - to no avail. .....
Cindi
[email protected] - this is email on my notebook
[email protected] - this is email on my desktop

This worked for myself...(Thanks Isy B)
* Go back to the router's 'Setup' page (192.168.1.1). and to the 'Advanced' tab
* Click on the 'Forwarding' tab
* Under the 'Customized Application' type: Outlook 3 times.
* Then on 'Ext. Port', type: 25 to 25, 110 to 110 and 113 to 113.
* Put a check in 'Protocol TCP' and one in 'Enable' at the end
* Click Apply button at the bottom of page
Now in Outlook Express (may be different if using outlook)
* Tools and then Accounts - a window will open, make sure you are on the mail tab
* Highlight mail account and hit Properties
* Goto the Advance tab
* Verify Outgoing mail (SMTP) = 25 &Incoming mail (POP3) = 110
* Make sure nothing else is checked
* Hit o.k.
This worked for myself, hope it's helpful for some others as well...

Palm 680 Issue - "Connecting with the deskop using Cradle" msg

I have a curious problem with my 680 Smartphone. When not connected to the cable it is continously and spontaneously attempting to connect with the desktop. Is this some sort of HW short or malfunction? The phone is unusable. Everytime I clear the msg it goes back into synch mode.
Even stranger, if I connect the cable from my PC to the phone, it will become usable again. I can clear it out of synch mode and use all the features of the phone.
Has anyone ever experienced this? I have done all the suggested troubleshooting on the support site.
Post relates to: Treo 680 (AT&T)

Hello GlennPalm1000, Welcome to the Palm Support Community.
This issue seems to appear when the bottom Hotsync connector gets wet or otherwise contaminated. You might try cleaning it with isopropyl alcohol or contact cleaner from an electronics store.
Any chance the phone got wet?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Presenter Pro Issues - HELP !!

Hi all
I recently purchased the Elearning suite 2.0 (and am in the process of requesting an upgrade as it was 3 days prior to 2.5's release - bummer I know !!)
and I have had HUGE problems with Presenter Pro
aside from it not installing properly etc a problem that has been sort of over come - I have had MAJOR problems with adding Audio through the presenter tab - basically it will not let me do it !!!! it completely freezes ppt with a 'not responding' dialog and then shuts down powerpoint - I have this problem with Video also -
I have found I published a package and the video won't work - half the animations don't work and its not going very well at all !!!!
so
Can anyone tell me how to trouble shoot my Audio - video issue first and foremost PLEASE - have found the adobe support line to be VERY unsupportive (I was left on hold for 49 minutes one time before I even spoke to a person who ended up palming me off to 4 others who all did not solve my problem !!!)

I'm experiencing the same problem, in addition to "codec failed" messages and other crashes. This is extremely frustrating and causing many hours (now days) of lost work.
I'm using the following.
1. The Windows version--Windows 7.
2. The PowerPoint version-Powerpoint 2010
3. the version of Presenter (Adobe Presenter > Help > About Adobe Presenter)
4. if the version is not 7.0.6, please update from the Help > Updates menu and ensure the patches have been installed; upon updation, the version should be 7.0.6 build 7604.--I'm using 7.0.6. build 7604
5. What kind of audio are you trying to add (mp3 or wav)?--I'm using whatever is built-in to the Presenter software (I presume it's mp3).
6. What kind of video are you trying to add (mpg, flv, mp4, wmv etc)?--Here too, I'm currently using whatever is built-in to the Presenter software.

Palm pre issues

i ordered a new palm pre cause mine was cracked and the apps wasnt available now ive got the new phone installed the update but am having trouble connecting to carriers like at&t i can send one message they recieve it but i can see the reply message and cant send any future messages me i love the pre its a very good phone
[email protected]
chris

missmary wrote:
The only solution I found was to go into Device info, reset options and then choose erase apps and data. Unfortunately, the problem may reoccur. I guess there is no permanent fix yet. Good luck!
Curious here missmary: Do you live in Brazil too? Or another country where the webOS App Catalog may not be supported?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Palm VIIx needs help!

My Palm VIIx is acting up and I could use some help! The start-up page is flashing rapidly on the display and I cannot get to the address book, note pad, calendar, etc. When I attempt to turn it off I get a message that says (Erase all data? YES - "up" button NO - any other button." I have tried the reset button on the back but it's done nothing. I do not wish to lose all the data stored but I can no longer sync and back-up to a PC. Any suggestions?
LeeOrange

Unless you have the information saved on your computer (you have been Hotsyncing regularly as recommended by Palm, correct?) then it is gone. The memory structure of your device is Volatile RAM. It needs electricity to retain the information. When gone, you are left with nothing but zeros...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Alltel Palm 700WX Issues Help...

Similar Messages

Maybe you are looking for