Almost all clients status as Inactive

In one of our secondary server , almost all clients status showing as Inactive. Why its showing as Inactive or how to troubleshoot to check on this

Have you already examined if the MP on the secondary site and that replication are still working?
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

SCCM 2012 Clients at Secondary Site don't update and shows status as INACTIVE

I have 1 Primary site and 1 Secondary sites. I have setup Secondary site Boundaries using IP subnet. I see that the systems from secondary
site show in the console and they all have clients installed but however 60% of the system shows client activity as INACTIVE and not receiving any heartbeat DDR none of the system showing hardware inventory. I am not positive
where to look as far as logs are concerned. I think the clients aren't receiving policy like they should.
Just to give a brief idea, Secondary Site server crashed and we had to rebuild the server and re install secondary site after rebuilding all the
problem. Everything is working fine in Primary site.
Secondary site is communicating with primary site MP and DP
I have checked MPcontrol.log it shows status as OK
I am able to install client through console but yes when I check the configuration manager properties it shows CCM Notification Agent as DISSABLED
and in the Action Tab Machine and User policy are the only cycles showing.
Checked replmgr.log and rclctrl.log but it’s not showing any error
Only log file which shows error is bgdserver.log ( pasting log errors )
ERROR: SQL exception when retrieve client certificate from DB. Exception: The EXECUTE permission was denied on the object 'sp_GetPublicKeyForSMSID', database 'CM_PRI',
schema 'dbo'. -2146232060           SMS_NOTIFICATION_SERVER     05-07-2014 12:09:01               3968 (0x0F80)
ERROR: Can't do post authentication without client certificate stored in regsitration.            SMS_NOTIFICATION_SERVER
05-07-2014 12:09:01                3968 (0x0F80)
ERROR: Failed to authenticate with client [::ffff:10.5.55.88]:49623.        SMS_NOTIFICATION_SERVER     05-07-2014
12:09:01               3968 (0x0F80)
ERROR: SQL exception when retrieve client certificate from DB. Exception: The EXECUTE permission was denied on the object 'sp_GetPublicKeyForSMSID', database 'CM_PRI',
schema 'dbo'. -2146232060           SMS_NOTIFICATION_SERVER     05-07-2014 12:09:01               3968 (0x0F80)
ERROR: Can't do post authentication without client certificate stored in regsitration.            SMS_NOTIFICATION_SERVER
05-07-2014 12:09:01                3968 (0x0F80)
ERROR: Failed to authenticate with client [::ffff:10.5.62.68]:49923.        SMS_NOTIFICATION_SERVER     05-07-2014
12:09:01               3968 (0x0F80)
ERROR: SQL exception when retrieve client certificate from DB. Exception: The EXECUTE permission was denied on the object 'sp_GetPublicKeyForSMSID', database 'CM_PRI',
schema 'dbo'. -2146232060           SMS_NOTIFICATION_SERVER     05-07-2014 12:09:06               3968 (0x0F80)
ERROR: Can't verify signature in message without client certificate for client SCCM GUID:B47059B1-D4E4-41A2-BC88-486A597FE399
SMS_NOTIFICATION_SERVER     05-07-2014 12:09:06               3968 (0x0F80)
ERROR: Invalid hook to be decoded. Authentication                SMS_NOTIFICATION_SERVER
05-07-2014 12:09:06               3968 (0x0F80)
ERROR: Failed to decode message body (<BgbSignInMessage TimeStamp="2014-07-05T06:39:01Z"><ClientType>SCCM</ClientType><ClientVersion>5.00.7804.1000</ClientVersion><ClientID>GUID:B47059B1-D4E4-41A2-BC88-486A597FE399</ClientID></BgbSignInMessage>)
with message header
Help me resolve this issue as I am struggling to resolve this for almost 2 weeks.
Please let me know which logs are helpful and I'll try to add it to replies.

Hi,
Quote:"see that the systems from secondary site show in the console and they all have clients installed but however 60% of the system shows client activity as INACTIVE and not receiving any heartbeat DDR none of the system showing hardware inventory. "
So not all the clients show inactive? Have you checked the logs in an inactive client? Such as ClientIDManagerStartup.log.
Have you checked Secondary Site server's computer name from SQL logins? You could try to remove this account, wait a while, recreate the same computeraccount login with sysadmin access. (http://social.technet.microsoft.com/Forums/en-US/d5383c23-6b71-47cc-9fad-fda82a44a3aa/secondary-site-showing-inactive-clients?forum=configmanagerdeployment)
You could use Configuration Analyzer for System Center 2012 R2 to troubleshoot issues.
http://technet.microsoft.com/en-us/library/dn469435.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Query is running but status shows INACTIVE

Hi All,
I am running one query and is still running but when i checked v$session the status shows INACTIVE since long time..
Can somebody please help me to understand why the status is INACTIVE even if the query is running.. Is my session waiting for some resources?
Also i checked v$session_wait it shows "SQL*Net message from client"
Oracle version 9.2.0.7.0
OS : SunOS 5.10
Module : Sql*Plus
Any help is greatly appreciated.
-Harsh

Thanks much for your reply Mark.
This session i myself running from sqlplus and its still running.
Also here's my session info
select SID, STATUS, program, module, last_call_et from v$session where SID=78;
SID STATUS PROGRAM MODULE LAST_CALL_ET
78 INACTIVE sqlplus.exe SQL*PLUS 0
I checked the locks too there is no blocking or blocked sessions using following.
select /*+ RULE */ a.session_id, s.serial#, s.username, s.status
from dba_locks a, v$session s
where a.blocking_others = 'Blocking'
and a.session_id = s.sid
order by 1;
Now under v$session_wait my session 78 is showing wait as 'db file sequential read'
So is my session now waiting for resources? Can you please help me how to find that my query has enough resources or if not does my session is under wait.
Thanks
-Harsh

SCCM 2012 Clients status Unknow

Hi
We're using SCCM 2012 to send patch to my clients using ADR, but in the monitor for the deployment, shows aroud 35% of equipment in the status unknow: "Client ckeck passed/inactive" and "Client check passed/Active", I took some of the equipments and manually
refreshed all the Action, but this continue showin in unknow state.
Any Idea why all these machines appear like unknow? I refreshed the actions in the client machine and continue with the same status.
Thanks
Doc MX

Hi guys,
I've had a bit of a breakthrough with this. I had 4 servers that were appearing as active/passed. The client installed fine but nothing else was happening. Tried reinstalling the client and deleting the CCM folders but nothing.
On one of the machines Windows Update was also failing and in trying to fix this, I've fixed the SCCM issue and it's received updates and now moved to the In progress tab and one is compliant.
I found this http://support.microsoft.com/kb/971058 and ran the fix it tool on the server. It found some errors and fixed them. Had to run it twice on one server as it fixed an error the second time around. On completion I kicked off the
software update scan cycles on the clients and within a few minutes the console appeared.
As I type, I'm two servers down and awaiting the scans on the other two. Fingers crossed!

Windows Server 2012 Essentials (not R2) - all client computers offline

The server is Windows Server 2012 Essentials (not R2). I have had this problem ever since I first installed the Windows Server 2012 Essentials server in the summer of 2013 (before R2 was released). The Windows Server 2012 Essentials server shows offline
for all Devices under Dashboard. (Allow me to add that I just installed another site with Windows Server 2012 Essentials R2, and it was a breeze - all of the computers at the second install site are online.) I have one Windows 8.1 Pro client and the rest
are Windows 7 Pro clients. The problem occurs on ALL client computers.
I have removed computers from Devices in Dashboard on the server, rebooted the server, changed the client computer to a workgroup, rebooted the client computer, and reinstalled the connector software on the client computer. Same result. I
have tried this on a Windows 7 Pro client and a Windows 8.1 Pro client with the same results.
After running the connector on a client computer and waiting for the server to update its Devices status, if I look under Devices on the server Dashboard, the Windows 8.1 client computer will say online but within 24 hours it goes offline again. The
Windows 7 client computers never show online. Both computers stay offline - they NEVER show an online status (referring to the status under Devices in Dashboard).
I should make it clear that the clients can access the server shares with no problem. File synchronization works great. The clients can ping the server and the server can ping the clients. But client backups on the server fail.
One of the most troublesome things about this problem is that it prevents the client computers from being accessed remotely using the website setup by Anywhere Access. I can login to get remote access to the shared files on the server, but
the only computer that says "online" is the server. All of the other computers are "offline".
The server and clients are only using Windows firewall. The clients all use Microsoft Security Essentials for their anti-virus.
I used a troubleshooting tool that tells me that there are problems with port 6602 on the server, but the clients are all fine with port 6602. I know port 6602 is important for using Anywhere Access but I am still trying to find out more details on that.
I have checked all of the firewall settings related to port 6602 on the server, and the firewall settings look like the standard Windows settings for this port. I used netstat to find the PID associated with the port, and I looked up the PID to find the service.
That all looked standard, too.
I have been working on this problem since the summer of 2013!! Does anyone have ANY suggestions?!!
HELP!

Hi,
Just addition, please check if all necessary Windows updates are installed on those
“Offline” client computer.
When connect client computers to the Windows Server 2012 Essentials server by using the Connector software, there
will be LAUNCHPAD on the client computer. Was this LAUNCHPAD grayed out? Please check if can access Shared Folders via this LAUNCHPAD. Meanwhile, please ping the Windows Server 2012 Essentials via IP address and server name when client computers show as
Offline. Any find?
Get Connected in Windows Server Essentials
In addition, please follow the path on Server and client computer:
%programdata%\Microsoft\Windows Server\Logs. Did you check any relevant Server-side logs and
Client-side Logs if find more clues?
Windows
Server Essentials 2012/2012 R2 Log Files
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Change status(Active/Inactive) of file adapter by the external command

Hi, all.
Is it possible to change status(Active/Inactive) of file adapter by the external command?
Let's say, like
"$ switch_file_adapter_status.sh <File Adapter name> <active|inactive>"
or something like that.
Actually, we have the following requirement for the file adapter.
For example, we have many "file adapter to R/3" scenarios and we only want to allow data transfer between 9:00 a.m. to 9:00 p.m.(R/3 service time).
In order to achieve this requirement, one option would be to switch file adapter status between active and inactive by external command line.
And this command will be controlled by the job scheduler(like Tivoli).
Does XI(3.0 or above) have this kind of feature?
Best Regards.

Hi,
I don't think that this is possible.
But one Solution for your problem could be a job on xi who execute the Queue.
So that Adapter work the hole time and send the Message to XI Queue which process them not automatically.
And the XI Queue you can trigger with a Job like normal R/3 Jobs.
Hope that helps,
Regards,
Robin

ON RWB - CC Monitoring - SOAP Channel. status says "inactive or unregister

Hi,
I am working on SOAP Webservices.
My Scenario is working fine ... But Some How on RWB - CC Monitoring - SOAP Channel. status says "inactive or unregistered".
On the otherside , my SOAP Scenario is working fine...
But why for that status " "inactive or unregistered"." , I dont Know?
Please Suggest, How to Deal with this ........?
I executed transaction code " se38 - > SRT_ADMIN_CHECK report "
It states me almost every thing unregistered/ inactive/ not configured except ICM Services ..
are these services shoud active and registered for SOAP Scenario?
how to activate them .............????????
That CC status " "inactive or unregistered" has anything to do with this SRT_ADMIN_CHECK report????
Regards
Prabhat Sharma.

Hi
This is the problem which i recently faced and solved.
Cause: Saop related J2EE application are stoped or not set to default start as initial state.This is also a reason
             for 503 service unavailable error while soap posting.
Solution : start the J2EE app , com.sap.aii.adapter.soap.app & com.sap.aii.adapter.soap.lib set them as defualt started
               as initial state.
Where : If you are in PI 7.1 , http:<host>:<port>/nwa->Operations Management -> Systems -> Start & Stop -> Java EE
               Applications.
                Refer http://wiki.sdn.sap.com/wiki/display/XI/start_stop_applications for more help.
               Also in Start button , there will be a dropdown where you can set the default initial state as started.Simply starting may
               cause similar problem ( not registered ????????) again ,so better to set initial as started state.
Regards,
$rinivas

Collection Alerting for Endpoint Protection and Client Status

both for the Client Status alerts and for the Endpoint Protection alerts I have set these up on one collection each,
the thing is if you go to the Client Status node under monitoring, by default the collection 'All desktop and server clients' is selected, while this one doesn't even have the alert configured
same goes for endpoint protection, where by default the collection 'All client Systems' is selected ...
what is the purpose of configuring a specific collection for the alerting, if you have to select this every time you look at the monitoring?
try to explain that to customers..

The purpose of configuring alerts for different Collections is that you can have e-mails send to different Groups. When you create subscriptions you can select the different alerts and configure them to mailed to different Groups.
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

SCCM client status show NO

Hi All,
i have deleted obsolete machine from SMS collection
‎‎after that i reinstalled the SMS client and readded the same machine
‎‎still that machine is showing client status is NO
Please help me what to do

Please try this. It worked for me.
Rebuild the repository and WMI services on client
Stop the WMI services and rename the existing repository as
'repositoryold' and restart the services. Initiate all actions once rebuilding respository is completed.
OR
Reset the GUID on client system using Client Action
Tool (CAT)
Add all the client hostnames in CAT
Go to > Client Agent Action
Run > Generate New SCCM GUID.
Wait for actions and initiate all the actions twice. Update the collection members
few time in console then check the client status. It Works!

A single fast connection blocks almost all other network activities

Hi!
If I have a single fast up/download (or enough smaller/slower ones), it is able blocks almost all other network activities:
Torrent without up/down limit => everything else is "timing out" (or something. P.e. load a single page in firefox or ping my router - doing nothing).
Pacman is fetching a package from a fast server => the same.
Pages in firefox don't load if I just stop the fast traffic - it keeps doing nothing until I hit [reload].
Tested a few other network applications (java stuff, wget, curl, whatever pacman uses), it all looks the same.
This hasn't been like this up until a while ago (1-2 weeks?)... during that time, I changed nothing in the whole network except for
1) the arch updates (normal mirrors, no testing)
2) added a debian machine to the network (problem persists if I shut it down though)
Now I don't know where to start searching. Any hints?
Thanks!

As I understand things you are saying one fast connection is blocking out all other connections right?
If so we need some more information.
1. Your basic setup, like are you using a cable modem and what router. wireless?
2. The result of speed tests on your connection both upload and download (e.g. testmy.net)
3. What is the "one" fast connection and how much bandwidth is it taking (bittorrent?)
One thing to look for is that certain routers cannot handle many connections. A few of my old WRT54G routers with stock firmware could only handle 200 connections or so before crashing. So now I use dd-wrt on a WRT54GL.
Some more info on what might be happening:
1. The torrent client is using all the connections so the router cannot handle more connections.
2. The torrent client is taking all the upload bandwidth so the behaviour you describe occurs.
3. The torrent client is taking up all the download bandwidth.
[less likely]
4. Some complex ISP shaping and/or bandwidth limiting?
5. Malfunctioning network hardware locally (i.e. router, NIC, etc.)
6. Wireless router encountering interference thus limiting bandwidth severely?
Some Possible solutions (assuming the common stuff is the case):
1. Get a Better router/firmware.
2. Configure the torrent client to limit connections/upload/download.
3. Setup complex limiting on the local box using iptables.
4. Ties in with #1. Configure router to implement QoS and/or bandwidth limiting based on Application layer protocol/port/Ip address/mac etc. dfepending on situation.
Last edited by davidm (2010-02-07 19:40:38)

On the main window, what is the column to the left of client status icon?

on the main window (ARD version 3), what is the narrow column immediately to the left of the column with client status icon? (The columns to the right of the client status icon are Name, IP address, DNS name, ARD version, and so on)? I can't find this mentioned anywhere in the Remote Desktop manual.
That column is blank next to all the computers except one, which has a blue (aqua) circle.
PowerMacG5dual1.8GHz Mac OS X (10.4.8)

I have now managed to reproduce the blue (aqua-looking) ball. Just as I had at work, I installed ARD v. 3. on a machine on my home LAN, once again setting it up as the administrator machine. To install the client on another machine in the LAN, I then chose the "Upgrade Client Software" option. I entered the username and password of an admin user on that machine, hit "Upgrade" and the installation appeared to go successfully. Upon returning to the Scanner (main) window on my administrator machine, I noticed the blue ball in that first column next to the name of the machine with the newly updated client software.
Was there anything in common between the one machine at work with a blue ball in that column and the one machine at home with the blue ball? The only thing I can think of is that on neither of those 2 machines had I ever manually installed ARD 2.2 client previously. Does that make any sense?

ARD 3.1 Clients status intermittently goes offline

Hi All,
Since we installed ARD 3.0 and even now I have experienced an Issue that I hope somebody out there could help me with?
The environment that I have is as follows;
Many Mac OS X 10.4 clients all running ARD 3.1 and ARD 3.1 server
All clients authenticate on an Active Directory network and using MS server 2003 DHCP, DNS etc etc......
The problem is that I have noticed that clients have been going to 'Offline' status within the machine groups. I have tried restarting the service but to no avail. The only way to resolve this is to delete from computer group and then re-scan network and then re-add to former group and it all is then back to normal??
After investigating this on several occasions, I have noticed that the clients that stop functioning all have the wrong local DNS address as the address is usually for another machine altogether, but the mac machine name is still the same (usually a Windows machine elsewhere!).
Can anybody tell me what is wrong??? All clients recieve an automatic DHCP address, is it a case of giving them all manual IP configuration or is this problem related to something else completely?? I dont want to apply static IP configs to all machines even though at the end it doesn't resolve the issue!
Please help, because this is really frustrating!!

Hiya,
i wouldn't say my clients go offline but I am experiencing similar results with wrong DNS names as you stated.
Same kinda of deal in our shop.
Mixed PC and Macs. MS AD network. PC log onto the domain but mac computers are free standing workstations.
We name our computers in this fashion:
For Macs
CompanyName-MDxx-UserName.domain.com for Desktop Macs where xx is the machine number.
For PC's
CompanyName-PCxx.domain.com for Desktop PC where xx is the machine number.
Some Mac ARD clients (Viewing from ARD) come up as CompanyName-PCxx.domain.com in the
DNS Name field but the Name is retained.
If I launch terminal on these questionable machines, the prompt states the incorrect DNS Name. If I disconnect the network cable and relaunch Terminal, then the prompt is the actual Mac's name from the Sharing Prefs.
Obviously this isn't an ARD issue but since ARD and Terminal both read this value.
My question is: Where is this number being fed from?
Does that make sense?
Thanks.

ARD Clients Status Says Offline but Online

Does anyone also have a problem where certain ARD clients statuses say that they are "offline", yet they are technology online and are still available to control and observe? I have an entire list where half of the client statuses read offline, even though the machines are online and accessible. Does anyone know how to resolve this problem? It is driving me crazy.

Hi TeenTitan,
I tried your method and it also worked. I deleted the client from the All Computers list, and then re-added the client's IP manually within the Scanner. It seems like all 3 of our methods will work depending on the situation. Good stuff. Appreciate your reply!
TeenTitan wrote:
with the computer that shows as offline, but is online, do you see the ip address?
if so, have you tried searching your "all computer" list for that IP address? You might find another computer on your "all computer" list with that ip address. if so:
select the computer listed with that IP address,
get info on that computer record
delete the IP address from the computer record
click done
go back to the computer that was online, but was listed as offline, see if it's not being listed as online. If not, try chicster trick again.
Good luck

Password reset for all clients

Hi
I need to Reset Password on ALL clients within current system for logged on User.
Any suggestions please
Thanks
Regards

Got a Program for this. Am just pasting the code..try it
TABLES: T000, USR02.
DATA: BEGIN OF I_USR02.
        INCLUDE STRUCTURE USR02.
DATA: END OF I_USR02.
SELECTION-SCREEN BEGIN OF BLOCK STANDARD
                 WITH FRAME TITLE TEXT-001
                 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (23) TEXT-005.
SELECTION-SCREEN END   OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (23) TEXT-004.
PARAMETERS NO RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN COMMENT (23) TEXT-002.
SELECTION-SCREEN END   OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (23) TEXT-005.
PARAMETERS YES RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN COMMENT (23) TEXT-003.
SELECTION-SCREEN END   OF LINE.
SELECTION-SCREEN END OF BLOCK STANDARD.
MAIN PROGRAM
IF NO = 'X'.
    MESSAGE I999 WITH
     'Program Terminated at User Request'.
    LEAVE PROGRAM.
ELSE.
    PERFORM CHANGE_PASSWORD.
    SELECT * FROM T000.
      SELECT * FROM USR02 CLIENT SPECIFIED
         WHERE MANDT = T000-MANDT AND
               BNAME = SY-UNAME.
        IF USR02-MANDT = SY-MANDT.
          WRITE : 1 USR02-MANDT COLOR 6 INVERSE.
          WRITE : 5 USR02-BCODE COLOR 6 INVERSE.
        ELSE.
          WRITE : 1 USR02-MANDT COLOR COL_KEY INTENSIFIED.
          WRITE : 5 USR02-BCODE COLOR COL_BACKGROUND INTENSIFIED OFF.
        ENDIF.
        IF USR02-UFLAG = 0.
          WRITE : 24 'Not Locked' COLOR COL_BACKGROUND INTENSIFIED OFF.
        ELSEIF USR02-UFLAG = 64.
          WRITE : 24 'Locked: System Admin.' COLOR 6 INVERSE.
        ELSEIF USR02-UFLAG = 128.
          WRITE : 24 'Locked: incorrect Logons.' COLOR 6 INVERSE.
        ELSE.
        ENDIF.
        WRITE : 50 USR02-TRDAT COLOR COL_BACKGROUND INTENSIFIED OFF.
        WRITE : 61 USR02-CLASS COLOR COL_BACKGROUND INTENSIFIED OFF.
        NEW-LINE.
      ENDSELECT.
    ENDSELECT.
ENDIF.
TOP-OF-PAGE.
NEW-PAGE NO-TITLE NO-HEADING.
PERFORM LISTTITEL.
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM LISTTITEL.
      FORM CHANGE_PASSWORD                                          *
FORM CHANGE_PASSWORD.
SELECT * FROM USR02 INTO I_USR02     "grab userid and store data
    WHERE BNAME = SY-UNAME.
ENDSELECT.
IF SY-SUBRC NE 0.
    EXIT.
ENDIF.
UPDATE USR02 CLIENT SPECIFIED        "Write current client pwd over
     SET                               "other clients that have id in.
      BCODE = I_USR02-BCODE
      OCOD1 = I_USR02-OCOD1
      CODV1 = I_USR02-CODV1
      OCOD2 = I_USR02-OCOD2
      BCDA2 = I_USR02-BCDA2
      CODV2 = I_USR02-CODV2
      OCOD3 = I_USR02-OCOD3
      BCDA3 = I_USR02-BCDA3
      CODV3 = I_USR02-CODV3
      OCOD4 = I_USR02-OCOD4
      BCDA4 = I_USR02-BCDA4
      CODV4 = I_USR02-CODV4
      OCOD5 = I_USR02-OCOD5
      BCDA5 = I_USR02-BCDA5
      CODV5 = I_USR02-CODV5
      CODVN = I_USR02-CODVN
      TRDAT = I_USR02-TRDAT
      LTIME = I_USR02-LTIME
      BCDA1 = I_USR02-BCDA1
     WHERE BNAME = SY-UNAME AND
           MANDT NE SY-MANDT.          "Every client but current.
ENDFORM.                               "CHANGE_PASSWORD
      FORM LISTTITEL                                                *
FORM LISTTITEL.
    WRITE: / 'List of client(s) on which the Password for User',
            SY-UNAME COLOR COL_KEY INTENSIFIED,
           'has been reset.'.
WRITE: / 'Password originated on Client : ',
            SY-MANDT COLOR COL_KEY INTENSIFIED.
SKIP.
WRITE: / 'System: ' COLOR COL_HEADING INVERSE,
           20 SYST-SYSID COLOR COL_KEY INTENSIFIED.
WRITE: / 'Date: ' COLOR COL_HEADING INVERSE,
           20 SYST-DATUM COLOR COL_HEADING INVERSE.
WRITE: / 'Time:   ' COLOR COL_HEADING INVERSE,
           20 SYST-UZEIT COLOR COL_HEADING INVERSE.
ULINE AT (73).
WRITE: /(73) SPACE COLOR COL_HEADING INTENSIFIED.
WRITE: 1 'Cl.' COLOR COL_HEADING INTENSIFIED.
WRITE: 4 SY-VLINE.
WRITE: 5 'Encrypted Password' COLOR COL_HEADING INTENSIFIED.
WRITE: 23 SY-VLINE.
WRITE: 24 'Lock Status' COLOR COL_HEADING INTENSIFIED.
WRITE: 49 SY-VLINE.
WRITE: 50 'Last Used' COLOR COL_HEADING INTENSIFIED.
WRITE: 60 SY-VLINE.
WRITE: 61 'User Grp.' COLOR COL_HEADING INTENSIFIED.
WRITE: 73 SY-VLINE.
ULINE /(73).
ENDFORM.                               " LISTTITEL
Regards

How can i save my individual playlist on itunes on my external hard drive because i want to buy a laptop and install itunes and move all my music and playlist thats on my desktop to my laptop and almost all my music is from a bunch of cd's i own

how can i save my individual playlist on itunes on my external hard drive because i want to buy a laptop and install itunes and move all my music and playlist thats on my desktop to my laptop and almost all of my music is from a bunch of cds i own

Hello ryane84
The easiest and most efficient way to copy your music is to follow the steps under the External drive section. Make sure that you have organized the iTunes library first before you copy it over. Then put the copied iTunes folder in the same Music folder on your computer.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Regards,
-Norm G.

Almost all clients status as Inactive

Similar Messages

Maybe you are looking for