Almost all white screen after moving mouse to turn on the screen on macbook pro
Well, the title say everything
Good day all, after letting my macbook pro inactive for 5 minutes i think, screen turns out, thats normal ofcourse, but when i press a key to turn it on again, it comes a white screen, still can see my background wallpaper a little bit, and under something loading.... oh yeah and it makes a sound like if its starting ...
sorry for the bad english someone can help me please ?
Hello Bri,
I would be concerned too if my MacBook Pro was booting a white screen. I recommend following the steps in the article below for the issue you are experiencing:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Thank you for using Apple Support Communities.
Best,
Sheila M.
Similar Messages
-
KDL-40EX720 horizontal thin lines that appear on screen after 10 minutes of turning on the TV
Hi, I have a KDL-40EX720 that is showing Horizontal Thin Lines on screen after around 10 minutes of turning on the TV (that is when TV is warm), this incident occured after three years of purchasing the TV so it is not covered anymore by the warranty policy or terms.
These thin lines are too many and very thin that seems that screen is partially showing blurred images, this means that my TV screen is split into a part that is like 80% of the screen and covered with these blurring thin lines while the 20% of the screen is still showing normal picture.
I tried several sources of input, to confirm that problem is not only from HDMI, but in all cases it is showing the same, even when you press on the menu button, the display is also affected by these lines.
I sent the TV to Sony Repair and Maintenance Center in my county Lebanon. They said that problem can be in T-CON board that is inside the TV screen, and they also said this board can't be replaced because it is built-in with the screen. Also they can't repair it.
They said that screen need to be replaced, but it will cost me around 600$ that is equal to the price of a new KDL-40W600.
It is obvious that my TV has a faulty component, and I need community support in letting me know what could be the cause of these horizontal thin lines, and if really T-CON board in KDL-40X720 can't be replaced or repaired.
Thanks in Adcance.Please see the other topics in this forum related to your question.
http://discussions.apple.com/thread.jspa?threadID=967815 -
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it. It has worked in the past but I downloaded the update today and photomerge will not work correctly. Any ideas?
hedger,
How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Screen blinking when turning on my Mid 2011 MacBook Pro after recent update.
Just did the recent software update and my Mid 2011 MacBook Pro 13" when turning on the screen blinks until the computer is rebooted/restarted. Have never had a problem before. Of course, my Apple Care just expired the end of June 2014. Is anyone else having a problem?
When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
The screen of my imac always goes to the maximum exposure. Then appear the light icon on the screen. After reducing the brightness goes my screen after a few minutes back to the maximum intensity with the brightness icon back on my screen.
Try resetting the SMC and if that doesn't work then reset the PRAM too.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
Why does my 3GS have a white screen sometimes, and I have to lock the screen for it to go back to lock screen? Sometimes I have to attempt the lock screen several times, and it still doesn't work. I, then, attempt to restart it by powering it down, and the lock screen will appear again. The display goes out sometimes while I am on a call, and I can't hang up. I have to go through this hole process over and over again.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first... -
my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?
There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.
-
When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)
Read here:
http://help.apple.com/ipad/8/#/iPad9a245e3e -
Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??
Hello HaithamOkeely,
We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen -
my mac recently got stolen, after getting a new one i had to reinstall logic studio, but after moving house i have lost the serial number, does anyone know how to get a new one?
Here:
http://support.apple.com/kb/HT1861 -
After updating to Yosemite, my screen saver settings are not maintained. The screen saver reverts to some Apple default. There is no way to get my setting to be maintained.
Hi ..
Might be corrupted preferences.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.screensaver.plist
Click Go then move the com.apple.screensaver.plist file to the Trash.
Restart your Mac then reset your screen saver. -
After trying to update my IPOD the screen goes blue and sometimes yellow
After trying to update my IPOD, the screen goes blue, sometimes yellow.
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808 -
My ibook G4 display greys out after a few seconds, clicking on the screen returns it to normal.
My ibook G4 display greys out after a few seconds, clicking on the screen returns it to normal functioning. I have adjusted the delay times before the computer goes to sleep to no avail, so I'm thinking this issue stems from something else.
Have you tried resetting the PMU? The PMU (Power Management Unit) has control over the sleep function, so resetting it may help if the iBook is sleeping unexpectedly.
-
When I open the control panel of Creative Cloud seems to me all white and if I try to open Muse The
when I open the control panel of Creative Cloud seems to me all white and if I try to open Muse The program asks me an internet connection but I'm already connected and surf regularly. What's going on? What should I do?
1. quit the app (from the task bar) and relaunch. if that fails:
2. Remove the OPM.db file and relogin into the Creative Cloud desktop application using the Adobe ID tied to your subscription.
Mac OS: You can locate the OPM.db file in the \User\<user name>\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion.
Windows: You can locate the OPM.db file in the \Users\<user name>\AppData\Local\Adobe\OOBE folder. To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7.
Maybe you are looking for
-
When I'm asked to sign in I am presented with a non-valid sign in. My 2nd sign-in offering is the correct one. How do I eliminate the first choice for sign in?
-
Bug or feature?. Can`t input symbol in inputfield in webdynpro screen.
Hi all. Sometimes in EP after open webdynpro sreen inputfield available for input (focused field is yellow), BUT cursor is not visible in field and i can`t write text. I try open screen without EP and can`t view this bug. Maybe couse in EP? SAP Netwe
-
How to use Image field in SQL-7 for curvs
I sampling data from a NI-card. There will be a lot of data so I thought I should use Image-field in SQL-7 to save the hole curve. How do you do that?
-
My mac starts up in os x utilities, even when I restart.. What do I do!!
every time I start up my iMac, it just goes into OS X utilities. Even when I restart and reboot the computer it still starts up in OS X utilities how do I fix it or how do I get out of OS X utilities
-
I need to print two arrays in a table, i.e. each array represents another column in the table. I currently have this which outputs the results of each array but not in table format: String[] FN = (String[])setFN.toArray(new String[setFN.size()]);