Aloha, I have a CD-Rom from 2001 that i very much want to access but cannot because i no longer have "classic." There are a variety of video and text files. What is the best way to convert? Any help is greatly appreciated. mahalo.

Buy a cheap older Mac like an iMac.
 Cheers, Tom

Similar Messages

What is the best way of converting a Top Level VI into a 'sub vi' - or function ( without duplicating programming)

Hi,
General question here about design architecture, which i keep running into, but haven't found a really good solution. If i write a 'Top Level VI' to do something, what is the best way of converting it into a subVI - which is call-able from other VIs, while still allowing the top level VI to have synchronised feedback/indicator updates.
I guess the point is that when something is a top level VI you write gui logic about what happens when someone clicks buttons or whatever - which you don't want in the 'sub vi' version.
I did at one point try having a hidden boolean button that was an input to the subVI which would let the VI know if it was supposed to be doing the front panel stuff - or simply running as a subVI. This isn't really ideal though - since it would be better to be able to hive off the grizzly useful stuff from the fluffy - front panel updating stuff - having them together makes the VIs rather untidy. More annoyingly though, if you have the front panel version of it running - say waiting for you to hit 'go', it breaks all the other VIs that use it as a sub vi - since they can't compile when a sub vi is already running.
Another possibility that i tried was to basically duplicate the vi so that there was a backend part, and a front end part - and when i click 'go' the backend part is called as a sub vi. The problem with this is that it really limits the interface that the user gets - since none of the controls on the front panel update with the results untill the sub vi is over. I guess again i could solve this by passing references to some of the controls to update them in the subvi - but this doesn't really seem like the ideal situation if the subvi is called by something else without the same types of controls etc.
One final idea i had was to essentially paste all the controls in the VI into a global variable file, and make the sub vi update them, and the front panel VI read from them. This seems to 'work' - although clearly it is a work around rather than a proper solution - since i spend loads of time worrying about how i update cluster variables in the global - reading and writing.
Does anyone have any guidance on what they do to solve this problem?
JP

You could run a subvis in a Subpanel on your top level. Lets you see the current data while the subvi is running.
--Using LV8.2, 8.6, 2009, 2012--

What's the best way to convert from Gmail to iCloud?

I currently use Google's free exchange server and sync my contacts and calendar to Google even though I pretty much do all my emailing from either mac, iphone, or ipad. Since it sounds like it's hard to sync to both google and icloud at the same time, would like to make the switch. Is there a FAQ out there? Can I keep my google email and sync just the contacts w/iCloud or is it an all-or-nothing proposition? If so, is that what others do? Any advice / pointers appreciated. Thanks.

mike needs help wrote:
What's the best way to convert Raw images to jpegs?
GraphicConverter:
http://www.lemkesoft.com/content/188/graphicconverter.html
Not free either, but the best shareware program ever made for the Mac.

What is the best way to convert mini dv tapes to digital

I have a Canon ZR800 that I have created several mini dv tapes with. What is the best way to convert these tapes I made to a digital format? I have a Macbook to use for the digital format.

Hello Jhoslter,
To transfer footage from the ZR800 to your Mac, you will need a firewire (IEEE-1394) cable and a firewire port on your computer. If your computer is not equipped with a firewire port, we would suggest contacting your computer manufacturer for information regarding which firewire card will work best on your system.
As it is only possible to transfer video to a computer via firewire connection with the Canon camcorder, any video capturing program that supports firewire connections should be fine to use to transfer video to your computer. Canon does not manufacture video capturing programs or support a particular brand.
Canon does not require firewire drivers for any of our miniDV camcorders. Our camcorders use the driver for your firewire card to communicate with the computer.
The appearance of the "DV IN" message in the camcorder's LCD screen indicates that the camcorder has detected your firewire port and is waiting for a signal from the video editing software to begin the transfer of footage. The remainder of the transfer process is controlled by that software; we would suggest reviewing the instructions for that program for further information.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

Ya know what I'm on a brand new MBP just about 24 hours old and you know whats been working amazingly for me. I have a 27inch iMac as well and i've just connected it to my network and been dragging files and apps across the network onto my new MBP. Its really working fast and its flawless. You could always do that option, Just go into sharing options and turn them on for both Macs. Then just click and drag. Of course they have to both be on the same network for this to be possible.
Look at my network.
Shared is what your looking at. I click on there see all my computers files and then drag the ones i want form its folder to my MBP folders. Hope that helps if your looking for a very simple way on a wireless network.

What's the best way to convert a current website into a Fluid Grid Laout?

As the title says....
What's the best way to convert a current website into a Fluid Grid Laout?

See "Using Fluid Grid Layouts (video)"
http://tv.adobe.com/watch/learn-dreamweaver-cs6/using-fluid-grid-layou ts/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

Dw, css, and a template, what is the best way to create a 20 page website with a different header in each page?

dw, css, and a template, what is the best way to create a 20
page website with different header content on each page? i am
trying to insert a specific image and background color for each
header on every page. what is the easiest or best way to do this?
thanks, bryan

"mediastream13" <[email protected]> wrote in
message
news:f47bes$9om$[email protected]..
> ok, murray, here is the site.
http://www.helphotline.org
> in I.E. 6 i can't see the background color behind the
header images,
I'm seeing a hot pink background (which is my browser default
- so that I do
remember to declare a background color). You need to add:
body { background-color: white;} to your stylesheet, or into
the imbedded
styles on your page.
In Firefox, the very top black section, #headertop is hidden
behind the
header image.
> background of the date/time isn't stretching the full
length of the
> screen, and
> the margins aren't working in the main content area. how
can i put a
> background
> color behind the header images?
I can see the header image stretching right across the page..
so not sure
what color is missing there.
> is there anyway to download i.e. six on my computer if i
already have
> i.e.7? i
> just want to be able to preview the site before i upload
the changes. it
> seems
> everything works in i.e. 7.
Yes, I used this and it works really well.
http://tredosoft.com/Multiple_IE
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au

My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle

My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle

My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle

[Solved] What's the best way for me to help with Arch?

I've been using Linux for about 10 years and Arch for a little over a year. I used to do a lot of distro-hopping but I've found that since finding Arch, I haven't been doing much of that. I don't know why it took me so long to find it.
Anyway, I'd like to give back a little so what's the best way for me to help? I'm not a programmer so I'd be no help there. I have made a couple contributions to the wiki and filed a bug. I know that kind of stuff is easy and obvious. Is there anything else I could be doing?
Last edited by brianhanna (2010-04-07 02:25:34)

I hear the Arch Linux Magazine could always use some contributions, if you're inclined towards that sort of thing. I've been wanting to write an article for a while, but I've not run into anything in my Arch experience so far that's really inspired an article out of me.

Everytime i try to open creative cloud installer i get a error code 22 i have tried turning off my firewall and no success. what is the best way forward?

everytime i try to open creative cloud installer i get a error code 22 i have tried turning off my firewall and no success. what is the best way forward?

is that the case-sensitive drive error? Error "Case-sensitive drives not supported" or similar install error | Mac OS

There are over 4000 duplicates in my iTunes. What is the fastest way to delete them?

There are over 4000 duplicates in my iTunes. What is the fastest way to delete them?

Hello there, yandere69keita.
The following Knowledge Base clarifies your concern about your My Photo Stream counting towards your iCloud storage:
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/ht4486
Does My Photo Stream use my iCloud storage?
No. Photos uploaded to My Photo Stream do not count against your iCloud storage.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My wife and I share an Ipad.   We each have our own email address and calendar.   What is the best way for us to backup both accounts (we currently only have 1 ICloud account)?   Thanks for any help!    Alan

My wife and I each have our own email address and calendar. These are on one IPad.   The Ipad has a single ICloud account.
What's the best way to backup both Calendars, etc?   Does ICloud automatically back up every account on the same IPad? (I checked ICloud, but I could only find my stuff.)
Thanks for any help!
Alan

First, you need to understand that there's a difference between "syncing" and "backup". Backup is the saving of content and settings, where syncing is the bidirectional transfer of content for an account to a web-based server (like iCloud, Gmail, Yahoo, etc.)
If you see your calendar in your iCloud account, that implies that you have set up your iCloud account to host (sync) your calendar, and perhaps contacts, email, and notes. An iCloud account can only sync one user's information at a time so it is intended to support a single user. You can have more than one iCloud account, and you can even have more than one iCloud account on the same device (but one has to be primary, and the secondary iCloud has limited capabilities), but a single iCloud account only supports a single user's content.
Backup is the saving of your device's content and settings to use in case you need to recover these things, but you can't see the contents of your backup (just the size and device name). You can backup more than one device to iCloud and you can backup to iCloud or you can backup to your computer, or both (one at a time though, you have to choose).
So, if your wife has her own email and calendar she can certainly do that in parallel to whatever account(s) you have for email and calendar. But if you have only one iCloud account then only one of you can use it for email, calendar, etc. But the backup of these accounts is really just a backup of the device's settings that link the device to these accounts. For example, if she uses Gmail then the backup of the iPad only backs up the fact that your iPad is set up to use her account, it does not backup the account itself (the content of her account is saved and preserved on Google's servers, not your device's backup).
Does that make better sense?

What is the best way of converting everything in a result set into a string

hello folks
What do you think is the best way of converting everything in a resultset into a string???
At the moment I'm using
rs.getString(i);
everywhere (no matter if the underlying datatype is a date or whatever..) it converts automatically evertything expect NULL into a valid string.
Are there better (simple to use..) ways?

I don't see a big switch construct. How about trying the following:
Call this method from your original method by passing the resultset obtained.
public String[] convert(ResultSet rs) {
     int col = ((ResultSetMetaData) rs.getMetaData()).getColumnCount();
     String[] record = new String[col];
     int i=0;
     while(rs.next()) {
          if(rs.wasNull()) record[i] = new String();
          else record[i] = rs.getString(i);
          i++;
     return record;
iDriZ

What is the best way to convert from PowerPoint 2007 to PDF?

Greetings people,
In PowerPoint 2007 I know you can convert to a PDF by way of printing, save as or from the Adobe menu. However, these produce different results.
Is there a reason for this? Can settings be changed to ensure the results are the same regardless of what method is used?
Is there a rule of thumb on which method is best?
Thank you, Jean

A lot depends on what you are after. If you use the printer, you will likely need to use a custom page setting to fill out the page properly and not leave spaces on the sides. I think the standard PPT page is 8.5X10, not 11. PDF Maker (or the Save As Adobe PDF) in PPT sets the size appropriately when I have used it. PDF Maker also adds links and such as appropriate, but the printer does not. Your other option is to use the Save As PDF or XPS which is the MS conversion.
When I tested, the print did go to an 8.5X11 with a border to fit on the page. The other three techniques created the PDF in the same page size as the PPT. The PDF maker and Acrobat menu methods gave the same results, but the file was about 2X the size of the MS method. I did not check the properties that created this different size, but you would have to look at the different options for the creation and see how they compare. The Adobe approach can be kept small also, but may not have used the same options as the MS approach.
If there were links, then the print will not embed these links and bookmarks, but the other techniques will. Maybe that helps some.

What are my options for opening EPS files in Elements 13? What is the best way to convert these to another type of vector file?

I "upgraded" from Photoshop Elements... uh... mad old... to Elements 13 when my work computer got "upgraded" to Win8. Now I can't open EPS files which is how I receive collateral from our ad agency. What other vector files will work, and how can I convert EPS to these? Please be gentle if this is a stupid question - I know enough to be dangerous, but I'm not an expert at design by any means. I'm just frustrated because this isn't quite the "dead" file type that Adobe thinks it is. What was the point of upgrading if I'm pretty much left in the lurch?
Thanks to any and all who can help! Much appreciated . -ASI

adriennesaia a écrit:
I "upgraded" from Photoshop Elements... uh... mad old... to Elements 13 when my work computer got "upgraded" to Win8. Now I can't open EPS files which is how I receive collateral from our ad agency. What other vector files will work, and how can I convert EPS to these? Please be gentle if this is a stupid question - I know enough to be dangerous, but I'm not an expert at design by any means. I'm just frustrated because this isn't quite the "dead" file type that Adobe thinks it is. What was the point of upgrading if I'm pretty much left in the lurch?
Thanks to any and all who can help! Much appreciated . -ASI
What's important to understand is that Elements is a 'pixel' editor, not a 'vector' editor. As such, it has very limited 'vector' capacity (fonts, shapes...) What you are missing from older versions is the ability to convert vector items to standard pixel image file. To be able to open and work on eps files, you'd need Adobe Illustrator, which seems overkill for your purpose.
So, your options are:
- to request your ad agency to supply pdf format images instead of eps ones. My guess is that eps is beeing largely superseded by pdf, but I am not sure...
- Use external tools to convert from eps to jpeg; a Google search would return free softwares like Irfanview or web based conversion.
- You might want to keep (or reinstall) older Elements versions just for that purpose.

Aloha, I have a CD-Rom from 2001 that i very much want to access but cannot because i no longer have "classic." There are a variety of video and text files. What is the best way to convert? Any help is greatly appreciated. mahalo.

Similar Messages

Maybe you are looking for