...along the lines of Quiz Results...Captivate3

Greetings all,
Now I have another problem that I think you advanced users can solve; it has to do with reviewing quiz results. The blurred screen shot is above.
As you can see this is the bottom of a question the student answered. The problem is the rectangle box; it cannot be resized! I've done as one person suggested on another discussion which seemed like a simple fix; to simply enlarge the review area on the storyboard. I had all ready thought of that but it still did not work.
I have expanded the 'review area' on the storyboard slide but this does not have an effect on the published version. This is for a fill in the blank question and there are three blanks on the screen. One might think this would be the problem but it happens even with multiple quess questions; I cannot find the reporting box for this. I think it might be because the Quiz Preferences has a default set and cannot be edited for longer answers.
Thanks so much,
Captv8Novice

Your firmware may have not worked ...in which case you'll need to create a CD from which to boot up with and then try the process again. This article explains it a little better...
http://www.apple.com/support/downloads/firmwarerestorationcd12.html

Similar Messages

I have just redeemed my iTunes card of 25 dollars, I have 23 dolIars left now, I tried downloading a few songs later, but it says something along the lines of credit mismatch mobile message, I can't download anything with credit. How do I fix the problem?

I really need help, I purchased an iTunes card about an hour ago and downloaded two things, I tried to download a couple songs but it won't let me, every time I try it says something along the lines of credit mismatch mobile message. How do I fix this? It says I have 23 dollars left but it's not working. How do I fix the problem? Please help!

its very annoying but you have to log out of your account. than try to buy the sone. it will ask you to sign in. do it. the sond will start to download. it only works once, so you have to do it over and over for every song :/

ITunes unable to recognize iPod, error message along the lines if "iTunes has detected an iPod but unable to recognise" I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this

Hi,
I am need of help! I have had this issue for a while now and it's becoming frustrating.
My iTunes installed on my HP Windows 8 Netbook is unable to recognize my iPod, the error message along the lines of "iTunes has detected an iPod but unable to recognise"
I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this??
Someone please help me fix this problem.
Many thanks.
Matt.

Hi
So just close iTunes and re-open iTunes thats it and that worked for you?
When you say reset your settings do you mean to factory settings? As my iPod was swapped at the store for a new one and the problem is still there...
Thanks.

I bought my I pod touch 3-4 months ago and I got this message all of a sudden, it said something along the lines of provisonal complete_Distrib... will expire in 30 days. What is this it's under setting-general-Profile should I be worried?

I bought my I pod touch 3-4 months ago and I got this message all of a sudden, it said something along the lines of provisonal complete_Distrib... will expire in 30 days. What is this it's under setting-general-Profile should I be worried? Should I just let it expire.

Unless you have a company or school iPod, that profile was installed by an app you installed. It is likely that the app will no longer function when that date is reached. You can Google the name of the profile and that may provide some more information.

Iphone 4s stuck during OS upgrade 1/2 way along the line under the Apple LOGO. what can i do to unstick it.

during an upgrade to the latest OS version on our IPHONE 4S, it stopped updating about 1/2 way along the line under the APPLE LOGO. what can I do to complete, or restart the update?

Hi ..
Depends on whether you're doing this wirelessley or using iTunes > Update your iPhone, iPad, or iPod touch
iOS: Unable to update or restore

Problem!!! Moving point along the line

hi,
I need to move the point along the line. I want move this point using mouse.
My program draws a line and a point that' s on this line.
Could someone help me.

import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import javax.swing.*;
import javax.swing.event.MouseInputAdapter;
public class TraverseAgain extends JPanel {
    Point2D.Double[] points;
    Point2D.Double p1;
    Point2D.Double p2;
    /** An endPoint of one of the lines is being moved. */
    public void setEndPoint(int index, double x, double y) {
        int start;
        double ratio;
        switch(index) {
            case 0:
                start = index == 0 ? 1 : 0;
                ratio = getRatio(p1, start, index);
                resetMidPoint(p1, points[start], x, y, ratio);
                break;
            case 1:
                start = index == 0 ? 1 : 0;
                ratio = getRatio(p1, start, index);
                resetMidPoint(p1, points[start], x, y, ratio);
                start = index == 1 ? 2 : 1;
                ratio = getRatio(p2, start, index);
                resetMidPoint(p2, points[start], x, y, ratio);
                break;
            case 2:
                start = index == 1 ? 2 : 1;
                ratio = getRatio(p2, start, index);
                resetMidPoint(p2, points[start], x, y, ratio);
                break;
            default:
                System.out.println("illegal index: " + index);
        points[index].setLocation(x, y);
        repaint();
     * Design assumption/decision:
     * Preserve this ratio when repositioning a midPoint between the
     * end points of its line when one of the end points is being moved.
    private double getRatio(Point2D.Double p, int start, int end) {
        double d1 = points[start].distance(p);
        double d2 = points[start].distance(points[end]);
        return d1 / d2;
    private void resetMidPoint(Point2D.Double p, Point2D.Double end,
                               double x, double y, double ratio) {
        double dy = y - end.y;
        double dx = x - end.x;
        double theta = Math.atan2(dy, dx);
        double length = end.distance(x, y);
        x = end.x + length*ratio*Math.cos(theta);
        y = end.y + length*ratio*Math.sin(theta);
        p.setLocation(x, y);
    /** A midPoint is being moved. */
    public void setMidPoint(int number, double x, double y) {
        switch(number) {
            case 1:
                double dx = points[1].x - points[0].x;
                double dy = points[1].y - points[0].y;
                if(points[0].x < x && x < points[1].x ||
                   points[1].x < x && x < points[0].x)
                    y = points[0].y + (x - points[0].x)*(dy / dx);
                else if(points[0].y < y && y < points[1].y ||
                        points[1].y < y && y < points[0].y)
                    x = points[0].x + (y - points[0].y)*(dx / dy);
                else
                    return;
                p1.setLocation(x, y);
                break;
            case 2:
                dx = points[2].x - points[1].x;
                dy = points[2].y - points[1].y;
                if(points[1].x < x && x < points[2].x ||
                   points[2].x < x && x < points[1].x)
                    y = points[1].y + (x - points[1].x)*(dy / dx);
                else if(points[1].y < y && y < points[2].y ||
                        points[2].y < y && y < points[1].y)
                    x = points[1].x + (y - points[1].y)*(dx / dy);
                else
                    return;
                p2.setLocation(x, y);
                break;
            default:
                System.out.println("illegal number " + number);
        repaint();
    protected void paintComponent(Graphics g) {
        super.paintComponent(g);
        Graphics2D g2 = (Graphics2D)g;
        g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                            RenderingHints.VALUE_ANTIALIAS_ON);
        if(points == null)
            initGeoms();
        g2.setPaint(Color.blue);
        for(int j = 1; j < points.length; j++)
            g2.draw(new Line2D.Double(points[j-1].x, points[j-1].y,
                                      points[j].x,   points[j].y));
        g2.setPaint(Color.red);
        for(int j = 0; j < points.length; j++)
            mark(points[j], g2);
        g2.setPaint(Color.green.darker());
        mark(p1, g2);
        mark(p2, g2);
    private void mark(Point2D.Double p, Graphics2D g2) {
        g2.fill(new Ellipse2D.Double(p.x-2, p.y-2, 4, 4));
    private void initGeoms() {
        int w = getWidth();
        int h = getHeight();
        points = new Point2D.Double[3];
        points[0] = new Point2D.Double(w/4, h/3);
        points[1] = new Point2D.Double(w/16, h/2);
        points[2] = new Point2D.Double(w*13/15, h*3/4);
        double cx = points[0].x + (points[1].x - points[0].x)/2;
        double cy = points[0].y + (points[1].y - points[0].y)/2;
        p1 = new Point2D.Double(cx, cy);
        cx = points[1].x + (points[2].x - points[1].x)/2;
        cy = points[1].y + (points[2].y - points[1].y)/2;
        p2 = new Point2D.Double(cx, cy);
    public static void main(String[] args) {
        TraverseAgain test = new TraverseAgain();
        PointMover mover = new PointMover(test);
        test.addMouseListener(mover);
        test.addMouseMotionListener(mover);
        JFrame f = new JFrame();
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(test);
        f.setSize(400,400);
        f.setLocation(200,200);
        f.setVisible(true);
class PointMover extends MouseInputAdapter {
    TraverseAgain traverseAgain;
    int selectedEndIndex = -1;
    int selectedMidNumber = -1;
    Point2D.Double offset = new Point2D.Double();
    boolean dragging = false;
    final int MIN_DIST = 5;
    public PointMover(TraverseAgain ta) {
        traverseAgain = ta;
    public void mousePressed(MouseEvent e) {
        Point p = e.getPoint();
        Point2D.Double[] points = traverseAgain.points;
        for(int j = 0; j < points.length; j++) {
            if(points[j].distance(p) < MIN_DIST) {
                selectedEndIndex = j;
                rigForDrag(points[j], p);
                break;
        if(selectedEndIndex == -1) {
            if(traverseAgain.p1.distance(p) < MIN_DIST) {
                selectedMidNumber = 1;
                rigForDrag(traverseAgain.p1, p);
            } else if(traverseAgain.p2.distance(p) < MIN_DIST) {
                selectedMidNumber = 2;
                rigForDrag(traverseAgain.p2, p);
    private void rigForDrag(Point2D.Double p, Point loc) {
        offset.x = loc.x - p.x;
        offset.y = loc.y - p.y;
        dragging = true;
    public void mouseReleased(MouseEvent e) {
        dragging = false;
        selectedEndIndex = -1;
        selectedMidNumber = -1;
    public void mouseDragged(MouseEvent e) {
        if(dragging) {
            double x = e.getX() - offset.x;
            double y = e.getY() - offset.y;
            if(selectedEndIndex != -1)
                traverseAgain.setEndPoint(selectedEndIndex, x, y);
            else
                traverseAgain.setMidPoint(selectedMidNumber, x, y);
}

I think my computer has a virus, when I get on the Internet, ads will pop up all the time, I think it is called adware? Also pages will pop up saying something along the lines of my computer is at risk for some security issue. What should I do?

I think my computer has a virus, when I get on the Internet, ads will pop up all the time, I think it is called adware? Also pages will pop up saying something along the lines of my computer is at risk for some security issue. What should I do?

Remove Browser Pop-up Problems
     AdwareMedic
     Adblock Plus 1.8.9
     remove adware that displays pop-up ads and graphics on your Mac
Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic. If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.

Subject line for quiz result email

Hello,
I am still working with Captivate 2 and I am wondering if
there is a way to set the subject line when emailing the quiz
results.
Because I have several Captivate projects with quizzes, I
would like to distinguish between them.
Thanks for your help,
Matt

Hi Matt
Sure thing. Where you type the E-Mail address, tack on a
question mark followed by subject= so it looks like this:
[email protected]?subject=Any subject here
Note that if you left it at that, Captivate will advise this
isn't a valid address and the dialog won't dismiss. What it's
balking at are the spaces. To overcome this, use %20 where you have
a space. In this case, the line looks like this:
[email protected]?subject=Any%20subject%20here
Cheers... Rick

Along the lines of image resizing

was having similar issues with "grouped" graphics (lines, rectangle, circles) created in Keynote. I tried to resize the collection and it went " winkey" (techo-speak for 'didn't respond as expected'). I tried toggling the constrained proportions options to no effect, I also noticed, when I went to key in a size, instead of filling the height/ width box, the keyed enter would end up on the screen like a text box. ? ? ?
The old ms Windows trick of exiting the application a restating seemed to "fix" the key enter problem for a little while.
Any ideas comments, remedies?
Mac Pro intel Mac OS X (10.5.6) iworks 09 (demo)

Simmilar to whom, MM Holden?
This thread will give you some background: Resizing
Other than that use guides and smaller groups to help with alignments. Until you provide specifics hard to help more than that.

Hi, I am having trouble with my Internet on my Macbook. Every time I try and go to a site it has a pop up block that says something along the lines of "Safari can't verify the identity of the website."

Below that there is more, it says," The certificate for this website is invalid. You might be connecting to a website that is pretending to be (Whatever the name of the site is) which could put your confidential info at risk. Would you like to connect to the website anyway?" and it give the options of show certificate, cancel, and continue. But the thing i dont understand is that it does this for basically EVERY page i visit. even facebook. and when i click "continue" it alows me to go to the page but limits what i can do and only shows certain things. i'm very frusterated with it. Help Me!

This issue was resolved! I didnt think about restoring my computer to factory settings but I did and now my computer works like brand new. basically, just back up your files and do the following:
http://www.youtube.com/watch?v=yPmT5Xbb8p0

HT1923 Each time i connect my ipod touch i get a message along the lines of 'This ipod is not reconised in this version od itunes. Uninstall this version and reinstall the 64-bit version'. I have done this from Apple's website twice now but I still get th

Hi
Can anyone help? I am trying to connect my sons iPod to burn some music to it but I keep getting a message pop up stating that this version of iTunes is not compatible with this iPod and I need to remove my version of iTunes and install the 64-bit version. I have done this twice now, both times using the 64-bit download from Apple's download page, but the same message appears and the iPod is not recognized.
If anyone knows where I am going wrong I would be grateful for your advice.
Ta.

Hi Tintin01,
Thanks for visiting Apple Support Communities.
If you're being repeatedly prompted to install the 64-bit version of iTunes, I'd suggest first completely uninstalling iTunes and all its related components using the steps found here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Once you've uninstalled iTunes and its components, install the latest version of iTunes found here:
iTunes 11.0.4 for Windows 64
http://support.apple.com/kb/DL1615
Best Regards,
Jeremy

Along the lines of How to burn DVD's

I was trying to burn a simple data CD. Dragged the files to the CD in Finder saw the alias, hit burn. After a moment (spinning pinwheel) I get an error message saying:
Burning the disc failed because one or more items in "Desktop.fpbf" could not be read.
Could not read '/Library/Caches/com.apple.IntlDataCache.Ie.4294967294
Is this an error with the disk (they are old Maxell CD-Rs), error with the files being cooked, they are med. res jpegs or as I fear a missing/corrupt file in the OS?
Any help is appreciated.

MH Holden wrote:
I was trying to burn a simple data CD. Dragged the files to the CD in Finder saw the alias, hit burn.
After a moment (spinning pinwheel) I get an error message saying:
Burning the disc failed because one or more items in "Desktop.fpbf" could not be read.
I presume you created a burn folder.
Could not read '/Library/Caches/com.apple.IntlDataCache.Ie.4294967294
Is this an error with the disk (they are old Maxell CD-Rs), error with the files being cooked, they are med. res jpegs or as I fear a missing/corrupt file in the OS?
Any help is appreciated.
Why not really simplify it? Insert a blank, after it mounts double click it to open it and drag a file into the window. It will be an alias of the actual file which is correct and normal.
Select File->Burn Disc and see what happens.
If you want to save money, use a R/W disk for starters.

Along the lines of How To Lead Large Files

I have some mainframe extract files loaded onto a Solaris drive that are between 1 and 4 GB to be used in an initial load of a data warehouse. I can't even open a file with file sizes that large. (We're running JDK 1.2.2 - not sure if that matters.) I'm using this statement -
bufReader = new BufferedReader(new InputStreamReader(new FileInputStream(fileName)));
This is the error I get on that statement -
java.io.FileNotFoundException: /wrhs_data/export.13.aug02 (Value too larg)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:68)
at com.cofinity.importer.MyFileReader.open(MyFileReader.java:40)
at com.cofinity.importer.MyFileReader.main(Compiled Code)
The statement works fine on files less than 220 MB. It breaks somewhere between 220 and 804 MB.
From the error message it seems that the underlying Native call can't handle opening such a large file. I've searched for the "value to larg" sub-message and found nothing. I tried eliminating the BufferedReader and just using the InputStreamReader, but I received the same error.
Does anyone know how Java can read large files in the 1 to 4 GB range? (I suppose I could use something like Informatica to split the files up, but our disk space is at a premium.) Any help would be greatly appreciated.
Thanks,
Steve

Well it appears to fail in open(). I tried your code on a binary file of size 25739135241 bytes (23.9+ gibibytes) on AIX and it did just fine, so it may be something in the runtime, try upgrading to a newer JDK/SDK, failing that, use the OS to stream in your data:
BufferedReader br = new BufferedReader(
new InputStreamReader(System.in)
);And just pipe/redirect your file to your Java processes' standard in.

Captivate Quiz Results Analyzer - Error in Results

Dear Sir
I don't understand why I got the results below. All questions were reflected as 'Total Skipped' when all was answered.
Your inputs would be very much appreciated.
Thanks & regards...

So I figured out I made a stuipd mistake and mixed up acrobat.com and adobe.com. I kept trying to connect to Adobe.com, NOT acrobat.com.
Once I connect to Acrobat.com (and made an ID) it worked.
I now can connect to Acrobat.com.
However, I still am unable to see my results.
If I try to do a quiz from my local machine I am prompted with the "Post Results" button at the end. When I go to production I do not want to have this button, I would rather have the quiz automatically posted. For now, this will work for the testing phase I have working on.
When I run my quiz in IE, IE hangs when I press Post Results and put my name and password in. It never completes. I have to kill the process.
When I run the quiz from File > Preview > In Web Browser (or F12) it seems to work. I get prompted with my ID I put my info in and it says it has been posted, but I never see any results. This is similar to another post I saw here...
http://forums.adobe.com/thread/766837?tstart=0
Then I saw another post that said you need to modify the flash settings on the machine where you are posting. You can do this via a URL link...
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l
When I went to this link the first time I only specified the actually acrobat.com. This didn't seem to help. But them I specified the actually .swf file. This made things appear to work. I *was* able to press post, put login info in and then submit the info. This worked without having the do the preview from within Captivate. But I still do not have any data within the Adobe Captivate Quiz Results Analyzer.
If I do get some results somehow, I would still like to make the quiz such that the username and password are not prompted at the end and that the results are sent to acrobat.com automatically.

Adobe Captivate 6 problem with Review area text on Quiz results page

Hi,
I am using Adobe Captivate 6 and I have a test at the end of my project with the built in 'Quiz results page' at the end.
However, the standard 'review area' provided always seems to play up for me. I have changed the 'quiz results messages' through the preferences and changed the font of the review area, but everytime I play my project the message displayed is in a different font that I did not set and the size is so large that the sentence goes off the screen. It has done this on numerous projects.
I have changed the font of the review area and it shows up on my normal view, but everytime I preview the project or publish it, the font changes back to a strange default.
Does anyone know how I can fix this?
Thank you.

Hannah,
That is a very well-known bug in the last Captivate versions... if you screen these forums you'll find multiple threads complaining about it. Some fonts will work, I think Calibri works (not all styles however) and all the other fonts revert to Times New Roman. I'm a bit puzzled that you call it a 'strange default'.
Lilybiri

...along the lines of Quiz Results...Captivate3

Similar Messages

Maybe you are looking for