Alpha 850 card error

The camera was fine yesteday. today I went to take a picture and got a CF card error. tried multiple cards, same problem. cleared the card, same issue. Fully charged battery same issue. What is going on?  The camera was fine.  3 differnet cards have the same problem but work in other cameras.  What do I need to do? HELP. 

Hi mzoricak,
Welcome to the Sony Community!
I can feel your frustration concerning this issue. Let me see if we can help. Please follow the steps below to troubleshoot this issue:
Remove the memory card from the camera.
Make sure the metal contacts on the memory card are clean.
Turn off the camera.
Remove the battery from the camera for 30 seconds.
Reinsert the battery.
Turn on the camera.
Reinsert the memory card into the card slot on the camera.
If the memory card is still not recognized, try using a different memory card.
Try inserting the card into another device to test if the card is working properly.
Also check the camera terminals for debris or bent pins that may be causing the issue. Check the cards if the lock protection is on. 
If the issue is still unresolved, service may be needed for your camera.
If my post answers your question, please mark it as "Accept as Solution". Thanks_Mitch

Similar Messages

  • No SIM card error

    I'm getting a no SIM card error. When I got a new SIM card it now says no service! My cell provider assures me it's not on their end, which makes sense as we have 2 more iPhones on the same account! Any ideas?

    I would try to verify the steps taken in this article:
    http://support.apple.com/kb/TS4148
    -If after you do all steps and issue still isnt resolved I would contact Apple Store or Apple Care (phone service) tell them all the steps you have done and look into replacement options.

  • Hp officejet pro l7590 with blinking memory card error message

    My all-in-one printer constantly blinks the yellow exclamation point and has the message Memory Card Error for no apparent reason.  I have not used a memory card.  It just decided to show the message and blink.  I turned it off and on again, with no change.  How do I make it stop?

    Experiencing the same problem, so did some troubleshooting of my own.  I am using Windows 7; however, the OS should not make a difference since this is the built-in card reader which can be used without a computer being connected.  Specifically, I was trying to read an SD card to make a proof sheet.
    I knew I had been able to read an older Compact Flash card, so tried that and was successful.  Then I tried an older SD card that is only 128MB -- no problem.  A closer look at the card causing the "Memory Card Error" message revealed that it is a 4 GB SD HC card.  The printer documentation includes Secure Digital in the list of supported memory cards, but not the newer variants.
    Clearly, the error message is caused by attempting to read a non-supported memory card.

  • Windows 7 graphics card errors with games - how do I get/update drivers??

    Just recently installed windows 7 with bootcamp and having some issues with games and screen savers. Most of the screen savers that come with 7 say I need a video card compatible with Direct3D. Secondly, 2 games that I want to play (minecraft and terraria) both give me graphics card errors. Minecraft works fine on the OS X side but says I should update my graphics card drivers. Terraria says the graphics card does not support Direct3D. How/where do I get these drivers or how/where do I update them? The graphics card I have is NVIDIA GeForce 9400M, running on a MacBook Pro 13" Mid 2009 model.

    And you tried the Nvidia drivers, no.
    Windows 64-bit:
    http://www.nvidia.com/object/notebook-win7-winvista-64bit-275.27-beta-driver.htm l

  • Alpha Conforming Values  Error 5323,1461....

    Hi All,
    I am facing the problem with info object of vendor alpha conforming values error..
      I got 53 record errors in PSA level.
    Please tell me how to solve this issue.
    It's very urgent . plz help to me.
    I was checked the Transfer rule alphs Conv check box for vendor.But showing same errors.
    Thanks & Regards,
    Guna.

    Hi,
    i am extracting the datafrom R/3 using data source 2lis_05_q0task.
       I am getting the error is:-
    InfoObject VENDOR does not contain alpa-conforming value 5323.
    like that i got few more values like 1461,1561,1643....
    Please give me solution how to solve this issue.
    Thnaks,
    guna
    Edited by: gunasekhar raya on Jan 23, 2008 2:25 PM

  • My phone has no service because it keeps saying there is a SIM card error - How do I fix this problem?.

    Mutt phone keeps saying no service because of a SIM card error?  What does that mean and how do I fix it?  It has done it twice I today's now and it very frustrating as I cannot make any calls.

    Try reseating the SIM card or replacing it.

  • Error message 'memory card error' with SD card on C5180

    Photosmart C5180 displays 'memory card error' when SanDisk SDHC inserted.  (The card is not damaged, it's new & works in camera.)  I've been unsuccessful in finding  answers on HP site.  Any help most appreciated.  Thanks much.
    This question was solved.
    View Solution.

    Looking at the product specification, I see "High Capacity" (SDHC) memory is NOT supported on the device:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00701803&tmp_task=prodinfoCategory&lc=en&dlc=en...
    I also verified this with our group in San Diego - SDHC isn't supported.
    ~TechHelper7
    I work for HP.

  • No CF card error - card is fine on PC though

    Hi all, I have a EOS 300D (yes I know it's old, but it's good) Since I last took the card out to transfer everything to my PC, I'm getting "No CF card" error when the card's in. At first I thought it must be the card, but I've since put it on a card reader, and it seems absolutely fine. I've reset all the camera settings, and tried to format the card, but it won't read it at all. Any ideas or help please?

    Thanks John, I've since seen this problem reported on here for different models. How annnoying, looks like it's off for repair then. Just when I really needed it too

  • Plz urgent  alpha non confirmation error

    I am getting this errror  alpha non confirmation error
    solution

    Hi naresh kumar ch 
    Some times it happens because of Preceding Zeros
    Just have a look @ the following links..
    Re: Alpha non conforming value
    Hope itz clear a little atleast...!
    Thanks & Regards
    R M K
    ***Assigning pointz is the only way of saying thanx in SDN ***
    **Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
    > I am getting this errror  alpha non confirmation
    > error
    >
    > solution

  • What is alpha non confirmation error?

    Hi,
    what is alpha non confirmation error?
    Thanx in advance,
    Ravi.

    Hi Ravi,
    This error mainly occur when you gone upgradation to new version as you open previous objects in new version..To avoid this problem in BI7.0,in the datasource maintenance window check the flag PSA not typed..It might be also reason that while ur replicating ur datasources,you might had replicated as ISTS datasources..you have to do it as RSDS datasources..other you will get error types RSAR 196,RSAR 245,...Be careful while ur replicating datasources..if you did it as ISTS datasources you can migrate to RSDS datasources by right click on that DS and migrate..
    Thanks
    Chandru

  • Lumia 1020 SIM card error after WP8.1 update

    I updated my wife's Lumia 1020 to WP8.1. Ever since there has been random SIM card errors. The phone just drops the network while it's idle (not during the phone calls) and gives an error message "SIM card error".
    Anybody who has experienced the similar thing after installing WP8.1 update???
    If there's someone from Nokia/Microsoft support team reading this: what should be done in order to get rid of this aforementioned thing?

    Sensonic wrote:
    Nope, it's not a hardware issue.
    The cause, yes. However, that firmware update might have – a guess – broken the hardware forever. Again, it could just be coincidence. I am not able to rule that out from the distance. You have two options: Wait for a firmware patch (which might do a lot of magic and repairs hardware) – or go for Nokia Care Centre.
    Sensonic wrote:
    Taking the phone to the Nokia Care Center and replacing the mother (main) board is not (IMO) a reasonable cure for this problem.
    The first step of bug fixing, is getting aware of the bug. Nokia Support Discussions are designed in such a crazy way, that this step might not have taken by this thread. I am just an end-user like you, but there are very different statements whether this board is monitored by internal support. 
    By the way, the next step is to reproduce this bug – for this, Nokia requires a faulty unit, normally. Therefore, I recommend to go for the Nokia Care Centre option – because waiting – until your warranty might be gone – might not be a good alternative.
    Or stated differently: Sit and wait might end in catastrophe in this case.
    Sensonic wrote:
    I suppose it's not a hardware issue.
    To double-check, we have Nokia Care Centre.
    Sensonic wrote:
    similar symptoms
    Symptoms which sound similar, yes. Same Cause? I do not know.

  • I have purchased apple store card error and i want to buy itunes gift card you have replaced

    i have purchased apple store card error and i want to buy itunes gift card you have replaced
    can you help me

    We are all iTunes users just like you.
    I doubt that anything can be done, but try contacting the store from which you purchased the card and ask them.

  • Sd card error

    I am trying to upload an application that needs to go on my sd card. An error popped up stating that they can it can't up load to the card or usb storage.
    Help!

    leolady wrote:
    I'm having the same problem.  Let me know if you find a solution.  My problem is happening with news related apps.  I had an app and it required an update, but I kept getting the Cannot connect to USB or SD Card error.  I unistalled the app and now cannot install it again (same error)  This also happened with a local news station app.
    Hello leolady!
    I have just a couple of questions; are you able to save other media files to the SD card, such as pictures, videos or other applications?  Are you attempting to download this specific application from the Market or another source, such as a website?  If you are downloading the application from the Market and getting the error, you can reach out to the application developer for further support.  If the application is from another source just ensure you enable "unknown sources" in Application settings on your device to allow installation of apps from other sources.
    Let me know if this works out for you.

  • Corrupt CF Card Error on iMac, but not other computers

    I have tried 5 different CF cards from 3 different manufacturers, 2 of which were band new right out of the box.  Took photos using 3 different camera each time formating the cards. 
    I can download the photos via a USB 3.0 Verbatim card reader to my Mac Mini, or to any of my Windows based bachines with zero problem or error.  But when I try to download the same cards to my iMAC I get persistant corrupt card errors (message says the card was ejected improperly). The card stays mounted, and I can slowely get the photos off the card a few at a time if I eject and reseed the card (properly ejecting). 
    I never had a problem before, it seems like this cropped up about 2 weeks ago. 
    I have narrowed it down to the iMAC as the problem, not the cards, not the card reader persay, and I have tried differnt USB ports, they all do the same thing. 
    funny that I can use that same card reader and cards on any other computer without problem.
    Anyone know what might be causing this

    Hi, it sort of sounds like a low USB power issue on the iMac, might try an AC powered USB hub...
    http://eshop.macsales.com/item/NewerTech/USB2HB7PRO/
    http://eshop.macsales.com/item/MacAlly/TRIHUB4/
    Of course it could be something else...
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • Smart card error

    using exchange 2007, server 2008 r2. Win 7- outlook 2010 users are randomly getting "insert smart card" error. Some very randomly, some 2-3 times an hour. Out of 150 users only 10 having issue. Have checked IIS settings, they are fine. Issues with
    updates were from 2012 and 2013, this started happening last week. Accounts are set up with an exchange account and a pop account. (we house the pop server).
    Nothing makes sense!!! Very frustrating. Anyone help??

    Hi,
    Based on my research, some community members who have a similar issue were able to fix it by adding Office14 STARTUP folder to the Trusted Locations configuration option in
    Word. To do this, open Word, click File -> Options -> Trust Center->Trust Center Settings->Trusted Locations -> Add new location... Then, add the following path to the Path box:
    If you're using 32-bit Windows:
    C:\Program Files\Microsoft Office\Office14\STARTUP\
    If you're using 64-bit Windows:
    C:\Program Files (x86)\Microsoft Office\Office14\STARTUP\
    Please have a try and let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

Maybe you are looking for

  • Select second row of a table

    i have this query to count people who are in different deployment SELECT Trade.Trade, Trade.Auth, (select count(tradeno) from Member where trade=Trade.Trade) AS Held, (select count(tradeno) from Member where trade=Trade.Trade and Status='Present') AS

  • Need a BAPI for Tcode 'OX19'

    Hi,   I need a BAPI for Tcode 'OX19' so that the comapny codes for that Controlling area gets updated in the database. Regards, Deepthi.

  • Material availibility in prod  order

    Dear all , For SFG production order RM required . In prodction order Storage location for this RM is 0001. where as in MMBE stock available for this RM at 0002. still prodn order status is MACM ? Pl guide where to check regards ,

  • Why don't I have the details option in my group text

    Why don't I have the details option in my group text

  • Not dehydrating Aschronous BPEL Process in SOA

    Hi All, Can anybody can guide what we have to do if we doesn't want to dehydrate our asychronous bpel process. FYI.. I have created a asychrounous bpel process and trying out not to dehydrate the instance details of that process in order to increase