Alpha, beta, gamma, delta waves in Logic Pro 9

Can anyone tell me if there is an easy way to create alpha, beta, gamma, delta waves?
Thanks

In response to...
"You're kidding, right? Those are words used to describe electrical fluctuations that result from brain activity. A computer is not a brain and so even if you use it to generate wave forms that match those of a brain in action, it is not by definition an "alpha, beta, gamma, or delta wave."
Let me just say this:
http://www.gobrainev.com/?gclid=CIbpzfzHrp8CFRlZbQodv3pO2A

Similar Messages

S&OP factor calculation (alpha, beta, gamma)

Hi gurus,
I´m trying to adap the automatic forecast selection in MC88 transaction to a graphic company scenario. They have several clients where they planned all the forecast for them, based on increase/decrease sales of each client. Today they are using the alpha, beta, gama factors but they still need to calculate the demand in a Excel spreadsheet and adjust the result in SAP.
My questions are:
- There´s any way to change the factors criteria? For example, if I want to increase the forecast for 2012 in 10% over 2011. If not, anyone knows a way to input this growing factor into the automatic forecast?
- I already found the formulas for the alpha, beta, gamma, but it´s not didactic to explain to some users. Anyone knows where I can find a simple and objective explanation for this factors?
Thanks in advance.
Best Regards,
Felipe Tavares

Hi,
It's your wrong assumption that clients are not using Forecast. Most of the Retails clients are effectively using forecast.
Without forecasting, Retail operation will not work at all.
A demand forecast is a prediction of the amount of each article / product that will be sold in the future. It's easy to see that inaccurate forecasts can cause major problems for your company. When forecasted demand is far below actual demand for a product, you risk running out of products and disappointing your customers. If forecasted demand exceeds actual usage, you'll probably be faced with large quantities of dead stock and slow-moving inventory.
For your company to be successful, your demand forecasts for products must be as accurate as possible.
(a) Alpha is used in the basic value calculation
(b) Beta is used in trend value calculation
(c) Gamma is used in the Seasonal index calculation
The value for the parameters range from 0 to 1. A higher value will place more emphasis on recent history. The parameters also control how reactive the forecast is to changes in historical patterns.
This is FYI.
Bye,
Muralidhara

Help with logic pro 8!!

Hi everyone, I just switched from garageband to logic pro 8 and cant seem to get any sound from my monitors. I'm using a lexicon alpha v interface and my monitors are m-audio av30's. I'm also using a m-audio oxygen49 midi keyboard. This setup worked great in garageband but I cant seem to get it to work in logic pro 8. Logic 8 does recognize the keyboard and I also changed the preferences to the lexicon alpha v but still no sound. I'm really new to this so please be gentle! Thanks

I got a good deal on ebay full retail brand new un-opened box with licences. I couldnt afford logic pro 9 so I went with logic pro 8. Plus I'm still learning, when I get better I'll upgrade to logic pro 9.

Logic Pro X and plugins

So, i'm thinking of upgrading to Logic Pro X from Logic Studio 9. I have a range of plugins like Waves Bundles, Sonnox, SoundToys, etc. I understand that these plugins are saved to Library>Audio>Plug-Ins. If i purchase and install Logic Pro X, can I still use the same plugins, without having to re-install? Or will Logic Pro X automatically create a path to them?
Thanks

Most of them probably will be 64bit but the SoundToys Native bundle isn't yet (unless you are running the beta)
I ended up running Logic Pro 9 then running the AU manager (sorting by company) and capturing the screen (twice as there were many) of the Instruments and Effects plugins. I then ran up the AU manager in LPX and compared the list against the captured screen images and then went to download updates to each plugin that didn't work in LPX. Nearly all had 64bit versions apart from Lenna Digital Sylenth and the Sound Toys Native bundle (the latter coming soon)

Wav file from remix stem pack has no volume - Logic Pro 9

I recently downloaded a remix stem pack and can't get the vocal wav file to play. It show's a wave form, but no volume. If I load a sample wav file, a drum hit for example, it will play no problem. Anyone have any idea's? It's not the wav file as it plays in itunes, and also plays in my friends logic pro.
Thanks

The hierarchy is [LOGIC FILE NAME]>LgDoc>(files ... Displaystate, DocumentData, Windowimage.jpg)
Like this:
You need to recreate the folder structure in order to be able to open the file. (look at the path bar at the bottom of the picture.)
Do not disassociate the displaystate from the documentData files. They should be together. The windowimage file is optional and will be recreated when the file is saved again.
Hope this helps!

How much better is Logic Pro?

Would it be a real disadvantage to get logic express over Logic, i mean has it still got all the loops, synths, drum machines and actual audio recording capabilities?
Thanks

Pro is much better imo, but depending on your budget and needs you might not need it. What I did was to purchase Logic Express first, learned it, liked it and then upgraded from Logic Express to Logic Pro once I found that I wanted the plugins and some options found in pro, this winter. That's a good route since it doesn't cost much more (Express$ + Upgrade$ ~= Pro$) and allowed me to have a much better idea for why I wanted Pro. I might have chosen not to buy it if I found so, but I did (and a the extra time accumulating money helped :-))

Beta Testers required for Logic Pro X Keyboard

Hey
We're the company behind the colour coded shortcut editing keyboards for Logic Pro 9.
We're about to launch our new compatible keyboard for Logic Pro X, however before we do we requrie 5 Beta testers who can check all shortcuts for us.
For your help, you'll get an entirely brand new Logic Pro X keyboard free of charge.
We do only require 5 people, however any additional testers will also be given a 20% of voucher for their time.
Please drop me an email and we can send the new PDF.
Many Thanks
Mark Brown
Editors Keys
Company Director

Hey thanks!
My email is mark.b (at) editorskeys (dot) com

EXS File missing in Logic Pro 9: Unisyncl.wav and Unisynch.wav

Hi to everybody!
I just installed logic pro 9 and this is my first experience with logic.
Using it I noticed that some files are missing. These files are: Unisyncl.wav and Unisynch.wav.
Searching the internet I discovered that those files belong to logic 8 and are located in the folder:
/Library/Application Support/Logic/EXS Factory Samples/05 Synthesizers/04 Sequence Elements/Spectrum Stack 01/UniSyncH.wav
/Library/Application Support/Logic/EXS Factory Samples/Analog Samples/Spectrum SQ/UniSyncH.wav
Please someone can send me them by mail or internet hosting service?
My mail is: [email protected]
Really thanks to all

Yes, I have them - both samples are in both folders:-
/Library/Application Support/Logic/EXS Factory Samples/05 Synthesizers/04 Sequence Elements/Spectrum Stack 01/UniSyncH.wav
and
/Library/Application Support/Logic/EXS Factory Samples/Analog Samples/Spectrum SQ/UniSyncH.wav
These are on the LP8 content disks but not on the LP9 content disks, strangely enough.
These will be only up for a short time as technically it's Apple content. I'm doing this to help you out as you're probably more than a little frustrated. Please post back when you have downloaded them.
http://dl.dropbox.com/u/4211158/soundies/logic/UniSyncH.wav
http://dl.dropbox.com/u/4211158/soundies/logic/UniSyncL.wav

I run logic pro 9.1.5 in 64 bit mode on lion osx and my waves plug ins won't show up. Any suggestions?

recenlty i purchased the Kramer mpx master Tape plug in from waves and i try to make it work in logic but no luck.. I switch it as well in 32bit mode some plug ins from wave are showed up but they are not operational. There are a few of them that i can load up... but the ones i really need are really not there..
Have the logic pro 9.1.5 on lion osx and a mac pro early 2008 model...
Any suggestion that i can every works fluently like it suppose to work?
thanks in advance

The crashed thread (7) mentions logic's preferences file. (com.apple.logic.pro). Drag it to the desktop (so you can reclaim you key commands if it works) and restart logic. Logic will create a new preferences file. Worth a try..

Logic Pro 8 and Delta 1010 random audio stuttering

Since installing Logic Pro 8, I have two problems which I suspect may be related:
1. Launching Logic will sometimes freeze my Mac and bring up that familiar screen that says I must immediately restart. This seems random, happening maybe one time out of 7 or 8.
 2. The other problem is that launching Logic 8 sometimes results in apparent misbehavior by my PCI audio card, a Delta 1010. In such cases, I will immediately hear something that sounds like very loud white noise coming out of the audio interface and into my mixer, but with a rapid stutter (confirmed by the VU meters on the Delta control panel, which vibrate like they're having a seizure). Nothing seems to stop the noise, except quitting Logic and restarting the Mac. This misbehavior seems quite random and there's nothing I've been able to do to track it down or make it repeatable -- all I can do is quit Logic, restart, and hope that this time it works. Fortunately, if I can finally get Logic 8 launched without the noise factor, it runs fine and virtually never crashes.
Anyone have any similar problem or ideas about the cause? I'm thinking about replacing the Delta 1010 with a new Firewire audio interface, in anticipation of buying a new Mac later this year. But I don't want to do it now if it's not the 1010's fault.
(Details: I am using the latest driver for the Delta 1010, downloaded from M-Audio's web site; the latest version of Logic 8 (8.0.1); and Mac OSX 10.4.11. I've got this all running on an older Mac, a G4 Dual 1.25 with 2 GIGS Ram. I've got the Delta 1010 selected as the default input and output in Audio MIDI setup, using the Mac built-in output only for the System Output. None of these issues were happening with Logic 7, and I haven't changed anything since then, except for installing Logic 8 and gradual Tiger upgrades. I also seem to have no problems using the Delta 1010 with Final Cut Pro. I suppose the possibilities are: incompatibility with Logic 8 and some other software, the Delta 1010 card is going bad, an issue with other connected peripherals (USB hub, Firewire Hub, Edirol UM-550), bad ram... or something else?)

Hi,
There are two things to bear in mind here.
1) In my experience, it takes a little longer for the driver to kick in after boot up, so wait a minute before launching Logic.
2) I recently reinstalled the 10.4.10 driver on my friend's Mac (same config as yours) and it now works as it should.
Best Wishes

Unable to import wav sounds into Logic Pro X

I've been struggling with uploading all my sound kits into Logic Pro X. They are wav files. Every tutorial I watch has features that I don't have for some reason. Please help!

Hi
kcelik wrote:
Every tutorial I watch has features that I don't have for some reason.
Have you enabled all the Advanced Tools in the Logic Pro X;Preferences choices?
CCT

Installing Waves Diamond bundle - into Logic Pro 8

Help! i have logic pro 8 installed and have just gotten Waves plug-in. I have installed the Waves in the Applications folder, but cant seem to see where they are in Logic Pro 8 or if they are installed at all in logic??
Any help appreciated!

There should be a Waveshell component in the *Library>Audio>Plug Ins>Components* folder.
But Waves comes with an installer, so everything should be where it should be. I jus installed 6.0.5 to try, and Logic finds over 94 new plugins. Maybe you should install again.
What version is it?

Is a dedicated graphics card better than an integrated graphics card for running Logic Pro?

I am trying to figure out if a dedicated graphics card is better than an integrated graphics card for using Logic Pro. I have heard opinions supporting both. From what I have been told a Mac mini with an integrated graphics card would work just fine. I have also heard that a modest dedicated graphics card could also benefit Logic Pro. Honestly, I have heard more people saying that the integrated graphics card on the Mac mini would do the job. But still, I have heard a couple people (even 2 senior Mac experts) state that a dedicated graphics card (iMac) is the way to go. Maybe a Mac mini with integrated graphics card will do the job, but an iMac would do the job better, I don't know, if anyone could help me I would greatly appreciate it. Thank you.

One thing is Logic Pro and another thing is Final Cut Pro. Logic Pro is a music production app, so it doesn't use the GPU heavily and you can use it with an integrated GPU without any problem. However, video editing apps like Final Cut Pro or iMovie will note the difference

Waves 9 won't work with logic pro x

I downloaded waves v9 but it still won't show up on my Logic Pro. It is a 64 bit polgin

If... you have updated to the latest version of Waves 9
and...
You have correctly installed/activated/validated them using the Waves License Center and the Waves AU Reg Utility (That you must run after installing the updates..) then they work pretty good with Logic. I know.. I use them on a daily basis... No magic... no special tricks...
The Waves plugins themselves still have a few bugs in them which is why Waves keeps updating them..(There have been several updates to Waves 9 since release across all platforms and not just OS X...) but it isn't anything to do with Logic... Its programming bugs in the Waves plugins themselves that cause the remaining issues..
So.. if you cannot get them to work properly, contact Waves support for assistance...
https://www.waves.com/login?ReturnUrl=%2fcontact-support
There is little if anything, anyone here.. or at Apple.. that can do to help you.. and to think its a Logic Pro problem... is just misleading yourself and wasting your own time...

Does anyone know if apple's one-to-one program would be a good way to learn how to use logic pro or am I better off going to school to learn audio engineering or something?

Of course going to school would be a good option, but I want to know if one-to-one is also a good way to learn how to use logic pro. Has anyone been through the one-to-one program for logic pro and can say that they learned how to use logic pro well because of it?

For sure, one to one training, if given by a tutor who is capable, will hand you the means to build up self-confidence and will therefore let you operate the hard/software in an intelligent manner, instead of going for the trial and error method which has its pro's and con's too. Once you've passed this beginners phase you will make your own decisions intelligently and then you will also start to get experience and learn even from your mistakes. Something like that in theory and the rest is up to you!
Have a nice day

Alpha, beta, gamma, delta waves in Logic Pro 9

Similar Messages

Maybe you are looking for