Alpha Man Pro Can Enhanced sleep pattern

Alpha Man Pro Can
Aerobic workout is ruined at the end tag in this factor so essay our work my chest cut that's large muscle and I'm on the bench presses on with the pushups K while I'm doing
these pushups Alpha Man Pro guess what muscles arresting rhomboid tomorrow upper back muscles so while these models are working and then and they're
going to get tired Gonna go over here and do polls this way to the impact is work at means I'm tonnage doing polls Alpha Man Pro Can Make You More Hormonal Change
option Samosa pushes and guess what my heart rate is now doing because the morning go is already going to increase cut I'm going down slow out fast down slow up at same thing about polls I'm tonnage pollen fast and let their backs flow K now how we do this
so we don't call the injury they were already first but the first three repetitions are slow okay that's not you know to write....
For More Info Log On To This Site } http://www.hits4slim.com/male-enhancement-supplement.html

Marcus and others,
You also may need some basic repairs.
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
After that Repair Permissions.
No need to report Permissions errors....we all get them.
 DALE

Similar Messages

  • Mac Pro w/ Fiber Channel, Can it sleep with XRaid attached?

    I wanted to know if the new mac Pro can fall asleep when it has an xraid attached via its fiber channel card.
    My Dual 2ghz G5 does not, this is why I'm asking.
    Your comments are welcomed.

    Not sure, but on the 'old' one,by design, NEITHER the Fiber card and Raid card will allow 'doze' but not 'deep sleep' of the Mac Pro in order to sustain connectivity, battery charge and redundancy, respectively.
    I doubt that changed.
    Anyone?
    d

  • My PC can't sleep after Premiere pro CS6 has been invoked, even if it has been closed

    My PC can't sleep after Premiere pro CS6 has been invoked, even if it has been closed. I think this is true also for Photoshop.
    It fell asleep and immediatly awakes.

    You MAY have a corrupted preferences file
    Reset Corrupted Preferences = Press/HOLD Ctrl+Alt+Shift while starting program
    -except delete file in P6 http://forums.adobe.com/message/4644893
    -and setting http://forums.adobe.com/thread/1058426?tstart=0

  • How can I make my macbook pro go to sleep when I close the lid? Currently it doesn't sleep when on battery.

    How do I make my macbook pro go to sleep when I close the lid?

    For this and other power related issues the best first step to try is resetting the System Management Controller.
    Best of luck.

  • Mac Pro does not sleep with lid open

    Hi this was the original post I posted a couple days ago.
    "Hi All,
    I have had a problem with my mac book pro, it does not sleep while the screen is left open. The way I used to be able to tell if the mac is sleeping is the light on the front should flash as it does when the screen is closed. Here is what has happened in the past.
    1. The original hard drive failed and was replaced with a 500gb
    2. I have had the top case replaced as the mac book pro would not sleep with the screen closed
    3. A clean install with OSX 10.6.8
    After doing all this, the mac is still having the same issue.
    When the screen is left open, I can hear the fans whirring away and the battery is drained as if I am running an intensive program. I can leave it all night with the screen up and wake up to the battery being completely dead. It usually takes about 3 hours or so. (105 cycles on the battery). The settings are set so that the screen and mac hibernate after 1 minute, and all applications are closed with wi-fi, etc turned off.
    When my fathers and my brothers mac book pro is left open, the light on the front of the case flashes.
    I have been to the apple store repeatedly and they are adament there is no issue with the mac. They did all their "tests" and the hardware was tested as "good".
    Thanks for any help!
    Chris"
    The problem was solved with the following:
    1. Deleting Login Items
    2. Turning off blu-tooth
    3. Unchecking "wake for network access"
    Sources given:
    http://support.apple.com/kb/TS3402
    http://support.apple.com/kb/TS4167
    However, the same problem came back last night.
    Any ideas what is causing this?
    Thanks,
    Chris

    I forgot to mention that I followed the same instructions that did solve the problem.
    The things I tried were:
    1. turning off wi-fi
    2. closing all apps
    Doing this however did not solve my problem either.
    Chris

  • Mac Pro will not sleep

    As requested, this is a new post from the "my mac will not wake up" thread.
    I am having trouble putting my Mac to sleep. When I try to enter sleep mode, the fans make noise like it wants to restart, then the monitors go out and immediately back on. It wont stay in sleep mode.
    Ned Snowing seemed to have a pretty good idea of what the problem might be. Ned, can you please follow up from the other post? I think we might be on to something.
    Also, I have a seagate 300gb HD installed in bay two, if that factor is relevant.
    Mac Pro 2.66Ghz   Mac OS X (10.4.7)   2GB RAM ATI X1900 Dual 20" Dell Widescreen Monitors

    I've got a Mac Pro and this is what I see when my Mac sleeps... BUT... I don't see anything when it tries to sleep and doesn't... or rather, when it is supposed to sleep...
    Dec 28 10:52:29 Justins-Cool-Mac-Pro kernel[0]: AFPSleepWakeHandler: going to sleep
    Dec 28 10:52:29 Justins-Cool-Mac-Pro /etc/rc.sleep: executing .sleep of user justin
    Dec 28 10:52:31 Justins-Cool-Mac-Pro kernel[0]: hibernate image path: /var/vm/sleepimage
    Dec 28 10:52:31 Justins-Cool-Mac-Pro kernel[0]: sizeof(IOHibernateImageHeader) == 512
    Dec 28 10:52:31 Justins-Cool-Mac-Pro kernel[0]: Opened file /var/vm/sleepimage, size 2147483648, partition base 0xc805000, maxio 400000
    Dec 28 10:52:31 Justins-Cool-Mac-Pro kernel[0]: hibernate image major 14, minor 2, blocksize 512, pollers 3
    Dec 28 10:52:31 Justins-Cool-Mac-Pro kernel[0]: hibernateallocpages flags 00000000, gobbling 0 pages
    Dec 28 10:52:32 Justins-Cool-Mac-Pro kernel[0]: Intel8254x -- Link down -- 00:17:f2:01:83:ec -- called by disable() -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x45e1
    Dec 28 10:52:32 Justins-Cool-Mac-Pro kernel[0]: Intel8254x -- Link down -- 00:17:f2:01:83:ed -- called by disable() -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x0

  • Macbook Pro Randomly Enters Sleep Mode For A Few Seconds

    Hi All,
    My Macbook Pro has had this problem since a few months after I purchased it. While working or playing the laptop will randomly go into what seems like sleep mode. The screen turns off, I hear the hard drive stop and then a couple seconds later it starts back up on its own. Any Internet connection I had disconnects, but other than that it starts up as normal.
    The problem comes and goes and doesn't seem to be consistent with anything that I'm aware of. Sometimes it happens once, then doesn't happen for days. Often it will happen several times in a row over the course of an hour.
    I've called support and brought the laptop to the genius bar where they ran several tests, but were unable to figure anything out. Research online has shown similar issues with other users, but no solutions. The laptop is not stacked on anything magnetic, the issue occurs when running hot or cold and whether I'm on battery power or plugged in.
    Any help would be greatly appreciated. If this can't be resolved is it something I can bring to apple and get a replacement under my year warranty?
    Specs are below:
    Refurbished 17" Macbook Pro
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.66 GHz
    *Console Log from one pretty bad incident today:*
    Aug 13 12:55:52 Ben-Shepards-MacBook-Pro coconutBattery[1857]: * NSTimer ignoring exception '* -[NSCFArray objectAtIndex:]: index (2) beyond bounds (1)' that raised during firing of timer with target 0x405e00 and selector 'batteryDataThreadTimer:'
    Aug 13 12:58:10: --- last message repeated 8 times ---
    Aug 13 12:58:32 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback WILL sleep
    Aug 13 12:58:34 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
    Aug 13 12:58:37 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback will power on, Currenttime:8/13/2010 12:58:37.034 PM - Waketime:8/13/2010 12:58:35.400 PM = Deltatime:1.633561075
    Aug 13 12:58:39 Ben-Shepards-MacBook-Pro configd[13]: Sleep: Success - AC 96 - Clamshell Sleep
    Aug 13 12:58:39 Ben-Shepards-MacBook-Pro configd[13]: Wake: Success - AC 96 - EC LID0
    Aug 13 12:58:39 Ben-Shepards-MacBook-Pro configd[13]: Hibernate Statistics
    Aug 13 12:58:40 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
    Aug 13 12:58:58 Ben-Shepards-MacBook-Pro ntpd[18]: time reset +0.908918 s
    Aug 13 12:59:08 Ben-Shepards-MacBook-Pro loginwindow[31]: no spins reported for this wake
    Aug 13 13:00:48 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback WILL sleep
    Aug 13 13:00:50 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
    Aug 13 13:00:53 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback will power on, Currenttime:8/13/2010 1:00:53.031 PM - Waketime:8/13/2010 1:00:51.420 PM = Deltatime:1.611223936
    Aug 13 13:00:53 Ben-Shepards-MacBook-Pro configd[13]: PMConnection mDNSResponder com.apple.powermanagement.applicationresponse.slowresponse 128 ms
    Aug 13 13:00:53 Ben-Shepards-MacBook-Pro configd[13]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 128 ms
    Aug 13 13:00:53 Ben-Shepards-MacBook-Pro configd[13]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 130 ms
    Aug 13 13:00:55 Ben-Shepards-MacBook-Pro configd[13]: Sleep: Success - AC 97 - Clamshell Sleep
    Aug 13 13:00:55 Ben-Shepards-MacBook-Pro configd[13]: Wake: Success - AC 97 - EC LID0
    Aug 13 13:00:55 Ben-Shepards-MacBook-Pro configd[13]: Hibernate Statistics
    Aug 13 13:00:56 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
    Aug 13 13:01:07 Ben-Shepards-MacBook-Pro ntpd[18]: time reset +0.836731 s
    Aug 13 13:01:24 Ben-Shepards-MacBook-Pro loginwindow[31]: no spins reported for this wake
    Aug 13 13:04:59 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback WILL sleep
    Aug 13 13:05:02 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
    Aug 13 13:05:05 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback will power on, Currenttime:8/13/2010 1:05:05.026 PM - Waketime:8/13/2010 1:05:03.410 PM = Deltatime:1.616448998
    Aug 13 13:05:07 Ben-Shepards-MacBook-Pro configd[13]: Sleep: Success - AC 98 - Clamshell Sleep
    Aug 13 13:05:07 Ben-Shepards-MacBook-Pro configd[13]: Wake: Success - AC 98 - EC LID0
    Aug 13 13:05:07 Ben-Shepards-MacBook-Pro configd[13]: Hibernate Statistics
    Aug 13 13:05:08 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
    Aug 13 13:05:10 Ben-Shepards-MacBook-Pro ntpd[18]: bind() fd 26, family 30, port 123, scope 5, addr fe80::223:6cff:fe96:9643, in6is_addrmulticast=0 flags=0x11 fails: Can't assign requested address
    Aug 13 13:05:10 Ben-Shepards-MacBook-Pro ntpd[18]: unable to create socket on en1 (51) for fe80::223:6cff:fe96:9643#123
    Aug 13 13:05:17 Ben-Shepards-MacBook-Pro ntpd[18]: time reset +0.413090 s
    Aug 13 13:05:36 Ben-Shepards-MacBook-Pro loginwindow[31]: no spins reported for this wake
    Aug 13 13:05:39 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback WILL sleep
    Aug 13 13:05:39 Ben-Shepards-MacBook-Pro mDNSResponder[30]: DeregisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:0223:6CFF:FE96:9643)
    Aug 13 13:05:42 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
    Aug 13 13:05:44 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback will power on, Currenttime:8/13/2010 1:05:44.024 PM - Waketime:8/13/2010 1:05:42.410 PM = Deltatime:1.614192009
    Aug 13 13:05:46 Ben-Shepards-MacBook-Pro configd[13]: Sleep: Success - AC 98 - Clamshell Sleep
    Aug 13 13:05:46 Ben-Shepards-MacBook-Pro configd[13]: Wake: Success - AC 98 - EC LID0
    Aug 13 13:05:46 Ben-Shepards-MacBook-Pro configd[13]: Hibernate Statistics
    Aug 13 13:05:47 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
    Aug 13 13:05:47 Ben-Shepards-MacBook-Pro mDNSResponder[30]: RegisterInterface: Frequent transitions for interface en1 (192.168.1.103)
    Aug 13 13:05:48 Ben-Shepards-MacBook-Pro ntpd[18]: bind() fd 26, family 30, port 123, scope 5, addr fe80::223:6cff:fe96:9643, in6is_addrmulticast=0 flags=0x11 fails: Can't assign requested address
    Aug 13 13:05:48 Ben-Shepards-MacBook-Pro ntpd[18]: unable to create socket on en1 (54) for fe80::223:6cff:fe96:9643#123
    Aug 13 13:05:51 Ben-Shepards-MacBook-Pro mDNSResponder[30]: RegisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:0223:6CFF:FE96:9643)
    Aug 13 13:05:59 Ben-Shepards-MacBook-Pro ntpd[18]: time reset +1.150003 s
    Aug 13 13:06:04 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback WILL sleep
    Aug 13 13:06:04 Ben-Shepards-MacBook-Pro mDNSResponder[30]: DeregisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:0223:6CFF:FE96:9643)
    Aug 13 13:06:05 Ben-Shepards-MacBook-Pro configd[13]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 225 ms
    Aug 13 13:06:05 Ben-Shepards-MacBook-Pro configd[13]: PMConnection mDNSResponder com.apple.powermanagement.applicationresponse.slowresponse 225 ms
    Aug 13 13:06:05 Ben-Shepards-MacBook-Pro configd[13]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 225 ms
    Aug 13 13:06:07 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
    Aug 13 13:06:11 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback will power on, Currenttime:8/13/2010 1:06:11.026 PM - Waketime:8/13/2010 1:06:09.410 PM = Deltatime:1.616049945
    Aug 13 13:06:13 Ben-Shepards-MacBook-Pro configd[13]: Sleep: Success - AC 98 - Clamshell Sleep
    Aug 13 13:06:13 Ben-Shepards-MacBook-Pro configd[13]: Wake: Success - AC 98 - EC LID0
    Aug 13 13:06:13 Ben-Shepards-MacBook-Pro configd[13]: Hibernate Statistics
    Aug 13 13:06:14 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
    Aug 13 13:06:14 Ben-Shepards-MacBook-Pro mDNSResponder[30]: RegisterInterface: Frequent transitions for interface en1 (192.168.1.103)
    Aug 13 13:06:15 Ben-Shepards-MacBook-Pro ntpd[18]: bind() fd 26, family 30, port 123, scope 5, addr fe80::223:6cff:fe96:9643, in6is_addrmulticast=0 flags=0x11 fails: Can't assign requested address
    Aug 13 13:06:15 Ben-Shepards-MacBook-Pro ntpd[18]: unable to create socket on en1 (57) for fe80::223:6cff:fe96:9643#123
    Aug 13 13:06:18 Ben-Shepards-MacBook-Pro mDNSResponder[30]: RegisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:0223:6CFF:FE96:9643)
    Aug 13 13:06:24 Ben-Shepards-MacBook-Pro ntpd[18]: time reset -0.427840 s
    Aug 13 13:06:41 Ben-Shepards-MacBook-Pro loginwindow[31]: no spins reported for this wake
    Message was edited by: Shep123

    I just found this link and have followed the instructions. Here's hoping...
    http://discussions.apple.com/thread.jspa?messageID=11716177&#11716177

  • How to automatically connect to wi-fi after turning macbook pro on from sleep (without pressing a button!)

    Hi there, I was just wondering how to connect to wi-fi as soon as I turn my macbook pro on from sleep mode
    The thing is, I constantly have to select the network i want, even though I've already set the location to automatic and even added the network to my preference list..
    What else can i do?
    I know a few friends who have the same macbook pro as me but do not have the same problem as me! And even they don't know what to do..

    you've posted in the iPhone forum.

  • Why does my macbook pro "goes to sleep" when charging?

    Why does my macbook pro "goes to sleep" when charging? It is working fine without charging but once I attach the charger to my laptop, it just blacks out or goes to sleep mode and I can't wake it up unless I unpluck the charger.
    I read from threads that it is a logic board problem....How do I solve this problem?

    Try an SMC reset. Follow the method for "a battery you should not remove yourself."
    http://support.apple.com/kb/ht3964

  • My macbook pro goes to sleep by it does not wake up. I have to restart it. I had recently to change the board in the attached Thunderbolt display.

    my macbook pro goes to sleep by it does not wake up afterwards. I have to restart it. I had recently to change the board in the attached Thunderbolt display, because I noticed that the same problem arose when the display was attached.
    Now with the new board, it can't be the display's fault. I hope it is not macbook pro's main board fault. Maybe hasthe notebook board been damaged by the faulty display?
    To bring my MacBook Pro to service will slow down my work. This is why I am posting this message, in the hope to be able to run a diagnostic test myself.
    Thanks a lot, in advance.

    Hello Aminetti,
    It sounds like your computer goes to sleep, and will not wake up, so you must manually restart your computer. I recommend the troubleshooting in the following article:
    OS X: When your Mac doesn't sleep or wake
    http://support.apple.com/kb/TS5357
    Reset SMC
    Reset NVRAM/PRAM
    Test with external devices disconnected
    Try Safe Mode
    Try another user account
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Pro won't sleep automatically

    Bought a new pro and used migration assistant to move stuff from my iMac.
    Now the Pro won't sleep automatically. It sleeps when I tell it to or on Schedule at 0100 but not after x mins of inactivity.
    The iMac it migrated from had no such issues.
    Is there any reset I can do to cure the problem?

    I have about a 2 year Mac pro (intel) and it will not sleep on its own. I can manually sleep it.
    The hard drive cycles up and down about every 2 minutes or so continually and the display remains blank. It will keep cycling the drive until I manually sleep it.
    I tried a few times doing the reset thing and once it helped but in a week or so it started to do it again. I went and made up a new user and it seemed to fix it for a month and then it want back to doing it again. It is very annoying. I even updated it to Leopard and it sill did it. I'll try the reset again and see.

  • MacBook Pro won't sleep, even in safe boot

    Hey gang,
    I can't figure out what to do with this problem. I recently did an archive & install of 10.5 on my 2.33 GHz MacBook Pro Core 2 Duo, and then used software update to get to 10.5.2.
    Ever since doing that, my MacBook Pro will not sleep on its own anymore. It will sleep the display, but it won't sleep the system. (I can close the lid and it will sleep. I can also choose "Sleep" from the Apple Menu, and it will sleep. It just won't sleep on its own.)
    At first I thought it might be Time Machine that was preventing it from sleeping, but I turned off Time Machine and the problem persisted. I tried creating a new user, and the problem persisted. In fact, I EVEN BOOTED IN SAFE MODE AND THE PROBLEM PERSISTED!
    I went through every single step outlined on this page (yes, every single step), and the problem still persisted: http://www.macfixit.com/article.php?story=20070129234938244
    Does anybody have any ideas what I can do at this point? I'm pulling out my hair over here....
    Thanks!
    Scott

    I see you've done your homework. I have this no auto-sleep problem on my Mac pro and none of those things worked for me either but I thought you should give them a shot.
    I made a little sleep program of my own. You are welcome to try it. It's a very simple shell script that checks system idle time and if it's bigger than the sleep timer you set in system preferences it puts your computer to sleep. It will work so long as you can manually put your computer to sleep from the apple menu.
    You'll also need to create a launch daemon to periodically run the script.
    here are the steps to do it.
    1. copy and paste the following into TextEdit.
    #!/bin/bash
    idl=$"`ioreg -c IOHIDSystem | awk '/HIDIdleTime/ {print int($NF/1000000000); exit}'`"
    sleeptimer=$"`defaults read /Library/Preferences/SystemConfiguration/com.apple.PowerManagement "Custom Profile" | grep "System Sleep Timer" | awk '{print $5}' | sed -e 's/;//g'`"
    st=`expr $sleeptimer \* 60 `
    if \[ $idl -gt $st \]; then
    shutdown -s now
    fi
    2. Format it as *plain text* (shiftcommandT in TextEdit) and save it as sleep.sh (don't use the .txt extension) at the top level of your hard drive.
    3. make it unix executable by entering the following command in terminal.
    *chmod 755 /sleep.sh*
    4. Download and install [Lingon|http://lingon.sourceforge.net>.
    5. Open Lingon and create a new *Users Daemon*
    Call it,say, com.sleep.launchd (the name is not important)
    On line 2. enter /sleep.sh
    and in section 3 set it to run every 30 seconds.
    Click save (you'll have to enter your admin password).
    6. Restart.
    That's it. Once this is done you can forget about it. The sleep settings are still controlled from system preferences. The sleep agent will work with every user and even over the login window.
    To uninstall it, open Lingon, select the launch daemon you made and uncheck the box "Enabled" in the upper right corner. save and restart.

  • MacBook Pro won't sleep when charging

    My 15" i5 MacBook Pro won't sleep when charging; a reboot of the machine solves the problem temporarily, but it always recurs.  When I close the lid and listen carefully, I can hear hard drive activity; the drive sounds like it keeps spinning up every 10 seconds or so.
    This is not an issue when trying to sleep when running on the battery only. Any advice?

    I don't have launch2net installed.
    I'm not sure how this will help, but here's the last 5 lines from Console:
    11-07-13 5:19:46 PM          Butler[156]          cache: adding applications...
    11-07-13 5:19:46 PM          Butler[156]          cache: adding addresses...
    11-07-13 5:19:47 PM          Butler[156]          cache: categorizing...
    11-07-13 5:19:49 PM          Butler[156]          updated abbreviations cache (enabled)
    11-07-13 5:19:58 PM          SIMBL Agent[133]          warning: failed to get scripting definition from /Applications/Utilities/Console.app; it may not be scriptable.

  • MacBook Pro won't sleep or shutdown (intermittent problem)

    Every so often my MacBook Pro won't sleep or shut down. I can't find any rhyme or reason to it.
    I notice the problem when I close lid, and it doesn't go to sleep. I then hit apple menu:sleep, and it does nothing. I hit shutdown, and OS shuts down, but gets stuck at blue screen with spinning circle indefinitely. Have to hold power button for 5 seconds to finally shut down. Startup is then slow, but doesn't give me an error message indicating improper shutdown or failure.
    Most of the time it sleeps fine and shuts down fine.
    Other posts seemed to have the problem more reliably, and the fix had to do with startup items. Mine is intermittent, and the only items in my startup folder are Norton Antivirus and Parallels.

    I am also experiencing the exact same problem you are describing. Completely random when the machine will not sleep or shutdown, although it seems to occur more often when I've had the machine running for a few days, moving between home and office locations.
    I have VMWare Fusion and Office 2004 installed. No iStatPro. I'm wondering could it be related to the kernel extensions that VMWare and Parallels install? Is anybody experiencing the non-shutting-down problem who doesn't have either VMWare or Parallels installed?
    I found the following section in my system.log file that occurred the last time the machine wouldn't shut down. May be of some use to somebody
    Aug 31 18:07:10 monza loginwindow[90]: sendQuitEventToApp (Microsoft AU Daemon): AESendMessage returned error -1712
    Aug 31 18:07:21 monza shutdown: halt by james:
    Aug 31 18:07:22 monza SystemStarter[14860]: authentication service (14870) did not complete successfully
    Aug 31 18:07:28 monza SystemStarter[14860]: The following StartupItems failed to properly start:
    Aug 31 18:07:28 monza SystemStarter[14860]: /System/Library/StartupItems/AuthServer
    Aug 31 18:07:28 monza SystemStarter[14860]: - execution of Startup script failed

  • MacBook Pro went for sleep and not waking up

    mAC bOOK pRO WENT TO SLEEP AND NOT WAKING UP

    Contact Apple.
    You can try   Reset SMC
    http://support.apple.com/kb/HT3964

Maybe you are looking for

  • How do you change fonts in an HTML report?

    Hello all, I need to create a report from a test that I've written, and my only feasible option is HTML. Unfortunately, I know next to nothing about HTML, so I'm using the LabView VI's to build the report. In the attached VI, I've written a program t

  • HP LaserJet 1020 drivers for MacOSX Lion 10.7

    Hi, I'm trying to add LaserJet 1020 to MacOSX 10.7 (Lion). According to this page this printer is supported by Apple and its driver comes with OS. But when I'm adding the printer in the "Print & Scan" it says that the driver for this printer is NOT a

  • SharePoint WorkSpace 2010 in Office 2013

    Hello, How come users who have brand new systems with native Office 2013 to access SP WorkSpace 2010? WorkSpace 2010 installer is not available to download from MSFT Website. Is there any alternative way to install Workspace 2010 in Office 2013 syste

  • Battery trouble with first ipod!!

    apologies if i have posted in the wrong section...just new. have just aquired one of the first ipod models 40gb. the battery is lasting for a half hour only!! Is it possible to purchase a new battery? any advice/help appretiated...many thanks claire

  • There is no sound on my ipod or itunes, what is wrong?

    There is no sound on my ipod or itunes, what is wrong and how do I fix it?