Alpha non confirmation error
Hi,
could you help for this below error..
"ALPHA NON CONFIRMATION"give the details of errror
Hi naresh,
In Infoobject screen , we have conversion check box , there we have to give ALPHA as conversion routine. Actually when defining the length of the characteristic, we have to give this ,for example if the length of the your chact is 1(for ex: Pid is 1) , but u have given length while defining chact as 12 then , u get its value as 000000000001 in the infocube , but in the report u get 1 only .
But if u wont give ALPHA as conversion routine there in the Infoobject screen, then u will definitely get ALPHA conversion error.
I hope this will help u a lot.
Thanks& Regards,
Ravi Alakuntla.
Similar Messages
-
Plz urgent alpha non confirmation error
I am getting this errror alpha non confirmation error
solutionHi naresh kumar ch
Some times it happens because of Preceding Zeros
Just have a look @ the following links..
Re: Alpha non conforming value
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
> I am getting this errror alpha non confirmation
> error
>
> solution -
What is alpha non confirmation error?
Hi,
what is alpha non confirmation error?
Thanx in advance,
Ravi.Hi Ravi,
This error mainly occur when you gone upgradation to new version as you open previous objects in new version..To avoid this problem in BI7.0,in the datasource maintenance window check the flag PSA not typed..It might be also reason that while ur replicating ur datasources,you might had replicated as ISTS datasources..you have to do it as RSDS datasources..other you will get error types RSAR 196,RSAR 245,...Be careful while ur replicating datasources..if you did it as ISTS datasources you can migrate to RSDS datasources by right click on that DS and migrate..
Thanks
Chandru -
hi gurus,
This ramesh. Please telme anybody HOW DO WE GET ALPHA NON CONFORMING VALUE (ERROR)? WHAT IT MEANS?HI
You may not have alpha routine exists in transfer rules,please check your transfer rules for your data source,where you getting this error...in transfer rules you will get it in reght side of the left pane..please check against your info object..
and also,Please check alpha conversion has been done or not for this object..you can run it in transaction 'RSMDCNVEXIT'
Hope it helps
Thanks
Teja -
I created a calculated column "Expiration Date" in SharePoint 2010 with formula, =IF([Contingent Hire]=TRUE,(Created+90),(IF([Contingent Hire]=FALSE," ")))
This works in the SharePoint list but when I go to edit the Edit Form in Designer. I get the error specified in the title of this post. I'm trying to make it so the Expiration Date is blank when another column, "Contingent Hire" (a YES/No
column) is FALSE.
The Edit Form is essentially a DataViewWebpart. If I remove the " ", like so, "(IF([Contingent Hire]=FALSE,))" from the calc column, the error goes away; however, the Expiration Date field does not
remain blank like I want it to.
Does anyone have any suggestions? (Below is the error generated when I open Designer and then try to open the Edit form for the corresponding list containing the calc column)
JackSki123Hi Jack,
Could you provide a screenshot about this issue?
As Dimitri suggested, you can install the update for your SharePoint Designer and check again.
And you can also check if you can display "NA" instead of " " in your calculated column per the following post.
http://rajeshspillai.blogspot.in/2012/03/server-returned-non-specific-error-when.html
Thanks
Daniel Yang
TechNet Community Support -
Hi,
I have a hyper-v host running Windows Server 2012 R2 Standard with Hyper-V on it, and on that host I got 5 virtual machines running and of those 5, 4 of those the DPM are able to backup but when DPM tries to backup a server running Windows Server 2003 R2
I get the following errors in the eventlog.
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18014
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' was cancelled. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18014</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>411</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18012
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' failed. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18012</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>412</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 10150
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Could not create backup checkpoint for virtual machine 'SERVER01': Element not found. (0x80070490). (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>10150</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>413</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4280" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
<Parameter0>%%2147943568</Parameter0>
<Parameter1>0x80070490</Parameter1>
</VmlEventLog>
</UserData>
</Event>
What I have done to try to troubleshoot this issue is:
Reinstalled DPM - No sucess
Restarted the Hyper-v Host - No sucess
I'm at the point where I am out of ideas and google hasn't given me much.
/Josephi have the same error.
"vssadmin list writers" shows last error unknown for all writers
disk space is sufficient
ntbackup of systemdrive and systemstate runs fine.
i installed KB940349 which fixes some vss related issues but the problem is still there.
any ideas?
Thanks.
When you have vssadmin reporting unknown error the only way to reset the vsswriters (as I understand it please correct me if I'm wrong :) ) is to restart the machine. The Fellenator is correct, make use that the vsswriter is working correctly since this
is the main function DPM is using when taking backup. He's also right in saying that it's outside the scope! Create a new thread on your error, then you will get much better responce!
/Joseph -
Hello,
Last week we began seeing some timeout errors, but today there have been much more of them and I’m not sure how to proceed in troubleshooting.
We have 2 load balanced app servers:
Windows Server 2008 R2 (virtualized)
ColdFusion 8, Enterprise
And a database server:
Windows Server 2008 R2
SQL 2012
The error in “coldfusion-out.log” is:
A non-SQL error occurred while requesting a connection from <DSN>.
Timed out trying to establish connection
This only happens on one of the web servers, but it happens more frequently when the app servers is under a heavier load. Most of the day it works fine, but 4 or 5 times throughout the day we will have 1 – 15 requests timeout in a row(always varies), and then things will be fine again w/out restarting or doing anything.
The database server is much more powerful than the app server, and I don't believe the issue involves long running queries or the DB server being under heavy load.
I’m a DBA who is temporarily handling System Admin responsibilities, and I’m not sure how to further trouble shoot this. I just started some pings going from the app server to the database using IP and the listeners name. How else can I prepare for the next time it happens. What other logs should I be looking at to gain some insight? Are there PerfMon counters I could use to help troubleshoot?
Thanks for your help!I've had several timeout since the pings were started. Got a some response times > 1ms (nothing greater than 7 or 8ms), but no timeouts.
-
Hi,
Could you please comment on this ..
1.Once I issued the PO to vendor, I will mention the Confirmation of vendor in the PO(ME22N) .
Is there any standard report in SAP that can provide the list of non confirmed PO by the vendor ?
2.We can maintain the reminders for each material (Purchase value key).Eventhough we maintain here ,As far as I know the system will not send the reminders to the supplier automatically.Is there any option to send Automatically ?
Thanks & Regards
GopiHi
You nedd to configure the Message output types and conditions records for sending the reminders.
Message types:
LPMA:Reminders and urging messages relating to delivery schedules with cumulative quantities
LPMF: Reminders and urging messages relating to delivery schedules without cumulative quantities
Regards
Ramakrishna -
Benchmarking problem ORiON solaris 10 - non test error occured
Hi,
I am running a whole bunch of ORION jobs in sequence against raw LUNs on an EMC storage using Solaris 10.
This to identify the performance at different read/write percentage and random/sequential IO patterns.
Once in a while, in the middle of testing the following appears :
Non test error occurred
Orion exiting
After which the test aborts.
I am trying to investigate the cause for this error, the DMESG and /var/adm/messages left turned up nothing however.
The strange thing is that the next test using the same amount of LUNs but only a difference in random or sequential pattern (or read/write percentage) works just fine.
Does anybody have any reference to what are possible causes of "non test error"
Thanks
sebThis forum is about using Sun Studio. Your question is about tripwire, which is not a Sun product, and gcc, which is not Sun Studio. I suggest you take your question to a tripwire forum. Check the location where you got tripwire for a support forum.
-
Agent 12c raises "Incident (non-critical) error / XML-20221"
Hi ,
our agents (12c) are raising once in a while the following error:
2012-08-14 20:14:18,910 [36:pool-1-thread-1] ERROR - Incident (non-critical) error:
oracle.sysman.gcagent.upload.UploadStoreForward$dequeuer$ResponseXMLException: <Line 1, Column 2332>: XML-20221: (Abbruchfehler) Ungültiges Zeichen in Text
at oracle.sysman.gcagent.upload.UploadStoreForward$dequeuer.processNotificationValue(UploadStoreForward.java:2126)
at oracle.sysman.gcagent.upload.UploadStoreForward$dequeuer.xferFile(UploadStoreForward.java:1826)
at oracle.sysman.gcagent.upload.UploadStoreForward$dequeuer.run(UploadStoreForward.java:2221)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
In CloudControl the error shows up as "Diagnostic Incident"
Internal error detected: oracle.sysman.gcagent.upload.UploadStoreForward$dequeuer$ResponseXMLException:oracle.sysman.gcagent.upload.UploadStoreForward$dequeuer:2126
Help help will be appreciated...
Rgds
JHSorry for being that late :-(
Yes, it's a bug and the recommended solution by Oracle ist top patch/upgrade CloudControl...
Rgds
Jan -
Alpha Conforming Values Error 5323,1461....
Hi All,
I am facing the problem with info object of vendor alpha conforming values error..
I got 53 record errors in PSA level.
Please tell me how to solve this issue.
It's very urgent . plz help to me.
I was checked the Transfer rule alphs Conv check box for vendor.But showing same errors.
Thanks & Regards,
Guna.Hi,
i am extracting the datafrom R/3 using data source 2lis_05_q0task.
I am getting the error is:-
InfoObject VENDOR does not contain alpa-conforming value 5323.
like that i got few more values like 1461,1561,1643....
Please give me solution how to solve this issue.
Thnaks,
guna
Edited by: gunasekhar raya on Jan 23, 2008 2:25 PM -
Hello!!! Everybody,
I have Win Server 2008 R2 contain Domain controller (No Hyper-V). I have to take "SYSTEM STATE DATA BACKUP". I have ran following command on this Server.
c:\>wbadmin start systemstatebackup -backuptarget:d:
but backup was not successful & I got following error in command prompt.
" A VOLUME SHADOW COPY SERVICE OPERATION HAS OCCURRED : <0X800423f4>. THE WRITER EXPERIENCED A NON-TRANSIENT ERROR. IF THE BACKUP PROCESS IS RETRIED,THE ERROR IS LIKELY TO REOCCUR."
I also ran following command to know exact problem.
c:\>vssadmin list writers
I got following error
Writer name: 'NTDS'
Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
Writer Instance Id: {21c57902-5037-467b-b9a3-72ed41c9723e}
State: [11] Failed
Last error: Non-retryable error
I also checked Event Viewer & got following 3 noserror.
(1) Event ID : 8229, Source : VSS
A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error. If the backup process is retried, the error is likely reoccur.
Process ID : 608
(2) Event Id : 412, Source : ESENT. Task Category: Logging/Recovery
lsass (636) Unable to read the header of log file "\\?\Globalroot\device\harddiskvolumeshadowcopy2\Windows\NTDS\edb.log".Error:546
(3)Event Id : 521 Source : Backup
The backup operation that started at '2014-05-13T01:44:31.444000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348129'. Please review
the event details for a solution, and then rerun the backup operation once the issue is resolved.
I have also restart the server but problem is not resolved. I have no SQL in my Server.
I also re-register the VSS components with the help of following website.
Website Link : https://kb.acronis.com/content/45776
You are requested please solve my problem on very urgent basis.You can refer below link for your issue
http://waynestorey.com/blog/2012/01/18/windows-backup-fails-with-event-id-521-error-code-2155348129/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Dreamweaver CS4 Mac – non-startup – Error: 150:30
Hi, any help would be appreciated.
Dreamweaver CS4 Mac – non-startup – Error: 150:30
"Licensing for this product has stopped working". Transferred to new computer via Time Machine back-up.
ThanksSee if anything here helps: https://helpx.adobe.com/creative-suite/kb/error-licensing-product-expired-cs4.html
-
'Non-Fatal Error 5904'. LabView 7 application. 'Source: Comm Analyzer - CP Analog - Adjust Input Level.vi:CP RX Audio Muting.vi' (MRTE 3.0 - Anritsu CDMA Test System)
What does this mean?
/BCU002
Hardware Engineer•Design Reliability/Performance and Validation Group•Wavecom, Inc. - Research Triangle Park, N.C.•http://www.wavecom.comXaq,
Here is the comment that was passed about the error source: Comm Analyzer - CP Analog - Adjust Input Level.vi:CP RX Audio Muting.vi
The application has been working fine for about 12 years, it continues to serve its purpose and the RF test equipment rack components are now obsoleted by newer models but it's still in weekly use and is kept calibrated annually but on occasion it unexpectedly throws an error like this while I'm using the test rack during a wireless RF parametrics test and it leaves me wondering if the root cause is the device under test or the test rack. That's why I was hoping to find a detailed description about the error code.
/Bruce
/BCU002
Hardware Engineer•Design Reliability/Performance and Validation Group•Wavecom, Inc. - Research Triangle Park, N.C.•http://www.wavecom.com -
Hi All,
We are getting below fatal error while repairing the repository. and we are using MDM SP07 Patch Level 27.
Error Message: $$$ Non-fatal error (1202): Foreign Key u2018FCM_1_CO_OWNER(Owner_Id) referencing A2i_CM_Users (UserId)u2019 is missing.
Can anyone help me how to resolve this issue ?
Thanks & Regards,
MaheshHello,
I guess you have upgraded your system and hence you are getting this error.
I guess some lookup table are missing the reference in this.
But the error says NON-FATAL, please check if you are getting the same error while checking the repository.
My suggestion would be to unmount and mount the reposiory again.
regards,
Abhishek
Maybe you are looking for
-
Can no longer digitally sign PDF's with Adobe Reader 9
On our government network some of us have been upgraded to Adobe Reader 9 but now we can no longer digitally sign some PDF files. People with Adobe Reader or Pro 8 can. Here is a link to one of the documents: www.unl.edu/nrotc/Nc3065.pdf I'm also att
-
I've ban told to email complaints to [email protected] hope u get a reply as I've not had any luck with this company and I'm still chasing my tablet that was sent for repair 2 months ago. I will never again buy a Lenovo product and I've advised my f
-
Dear all, I wanted to activate the work flow which could trigger Mail to Specific users at change of document status. ie when ever a Document is Placed for Inspection Request Status, Rejected Status, Changed status. What are the configuration setting
-
my mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?
-
we can't play any games. it says we need to install additional plug in, for flash player. when we attempt to install, it says we already have the newest version installed. but nothing works. can not find the install anywhere. we had a computer person