Alpha Numeric Department Code
Hello Experts,
I want to know the answer of very concept in HR.
Can we have AlphaNumeric Department Codes.
If Yes,than please explain the Process.
Thanks ,
Viru
Hi Virendra,
As our Guru's told that alpha numeric code is not possible for department. But if required you can maintain the description as Alpha numeric, because in all the reports only test will be displayed, not the code. So according to your requirement go ahead.
Hope its clear.
Thanks & Regards
Bharathi
Similar Messages
-
have purchased adobe photoshop elements 13 from amazon and have been unable to find a 24 alpha numeric access code on box or on disc sleeve, need your help
do you have a white box inside the outer box and containing the disc sleeve/disc? In my case, it was on the white box. For Photoshop elements it is all numeric and starts with 1057.
Brian -
Photoshop elements 13: alpha-numeric redemption code not accepted
I purchased adobe photoshop elements 13 and cannot load the
redemption code on window 8 because it will not accept the alpha letters??Have you tried
Redemption Code Help -
Spotlight bringing up alpha numeric codes for contacts, not names
When I do a spotlight search on names, spotlight brings up long alpha numeric codes instead of the actual names of my contacts. If I click on the code, I am taken to the address book record of the contact.
Strange...
One code is:
4CDBA0BE-853D-11D9-9F1A-000D932E2424:ABPerson.abcdp
Anyone have an idea what this means and how to fix this?
Thanks
iMac 2 GHz Intel Core Duo Mac OS X (10.4.6) 2 GB DDR2 SDRAM
iMac 2 GHz Intel Core Duo Mac OS X (10.4.6) 2 GB DDR2 SDRAMHi, get_jr. Welcome to the Discussions.
I presume you mean you are doing a Find (Finder > Command-F) search for:
Search location: Home (selected in top slice of Find window)
Name: Contains: nameofperson
If you do it that way, you get the results you indicated as it's finding the extracted Address Book metadata entry that Spotlight uses to index Address Book contacts. Every Address Book contact is saved twice:
(1) Once in the Address Book database — which Spotlight cannot index.
(2) Again in a separate XML property list file — that Spotlight can index — in your Home > Library > Caches > com.apple.AddressBook > Metadata folder. Each Address Book contact saved in this format is given a specially generated file name that can also be used for syncing these entries with iSync and .Mac.
The reason you see the search results from Find is that the Name search criterion searches against the kMDItemDisplayName metadata attribute. For the text files of type (2) above, the value of the kMDItemDisplayName attribute is sent to the name of the person in the contact record. However, the search results show file names, as it is a Finder window, and hence displays the specially-generate file name, rather than the contact name, since that is the file name of the result.
If you search using the Spotlight icon for nameofperson it should return the Address Book contact using the person's name.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
Alpha Numeric - GL account numbering
Hi
Our client is going for alpha numeric GL accounts. FS00 will allow creating alpha numeric GL accounts. But i wanted to what may be problem in future?
I want to know will any account determination settings like OBYC (FI - MM Settings), VKOA (FI - SD settings), AO90 - Asset accounting GL determination or any other FI process will give problem at the time of configurations or in future?.
Please help me on this. What can be the points on the basis of which i can tell client that they should go for NUMERIC GL accounts only and not Alpha Numeric.No other feedback ?
Avoid using alpha characters – they will create problems in sequencing
and sorting data in reports, assigning codes, using ranges, and when
creating validation and/or security rules”
What does security rules in this context ? -
Unable to replicate both Numeric and alpha numeric vendors records from R3
Dear all,
In our ECC 5 environment, we have some vendors who master record numbers that are numeric internally assigned i.e 7000000 or 23000000 and some alphanumeric externally assigned i.e SmallBusiness1 or Grinad10. This is posible as you may know via vendor account groups.
We have implemented a classic scenario in SRM 4, Server 5 environment, therefore we need to replicate ECC backend vendors masters. We initally set SAP's AB business Partner (vendors) number range in SRM to A - zzzzzzzz and created numeric number ranges to match thoes set up for all our vendors in ECC.
When we ran BBPGETVD only the alpha numeric vendors records replicated down to SRM. The numeric were ingnored. The BBPGETVD t-code was reporting that the other vendors had incorrect data.
We then chnaged the AB Business Partner (vendor)number range to 000000001 - 999999999 and ran BBPGETVD. Only then did the numeric vendors get replicated down to SRM. But the issue is now, I cannot replicate the alpha numeric with out chaanging the number range back to A - zzzzzzzzz.
Question,
How can I set the Business Partner(Vendor) number range in SRM to anable the replication of both Numeric and Alpha numeric assigned vendor records down to SRM.
Thanks,
GraceChristophe,
PLEASE HELP I HAVE AN URGENT ISSUE NOW!!!
On the subject of setting back the internal BP number range, does SRM expect it to be set for example to:
01 0000000001 - 0000999999?
Should the grouping for this internal number range be also ways set to 0001. Iam refernceing the settings in our sandbox client, they seam to be set up that way.
If its set to say 0003, will this cause a problem?
Because we have set all our BP ranges to external, any ORG unit, USER or position that we created after we "removed" the internal number range does appear to be working.
I have noticed this. when I login as a new user and try to create a shopping cart, tthe product category drop down does not work on the "new user".
If I go in the BP transaction and search for this new user or new unit org units that where created after the removal of the internal number range nothing is found!. The last internal BP number is 105.
Question.
If I set the internal number range back to
01 0000000001 - 0000099999 and set the current number to 106, then delete and recreate the org units, do you think this will work?
Please help I need to get this issue sorted out because as you said no new org unit/user can be setup.
Thanks Again.
Grace -
Hi
IS it supported in GL code combinations to have a alpha numeric values in key segment values .. we have a project segment in our chart of accounts and need the aplpha numeric values eg PRT001 , ADT001 etc . We do have some customizations and wondering if code combinations would have any impact
Thanks
VedaYes you can have alpha numerics.
Regards,
Gareth -
Removing Non-numeric characters from Alpha-numeric string
Hi,
I have one column in which i have Alpha-numeric data like
COLUMN X
+91 (876) 098 6789
1-567-987-7655
so on.
I want to remove Non-numeric characters from above (space,'(',')',+,........)
i want to write something generic (suppose some function to which i pass the column)
thanks in advance,
MandipThis variation uses the like operators pattern recognition to remove non alphanumeric characters. It also
keeps decimals.
Code Snippet
CREATE FUNCTION dbo.RemoveChars(@Str varchar(1000))
RETURNS VARCHAR(1000)
BEGIN
declare @NewStr varchar(1000),
@i int
set @i = 1
set @NewStr = ''
while @i <= len(@str)
begin
--grab digits or (| in regex) decimal
if substring(@str,@i,1) like '%[0-9|.]%'
begin
set @NewStr = @NewStr + substring(@str,@i,1)
end
else
begin
set @NewStr = @NewStr
end
set @i = @i + 1
end
RETURN Rtrim(Ltrim(@NewStr))
END
GO
Code to validate:
Code Snippet
declare @t table(
TestStr varchar(100)
insert into @t values ('+91 (8.76) \098 6789');
insert into @t values ('1-567-987-7655');
select dbo.RemoveChars(TestStr)
from @t -
Alpha numeric no. range for PERNR (Employee no.)
HI,
Any option for adding alpha numeric no. range for PERNR (Employee no.)
RXBetter you can use Numeric only....
see the sap help
External intervals can only contain either letters or numbers, as sorting can differ between platforms (Code page):
Allowed: 000001 to 999999
AAAAAA to ZZZZZZ
Not allowed: AAAAAA to 999999 -
Alpha Numeric number Ranges for Sales order Acording to sales office wise.
Hi Experts,
I have a Issue for genrating sales order numbers With Alpha Numeric Number Ranges for sales office wise Internaly . How can we get this is there any Userexits or badi for this . If Any one Come across this issue plz guide me.
The Alpha characters should not change that will be sales office region code. only the Numeric numbers should change .
Ex; Abc-123000 to Abc-200000
Regards,
Ravi.This alpha-numeric format is not possible directly with SNRO settings.
You need to opt for external number range, and in the exit of your respective transaction you need to takecare of this number generation explicitly by programming.
http://www.sap-img.com/sap-sd/number-ranges-in-sales-order.htm
any more inputs from experts are welcome..
Hi,
1. goto include MV45AFZZ and to user exit Save_document This form is called before COMMITand double click on FORM USEREXIT_SAVE_DOCUMENT.
2.it will show the program MV45AF0B_BELEG_SICHERN from were this user exit is called, selcet the program and click on Display.
3. you can use the enhancement point enhancement-point beleg_sichern_01 spots es_sapmv45a. just below the PERFORM USEREXIT_SAVE_DOCUMENT to call the badi method on_costing_component.
regards.
santhosh reddy
Message was edited by:
Santhosh Reddy
Message was edited by:
Santhosh Reddy -
Generating Random Alpha numeric Salt String using MD5 or other algorithm
Hello,
I have a requirement where i need to generate a random alpha numeric salt for MD5 algorithm. Is there a best way to generate this salt ?
The alpha numerics should confine to 5 digits with possible values for each digit being (a-z), (0-9), (A-Z).
Any good random generator for salt would be appreciated.
Thanks.Hi there,
I think the book you read is the book "Java Security", I have that one too.
Please read all those pages before this code.........
In this code, it used the RSA algorithm to do the encryption and JDK DOES NOT support
RSA algorithm....
Beside, this line
KeyPairGenerator keyPairGenerator = KeyPairGenerator.getInstance("RSA", "BC");It implies the BouncyCastle security provider is in use.... so
www.bouncycastle.org might be a good place to start with....
Good luck! -
Convert Alpha-Numeric to Numeric values
Hi,
I have a requirement like there is a doc.no. which has alpha -numeric values (Eg:DA 112333).
When i extract this value i should be able to get only 112333 as the final output.
How can i achieve this?
Its not a fixed thing that only first two values will be alphabets it can occur anywhere in the sequence.
Thanks in advance
MerlinHi,
Check if you can make use of this sample code..
Report xyz.
DATA: l_str TYPE c LENGTH 10 VALUE '3D5X12YZ35',
l_str1 TYPE c LENGTH 10,
l_alpha TYPE string VALUE 'ABCDEFGHIJKLMNOPQRSTUVWXYZ',
c TYPE c.
DO 10 TIMES.
c = l_str.
IF c CA l_alpha.
c = space.
ELSE.
CONCATENATE l_str1 c INTO l_str1.
ENDIF.
SHIFT l_str LEFT.
ENDDO.
CONDENSE l_str1.
WRITE l_str1. -
BEx report hangs- selecting Alpha numeric values
I am working on the existing customer report
customer is the selection parameter for my report.
Issue is Customer has numerical and alpha numerical values.
If i give parameter rangs of value is numerical
01 - 500 query works fine
01-50cust1
50 cust1 - 195 cust2
query hangs.
Is their any way we can improve the query performance .
for searching alphanumerica values.
I have a workbook is built based on the query.
morethan 6 queries attached in the sheet 1....sheet2
each sheet has it is own query with values.
when I refresh and execute the workbook with the customer alphanumerica values it hangs.
Query is built based on the multiprovider.
Please help me onthisHello,
Try exporting in the 'fully formated grids and text'. It shouldl give you the 'member alias' used in the report.
Looks like if you export in the 'querry ready grids and text' it will show the 'member name' as in database although the report may have used the 'member alias'.
Regards -
Restating my issue / question...
When I send email from this iMac, there is a string of characters assigned. The characters are all the "alpha numeric" characters on the QWERTY key board. This only occurs when email is sent from this iMac. The issue does not manifest when using any other lap top or computer.
Hence, I have ruled out the issue is a yahoo mail matter.
Again, I can access the Yahoo mail account form multiple devices and send email without unintended assignment of character strings, but when I send wmail using this iMac, the issue happens everytime.
Characters are stacked verticaly in a column. It looks as if all characters (except function keys) are included in the string.
Any ideas?
GMcPlease read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).
How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).
Maybe you are looking for
-
After the iOS 4.2.1 update iPhone 4 no longer has the Safari app
I updated to 4.2.1, everything seemed to be fine until I noticed that the Safari app was missing. I tried to restore from backup twice and it's still missing. Anybody else having this problem?
-
Is mac mini compatible with samsung smart tv
is mac mini compatible with samsung smart tv
-
Can I use single words in a paragraph to show other elements on the stage?
I want to put a paragraph on the stage. The paragraph would look like this: " Yada yada yada... so either click here to read Note1, or click here to read Note2. " As you might guess, I want the user to be able to click the underlined words in the
-
Any hints on using iPod Touch outdoors?
One of the reasons I wanted an iPod touch was the availability of nature field guides. I bought the iBird Plus app and recently tried to use it instead of carrying around a hard copy field guide. It works fine in the shaded woods, but even with the
-
Time machine backup fail repeatedly
It keeps telling me its 'already in use'. What the heck does this mean. I don't want to keep unplugging to resolve this problem. Why can't APPLE come up with permanent solution? It didn't happen for the first year or two of ownership and is now a gre