Alpha Numeric Number range in billing

Dear friends,
We have a requirement related to number range determination in billing doument and the requirment is as below -
a.  Number Range need to determine as alpha numeric
b.  No External number ranges to use and always determine as internal
c.  The codification for the number range is as below -
1S59000001 - Codification for number range
For your information, in our scenario billing is generated automatically through batch run.
Than
Best Regards,
Goutham

Hi,
You cant maintain the INTERNAL NUMBER RANGE with Alphanumericals.
For this you have to use the USER EXIT
Try this user exit 
USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ
regards,
santosh

Similar Messages

  • Alpha Numeric number Ranges for Sales order Acording to sales office wise.

    Hi Experts,
             I have a Issue for genrating sales order numbers With Alpha Numeric Number Ranges for sales office wise Internaly . How can we get this is there any Userexits or badi for this . If Any one Come across this issue plz guide me.
       The Alpha characters should not change that will be sales office region code. only the Numeric numbers should change .
    Ex;   Abc-123000  to Abc-200000
    Regards,
    Ravi.

    This alpha-numeric format is not possible directly with SNRO settings.
    You need to opt for external number range, and in the exit of your respective transaction you need to takecare of this number generation explicitly by programming.
    http://www.sap-img.com/sap-sd/number-ranges-in-sales-order.htm
    any more inputs from experts are welcome..
    Hi,
    1. goto include MV45AFZZ and to user exit Save_document This form is called before COMMITand double click on FORM USEREXIT_SAVE_DOCUMENT.
    2.it will show the program MV45AF0B_BELEG_SICHERN from were this user exit is called, selcet the program and click on Display.
    3. you can use the enhancement point enhancement-point beleg_sichern_01 spots es_sapmv45a. just below the PERFORM USEREXIT_SAVE_DOCUMENT to call the badi method on_costing_component.
    regards.
    santhosh reddy
    Message was edited by:
            Santhosh Reddy
    Message was edited by:
            Santhosh Reddy

  • Alpha numeric number Ranges

    Hi Folks,
    Can somebody suggest me if we want to use alphnumeric number ranges Ex:A09XY234 for  student masterdata what are the problems we have to face inSAP.
    Vara

    Dear Vara,
    I assume you mean the studentnumber and not the object ID's?
    In SAP SLM there is a standard switch which you can use to choose a numeric student number or alphanumberic. Beside that you have a Badi which gives you more flexibility:
    Requirements
    You need to implement the business add-in for assignment and checking of student numbers in the following cases:
    You want to use numeric student numbers which must comply with special rules and have a check digit, for instance.
    You want to use alphanumeric student numbers.
    IMG: SLCM --> Master data in SLCM --> Student Numbers and Object ID's --> BAdI: Student Number Assignment
    Because the student number is an attribute (abbrevation) of the object (1000) ST you will likely will not face problems in SAP SLM with an alphanumeric student number.
    Rob

  • External number range for Billing Document

    Hi Gurus,
    Can you please let me know how to get the external number for the invoices? I know there is no standard way but if there is a way around to determine it. And the external number should be first 2 places are alphanumeric and dynamic and the next 2 places are also alphanumeric but constant and the rest of the digits should be a serial number of length 7. So, the total length of the number range should be 11. Please let me know if there is way to determine it this way.
    Example:
    AB + HY + 1000001
    CD + HY + 1000002
    Like wise.....
    Thanks in advance.
    Regards,
    Gangi

    hello, friend.
    you can define your number ranges using VN01.  in here, you can set up alpha numeric ranges and specify external.
    technically, you can assign this set to the billing type using VOFA. 
    however, it is not best practice to assign external number ranges to billing types, as it is possible to 'jump' the sequence of the numbering.  you do want to keep track of the sequence of billing docs.
    a possible exception is if you have an external billing software which generates a number, which you will then capture in SAP.  barring exceptions, it is best to retain internal assignment.
    regards.

  • Alfa Numeric Number range creation

    hai SD experts .can any body help me in this issue your help will be rewarded...
    i am using 4.7 i know number range creation but i want to create ALFA NUMERIC NUMBER RANGE AND ASSIGN IT TO MY SALES ORDER  can any body help me in this issue with detailed steps pls
    advance thanks
    rag sam

    hi
    Pls try with the following ,Hope it will help u out
    Number Ranges can be maintained Internally by the system, however it can be maintained externally also if you customize it accordingly.
    In Standard SAP the Transaction code for Maintaiing Number ranges externally is VN01.
    Defining - The same can be reached through in IMG as : Sales & Distribution>Sales>Sales Document Header-->Define Number Ranges for Sales Documents.
    Here you provide the system a specific Number range as follows:
    Number range Key Start Number range End Number Range+Current Number
    For Example: If you want to propose the following Number Range
    *1     9000076000      9000076999      0
    The Current Number field will be kept zero as you are proposing new number range and no sales documents have been created on it , Obviously..
    *1 is a Unique Two digit Alphanumeric Key, while proposing your key, you should ensure that it should not be there in the system as existing.
    If you propose a key that is there in the system or if the Number Range (Start and End Series) is there in the system already, the system will throw a message that Interval already already exists. So choose a key that is unique, and which is not there in the system.
    Here , by making this , you are assigning a Key to a Number Range Series.
    All the symbols can be used along with numbers from 0 to 9 and Alphabets from A to Z and in any order. For example: !1, ^A, BB,Z*,M2.........
    Assigning - In Assigning, you assign the particular Sales Document to the Number Range you have already proposed as above.
    The Assigning Part is done as follows:
    The Two digit Alpha Numeric Key is maintained or Assigned to the respective Sales Document type in V0V8.
    This can also be reached in IMG by:
    Sales & Distribution>Sales>Sales Document Header-->Define Sales Document Types
    Locate the particular Sales Doc Type, and double click on it to display it configuration. Here you put the Two Digit Number key in the Field- "Number range External Assignment"

  • How to configure Alpha Numeric No range for the Material Type

    Dear Expert,
    i kindly request for expert help on alpha numeric no range for the Material Type.
    business is looking for material no like 910442208571D. at present we have no range like 9000000000000 to 9999999999999
    how i can configure in the system??
    pl. help me on this
    Thanks a lot
    H shah

    Hi,
    System will not bring alphanumeric number of materials automatically during MM01.
    Check use exit MGA00002 - Material Master (Industry): Number Assignment.
    Also check 2 Function Modules:
    EXIT_SAPLMG02_001 - Customer Exit: Internal Material Number Assignment
    EXIT_SAPLMG02_002 - Customer Exit: External Material Number Assignment.
    Regards,
    Biju K

  • Number range of billing doc and accounting doc to be same

    Hi Gurus,
    Can any one help me out to make the number ranges of billing doc and accounting doc same every time.
    Even though the invoice is cancelled the same no range should come for cancellation accounting doc.
    Thanks in advance
    Dushyant

    Hi,
    Create or change the same interval for the BILLING DOCUMENTS & ACCOUNTING DOCUMENTS in VN01 and FBN1*
    For BILLING DOCUMENTS assign this Number range in the VOFA transaction code for the Billing document tyes*
    For ACCOUNTING DOCUMENTS assign this Number range in the FBN1 for your company code and fiscal year*
    activate the External Field [] . this is mandtry
    please check and revert back.
    regards,
    Anup Shukla

  • Guide in configuring number range by billing type in SD

    Hi gurus,
    Hope you can assist me in configuring number ranges by billing type (e.g. F2, G2, L2, etc) in SD.  Our Accounting people find it hard to account the completeness of the transactions because we are only using one range for the RV (SD docs).  We would like to setup a separate series per billing type.
    Your immedaite assistance is highly appreciated.
    Frances

    Dear Frances,
    1st Part
    Go to, T. Code: SNRO
    Insert, Object: RV_Beleg
    and Click Tab: Number ranges (just above the Field: Object)
    On to next screen, Click Tab: Intervals (with pencil-icon)
    Here, maintain your Number ranges, that you wanna assign to your Billing Doc. Types, i.e. F2, G2, L2 etc..
    2nd Part
    Go to, T. Code: SM30
    Insert, Table/View:
    and click Tab: Maintan (down, at screen)
    On to next screen, maintain entries as:
    Sales Org + Dist. Chnl + Sales Doc. Type (i.e. Billing Doc.) + IntNR (as maintained in 1st Step)
    Best Regards,
    Amit

  • Alpha numeric no. range  for PERNR (Employee no.)

    HI,
    Any option for adding alpha numeric no. range  for PERNR (Employee no.)
    RX

    Better you can use Numeric only....
    see the sap help
    External intervals can only contain either letters or numbers, as sorting can differ between platforms (Code page):
    Allowed:  000001 to 999999
                   AAAAAA to ZZZZZZ
    Not allowed:  AAAAAA to 999999

  • External Number Range for Billing Documents

    Hi Friends,
    Can any pls tell me how to create external number ranges for billing documents. We are trying to Map the Invoice nos from POS system to create and match the billing nos in both the systems. Pls help on how can I do this.
    Thanks
    Raj

    Check this thread
    [Re: Customize Billing Number Format|Re: Customize Billing Number Format]
    thanks
    G. Lakshmipathi

  • External number range for billing document (Invoices)

    Hi guys,
    I have a requirement from one of client to implement external number range for billing documents.
    I can only see a provision for internal number range in customising for Billing document type.
    Please can you assist me with detailson how to set up external number range for billing documents (Invoices).
    Thanks, Felix

    Hi Felix
    I think the similar requirement is in Venezuela also.
    So pl. check the SAP Note 849438 . As per the note :-
    The solution is delivered in the indicated support packages. In case you can not implement the correspondin support package for your release immediately, please follow the procedure described below:
    1. In the Data Dictionary Editor (transaction SE11) please open the definition of domain J_1AOFFNREL, go to the fixed values and add value 'P' with description 'Number Assingment using Prenumbered Forms' in a position so that the possible values remain sorted alphabetically.
    2. In the Message Editor (transaction SE91) please go to message class ICC_CN and add the new message 837 with text '&1: Official doc. numbering is not available for delivery documents!'.
    3. If you are implementing the note in release 4.6C, please create the following function modules:
    o     OFF_NUMBER_LOCAL_ASSIGN_VE in function group FIN2, and then copy the interface (all parameters and exceptions) of the function module OFF_NUMBER_LOCAL_ASSIGN_TW
    o     OFF_NUMBER_LOCAL_NUMBERING_VE in function group FIN2, and then copy the interface (all parameters and exceptions) of the function module OFF_NUMBER_LOCAL_NUMBERING_TW
    o     XBLNR_BUILD_AND_SPLIT_VE in function group IDSDCNUTIL, and then copy the interface (all parameters and exceptions) of the function module XBLNR_BUILD_AND_SPLIT_PECL
    4. Implement the source code corrections as shown below.
    The following customizing actions should be also executed when the solution by delivered by the corresponding support package. If you applied the solution manually, then please use the IMG activities listed in the section Cross-Application Components -> General Application Functions -> Cross-Application Document Numbering -> Taiwan as a reference. After the installation of the corresponding support package the customizing node for Venezuela can be used.
    1. Enable the use of business place for country Venezuela as described in the OSS Note 726537.
    2. Define the necessary document classes and configure the document types you would like to get an official document number as relevant for official document numbering in the desired mode. Please check the OSS Note 571376 for some explanations about the meaning of the different settings.
    3. Define the necessary number ranges and intervals and assign them to the combination of company code, business place, document class and validity period. If you use the customizing activity for Taiwan, then please leave the prefix field empty.
    Regards
    Amitesh

  • How to determine number range for billing document based on company code ..

    Hi Friends!!
    can anybody tell me how to determine number range for billing document based on company code & tax departure country if required??
    Amit...plz help me!!

    Hi Amit,
    1. Define different Billing Document number ranges in  SPRO -> Sales & Dist -> Billing -> Define number ranges for billing docs. (VN01). Make sure that all are internal number ranges.
    e.g.
    NO.  From number To Number    Current number  Ext
    A1   0930000000    0930999999
    A2   0940000000    0940999999
    A3   0950000000    0950999999
    2. Define a Ztable ZNUMB_RANGE as follows
    Comp. Code | Tax departure country | Billing Doc Type | Number Range
    100                IN                               F2                      A1
    200                IN                               F2                      A2
    200                US                              F2                     A3
    3. In user exit RV60AFZZ (USEREXIT_NUMBER_RANGE)
    Read table ZNUMB_RANGE for Number Range with Comp. Code, Tax country and Billing Doc.
    If found pass this number range value to us_range_intern.
    us_range_intern is a standard SAP variable which tells program which number range use to create the current document which is under process.
    Let me know if you are clear.
    Thanks,
    Mandar

  • Number range for billing document..its urgent!!

    Hi Friends!!
    can anybody tell me how to determine number range for billing document based on company code & tax departure country if required??
    Amit...

    Hi,
    Look at object RV_BELEG in t.code snro. It  is the number range object for SD Documents. Click on Number Ranges and then Intervals to view the different number ranges and associated intervals.
    Now look at t.code 0vlk, which is Define Delivery Type. If you double-click on a delivery type BV it goes to more detail. See the field: "NR int. assgt.". This is the number range for delivery type BV.
    This number range will be used in any company code or tax departure country that this delivery type is used in.
    Regards,
    Shamma

  • External Number Range for Billing documents in CRM

    In CRM, billing document external number range can only be numeric or alpha, but NOT alphanumeric. Is this a bug or is there some legitimate reason to have this limitation.
    This question stems from a data conversion where the legacy system invoice numbers are alphanumeric. So when we try to convert those invoice numbers, CRM cannot handle the external alphanumeric number.

    Check this thread
    [Re: Customize Billing Number Format|Re: Customize Billing Number Format]
    thanks
    G. Lakshmipathi

  • External number range for Billing type

    Hi
    In standard we can only enter internal number range. Is it possible to enter external number and assign it to billing type.
    Regards
    Debasish

    Hi
    Please reward the points if you feel this answer help ful for you.
    Go to transaction snro.  in that maintain number ranges what eve you want and mark as extenernal in that after that go to vofa in that select the tab as number range inter assingmeent in that assingn your number range what you assign in that.
    Please reward help ful
    Thanks & Regards
    rack29

Maybe you are looking for