Alpha Numeric number Ranges for Sales order Acording to sales office wise.

Hi Experts,
         I have a Issue for genrating sales order numbers With Alpha Numeric Number Ranges for sales office wise Internaly . How can we get this is there any Userexits or badi for this . If Any one Come across this issue plz guide me.
   The Alpha characters should not change that will be sales office region code. only the Numeric numbers should change .
Ex;   Abc-123000  to Abc-200000
Regards,
Ravi.

This alpha-numeric format is not possible directly with SNRO settings.
You need to opt for external number range, and in the exit of your respective transaction you need to takecare of this number generation explicitly by programming.
http://www.sap-img.com/sap-sd/number-ranges-in-sales-order.htm
any more inputs from experts are welcome..
Hi,
1. goto include MV45AFZZ and to user exit Save_document This form is called before COMMITand double click on FORM USEREXIT_SAVE_DOCUMENT.
2.it will show the program MV45AF0B_BELEG_SICHERN from were this user exit is called, selcet the program and click on Display.
3. you can use the enhancement point enhancement-point beleg_sichern_01 spots es_sapmv45a. just below the PERFORM USEREXIT_SAVE_DOCUMENT to call the badi method on_costing_component.
regards.
santhosh reddy
Message was edited by:
        Santhosh Reddy
Message was edited by:
        Santhosh Reddy

Similar Messages

  • Number ranges for purchase order in SUS- why?

    Dear Gurus,
    In SPRO settings, I have seen the option for defining the number range for purchase order in supplier self service system. similarly, there is an option for defining the number range for purchase order response.
    Why do we need to define the number range for purchase order and its response in SUS system? In SUS system, the purchasing documents from SRM and MM system create corresponding Sales Order and its follow-on document. So, we need to define the number range for sales order not purchase order.
    In spro documents, it says you need to define the number range only if you create purchase order locally in SUS.
    What does it mean?
    regards,
    Ranjan

    Hi Ranjan,
    Unfortunately in SUS, Sales orders are referred to as Purchase orders only. Hence any PO with a number say 450000000 that comes into SUS will have a corresponding number in SUS as 19000000.
    Sam has already explained the PO response part.
    Regards,
    Nikhil

  • How to configure Alpha Numeric No range for the Material Type

    Dear Expert,
    i kindly request for expert help on alpha numeric no range for the Material Type.
    business is looking for material no like 910442208571D. at present we have no range like 9000000000000 to 9999999999999
    how i can configure in the system??
    pl. help me on this
    Thanks a lot
    H shah

    Hi,
    System will not bring alphanumeric number of materials automatically during MM01.
    Check use exit MGA00002 - Material Master (Industry): Number Assignment.
    Also check 2 Function Modules:
    EXIT_SAPLMG02_001 - Customer Exit: Internal Material Number Assignment
    EXIT_SAPLMG02_002 - Customer Exit: External Material Number Assignment.
    Regards,
    Biju K

  • How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

    How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

    Hi,
    First go thourh the FM import export parameters list.
    Try to create an internal table of type INRI-NRRANGENR for number ranges.
    We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
    Try to create the ncessary ones using this FM.
    In the Exit, EXIT_SAPMM06E_001,
    the Export parameters are-
    EKKO-EBELN- the PO ios created with in that specified range
    Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
    Try to code this in the Include provded and keep Breakpint and check the PO number generated.
    Reply if u need more help on this.
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • Plantwise separate number range for Production order

    Hello SAP Expert,
      I my project our client require plantwise number range for Production order,order Confirmation for indentifiction purpose .
       Please give way to do this.
    Thanks in advance.
    Regards,
    Yogesh.

    Hi,
    As per standard SAP not possible because Order types are maintain at Client level and not at Plant Level, but as Sukender said use Different Order Types for different Plants.But I guess user will face one problem often during Manual Production / Process Order Creation , and that is if they select wrong order type then face a problem like no Order type dependent Parameter set for required Plant.
    Regards,
    Dhaval

  • Alpha numeric no. range  for PERNR (Employee no.)

    HI,
    Any option for adding alpha numeric no. range  for PERNR (Employee no.)
    RX

    Better you can use Numeric only....
    see the sap help
    External intervals can only contain either letters or numbers, as sorting can differ between platforms (Code page):
    Allowed:  000001 to 999999
                   AAAAAA to ZZZZZZ
    Not allowed:  AAAAAA to 999999

  • External Alphanumeric Number Range for Internal Orders

    Hello,
    I am trying to create external number range for Internal Order Type. I want to create internal orders which will have internal order number as alphanumeric and some will be in only numbers.
    How should be the range look like, so that I have flexibility to enter Internal Order number as whatever format I want i.e. T123, 12MP, 1234, ABCD etc.
    Any help will be appreciated.
    Thanks.

    how many do you need?
    Just one, that covers all?
    a0000000 - zzzzzzzz

  • Number range for Production order

    Dear All SAP PP Gurus,
    I am new to SAP PP and want to learn about number ranges for production order.
    Can anyone tell me step by step procedure for creating & Assigning
    number range.
    Thanks in advance.
    Regards.

    Hi MIHIR,
    I just chkd the blog spot of MR Siva.
    It is very much self expalnatory.
    Siva ,pls update more documents in ur blog,it is very much helpful
    THNX all

  • Number Range for Transfer Order

    Hi,
    When I create transfer order with reference to outbound delivery, an error message says "Maintain number range 01 for transfer order". I could see the number range 01 maintained in T- code SDPI. But I would like to know how we maintain number ranges for transfer orders and why this error message has come?
    Thanks,
    Betty

    Hi
    In-img-logistics execution-shipping -pickinglean ware house management--define control paramaters and no ranges for lean warehouse management
    1.Here you will define the control parameters for lean warehouse ( no ranges too)
    2.Define no ranges
    3. Assign no ranges
    Please check have you maintained entries for your warehouse here if it is lean
    In img----logistics execution-warehouse management-master data--define no ranges
    T code OMLW if it is central warehouse
    Regards
    Raja

  • Number range for different order types

    hi
    pl tell me how to create the number ranges for production order s and how to assign this number ranges to different order types in production server.
    thanks and regards

    Dear ,
    Goto CO82 ,
    1.Frist you should review in the Overview Screen (Hit the Orview in CO82) wether you have option to create the group as per required number ranges for two order type
    2.Hit the Pencil Button of the Group : It will take you "Maintain Number Ranges Group" and Select Group on the top -
    Insert.It will pop up with Inser Group Window .Enter the Text , Enter Number Ranges (From no /To No) and then hot the insert button (+ sign) .You have to create two number ranges group as per your requirement
    3.Now select you order type and hit the Select Eelement (Nip symbol) , select the resepctive group , then Hit Element/Group Tab .Once you follow this steps , you will find your Oredr type assigned to respective number ranges group.
    4.To cross check , you select the number ranges group and hit the Spec button to see the correct number ranges .
    5.MAKE SURE THAT YOU HAVE ORDER TYPE CREATED BEFORE YOU CREATE THEIR NUMBER RANGES -OPJH
    Revery back if u need any help
    Regards
    JH

  • Number range for Maintenance Order (IW31) - Any exit

    Hi All,
    I need to go for internal number overwite for Maintenance Order (IW31)for object AUFTRAG .
    I am going to maintain ztable which contain order type and  NRRANGENR.So,based on the ordertype i have to populate  NRRANGENR in the exit.
    Can you please tell me any exit or badi or through enhancement spot we can apply number range for maintenance order.
    Thanks .
    With Regards,
    Ambrose

    Hi,
    Do you need an exit ?
    You could create number range groups each with a specific number range. Then assign each order type to a particular group depending on which number range you want it linked to. If necessary have a different group for each order type.
    Configuration can be done in transaction SNRO for object AUFTRAG.
    -Paul
    Moving to [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum (for PM/CS specific topics).

  • Number Range for production order / Planned order

    Number Range for production order / Planned order depends upon what?
    Plant, order type, mrp controller??

    Dear,
    Number Range for production order :- Client Specific assign to the order type You can check in CO82 and OPJH.
    Planned order  :- Plant specific OPPQ or OMI2.  Number ranges for Manual creation - OMI3
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Number Ranges for Service Order

    Hi All,
    I want to create no. range for service order.
    Generated no. should contain plant code as well.
    eg VSC00AA001
    here V is hardcoded
       SC00 is plant code &
      AA001 is no. generated from no. range.
    Pls. tel me how to proceed...
    bye,
    Pranjali

    This alpha-numeric format is not possible directly with SNRO settings.
    You need to opt for external number range, and in the exit of your respective transaction you need to takecare of this number generation explicitly by programming.
    Regds
    Manohar

  • Alpha Numeric Number range in billing

    Dear friends,
    We have a requirement related to number range determination in billing doument and the requirment is as below -
    a.  Number Range need to determine as alpha numeric
    b.  No External number ranges to use and always determine as internal
    c.  The codification for the number range is as below -
    1S59000001 - Codification for number range
    For your information, in our scenario billing is generated automatically through batch run.
    Than
    Best Regards,
    Goutham

    Hi,
    You cant maintain the INTERNAL NUMBER RANGE with Alphanumericals.
    For this you have to use the USER EXIT
    Try this user exit 
    USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ
    regards,
    santosh

  • Multiple number range for planned order

    Hi,
    I want maintain different number range for MRP related planned order and manual creation planned orders. I have checked OPPQ and OMI2 transaction but i could not get any clue to create different number range for same plant. Let me know is how we can create.
    Regards / US

    Hi Uma,
    number range is dependent on plant alone and I don't think there is an user exit or badi to change number range at planned order creation.
    I guess the alternative is an enhancement or using some other field to determine what planned orders are manual.
    regards,
    Edgar

Maybe you are looking for

  • How to change a password for an OpenLDAP user, which fails when using Lion's System Preferences?

    The Problem Users are unable to change their password using System Preferences -> Users & Groups on a Mac that is connected to an LDAP server (specifically, OpenLDAP). This error appears to be a result of OS X 10.7.4 now sending the username of the u

  • Message queuing with XML transfer

    Hi, I am currently working on a project which aims to transfer XML document from a client to a server side application. I plan to use HTTP as transport protocol and I would like to be sure that all messages sent are correctly received by the server s

  • Looping thru merge statement

    I have a merge statement, this executes for all the rows when the procedure is executed. Here i would like to include this merge statement as the part of LOOP so that all records will not get updated for a one time. how can i change this merge statem

  • Valid size file not available ...

    To solve your problems with the '' valid size file not available for this creation''  do this... Open Organizer (Elements 10). From the menu, select Edit, Preferences, and go to Adobe Partner Services. In the location section, click on "choose",  and

  • HT5655 Compatible flash downloads for I pad

    I cannot access all my details on national lotto website without downloading adobe flash wich is not compatible way is the alternative for an I pad 2?