Alpha Sorting of Universe and LOV in Webi Rich Client

We currently are using both Webi and Webi Rich Client XI3.1 SP4 in Webi the universes and the LOV sort Alpha Numeric automatically, however in the Rich Client the list of universes and the LOV are not sorting Alpha Numeric.  In designer we have all the universes with the Force_Sort_LOV set to yes
Any suggestions on how to resolve this issue would be appreciated

Have you tried dropping the associated universe LOV and re-publish? This happened to us in the past.
Steps:
1) In the univ designer object properties, deselect the "associate a LOV" in Properties tab. Close. Save. Export to CMS. (this drops the LOV)
2) Go back in univ designer and check the associated LOVs again to rebuild then republish to CMS.
Does this work?

Similar Messages

  • Webi rich client and Infoview difference

    I am quite new to BO. Plz tell me what is difference between webi Rich client and Webi (i.e infoview?)
    Thanks and regards.

    Ashok Babu
    Muiz: Already shared the thread, Diference Between Web Intelligence and Web Intelligence Rich Client?
    Why you copied it. Without any new info.
    WRC:
    >>Windows based
    >> Work Online Mode
    >> Offline Mode
    >> Universes
    >> Personal Data Providers
    WebI:
    >>Web Based(resides in Infoview Portal)
    >> Online mode only
    >> Universe only data source.
    I'm Back

  • Date Format is different in WebI Rich Client and Infoview

    Hi All,
    Iam facing problem with date format , but i need the date format as like dd-mm-yyyy.
    WEBI Rich Client is displaying the format  dd-mm-yyyy.
    but in infoview it is displaying like mm/dd/yyyy
    Can i have any solution for this ..
    Thanks
    Mahesh

    Hi
    Did you sort this out?
    I am new to BO reporting, and now encountering this issue as I start publishing WEBI reports via INFOVIEW on the portal.
    Cheers,
    Andrew

  • Which ports does Webi Rich CLient use to connect to Universe etc..

    Hello together,
    we have the problem that we cannot run Rich Client from computers outside our network - so which ports does webi Rich Client use to connect to BO Serverl?.
    It will always say universe not found. Login to rich client and everything else is possible.
    It's not an authorisations problem, inside the network people can run the programs fine.
    Thank you

    Hi,
    i assume you have enable CMS port on the firewall, apart from this you need to enable IFRS and Connection Server port also.
    Regards,
    Ramu.
    Edited by: Gowda Timma Ramu on Oct 14, 2010 4:06 PM

  • BO XI 3.1 SP3 SSO with CMC and Webi Rich Client

    Hello,
    Is it possible in BO XI 3.1 SP3 to use SSO with CMC and Webi Rich Client ?
    It works fine with InfoView, Designer and Desktop Intelligence.
    Regards

    Hi,
    What kind of SSO authentication are you trying to set up? (AD, LDAP,...)
    I think it's AD regarding your command line.
    But be aware that in SSO, you don't need to configure the command line to run the client.
    Have a look at the following guide.
    [Configuring Manual Kerberos Authentication and-or SSO in Distributed Environments with XI 3.1 SP3.pdf|https://bosap-support.wdf.sap.corp/sap/support/sapnotes/public/services/attachment.htm?iv_key=002007204200000183782010&iv_version=0005&alt=2BCE4CB10DF674B172F4F3F7B32A284F49333135358877720E883731B332AF34CACD2AB52C0A2C8DCACA09084EF4CB494E4E0F2ECE8E2F89772908C9CE70CD2DF77675F7F2D1750C09514BCECFCFCE4C8DCF4BCC4DB5F575F4F4F3F57771F571F6F70B01B25D83D4120B0A722092A599504EB16D715E3E00&iv_guid=DF838310BFAAE8F1B486001A64C54696]
    Regarding accessing CMC with SSO, it's not recomended at all as if you break this access, than you can't connect anymore to the CMC and modify settings.
    Regards,
    Philippe
    Edited by: Philippe Tavares on Feb 15, 2011 4:11 PM

  • Webi rich Client Drivers Issue

    Hi,
    I am facing errors when i try to run the query in WEBI Rich client whereas when I run these queries directly on the server I am not getting any error messages. Based on the error messages, I think I might need to install some drivers. Can anyone tell me the drivers that we need for Oracle & Microsoft?
    When i try to run a Query on the webi rich Client for the Universe that was connecting to oracle, i am getting the following error message:
    Below shown are the errors that I am facing with 2 universes which are connecting to SQL Server.
    1. When i try to run a query for the Universe that is built on Cube, I am getting the following error:
    2. When i try to run a query for the Universe that is built on Datamart, I am getting the following error:
    Please help me out here if anyone knows the solution.
    Thanks & Regards.

    Hi,
    short answer to your question : it depends on what your consuming.
    you need to find out the exact version of these sources (i.e. ORA 11.1? MSAS 2008 SP2? etc)
    then identify the middleware from that vendor which is supported by our SAP applications. For that, you need to cross-reference the 'product availability matrix ' (pam)  for your specific Service Pack of the BO BIPlatform . www.service.sap.com/pam
    then, you need to look at the connectivity of your universes to see which driver they are using (ODBC, JDBC or OLEDB for example)  and then  download the right file from the DB vendor's site. 
    then make sure that you install 32 bit MW on your client tools machine, and 64 bit on your server.
    You will then need to administer the ODBC data source names (DSN) everywhere .
    Good luck!
    regards,
    H

  • Webi Rich Client

    Hello,
    Can we access a universe that is on file server and run reports of it using webi rich client two tier ? If it is possible, how can we implement that?
    Thanks

    Hi Sumanta,
          Our requirement is to store a universe on any shared location and all the users can access this universe and build reports using webi Rich client two tier. We are trying implement this by following steps.
    There is an option in rich client to change the default universe location to save. When you login to Webi Rich Client and go to Tools-->Options, there you can give the shared location where the universe is saved. By doing this users can access the universe that is in shared drive, but all users must have a local ODBC connection to run the reports using Rich Client in Two tier.

  • Variable screen of webi rich client differs from one of Infoview

    Hello
    We are on BO XI 3.1 sp3, universe of the top of SAP BI 7.01 query.Webi version 12.3.0
    Char1 is set to delegated search.  Variable1 for char1 is mandatory, multiple single values on SAP BI side.
    Webi reports (executed from webi rich client) allows search by value for this char1. Webi report (executed from infoview) doesnt allow any search for char1.
    Button FIND (match case) looks inactive. It doesnt start search.
    I tried different combinations (see below) but it doesnt help.
    *XXX
    XXX
    XXX
    Does anybody know that cases the difference?
    Thanks

    Herr Kommandante
    Does it make a difference if you switch between HTML and JAVA viewers in Infoview?
    Does it make a difference if you switch between View and Modify modes in Infoview?
    Are you patched to the same level on both Client and Sercer?
    Regards,
    Henry

  • Web rich client -- report tabs missing in edit mode

    Hello,
    A report was created in web Rich client and then  was exported in the BO repository. In view mode, we
    see all tabs, but in edit mode,only two tabs are displayed.
    any idea please?
    Thanks a lot.

    hi,
    I also faced the same issue.
    I could replicate the issue suceessfully on a consistent basis.
    STEPS to replicate the issue
    1.     Create a new webi report using Island Resorts Marketing Universe
    2.     Query Panel Objects
    a.     Country, Resort, Service, Number of guests
    3.     Run query  (Tab 1 is created automatically)
    a.     Report 1 u2013 Table containing above objects
    4.     Right Click Report 1 - >Insert Report -> rename it to u2018Crosstabu2019
    5.     Move the report tab to Left such that Crosstab appears as first tab
    6.     Drag Crosstab from Templates.
    a.     Pull Country and Resort objects as rows to Crosstab
    b.     Pull Service as Column to Crosstab
    c.     Pull Number of guests as measure to Crosstab
    7.     Select Country -> Insert Break
    8.     Select Resort -> Insert Break
    9.     Select Resort First and Country Second -> Click on Merge Cells button
    10.     Select No
    11.     Now again click on Merge Cells button
    12.     Select Yes this time.
    13.     Save the report.
    14.     View the report from Infoview. You will see both tabs
    15.     Edit the report. (You cannot edit the second tab - Report 1. Edit the first tab u2018Crosstabu2019)
    16.     only one tab is visible. Other tab u2018Report 1u2019 is missing.
    Observations:
    Report Footer appears as the top section in Map -> Structure
    So my conclusion is when a reverse merge is applied on Crosstab with breaks, this issue occurs.
    But i don't know how to recover the tabs in Edit mode.
    Please let me know how to recover the missed tabs in Edit Mode. Also let me know the other scenarios which might lead to the same issue.
    Regards,
    Vamsee

  • Change the Default Page Size for WebI Rich Client 4.0

    Hi:
    I am trying to change the default paper size for Webi Rich Client 4.0. 
    In 3.x you made the changes to the defaultconfig.xml located in the path C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\classes\AppletConfig.
    In 4.0 I canu2019t seem to locate the file, can you advise if the file is the same name and where the file located.
    Thanks
    Brad

    Hi,
    Please check out the User Guide - see section Web Intelligence Cascading Style Sheets (CSS)
    http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_ia_en.pdf
    Regards
    H

  • Report Developed in Webi Rich Client Consuming more time in Data Retrieval

    Dear All,
    I am a BO Consultant, recently in my project I have developed one report in Webi Rich Client., at the time of development and subsequent days the report was working fine (taking Data Retrieval time less than 1 minute), but after some days its taking much time (increasing day by day and now its taking more than 11 minutes).
    Can anybody point out what could be the reason?????
    We are using,
    1. SAP BI 7.0
    2. SAP BO XI 3.1 Edge
    3. Webi Rich Client Version :12.3.0 and Build 601
    This report is made on a Multiprovider (Sales).
    What are the important points that should be considered so that we can improve the performance of Webi Reports????
    Waiting for a suitable solution.....................
    Regards,
    Arun Krishnan.G
    SAP BO Consultant
    Edited by: ArunKG on Oct 11, 2011 3:50 PM

    Hi,
    Please come back here with a copy/paste of the 2 MDX statements from the MDA.log to compare the good/bad runtimes.
    & the 2 equivalent DPCOMMANDS clauses (good and bad) from the WebI trace logs.
    Can u explain what u really mean in the bold text above..................Actually I didn't get you..........
    Pardon, I have only 3 months experience in BO.
    Regards,
    Arun
    Edited by: ArunKG on Oct 11, 2011 4:28 PM

  • Connection error in Webi Rich Client Bobj 4.1 sp1

    Hello Experts,
    I am getting an error while connecting Bobj server(4.1 sp2) through Webi rich client (4.1 Sp1).
    When i am trying to connect to CMC, i am able to connect it.
    Please help on this.
    Thanks in Advance
    Bhasin

    Hello Bhasin,
    I have few questions ans steps for you.
    1. Are you able to login into any other BO client tool?
    2. Do you have multiple Network Cards [NICs] on BO Server box?
    If YES, we need to prioritize it as below. Once donw bind primary IP with CMS. as mentioned below.
    Change Network Binding Order:
    Click Start, click Network, click Network and Sharing Center, and then click Change Adapter Settings.
    Press the ALT key, click Advanced, and then click Advanced Settings. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
    Click the Adapters and Bindings tab, and then, under Connections, click the connection you want to modify.
    Under Bindings for <connection name>, select the protocol that you want to move up or down in the list, click the up or down arrow button, and then click OK.
    Bind Primary IP with CMS:
    Log onto Central Management Console (CMC).
    Open Central Management Server (CMS) properties page, under
    Host Identifiers: change from Auto assign to IP Address
    Then input CMS server local IP address beside (IPv4).
    Do this for each CMS.
    Restart the CMS.
    Good Luck
    Regards,
    Mahesh

  • Webi Rich Client 2-tier Vs 3-tier?

    Could anyone explain what is 2-tier and 3-tier for Rich Client?
    Thank you

    When you login 3-tier will show a web app (j2ee or .net) in the system information, as it must connect to the connection server through the web/app. It will use the XI 3.x servers middleware connection for refreshing report data.
    If you launch it from infoview a file will be created on your local computer called something.extranet and this file will contain the web/app connection information for connecting.
    When using 2 tier connections will be made from the local computer, this requires middle ware to be set up on the workstation(s). Performance will be faster in 2-tier as a benefit. When using 2-tier only a CMS or clustername will be entered in the system.
    Regards,
    Tim

  • Query about  Webi Rich client Install through Infoview in XI 3.1

    When we Install Webi Rich client through Infoview on a client box ,It Install all language  packages .
    Is this a default behavior (So that we can log it in Enhancement request) or It is Potential bug with Product.
    If this is a default behavior ?Is there  a way we can Install only one package(Say English ).
    Edited by: Ovais Ali on Feb 2, 2009 9:32 PM

    When we Install Webi Rich client through Infoview on a client box  I didnt get this point why you install WebI rich cliet through Infoview?
    When you intially Start Igeneral BO3.1 Client nstallation It will show you the various languages the BO can be installed in among those by default it will be in English.Please select that or any other language you wish and go next  you will get your Installation done.

  • Bank row was added in webi rich client when using excel as data provider

    reproduding steps:
    1.open webi rich client.
    2.Create a new webi report,then select "local data source"
    3.select an excel file as data source.
    4.run query.
    For example,there are 5rows in excel,but in webi report there are 6 rows,and the last row is bank which is added by webi.
    question
    1. mcro has been defined in the excel file,is there any impact by using macro?
    2.I want to know why this happens,

    >could you please test the following solution if you have multiple data providers in the report.
    >We need to manually link the dimensions then in the resulting crosstab/table we are need to apply >filters and select only the values but not the #empty values.
    I have only one data provider in the report.
    And, I have do the following test,
    test1:Delete the last row which is blank row of the excel file,refresh webi report, the last blank row is still there.
    test2: press ALT+F8,delete marco in the excel file,refresh webi report, the last blank row is still there,then delete the last blank row in the excel file ,save excel file,refresh webi,the last blank row is disappear.

Maybe you are looking for