Alphabetical dial for name on company phone directory

I use à BB 8130 (Pearl) and when I need to reach someone's extention by dialing alphabetically is name in the company phone directory... I alway gets somebody else extention!!! have you ever get this issue to?
Now I understand why... And you'll see it's simple. When a cie directory ask you to dial the name of the person to reach, the system have some kind of cross reference of the Alpha keys of the normal phone system. By example, if you try to reach John Smith and the system ask you to dial in by the last name after the #, you'll certainly dial #7648 (S.M.I.T) right?
But on the BB8130 the keys are:
7 = C or V
6 =J or K

It's much much simpler. Honestly, you are thinking about it too hard.
While on the call, just press and hold the ALT key,  while spelling the name. The BlackBerry will translate the correct numbers.
For instance, you dial in the company, and you want John Smith. You press the ALT key on your BB device and TYPE S M I T H and release the ALT key.
Same with dialing a vanity phone number, like 1 800 FLOWERS. You dial 1 8 0 0 (press ALT) F L O W E R S 
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • How do I show more information for result set, I need company name, company address and company phone number to show. Now it is just company name and company address no telephone number, I need the number to show as well in the first result set

    The result set I get for a search now only shows the company name and address, if I want the telephone number of the company in the result set, I have to click on the link to go the site information to get the number. I want the company name, address and phone number to show up in the result set without having to click on each hyperlink to get the telephone number...

    ???
    See my profile at the left for information you are missing.
    Who, when, why, how, how much, what is the URL

  • Unity 7 dial by name directory handler question

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    Scenario:
    Our president is not set to be listed in the phone directory for Unity 7.
    Is there a way to tie his dial by name to an assistant. So instead of not coming up in dial by name, it’ll direct to his assistant instead?

    Have you tried putting in an alternate name on the assistant's subscriber entry in Unity?

  • How to get carrier company name on windows phone 8.1?

    how to get carrier company name on windows phone 8.1?

    excuse me, i referrer the link http://stackoverflow.com/questions/26973111/get-carrier-name-cellular-mobile-operator-name-using-windows-phone-8-1 to
    modify my universal app.
    but i always get 0 count from the GetNetworkNames() method. 
    if my sim card is for 3G, but i setting 4G in highest connection speed. i got the "the pipe is being closed".
    how can i solve the problem? thank you.

  • Windows Live Accounts for Company Phones?

    Hi all,
    I am hoping you can help.
    At the company I work for we are enrolling Windows Phones as the Business phone but to get our Mobile Device management Software on we need access to the Windows Store.
    I only need the Live accounts for the store. The users do not need individual Windows Live Accounts
    I was wondering what is the best way to sign up 20+ phones so they can get apps from the store?
    Any help would be appreciative
    Thanks in advance,
    Alex

    The Windows Phone Store does require a Microsoft Account(MSA) to download apps. This can be either the end user's MSA or a company issued MSA. All MSA's have a 5 device limit on Windows Phone. If you plan to create your own MSAs, note the following:
    Currently there is a limit that only 3 Microsoft Accounts can be created per day from the same IP Address.  You can request an exception by using the following form:
    https://support.live.com/eform.aspx?productKey=wlidipexc&ct=eformts&scrx=1
    To submit a whitelist a request please have the following information available:
    • Contact Name
    • Contact email address
    • Customer Name
    • Customer Company Name
    • Microsoft program the customer needs the exception for
    • Company Domain(s)
    • Public IP Address(es)
    Temporary whitelisting of an IP lasts for 30 days. Whitelisting requests should be within 30 days of the final day of the planned event, but not any sooner, to make sure the IPs in question remain whitelisted through the entirety
    of the event.

  • Need help on displaying the callers name on ip phone with cme using external directory

    Hello Guys,
    Need help on displaying the callers name on ip phone with cme while using external directory
    Thank you,
    Khaja

    Thanks for your help,
    Does it 100% work with CME. We use SIP and 2ring for external directory?  Thanks you.

  • How to maintain a history for Name of the Company

    Hi folks!
    A cliente have need to maintain a history of the Name of the Company (field T001-BUTXT) because they are intending to change the name of their company. It is needed to show the old name in reports until certain date. E.g.:
    08/30/08: until this date shows "XXXX" as the name of company in reports
    09/01/08: from this date shows "YYYY" as the name of company in reports
    As I could see T001 is not effective date driven. How could I manage the behaviour described above? Is there some legal requirement that impede it?
    Thanks a lot for your collaboration!
    Regards,
    Felipe

    Venkatesh,
    DFKKTAXEX
    FKKVK
    FKKVKP
    FKKVK_CORR
    I have never used these tables but I have working experience with change docs.
    The Z field which you have added should be in the above structures, then you should be able to see that field in the changes.
    Of course change document should be set to that field-data element.

  • Dialer remote-name - what is it for?

    Hello there,
    ISDN dial-up. One of Dialer's interfaces.
    I don't understand one thing - what "dialer remote-name remotename" is used for ?
    I understand that when router dials out for authentication it either uses its hostname or "ppp chap hostname HOSTNAME"
    So what does dialer remote-name stand for ? Is it like expected remote host name or what?
    Thanks,
    Alex

    Hi Alex,
    First of all see the follwoing link about PPP CHAP Authentication :
    http://www.cisco.com/en/US/tech/tk713/tk507/technologies_tech_note09186a00800b4131.shtml
    then see :
    http://www.cisco.com/warp/public/793/access_dial/ddr_dialer_profile.html#conf
    that's an example of DDR and CHAP authentication through BRI interfaces.
    be aware at CHAP authentication when two hosts are going to connect together, they should have same password at each side, it means password must be same on both routers.
    so when you define dialer remote-name at dialing out interface, it tells to router to use appropriate password to challenge to remote host, also at the remote router (dialing in), the dialer remote-name specify the dialer profile to use.
    Hope this helps.
    Regards,
    Mehrdad Arshad Rad

  • HT4528 For the second time in two weeks, my 4s has lost all my contact names. The phone numbers are still there, but every last name has disapeared. What is happening?

    For the second time in two weeks, my Iphone 4s has lost all my contact names. The phone numbers still remain without any of the names, What is causing this to happen?

    1.  I assume that that suggests that it is not normal for a browser window to respond with minimisation?  It is just weird when a window just disappears, no reason given (and since there is no obvious loss of internet it can take you by chance)
    2.  Good that you ask.  No, it hasn't.  I meant to say when I first posted.
    3.  Thanks, I gather that.  It is just that Mavericks is so different from what I am used to.  Sigh...
    4.  It has calmed down but there is absolutely no rhyme or reason to it.  Forgot to mention that I had my first ever crash of Final Cut Pro since I have been using it nearly daily for four years.  I even had Chrome crash on me in mid-upload (drat, drat, drat!).  I don't click or plough on- I stop, think and consider. Hence me posting.  Mavericks is just not as "smooth" as Snow Leopard to me.
    5.  Yes, I understand.  I just wish it would show me both instead of just the one with the "1". 
    Tell me about it!  It is impossible, I came here to answer via the link in the emailed notification, was already signed out and signed in and was returned to the front page.  Had to go back to my Mail, click the link again and this time, luckily, I was signed in.  In other words- the session is impossibly short and signing in doesn't return you to the browser window you were but rather returns you to the front.  Meh.

  • How to reverse ios 7, it a company phone and traveler lotus note does not support the ios7, I need to use the traveller lotus note for work

    My phone is company phone, and once I upgraded to IOS7, my traveler lotus note does not work anymore, I can not receive email on my iphone anymore, please help to suggest either to reverse back to IOS6 or how receive the company mail with traveller lotus note. Thank you.

    You cannot downgrade your iOS.

  • PC Dialer for CME

    Hi,
    We ha ve internaly developped an application in JTAPI to control phone connected to Call Unified Manager.
    We'd like to port this application to CME but it seems JTAPI is not supported on CME.
    One solution is to use TAPI but library are not for Java.
    Is there another way on CME to control a phone via PC ?
    The purpose is to transmit/receive call and lookup the corporate/customer directory for name association.
    Thanks for your answer

    If you'd just look for a way to dial.. there's always CiscoIPPhoneExecute with a Dial uri. However, for events I'm afraid you have no choice but to use the CME TSP.
    Perhaps ATAPI.NET will help.. writing something in C# when you know Java is considerably easier than having to resort to a native language. I have ATAPI.NET working for basic tasks on a CCM but I've never tried with a CME (and I'd do anything in my power to push for a CCM replacement rather than deal with the CME).

  • Phonebook / Phone directory solution investigation

    Hello,
    I'm currently trying to find a solution in the perspective of editing a professional phonebook (+50000 entries in total) wich deals with mixed visual ads and text entries {name addresses and phones}.
    My phone book key points are the following :
    1) 3 columns layout.
    Conditional master selection on a cyclic basis (to cycle trough 4 header and footer advertisement)
    2) Text entries are :
    Letter categorized (A|B|C|D|...for users pages, and pro categories on pro pages)
    Conditionally formatted : 3 styles for handling 3 different type of text entries (normal lines, textad->black lines, textad->redlines)
    plus handling of letter spacing in case the lenght of the entry is too long to fit the column.
    3) Graphics entries :
    12 differents graphics ads sizes to detect and import, Conditional Positionning/Anchoring of image blocks upon their size. 300dpi CMYK.
    4) and for sure phone book style header management (eg. aa-ac)
    5) At production time, I project to process data as chunks of 3000 entries at a time, thus representing 30pages or so.
    I want minimal hand job once the file automatically processed.
    As form what I read so far Indesign and counterperts plugins offer the possibility of automating it.
    What I want to know is to wich point ?
    Does someone in here did ever worked on something similar, would like to share toughts ?
    As I investigate further I'll post my experience in here.
    INVESTIGATION AREA WILL COVERS THE FOLLOWING:
    DATAMERGE
    I forgot about DataMerge wich seems too slow to perform huge amount of data.
    EMSOFTAWARE INDATA
    CACIDI
    My very best regards.
    Please also have a look at the electronic version of our phone directory we produced with our team : www.annuaireopt.pf

    ********EMSOFTWARE INDATA INVESTIGATION********
    I'm using the demo version of Indata 5.1.4.0 along with Indesign CS3 v5.0.4. Indata allows to easily build conditions and process data.
    My following prototype does not handle yet : Conditional master, header management, & letter spacing.
    Prototype :
    «fields nom, prenom, adresse, phone, cat, lgn, lgr, pix, pixsize
    «set pictureposition to framefit»«set picturefolders to .\images\»
    «if cat is not prev cat»«cat»«endif»
    «--different block style and anchoring applied according to the pics sizes»
    «if pixsize = 56x09--C2»«set filename of picture 1 to pix»«endif»
    «if pixsize = 56x15--C3»«set filename of picture 2 to pix»«endif»
    «if pixsize = 56x23--C4»«set filename of picture 3 to pix»«endif»
    «if pixsize = 56x30--C5»«set filename of picture 4 to pix»«endif»
    «if pixsize = 56x40--C6»«set filename of picture 5 to pix»«endif»
    «if pixsize = 56x85--C7»«set filename of picture 6 to pix»«endif»
    «if pixsize = 56x265--C8»«set filename of picture 7 to pix»«endif»
    «if pixsize = 180x85--L1»«set filename of picture 8 to pix»«endif»
    «if pixsize = 118x265--L2» «set filename of picture 9 to pix»«endif»
    «if pixsize = 180x130--L3»«set filename of picture 10 to pix»«endif»
    «if pixsize = 180x175--L4»«set filename of picture 11 to pix»«endif»
    «if pixsize = 180x265--CL»«set filename of picture 1 to pix»«endif»
    «if phone --if the phone exist then its not an image entry»
    «if lgn --lgn font style»«nom» «prenom»«if adresse is not empty»«adresse»«endif»......«phone»┐«endif»
    «if lgr --lgr font style»«nom» «prenom» «if adresse is not empty»«adresse»«endif»......«phone»┐«endif»
    «else --normal font style»«nom» «prenom» «if adresse is not empty»«adresse»«endif»......«phone»┐
    «endif»
    «else»┐«endif --if phone»
    With this little piece of "code" I'm already almost to it.
    Normal text entries, Texads and GraphicAds are processed nicely into my layout.
    The only thing is that I have to manage the biggest GraphicsAds (like full page) by hand because they do not fit when inserted in the middle of a page. And if I anchor the full page Ad to page border, the Ad overlaps all of the text that is before its entry point...This is also true for some of the smaller GraphicsAds but in general all the smaller GraphicsAds (anchored at entry point) wich will represent 75% of the total are quite nicely distributed.
    By the way, I found that Indesign itself seems to be quite limited when graphics are anchored inside of text blocks.
    It's abylity to flow the text around it seems to me too much limited...
    My problem is that sometimes image blocks overlaps either over text either over another image block(s) on the next column.
    The real problem is that the image blocks are inserted inside the text block as if it was a text entry, and thus the text entered before the entry point of the image block cannot flow under it...
    I guess the problem here is my Indesign layout. Or maybe just a limitation of Indesign...
    Either way I guess I'll have to position manually some of the elements once the static file is generated (thing I would like to avoid).
    Anybody : Any toughts on the subject ?

  • The new mobile phone directory

    I was watching the news program on tv where the idea of a Mobile phone directory was imminent. I was given the following to opt out
    08001386263 and all I get is the opening times of the 118 services. 
     I was also given the txt to send txt E and then 008800 the send, It comes back as a red X , 
    How can we opt out of the new scheme.

    I'm writing a simple web service to provide this in my last UC deployment. It will be a matter of weeks, and I'll publish it as freeware.
    If you can't wait for it, here's a simple explanation :
    You should create a web application (the server-side language it's on you) that returns to the client (ip phone) not HTML but the Cisco subset of XML (http://www.cisco.com/univercd/cc/td/doc/product/voice/vpdd/cdd/5_0/5_0_1/ipphsv/ip503ch2.htm)
    Your web app should ask on the first page the name of the contact to look for, make an ldap query, and then return the XML with the contact's data.
    Hope this helps,
    Alberto

  • Cisco Phone Directory - Max 32 DirectoryEntry object

    Cisco SPA525G
    3CX Ver 11 Windows 7 Pro IIS
    We are able to access the Corporate Phone directory from the Cisco phones. However, it lists only the first 32 phone contacts.
    Cisco documentations states:
    http://www.cisco.com/en/US/docs/voice_i ... #wp1033491
    "A single CiscoIPPhoneDirectory object can contain a maximum of 32 DirectoryEntry objects. If more than 32 entries must be returned, use multipleCiscoIPPhoneDirectory objects in subsequent HTTP requests."
    3CX only maintains one XML file for all contacts found in the 3CX system. Ours has over 50 contacts listed in the file.
    This explains why the Cisco phones successfully downloads only the first 32 objects found in the file and the rest are discarded.
    Possible Solution:
    Create a program which when run, reads and breaks the 3CX Corporate Directory XML file into a series of alternative XML files each containing only 32 objects each.
    This I understand…
    However, I am confused on how to implement Cisco’s method of “…subsequent HTTP requests."
    Based in the information below, I believe that somehow I am to add to the HTTP response a “HTTP Refresh Setting” with the time parameter = 0, and the URL path of the next XML file that should follow in the directory listing.
    Can some explain or point me to documentation on how to do this?
    Thanks,
    David
    http://docstore.mik.ua/univercd/cc/td/d ... .htm#25866
    HTTP Refresh Setting
    The HTTP headers sent with any page from an HTTP server can include a Refresh setting. This setting has two parameters: a time in seconds and a URL. These two parameters direct the recipient to wait the time given in the seconds parameter, then get the data pointed to by the URL.
    The Cisco IP Phone HTTP client properly supports this setting, which gives a great deal of power to service developers. It means that any XML object being displayed can be replaced with a new page after a fixed amount of time.
    Figure 8 shows a good example of how the refresh setting can be used. This sample page shows the user the current value of Cisco's stock. It first brings up a splash screen that displays the Yahoo logo. After a very short time, it displays the numeric Cisco stock parameters. Finally, it shows a graph of Cisco's intra-day stock performance. The display then repeatedly cycles between the final two views.
    Figure 8 Sample Refresh Display
    All of this can occur without user intervention, as the display automatically cycles if a timer parameter is specified. However, on any given screen, the user can force an immediate reload by pressing the Update soft key. Also, if a timer parameter of 0 was sent in the header, the page will never automatically reload. In that case, the display will only move to the next page when the Update soft key is pressed. If no refresh URL is specified, the current page will be reloaded.
    MIME Type and Other HTTP Headers
    Delivering pages with the proper MIME type and other formatting items is not difficult, but it requires moderately in-depth knowledge of your web server. The following code excerpt, written in JavaScript and used with Microsoft's IIS and ASP, sets these values in a few lines:
    <%@ Language=JavaScript %>
    <%
    Response.AddHeader( "Refresh",
    "3; url=http://services.cisco.com/s/q.asp");
    Response.ContentType = "text/xml";
    . Additional page content here
    %>
    Usually, you can set the MIME type for pages in any web server by simply performing an association to the .xml file extension. Your web server's documentation should explain how to accomplish this. This allows you to serve static pages without the need for writing script.
    If you want to deliver dynamic content using the other supported HTTP headers, you will need to understand how to generate the HTTP headers using the desired programming language and have CGI or script access on the target web server.
    Content Expiration Header Setting
    The expiration header can control what URLs are added to the phone's URL history. This is slightly different behavior than traditional web browsers but is implemented to perform the same function. Disable the back button functionality to avoid calling a URL twice.
    This functionality allows you to expire the content of any page that is sent to the phone. When a user presses the Exit soft key, they are taken back to the last URL that was not expired when it was loaded. This differs from traditional browsers by not considering the current freshness of the data but the freshness of the data when the URL was requested. This requires you to expire a page when it is first loaded and to not set a time and date in the future.
    The following example shows how to expire content on IIS using Active Server Page (ASP):
    <%@ Language=JavaScript %>
    <%
    Response.ContentType = "text/xml";
    Response.Expires = -1;
    %>
    The "Expires" property is the number of minutes to wait to expire the content. Setting this value to -1 subtracts 1 minute from the request time and returns a date and time that has already passed.
    DBPlus2
    New User
    Posts: 8
    Joined: Thu Apr 05, 2012 5:45 pm

    It seems you are asking in wrong forum. AFAIK, you are asking "how to add HTTP header to response generated by my own script". It depend on WWW server we are speaking of and language of script itself. If you will fail to found solution within documentation of the HTTP server and/or scripting language you are using, then the better place for your question is a forum related to such language and HTTP server.
    In meantime, you can try other solituin. The "Refresh: 0;..." header is required for correct function of SoftKey:Next which is displayed by default. But you can redefine the content of SoftKey area using your own key. Such configuration is part of DirectoryObject you sent to phone. See definition of SoftKey 3 in example bottom. It's not original SoftKey:Next that depend on Refresh header. It's my own custom soft-key named "Next" with exact URL defined as part of key definition (replace 'N' with number of next page). It doesn't depend on Refresh header in any way. You should consider such advice as "temporary workaround". You should discover how to send HTTP header 'Refresh'  from your script. Note, it's not possible to redefine one SoftKey only. If you wish to redefine a soft-key, then all soft-keys need's to be defined by you.
    ... followed by Title, Prompt,up to 32 ...
    Dial
    SoftKey:Dial
    1
    EditDial
    SoftKey:EditDial
    2
    Next
    https://an-url-to-your-server-and-script/test-Directory.asp?page=N
    3
    Cancel
    SoftKey:Cancel
    4
    Exit
    SoftKey:Exit
    5

  • Phone directory - mass text formating

    Hi,
    I had question concerning tabs and leaders and figured it out with the help of the forum but I am having trouble with some other things. Please share your thoughts on the following.
    My task:
    - I need to take a excel file (or csv) (see attached file) That has about 6,000 phone directory listing entries ( Name, Address, Phone number) and pull it into my document (Indesign) and format it exactly like the the old phone directory was done (see attached sample indesign file).
    - The white pages format is: Name+(2 spaces)+Address+(leader periods that expand or retract as needed)+Phone number
    - for the names and addresses that are to long for the first line I will need to kick the Address and phone number to the next line with a hanging indent I think it is called, at .0625 inches.
    - I am obviously trying not to have to put in spaces and returns for 6,000 entries. For the spaces maybe I can use some style with a en or em space or nested style?
    - I am wanting to format the type once, however Indesign would do that.
    - So how do I do this with Indesign or even some other inexpensive plugins. I understand if some of this cant be done in Indesign but just let me know what you think.
    Files attached: file size total 2.3mb
    - the excel file of phone listings
    - The Indesign file sample of about 7pages is extracted from the 178 page previous Phone directory. Disregard it being messy, cutting up the document made things shift but you will see how it is formated from pages 4-7. Disregard any notice for missing links to images.
    - fonts
    Thanks

    Kenneth C. Benson wrote:
    Your attachment is still queued, however, here are my thoughts.
    I'm guessing your Excel file has Name, Address, and Phone Number in three columns (or more). I would format each column with a unique code, like {1} for Name, {2} for Address, {3} for Phone Number. Save to CSV, import into ID. Now you've got something like:
    {1}Ken Benson, {2}129 Longview Dr.,, Chatham,, NY 12037, {3}(123) 456-7890
    Search for double commas (the "real" commas) and replace with another code, like {comma}. Search for single comma followed by space and delete them all. Search for {comma} and replace with a comma. Now you should have:
    {1}Ken Benson{2}129 Longview Dr., Chatham, NY 12037{3}(123) 456-7890
    Search for {2} and replace with an em space. Search for {3} and replace with a tab. Search for {1} and delete it.
    Swipe the whole thing and format with a style that applies a hanging indent and a right-aligned leader-dot tab.
    Done. Should take about 15 minutes.
    In reality, your Excel file probably has separate columns for Address1, Address2, Town, State, etc. Just put in unique number codes in every column and collapse them to spaces or commas, as appropriate, in Indesign.
    Ken
    PS: I have a feeling this is what Data Merge or XML is supposed to do. Haven't figured them out yet.
    I've notified the appropriate people that the file is still queued.
    Indeed Data Merge is useful for this kind of work (said without seeing the files), but you get a separate frame for each record, which can be a pain, so I'm not sure it's any easier. You need a script (I think Peter Kahrel wrote one) to thread the frames when you are done.
    To further complicate things, there are a number of problems reported in CS4's data merge which were not present in earlier releases, most having to do with empty fields in a record.
    Peter

Maybe you are looking for