AlphaBlend could not be located in the dynamic link library MSIMG32.dll

I'm trying to install the latest Flash Player 11. I have Windows 7 on my computer and it comes up with the error message
Procedure entry point AlphaBlend could not be located in the dynamic link library MSIMG32.dll
I've cleared the Activex filtering and turned off the firewall and it still comes up???

You may try the below steps and check if that helps.
> Run the Flash Player Uninstaller for Windows and remove flash player.
> Restart the machine.
> Download and Re-install Flash Player.
> Restart the browser and check.
You might also wanna check the below articles ::
Enabling Flash Player in Internet Explorer 9 : http://forums.adobe.com/thread/885448
ActiveX Filtering in Internet Explorer 9 : http://forums.adobe.com/thread/867968
Cheers!
Arpit

Similar Messages

  • What do I do when I try to open Fifrefox 4 & get the message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll?

    2 days ago, I got a message about upgrading to Firefox 4.0. I didn't do it immediately, due to lack of time. Later that day, I tried to open Firfox & got the message: Firefox can't start because xul.dll is missing. Reinstall the program to fix this. I tried several times to open Firefox & got the same result. I tried rebooting. Same result. So I opened Internet Explorer & went to the Firefox website & followed the instructions to download Firefox 4. After that, I used it last night & left my laptop hibernating last night, then continued to use it this morning. Then I closed Firefox. When I next tried to reopen Firefox, I got the new message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll. Again, I can only access the internet with Internet Explorer. Also, I have a done a good many Windows updates over the last 2 days as well. What can I do to get Firefox to open? Thank you for your help.

    This is what I did to resolve this problem. First, I uninstalled Firefox 4 & removed the Firefox folder left behind. I made sure to NOT select the option to delete personal information. Next, I backed up all of the important files on my computer. Next, I upgraded my Windows 7 to Service Pack 1, which was pending in my updates folder. Then, I went to Mozilla's website & downloaded Firefox 4 again, making sure to select only the Firefox browser and not Thunderbird too. http://www.mozilla.org/ When prompted to close any open programs, I closed Internet Explorer (which I had used to get to the Mozilla website) and I disabled my Norton anti-virus. I then completed the installation & it works just fine now. It loaded all of my personal data, such as bookmarks, it remembered my password, etc. It's fine for my needs, as I'm not a heavy user of special add-ons & plug-ins. Some of those may not work yet with the new version.

  • Help! I keep getting the following message: the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

    Hi,
    Since downloading the updated version of itunes around May this year I have had the following problems:
    1. This error message appears when my windows account launches:
    the procdure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
    2. I can't play any of the files in my itunes library. An error message appears indicating it can't find the files.
    3. When I plugged my iphone in to update it was corrupted and I have lost all 7000 + songs.
    You can guess that I am not a very happy bunny with itunes at the moment!
    Please, can anyone suggest how to sort this lot out.  I am aware that I've probably lost the ipod songs, but I need to get rid of the error message and be able to play the songs on from my library.  I've been without since May now and I'm wondering whether to even bother getting it sorted, but I have quite a few albums purchased on itunes that I don't want to lose!
    Thank you for your time.
    Michelle

    Thank you.  I'm going to investigate saving my itunes library to the icloud and then re-trying the Stellar Phoenix recovery now the error messages have gone.  If the Stellar doesn't work then I will try the advice in your link. I really appreicate the help you've given me - at least I have my itunes library back! I'm kind of resigned to re-loading my CDs back on - something to keep my busy in the winter months!
    I'll let you know how I get on, but it will probably be a few days.I'm not very technical so I have to wait for my husband to get in from work to help me with this side of things.  He's been busy working on the Olympics, so I he hasn't had much spare time for a while!
    Michelle

  • I can no longer start FF and am getting this error message in a pop up box: The procedure entry point XRE_FreeAppData could not be located in the dynamic link library xul.dll. How do I resolve?

    Please help

    Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

  • After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is su

    After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
    == This happened ==
    Every time Firefox opened
    == I installed a new version ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

    If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
    It is possible that some files got broken with the latest update.

  • While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

    While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

    I faced the same issue. This solved it for me: Troubleshooting issues with iTunes for Windows updates
    Hope this helps.

  • I am getting the following error message on reboot: The procedure entrypoint sqlite 3_wal_ checkpoint could not be located in the dynamic link library sqlite3.dll.

    What do I need to do to eliminate the following error message:
    The procedure entrypoint sqlite3_wal_checkpoint could not be located in the dynamic link library sqlite3.dll.
    I am currently running Firefox 6.0 on my laptop. Thanks.

    So for the people with similar problem as mine, please do the following. It cleared that error message right away so this must be the solution.
    1. Go to c:\program files (X86)\Common Files\Apple\Application Support
    2. Find SQlite3.dll in that folder, then right click it and choose Copy
    3. Go to c:\program files(X86)\Common Files\Apple\Mobile Device Support
    4. Paste SQlite3.dll in this folder
    5. Restart your Windows
    ps. use Program Files instead of Program Files(X86) folder if your computer does Not use 64bits. Mine does.

  • When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?

    When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • When I boot my computer i get a message that says The Procedure entry point_NSConcreteStackBlock could not be located in the dynamic link library CoreFoundation.dll.

    When I start up my laptop I get an error message that says 'The Procedure entry point_NSConcreteStackBlock could not be located in the dynamic link library CoreFoundation.dll. I have tried to uninstall itunes and all its files, I have tried to install safari, i have tried to repair Apple application support but still when I boot laptop, I get the message....I am at a loss as to what will cure this!

    You should have one copy of CoreFoundation.dll in C:\Program Files\Common Files\Apple Application Support or C:\Program Files (x68)\Common Files\Apple Application Support if this is a 64-bit Windows.
    The detailed file properties should be as shown.
    If the file you have is correct check to see if there is another copy in the main iTunes folder. If so delete it and see if that helps.
    Otherwise try uninstalling/deleting folders/reinstalling iTunes again. See Troubleshooting issues with iTunes for Windows updates for more details. Your issue looks a bit like it might be a variation of the issue in the first box.
    Also worth checking that you have uninstalled the MobileMe control panel and any third party software that might try to talk to iTunes.
    tt2

  • My problem is on my Windows PC.  I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I am told this is related to iTunes.  Any help?

    I use both a Mac and a PC.  My problem is on my Windows 7 PC.  I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I am told this is related to iTunes.  Any help out there?  Thanks

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found.  The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

    On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found.  The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
    I have to clear this everytime I boot up?

    With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?

  • Error messages - DDE Server Windows itunes.exe - Entry point Not found and iTunesHelper.exe - The procedure entry point asl_add_log_file could not be located in the dynamic link Library ASL.dll

    Hi
            I have tried to research these problems I am getting, but have not been able to resolve them.
    1st is the above DDE Server Windows iTunes.exe - entry point not found.
    This only occurs when I try to start iTunes.
    if I click ok , several times, iTunes will start but slowly.
    If at any time I have to reboot my computer I get
    iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
    if I click 3 times OK it goes away.
    To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
    Installing it but still get the same errors on reboot and trying to run iTunes
    Anyone any ideas please.
    I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
    Ram 4.00GB
    32bit OS
    Windows 7 Ultimate SP1
    Firewall - Zonealarm
    Virus   -  Zonealarm
    Thanks in advance
    Steve
    Message was edited by: Ybslik
    Message was edited by: Ybslik

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

    Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
    re-install Itunes and what version??

    Refer to this thread - https://discussions.apple.com/message/15685210#15685210
    Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

  • When I turn on my computer,an error message says  "AppleSyncNotifier.exe-entry point not found The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll". Can't access itunes store,sync,buy etc. Help...

    When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll"  Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "libxml2.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "libxml2.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. Any thoughts?

    I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
    Any thoughts?

    Found this fix here which worked for me with a similar problem.
    https://discussions.apple.com/thread/3196594?start=0&tstart=0
    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well.

Maybe you are looking for