Alphanumeric number range for object QMERKRUECK
Hi all
I have raised a question on number range object QMERKRUECK few days back.
Internal number assignment for object QMERKRUECK (numbers are in critical area)
With reference to the same please let me clear, if it is possible to create alpha numeric number range for the same object.
I tried in SNRO but system does not allow for this.Next is , if any userexits are there to achieve this.
I know, this issue is hardly seen in any implementation but if anybody has gone through this and got a proper solution, please share your experience.
Regards
D Mohanty
Hello,
You can define number range for Purchase requistions in OMH7 transaction agaist each number range number and you assign can assign these number range number to your purchase requistion document types in SPRP >> Materials management >> Purchasing >> Purchase requistion >>Define doucment type.
E.g for NB doc type number range number is 20
and in OMH7 number range number 20 has interval from- 2000000000 to 2099999999
same way
for RV doc type number range number is 21
and in OMH7 number range number 21 has interval from- 2100000000 to 2199999999
Regards,
Shailesh
Similar Messages
-
Internal Number Assignment for Object QMERKRUECK
Hi Gurus,
When I clicked on SMPL( sample calculation) in the Sample tab of the Inspection plan (QA02) I got the below Information error " Internal Number Assignment for Object QMERKRUECK (Numbers are in critical area).
Though we have enough number range why this Information error is coming? Couold you please explain the cause and how to avoid it?
Thanks in advance,
ShashidharHi Shashidar,
Actually its gap
Reason: some times number ranges overlap or missing from the buffer data base system will happen very rarely.
in our QM module, below objects error chances may happen
- QLOSE (Inspection lots in QM)
- QMEL_NR (Number range - message)
- QMERK (Confirmation number)
- QMERKMALE (Master inspection characteristics in QSS)
- QMERKRUECK (Confirmation number of an inspection characteristic in QM results processing)
- QMETHODEN (Inspection methods in QM)
- ROUTING_Q (Number ranges for inspection plans)
- QCONTROLCH (Quality control chart)
Read Notes 504875 and 678501.
Thanks
Shiva -
Excise Number Range for Object J_1IEXCLOC
Dear All ,
I am having one issue regarding excise number range for object J_1IEXCLOC and sales group : 41 Domestic. i have already maintained number range for 2009 is 0000000001 to 0000000300. Now the range is exceed and the new excise invoice is created with number 0000000001. Now i am confused if i will maintain range upto 0000000500 for 2009 then what will be the new invoice number, whether it will be 0000000002 or 0000000301.
Pls. Give me some suggestion, What should i do now for the number range to be in continuation.
Regards,
Swapnil Vaidya>
swapnil vaidya wrote:
> Dear All ,
>
> I am having one issue regarding excise number range for object J_1IEXCLOC and sales group : 41 Domestic. i have already maintained number range for 2009 is 0000000001 to 0000000300. Now the range is exceed and the new excise invoice is created with number 0000000001. Now i am confused if i will maintain range upto 0000000500 for 2009 then what will be the new invoice number, whether it will be 0000000002 or 0000000301.
>
> Pls. Give me some suggestion, What should i do now for the number range to be in continuation.
>
> Regards,
>
> Swapnil Vaidya
It will be 2 and not 301. This is a flaw with CIN. All transactions take place by means of internal numbers and are stored in CIN transaction tables. Hence when the range gets exhausted, the number gets reset to the beginning, yet there is no error because internal number, which is the primary key, is different.
To solve your problem. Go to SNRO and provide the object J_1IEXCLOC and click on status. Change the status to 300 and continue with your transaction.
Regards,
Aroop
PS: Your question is more relevant for SD than MM. -
Error: Number range for object RESB does not exist
Hi
I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
Many thanks
BE
Error Msg Text:
Number range for object RESB does not exist
Message no. 61501
Diagnosis
The system cannot create a document for an MRP element if no number
range or interval has been maintained in Customizing of MRP or if t
number range you have maintained is not allowed.
Below is a list of MRP elements that are affected:
Number range object MRP element
PLAF planned order (operative oder simulative)
EBAN purchase requisition
RESB dependent requirements
MDSM simulative dependent reqmts (long-term plannin
MDTB MRP list
Procedure
Check the number ranges in Customizing. If you do not have the necessa
authorization, please get in touch with your systems administration.Hi
Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
NR Object MRES/DREQ
No. From Number To Number Curr Number Ext
01 0000000001 8999999999 380 blank
02 9000000000 9500000000 blank checked
RB 9500000001 9999999999 blank checked
Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
thanks
BE
Edited by: Brian Elfie on Jan 10, 2008 11:27 AM -
Number range for object MDTB does not exist - Message no. 61501
Hi All ,
I have done the necessary configurations in PP say
Order Type
Order Type Dependent Parameters
Scheduling parameters for planned & production order
Confirmation parameters
Availabilty check etc
and iam able to create planned & production order and confirma the production order.
I want to configure for MRP: -
Settings done are
Have activeted planning file entry for all plants.
When i run MRP system throws a error <b>Number range for object MDTB does not exist - Message no.61501 </b>
Is there anything to do with plant parameters OPPQ and Mrp Group OPPR.
I just tried plant parameters,standard 0001 is not available for copying.
Suggest me how to proceed to set MRP.
ShankarHi shankar
it is a good practice while creating the plant copying the plant from the standard plant so that all the standard table enteries will be copied for the plant as the standard plant is not there youcan think of copying from any other plant similar to your plant which has the required entry. else
in SE16N check the NRIV table for the Object MDTB. if enteris found then make the table entry with the help of abaper.
hope this helps
regards
SK -
Number range for object BANF does not exist
Hi Guru's
I have been trying to convert the Planned orders to Purchase requisition and unfortunately the system consistantly giving me the error as reflected below despite changing the numbering range on the affectred documents. Please help.
Number range for object BANF does not exist
Message no. 61501
Diagnosis
The system cannot create a document for an MRP element if no number range or interval has been maintained in Customizing of MRP or if the number range you have maintained is not allowed.
Below is a list of MRP elements that are affected:
Number range object MRP element
PLAF planned order (operative oder simulative)
EBAN purchase requisition
RESB dependent requirements
MDSM simulative dependent reqmts (long-term planning)
MDTB MRP listHello,
You can define number range for Purchase requistions in OMH7 transaction agaist each number range number and you assign can assign these number range number to your purchase requistion document types in SPRP >> Materials management >> Purchasing >> Purchase requistion >>Define doucment type.
E.g for NB doc type number range number is 20
and in OMH7 number range number 20 has interval from- 2000000000 to 2099999999
same way
for RV doc type number range number is 21
and in OMH7 number range number 21 has interval from- 2100000000 to 2199999999
Regards,
Shailesh -
"Alphanumeric" number ranges for material matser
Hi all,
What are the sequence of steps needed to create "Alphanumeric" number ranges for material matser. Can anyone explain me the steps.
ThanksHi,
To add to what Sridhar has said ....we have got 2 number ranges only...
either internal or extenal.....
Better idea is to have internal only untill or unless it is at all required so.
It all depends on material type....
In internal it is more easy to maintain the ranges....but in case of extenal....lot more precaution is required.
Award if any thing answer you query .
Thanks
Dipak -
External Alphanumeric Number Range for Internal Orders
Hello,
I am trying to create external number range for Internal Order Type. I want to create internal orders which will have internal order number as alphanumeric and some will be in only numbers.
How should be the range look like, so that I have flexibility to enter Internal Order number as whatever format I want i.e. T123, 12MP, 1234, ABCD etc.
Any help will be appreciated.
Thanks.how many do you need?
Just one, that covers all?
a0000000 - zzzzzzzz -
External Alphanumeric Number range for order
Hi ,
My requirement is to create an external number range for one PM order type where
first 8 places from left can be alphanumeric and next 4 places should be numeric only .
like EQ12341H0112
here last numeric characters(in bold) actually will specify month and year in format MMYY (0112 means jan2012) . So I doesn't want system to accept last four characters as 1312 or 0012 also (because month should be in range 01 to 12 only)
How I can achieve the same.What number range i should define for external entry .
Regards
PM
Edited by: PM_SAP87 on Jan 18, 2012 11:41 AMHi,
You will not be able to achieve this specific logic by just defining a number range. What you can do is define an external number range that is alphanumeric and use exit IWO10017 to format and validate user entry.
-Paul -
Number range for Object (Organizational unit, Job, Position)
Hi all,
How to maintain number range for Organizational unit or Job or Position by Company Code or PA, EG, ...?
Thanks,
QuangHi,
For organizational objects maintain number ranges via OONR.
e.g. In order to maintain number range for C - Job object in plan version 01 add the following line to OONR:
01C IN EX
Then select this line and hit "Number range maintenance"
There create the interval you want.
(EX 60000000 69999999)
For PA, EG there is no number range maintained.
Regards,
Dilek
Edited by: Dilek Ersoz Adak on Jan 14, 2010 8:08 AM -
Alphanumeric Number Range For Serial Number
Hi Friends
How can i use alpha-numeric number range for serial numbers.I am using serial number profile For GR Process
Regards
VivekHi,
You may check link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/3c/abc157413911d1893d0000e8323c4f/frameset.htm
Ramesh -
Alphanumeric number range for employees
Dear Experts,
I have a question, can any one clearify it?
Can we maintain number range intervals for employee s with an alpha numerical value? if yes, how?
Thanks in advance
Namratano we cannot
we will have problems in maintaing there personal data
and if i always not recommended
sikindar
Re: Alpha numeric personal numbers
Edited by: Sikindar on Dec 27, 2007 9:48 PM -
Number range for object AUFTRAG
Hello,
we have in number range group Ztest but fot this group there is number range number missing.
Problem is when i click on ztest group and go to Interval maintain it does not allow me to put the new number range.
I dont want to deleted the exsisting Ztest group and redifne it.
Regards,Hi Yusuf,
You have posted this under SAP Community Network Forums » SAP NetWeaver » SAP NetWeaver Platform .
Please post it under ABAP General. You will get more answers there.
Also, please have a look at Note 52390 - Transport of number ranges with group.
Regards
Prasenjit -
Creation of Unique Number Ranges for Organizational Objects
Hi Gurus,
As per our client's requirements, We need to create unique number ranges for Organizational Objects such as O,S,P to distinguish based on the Object ID. Could you please help me out to create the same.
And also to create unique number ranges for Personnel Development Objects such as QK & Q.
Thanks in Advance
Regards
Vinoth Kumar.RHi,
To maintain object specific number ranges, go to customising node Personnel management --> Org. management --> Basic settings --> Number range manitenance --> Maintain Number ranges
Here there will already be a default entry as $$$$.
To create different range for object say O you can use the following options:
Create entry as $$O - number range applicable to all Org units across all plan versions.
Create entry as 01O - number range applicable to all Org units under plan version "01"
Then under Interval maintenance create the desired number ranges under IN for internal or EX for external (check the external tick box for external number ranges)
In the similar manner you can create the number ranges for objects C, S , Q & QK.
Hope this is helpful.
Regards,
Shreyasi. -
How to create Alphanumeric Number Range
Hello Experts ,
I want to create a alphanumeric number range for vendor .
Could you please give some information on the the format to specify in Number range transaction ?
For Example :
How do I create CDPDM01DKK vendor
Regards
ShashankHI
create number ranges in XKN1.
define A to ZZZZZZZZZ and click the the ecternal number range
Then
Assign the number range to vendor account groups.
Check it out.
Path: SPRO- SAP IMG- Financial accounting- Accounts receivables and payables- vendor accounts- master data - preparations of creating vendor master data - create number range for vendor accounts
SPRO- SAP IMG- Financial accounting- Accounts receivables and payables- vendor accounts- master data - preparations of creating vendor master data - Assign the number range to vendor account groups
Check it out.
Regards,
Raman
Maybe you are looking for
-
How to email photos to your mobile me account from a computer eye-fi card
For use with Eye-Fi SD Camera Cards! Set up your eye-fi account first and check it by uploading a photo or two to see that is working. Set your preferences according to your card capabilities. Ie. Upload to computer via folder or iphoto. Upload to ph
-
Unable to edit certain fields in order type RE comparing with OR
Dear friend, When I am creating return order with order type 'RE', I find out there are certain fields that are not editable. However, this issue doesnt happen with standard order(order type 'OR'). please refer to the following snapshot: where you ca
-
Zoom no longer works with Cintiq touch ring in Flash CC
When working in Flash, I always use the touch ring on my cintiq to zoom in and out, it's second nature. This funstion worked perfectly fine in Flash CS6 but does not work at all in CC. Having to always use hot keys and tapping on the screen to zoom i
-
Dear all, Is there a way to set height of the header of CFGrid? I know the "Height" property is to set the height of the grid and "rowHeight" is to set the height of the row. How about the height of the Header? Is there a site (beside asfusion) where
-
Why the click sound is not working after publishing?
Hello all. I have around 190-200 slides in my project. I want my mouse object to have the click sound in some slides and without click sound in rest of the slides. Using its properties panel I have added click sound for the required slides. But after