Already bought quicktime pro but still running without the pro options

Hello.
I have already bought quicktime pro but after I had to reinstall it is running again without the pro options. I logged into apple.com and there is nowhere where I can find my actualisation or key code which I have paid for to make it run as pro.
Does anyone know where to find it or how to fix this problem so it runs as pro again without having to pay for it again?
Thank you for your help,
kind regards
fybs

If you've lost the email Apple sent you containing the Pro key, log into your account in the Apple Store and click on the Downloadable Software Purchases link. You should find the key shown there.
Regards.

Similar Messages

6602-Can LabVIEW still run without the board having any input signals(in a simulation mode)??

wheeler

Wheeler,
The 6602 can physically run without any thing wired up, but it will not be "simulation" mode. Basically, you can use the internal timebase as a source or gate. For example if you are doing simple event counting, you can count the edges of the internal timebase. If you are doing pulse width measurement, or period measurement you can measure the internal 100kHz timebase. You will also be able to run the pulse train generation programs with the default setting of the internal timebase as the source.
The real answer to your question is that you do not need inputs wired up, but you do need to measure a signal (internal timebase) to get valid readings. So you can not do true simulation mode, but you can still program and test your program without your
intended input signals.

PLS HELP... I Already reformat my my macbook pro but still running slow

EtreCheck version: 1.9.15 (52)
Report generated September 17, 2014 at 8:08:36 AM GMT+4
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 6:25:48
Disk Information: ?
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (306.21 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ?
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
Default Browser: Version: 537 - SDK 10.9
QuickTime Plugin: Version: 7.7.3
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
None
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
      3% WindowServer
      2% Safari
      1% com.apple.WebKit.Networking
      0% pacemaker
      0% launchservicesd
Top Processes by Memory: ?
143 MB softwareupdated
123 MB com.apple.IconServicesAgent
98 MB mds_stores
70 MB sandboxd
70 MB Safari
Virtual Memory Information: ?
1.02 GB Free RAM
1.55 GB Active RAM
459 MB Inactive RAM
999 MB Wired RAM
1.73 GB Page-ins
21 MB Page-outs

Try using another video player such as VLC and see if you can get better results. There are a load of different things that can bog down your computer when watching video and, as far as I'm concerned, QT is not the best app around for watching video.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Hi all. I have upgraded to 10.6.8 Snow Leopard on my Mac Pro but still cannot connect to App store to upgrade to Mountain Lion. Any advice?

Hi all, I have upgraded to 10.6.8 Snow leopard on my Mac Pro but still cannot connect to App store. I want to connect to upgrade to Mountain Lion but ony get the message "you are not connected to App store" or "Check your internet connections, error -52". My internet is working OK for everything else.Any advice?

Then I will have to assume a faulty installation.
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Mac OS X 10.6.8 Update Combo v1.1.

Bridge does not shows file info, just thumbnails, what's going on? already adjusted in preferences, but still only thumbnails and not the info of the file

Bridge 8.5 does not shows file info, already adjusted in preferences but still just showing thumbnails only.
Can anyone please help?
Thanks

The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
What you are doing to sync them should work i.e.
- connecting the iPad to your Mac
- selecting the iPad on your Mac's iTunes
- selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
And do a soft-reset and retry syncing.
I assume that music and other items sync ok ?

Battery indicator @ 0%, but still runs

I've had my macbook for about 2-3 years now. I have noticed the battery performance getting worse with time, but lately it has gone way down! after fully charging, the batter will show only about 20-30minutes of time, within about 3 minutes will drop to 90 percent and continue to degrade rapidly. So yesterday I decided to just let the battery die before plugging it in. Once the indicator read 0%, it continued to run (not plugged in) for about 1 hour while playing music and internet surfing and could've gone longer, but I had to leave the house. So I powered it down, and didn't plug it in. When I got back, it was completely dead, and wouldn't turn on without the adapter plugged in. So I plugged in, turned it on, and it still was reading 0% and it started charging. When I unplugged it, it went into sleep mode and wouldn't wake up until plugged back in. Even after it had been charging for 20 minutes, it still wouldn't run without the adapter.
Sorry for being so lengthy, but I hope someone out there can help!

Hello,
I have the same problem
Here are the :
Battery Information:
Model Information:
Serial Number: XXXX-YYYY-0-0
Charge Information:
Charge remaining (mAh): 0
Fully charged: No
Charging: No
Full charge capacity (mAh): 0
Health Information:
Cycle count: 0
Battery Installed: No
Amperage (mA): 0
Voltage (mV): 0
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 1
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: No
My mac don't recognized the battery(no batteries available) ... But i run my mac on battery about 1,5 H...
What it is the problem ??? Can you help me?
Thank you in advance.

My MacBook Pro is still running the OS X 10.5.8, can I install the Mavericks directly? Or could you advise which latest system is able to be installed for my notebook?

Hello, my MacBook Pro is still running the OS X 10.5.8, can I install the Mavericks directly? Or could you advise which latest system is able to be installed for my notebook?

First up, we don't know what kind of MacBook you have so we can't tell you what OS you can run. You can use this instruction to identify which MacBook model you have: http://support.apple.com/kb/ht1635. Alternatively, from the Apple menu open "About this Mac". From the window that pops up, click "More Info". This will open the system profiler. Click "Hardware" and locate the model identifier, there.
Next, you need to determine if your system can even run Mavericks before you can go about installing it. These are the requirements:
To install Mavericks, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory
8 GB or more of available space
Lastly, as you'll note from the above, you can't update to Mavericks (or Mountain Lion or Lion) from 10.5.8. Mavericks is only available in the App Store. You need to be running Snow Leopard (10.6.8) in order to download and install any OS from Lion (10.7) and up. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

HT1430 th screen on my ipod touch went all white and I already tried restarting it but still doesnt work

the screen for my ipod touch went all white and I already tried to restarted but still doesnt work. What can i do?

Let the battery drain dead, recharge it and test. If it still does not work, restore.
Troubleshooting 101
Some topics covered
-Basic troubleshooting steps
-Hard reset instructions
-Manual restore instructions
-Hardware troubleshooting
-Preventive Maintenance
-Anti-theft & recovery tips
-Battery-saving tips
-Repair options
-Contacting Apple
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Just bought a Mac but music on my MacBook Pro, iPhone and iPad which all sync together is not coming up on the new Mac - help please

ust bought a Mac but music on my MacBook Pro, iPhone and iPad which all sync together is not coming up on the new Mac. I think I have turned on iCloud but still nothing.

It does not magically appear, unless iTunesMatch is turned on.
Copy the media (the ENTIRE iTunes folder) from the old computer to the new computer

HT1420 I already authorize my computer but still it cannot sync.

I already authorize my computer but still it cannot sync

Try:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

I already authorize my computer but still it cannot sync my apps purchases because it says to authorize my computer all over again

i already authorize my computer but still it cannot sync my apps purchases because it says to authorize my computer all over again

Try:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

I installed iWork11 but the '09 versions of the software are still running--and the default. What do I need to do to get the '11 versions working?

I installed iWork11 but the '09 versions of the software are still running--and the default. What do I need to do to get the '11 versions working?

It's very simple. If you want to use iPhoto, just let it manage things as it does. Other than that: Export from iPhoto and delete the image from iPhoto. That will remove the master and all versions.
If space is an issue... use an external disk.
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
Regards
TD

Battery not availble BUT still running off battery!?!

So yesterday, my MacBook decided to not show up... what? Randomly, out of the blue! It had previously been working just fine, about 80% health, and then, all of a sudden, it stops recognizing that there's a battery installed. Here's the funny part, though... The battery still has a charge (as shown by LEDs on the bottom), and the MacBook still runs off the battery, despite it saying it doesn't have one! Unsurprisingly, the battery doesn't charge either.
The computer will only start up if plugged in, but can subsequently be unplugged to run on the remaining battery power.
It seems the problem here isn't the capacity of the battery, but the communication between the battery and the computer.
I've tried resetting the SMC and cleaning the contacts of the battery, but neither of those had any effects.
Do I have any recourse besides trying/buying a new battery?

I have the same exact problem...totally out of the blue. You definitely don't need a new battery because my problem started couple of days after I purchased a brand new battery.
I think it might be the battery connector to the logic board. In almost all other cases with this problem, when the battery isn't recognized by the mac, then you have two of the following: it doesn't charge AND the computer doesn't run off the battery alone, even if the battery indicates that it still has juice left.
Unless instructed otherwise, I'm going to open up the computer and re-connect and clean the battery connector.
Also, do you have the updated battery software?

I have bought adobe cloud but still can't use photoshop. What to do?

I have bought adobe cloud but still cannot use photoshop. what to do?

What happens when you start Photoshop?
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

My iMac 27inch screen keeps going black but everything is still running in the background? please help

My iMac 27inch screen keeps going black but everything is still running in the background? please help. I have read that apple are recalling 27inch iMacs....

Hello @DesCherryBomb,
I understand that you are having issues with your HP 2310m monitor going blank and/or flickering. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Already bought quicktime pro but still running without the pro options

Similar Messages

Maybe you are looking for