Already burned dvd, wondering why is needs to redo menus, etc next time

This may be a dumb question but wondering, I already burned a movie to dvd and then closed the program, is there a way to burn a copy of the same movie without having to wait for the menus, audio, etc. to encode. If it already did it once wouldn't all that be saved somewhere.

Lab Lover, I have just had to burn 10 (ten) copies of the DVD of my son's wedding, for sundry family and extended family members. I can now recite all the speaches word-perfect.
I was unaware of the risks to the burner mentioned by Sue thanks Sue), so I am glad that I burnt them all from a disk image (using Toast), two at a time, with a few hours in between to get other stuff done.
They all worked perfectly. Burned at 2x, using Verbatim (until I ran out of stock) and Fuji 8x DVD-R.
Just my worth

Similar Messages

How should I do if I paid monthly payment twice for a month. One is by Auto payment and the other is by hand... Is it possible to get refund? don't I need to pay for it next time?

How should I do if I paid monthly payment twice for a month. One is by Auto payment and the other is by hand... Is it possible to get refund? don't I need to pay for it next time?

I know a couple others that waited for two billing cycles but it will come back as a credit on that account.

Burn DVD in iDVD. Need help please.

I've tried transfering or publishing my video from imove to idvd in order to burn onto disc. However, the disc burn "circle" won't allow me. I looked at older posts and unfortunately I'm not finding them helpful. Can someone assist me please?
Thank you!

Hi
You need to tell much more to set us on track.
Movie from where and in what Video Codec
Imported into iDVD - How ?
Most common situation:
• If You made Your movie in iMovie'11
• Select it
• Share to Media Browser - AND AS LARGE or MEDIUM (HD and other resolutions will decrease the final DVD quality)
• in iDVD (You are sure You got it - as it's not delivered on NEW Macs any more)
• Import movie from Media Button (doen to the Right) and here from Movies
DO Not forget to set down BURN SPEED to x2 or x4 - to get best possibly DVD (in iDVD pref/Advance bottom - BEST is NOT BEST !)
• I use Verbatim
• I use DVD-R (as they play on older DVD-players too)
Yours Bengt W

Extract Clips from already burned DVD?

My mom is sending me a DVD that she has just created from a VHS tape. I would love to add some clips from that DVD into the project that I am making now in iMovie. Any idea how I can extract maybe 10-20 second clips at a time from this DVD and bring it in to my project? I have about 45GB of space available on my hard drive, and I am running Mac OS 10.3.9. Thank you!

a forum Search would bring up the usual reply..
DVDs are in a socalled delivery format (mpeg2), which isn't meant and made for any processing as editing...
for using the iLife apps, you have to convert'em first, in recommended order, choose one of the following tools/workarounds:
DVDxDV (free trial, 25$, Pro: 90$)
Apple mpeg2 plugin (19$) + Streamclip (free)
VisualHub (23.32$)
Drop2DV (free, requires installation of ffmpeg parts, google for it...)
Cinematize >60$
Mpeg2Works >25$ + Apple plug-in
Toast 6/7/8 allows converting to dv/insert dvd, hit apple-k
connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
http://karsten.schluter.googlepages.com/convertdvdstodvs
none of these methods or tools override copy protection/DRM mechanisms.. advice on 'ripping' is a violation of the ToU of this board ..
be nice to copy rights ...

Import off an already burned DVD?

Good Morning.
I am asking the board for help before I give up hope.
I got a call from someone I did an imovie project for about a year ago. I recently deleted her job off my computer to make room. Is there any software (and how pricey is it?) that would let me re-import it from a DVD into iMovie and let me add pictures to it?
Thanks for your help.
Kindly, Macbeth

How do you do that?
By converting the DVD files to something iMovie can use...:)
Using Mpeg (DVD) footage
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
some helpful tools:
MPEG StreamClip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
Apple MPEG2 PlayBack Component:
http://www.apple.com/quicktime/mpeg2/
DVDxDV
http://www.dvdxdv.com/
Sue

I can't burn dvd with os x mountain lion it crash all the time

no dvd burn with mountain lion

Like me???
If you try to burn and mount the InstallESD.dmg with Disk Utility on a DVD with 4.7GB capacity, maybe you get a similar error like this: There is not enough space on the DVD
Does anybody know a solution for this or should I burn the image on a DL DVD?
read this:
http://macbookproearlytips.blogspot.com/2013/06/how-to-burn-iso-mac-osx-lion-to- dvd-47gb.html

Pioneer DVD-RW DVR-K05 superdrive can't erase or burn DVD-RW

I've noticed lots of users are having issues with their slot-loading superdrives and I'm wondering if anyone's issue matches this one:
I can successfully read and write: CD-R, CD-RW, DVD-R, DVD-DL and can READ an already burned DVD-RW, but I can't erase a DVD-RW that's already burned nor can I burn a blank DVD-RW. Inserting a blank DVD-RW results in ejecting the disc after about 30 seconds, no error messages, just ejects.
I've tried Maxell DVD-RW and Memorex DVD-RW. Same results.
An already burned DVD-RW (from a different burner) mounts fine on the desktop, but when I try to erase using Toast 7, I get the following message:
The drive reported an error:
Sense Key = ILLEGAL REQUEST
Sense Code = 0x30, 0x05
CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT
It recognizes that it's a DVD-RW, but treats it as though it were a DVD-R.
Using Disk Utility to erase results in a more generic error message:
Optical Erase failed with the error:
Optical Erase Failed
I had an online chat with an Apple rep who had me reset the PRAM, no change. Then we tried from another account, no change. Their next recommendation was to re-install the OS using Archive and Install, which I have my doubts about doing. Failing that, they recommend bringing the iMac in to a service store to possibly replace the drive. But based on what I've been reading about all the different superdrive problems users are having, I'm reluctant to even do that for fear of having an even worse problem with a different drive crop up at some point.
Has anyone out there had this exact problem and found a solution yet?
Seems like a simple firmware update for the drive could fix everything but I'm unable to find one.
Here's the drive specs from the Apple System Profiler:
PIONEER DVD-RW DVR-K05:
Firmware Revision: Q523
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No

hi there--
instead of just resetting pram i would try booting to
open firmware holding apple-option-o-f and then type
in the following commands--
reset-nvram (hit return)
set-defaults (hit return)
reset-all (hit return)
the last command restarts the computer. see if that
works. if it doesn't then try resetting the smu.
http://docs.info.apple.com/article.html?artnum=301733
there is a remote possibility that this is software
related, but it almost never is, and these things
are much more likely to resolve your problem than
doing an archive and install, and they are much less
hassle free. let me know if that works. [ 8 ) ]
OK, I booted into open firmware and did all the resets. No improvement. In fact, now I can't even mount some DVD-Rs that I had successfully burned before and mounted before. The drive has always been a little touchy with some discs, especially DVDs, but now seems to be even more hit-and-miss. CD-R and CD-RW reliably mount but DVDs have me worried. It took a long time for my OS X install disc to mount and display the window.
I think it may be time to take it in to Apple and replace it. I may also consider purchasing a Firewire burner with a tray!
Just wondering also if PatchBurn would fix this by creating a new profile or if this truly is a hardware issue. http://www.patchburn.de/
Thanks for your help.

Importing from burned DVDs

Hi,
I'm about to buy a Canopus ADVC300 to import old VHS home movies into FCE, but I'd also like to import footage from some full length burned DVDs so that I can add effects, titling etc. (They're school plays, so no copyright protections, etc.) Can I also use that device to import the DVDs? I'm not sure if it will work since the DVDs are technically already digital, but I'd like to be able to use the Canopus to clean up the inevitably shakiness and bad audio quality. Will this work? Can I just plug my DVD player into the Canopus the way I would a VCR? Is there a better solution that will maintain/clean up the quality?
Thanks!

Yes, you can plug your DVD player into the ADVC-300 just the same as your VCR.
An alternative which will be faster is MPEG Streamclip to directly convert the DVD video to DV or AIC for editing in Final Cut. MPEG Streamclip is free and exellent. However you may need to purchase the QuickTime MPEG2 Playback Component from Apple ($19.99) if you don't already have it installed on your Mac. (The conversion is faster because the ADVC works in real time as you play back the video on the VCR or DVD player; MPEG Streamclip can directly convert the video and audio from the files on the DVD).

Burned DVD's have momentary pixelation

Hi
When I export my project from FCPX everything is perfect. When I use IDVD to add theme and chapters there is pixelation for 2 minutes on the burned DVD at the exact same spot of my project every time. Even though the source is 100% it keeps occurring and it's a critical part of the project(wedding). What is going on?

Hi
How did You do the Export from FCP ?
I do
As Quicktime - NO QT-Converstion
And I do as SD-Video Quality - Feeding iDVD HD usually give bad result due to bad down scaling function
Free Space on BOOT hard disk ? How much ?
Is there a special with the material where problems arises ?
- Photos in any other format than .jpg
- Video Sequence - Video-CODEC and frame-rate here ?
- Special funcyion here as "Slow Down, Anti Shake etc) ?
- AUDIO - I only use 16-bit 48 or 44.1kHz .aiff - NO .mp3, .vma etc -
Yours Bengt W

Burned DVD does not work in all players

Hi all,
I am quite new to authoring my own DVDs, but since I married more or less recently I thought it is a nice idea to author a DVD with our wedding pictures for family and friends. So I spent enough time in iDVD selecting themes, slide shows, music etc. Finally a previewed everything and - yeah - happy.
So I wrote a disk image and burned this using the apple disk tool. So far so good. Mounting the newly recorded DVD workes perfect and the DVD player app works like no charm. Every menu, sound - as I want it.
Happy, running down to the living room and try it in the stand alone DVD player (Sony HD recorder) and - big disappointment. DVD runs, first menu pops up, and the slide show starts. But after the end, it does not return to the menu, it just keeps looping the slideshow. To make it even worse, the menu button on the remote just restarts the slideshow. What the f... is wrong?
Is there something I can to / configure to make it work correctly?
Any help is appreciated.
Thanks & Cheers,
Daniel

Daniel,
On your mac, open the disc image with apple's dvd player application. Assuming it plays exactly as expected and there are no issues with scene selections, buttons, etc.
Now you can use apple's disc utility (or Roxio Toast) to burn it to dvd-r. I recommend Verbatim, Taiyo Yuden, or Maxell for best results. Do not exceed 4x burn speed.
Let's say you get this far and the burned dvd plays perfectly on your mac. Now it's time to try it out on a set top dvd player. Sony makes some fantastic dvd players but I would try other players as well. Best place to do this is at a store that sells dvd players like Fry's Electronics, Best Buy, Walmart, or whatever stores are available in your own area.
Hand the dvd you created to a salesperson at one of these stores and ask the him/her to help you test drive a variety of set top dvd players to see which ones accept the dvd in question. My guess is that it will work fine on most of these players but if not just come on back for more help.
Message was edited by: SDMacuser

My mac is running 10.7.2 and wondering why the "find my mac" feature is not working. Instead, it says I need to system upgrade requires.. I believe it's already upgraded together with the 10.7.2

My mac is running 10.7.2 and wondering why the "find my mac" feature is not working. Instead, it says I need to system upgrade requires.. I believe it's already upgraded together with the 10.7.2

i get the spinning beach ball in all of my applications
have a look at this article: Troubleshoot the spinning beach ball

I have purchased Adobe premiere element 12. Why can't I burn a CD or DVD? Do I need an additional program?

I have purchased Adobe premiere element 12. Why can't I burn a CD or DVD? Do I need an additional program?

See here:
Adobe Premiere Elements Help | Sharing to DVD or Blu-ray Disc

I can not burn dvds anylonger with my MacPro. Why ?

Hi everyone. I already posted this message in another thread but got no useful replies.
Configuration: MacPro Early 2008, MacOSX 10.6.8
I can not burn dvds anymore and do not know why. I can play dvds and cds though!
The following is the usual error message displaying after clicking the button burn :
I have run Disk Utility from the Install cd of Snow Leopard and the small things which needed repairs have been repaired.
I have reset the PRAM and the SMC (System Management Controller). Nothing.
I have set up a new user account with admin privileges but it did not work.
Please, note that I am trying to burn the same Kodak Pro dvds for photo and data archival that I burned in the past in the same MacPro.
I am actually burning my dvds using my MacBook Pro connected with my MacPro through Airport but it's a very slow process, of course.
Any piece of advice ?
Thank you !
Paolo

Hi everyone. I already posted this message in another thread but got no useful replies.
Configuration: MacPro Early 2008, MacOSX 10.6.8
I can not burn dvds anymore and do not know why. I can play dvds and cds though!
The following is the usual error message displaying after clicking the button burn :
I have run Disk Utility from the Install cd of Snow Leopard and the small things which needed repairs have been repaired.
I have reset the PRAM and the SMC (System Management Controller). Nothing.
I have set up a new user account with admin privileges but it did not work.
Please, note that I am trying to burn the same Kodak Pro dvds for photo and data archival that I burned in the past in the same MacPro.
I am actually burning my dvds using my MacBook Pro connected with my MacPro through Airport but it's a very slow process, of course.
Any piece of advice ?
Thank you !
Paolo

Do I really need to buy an external drive to burn DVDs on my eMac (10.4)?

I have been trying to burn DVDs (using DVD-Rs, not DVD+Rs) on my eMac (OS 10.4) without success. The machine just acts as if nothing has been put in the drive; it whirrs and whirrs, no icon appears, no error message, nothing, until after half an hour or so I have to just eject it. On another forum, I was told that the problem was probably that my eMac can't recognize blank DVD-Rs, let alone burn them, without an external drive that has to be purchased separately. I want to be sure that's really true before buying anything, needless to say!
Another string on this forum suggested looking under "optical drive" under "About This Mac" to find out this kind of thing. I see nothing that specifically says "optical drive," but under Hardware and Disc Burning, it says:
HL-DT-ST RW/DVD GCC-4481B:
Firmware Revision: 2.05
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
Burn Underrun Protection CD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw
Media: No
Is this enough information for someone to please be able to tell me whether I do indeed need to buy an external disc drive before I can burn DVDs?
(And, if so, what kind of drive is recommended?)
Thanks in advance for any help.
Chris Roth
[email protected]

While you can replace the intenal drive, opening up an eMac is not a trivial process and it's far easier to add an external drive. Go with Firewire rather than USB, even if your eMac is USB 2.0; support for Firewire under OS X is better and more stable.You can get a Firewire enclosure for around US$30 to $40 and a bare DVD-RW/CD-RW for about the same; or buy a complete system for around US$130 to $200 depending on features such as third-party burning software (Toast) or built-in label making with special DVD-R or CD-R blanks (LightScribe). OS X 10.3.3 and higher (which of course includes the 10.4 in your profile) includes native support for DVD-R burning, so you don't strictly need third-party software such as Toast, but Toast is more flexible than the built-in burner and allows for packing more data on a disc since Toast has better control over the disc's directory size. LightScribe is an appealing idea, but slow, and the blanks are expensive. When consideringf whether to roll your own, so to speak, with an enclosure and bare drive, don't overlook that you'll need a good-quality Firewire cable; cheap cables can cause a surprising amount of grief. Unless you have a bare DVD-RW drive handy, I persoanlly find the convenience of a commercial drive, with cable and power supply/cord already packaged together, outweighs the savings of assembling a drive yourself. I'm partial to LaCie D2 Firewire drives myself, but there are other models that work fine.

Why are burned DVD's poor quality from the IDVD?

I made a slideshow in iphoto and exported to IDVD so I could burn copies. The show lloked great on screen but the first copies on dvd's were terrible. The quality of images are very poor and seem to be depixilated? Why would the copies be so poor? Does the widescreen or standard have something to do with it??
Help

Hi
There are levels in h*e*l*l*
iDVD - is same as DVD Standard - Interlaced SD-Video
Feeding iDVD progressive or HD material will not improve result but degrade this as from
- iMovie'08 to 11 - as they can not deliver - but only every second line of the picture
- iDVD downscaling from HD - is doing a bad job
So by using a program that can deliver - best possibly DVD is the result
- iMovie HD6
- FinalCut any version
- FotoMagico™ - (for SlideShows)
If this is not enough - then DVD is no option as HD-DVD is rare and needs special HD-DVD-players - alt
• Blu-Ray e.g. from Roxio Toast™ but still needs BD-Player as PlayStation3 etc
• out in high quality to USB-memory to be played on device that can do this
• Play via MacBook and out to a HD-projector/TV
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

Already burned dvd, wondering why is needs to redo menus, etc next time

Similar Messages

Maybe you are looking for